[linux-dvb] DTV with keyboard input

[Andreas Hoelscher <Andreas@griemel.oche.de>]

                                         Aachen, Mo 18.06.01 20:16

Hi,
I want to use the programm dtv (1.1.0) on my desktop PC. I have a new  
Haupauge card (DVB-S), kernel 2.4.3 and dvb 0.9.

1. I start the dvb driver (make insmod)
2. I start xawtv
3. I start "dvt -v6" in a x-terminal (konsole)

now I can type in exactly one number key and the expected station will  
be tuned in and I can see the osd for a short time.

After that I can't do anything with dvt. No channel switching at all.

dtv.log shows the following:

18/06/01 20:10.04: dtv started
18/06/01 20:10.04: InputEvent: 0008
18/06/01 20:10.05: InputEvent: 0000
[a lot of]
18/06/01 20:10.09: channel info Das Erste
18/06/01 20:10.09: InputEvent: 0000
[a lot of]
18/06/01 20:10.10: InputEvent: 0000
18/06/01 20:10.11: InpDev Pfo GetSDT
18/06/01 20:10.11: Service 28106 identified
18/06/01 20:10.11: InpDev Pfo GetPAT
18/06/01 20:10.11: Program 28106 identified
18/06/01 20:10.11: InpDev Pfo GetTVPMT
18/06/01 20:10.11: Corrected VtxPID to 104
18/06/01 20:10.11: Service 28106 Pid: Video 101
18/06/01 20:10.11: Service 28106 Pid: Audio 102
18/06/01 20:10.12: InpDev Pfo GetTVEIT
18/06/01 20:10.12: InpDev Pfo GetTVEIT
18/06/01 20:10.12: Programinfo aquisition stopped (2 events)
18/06/01 20:10.13: InpDev Eit Get_EIT_ACT
18/06/01 20:10.13: info cleared
18/06/01 20:10.13: InpDev Eit Get_EIT_ACT
18/06/01 20:10.13: ProgramInfo added for Das Erste
18/06/01 20:10.13: ProgramInfo added for Das Erste
18/06/01 20:10.13: InpDev Eit Get_EIT_ACT
18/06/01 20:10.14: present/following info
18/06/01 20:10.14: InpDev Eit Get_EIT_ACT
[a lot of]
18/06/01 20:10.17: InpDev Eit Get_EIT_ACT
18/06/01 20:10.17: ProgramInfo added for WDR FERNSEHEN
18/06/01 20:10.17: ProgramInfo added for WDR FERNSEHEN
18/06/01 20:10.18: InpDev Eit Get_EIT_ACT
18/06/01 20:10.18: info cleared
18/06/01 20:10.18: InpDev Eit Get_EIT_ACT
18/06/01 20:10.18: ProgramInfo added for Das Erste
18/06/01 20:10.18: ProgramInfo added for Das Erste
18/06/01 20:10.18: InpDev Eit Get_EIT_ACT
18/06/01 20:10.18: InpDev Eit Get_EIT_ACT
18/06/01 20:10.19: InpDev Eit Get_EIT_ACT
18/06/01 20:10.19: InpDev Eit Get_EIT_ACT
18/06/01 20:10.19: InpDev Eit Get_EIT_ACT
18/06/01 20:10.20: InpDev Eit Get_EIT_ACT
18/06/01 20:10.20: InpDev Eit Get_EIT_OTH
18/06/01 20:10.24: InpDev Eit Get_EIT_OTH
18/06/01 20:10.24: InpDev Eit Get_EIT_OTH
18/06/01 20:10.24: InpDev Eit Get_EIT_OTH
18/06/01 20:10.27: InpDev Eit Get_EIT_OTH

at this moment the log output stops and nothng happens any more.

My dtv.conf is as follows (without comments):

set outdev0 [open_output DVBS 0]
add_processor -all TDT
add_processor -all PFO
add_processor -all EIT
add_processor -all VTX
source available_channels.dcl
source channel_list.dcl
add_channel_list -all $channel_list
set indev2 [open_input KEYBOARD]
set rmtctrl [open_input TCPIP 30000]
add_implication $outdev0 $indev2


Any hint what I did wrong?
Is there a key to get an on screen menu (except a station number)?

Andreas
-- 
Andreas Hoelscher, Buchenhain 8a, D-52159 Roetgen, Germany
(PGP ID: 1024/0x6AC897BB)


-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject.