[linux-dvb] Re: Two DVB-s: what's wrong

[Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de>]

Uwe Heinrich wrote:
> 
> Hello,
> finally I got my second Hauppauge DVB-s.
> When tried to test the parallel replay / record feature I got the message
> below:
> I've an old and a new DVB-s. Each one is working- I tested seperately.
> DVB-driver is the mix of Martin Hoffmann (2001-07-05): most parts from
> 25.06. and some from today's CVS.
> I tried some older / newer drivers- same result.
> Did I miss something or is there a special trick?
> 
> best regards
> Uwe
> 
> Jul 10 20:09:55 tvserver vdr[2989]: VDR version 0.83 started
> Jul 10 20:09:55 tvserver vdr[2989]: loading /video/setup.conf
> Jul 10 20:09:55 tvserver vdr[2989]: loading /video/channels.conf
> Jul 10 20:09:55 tvserver vdr[2989]: loading /video/timers.conf
> Jul 10 20:09:55 tvserver vdr[2989]: loading /video/commands.conf
> Jul 10 20:09:55 tvserver vdr[2989]: probing /dev/ost/qpskfe0
> Jul 10 20:09:55 tvserver vdr[2991]: EIT processing thread started
> (pid=2991) - master
> Jul 10 20:09:55 tvserver vdr[2989]: probing /dev/ost/qpskfe1
> Jul 10 20:09:55 tvserver vdr[2992]: EIT processing thread started (pid=2992)
> Jul 10 20:09:55 tvserver vdr[2989]: found 2 video devices
> Jul 10 20:09:55 tvserver vdr[2989]: setting primary DVB to 1
> Jul 10 20:09:55 tvserver vdr[2989]: switching to channel 5
> Jul 10 20:09:55 tvserver vdr[2993]: LIRC remote control thread started
> (pid=2993)
> Jul 10 20:09:55 tvserver vdr[2989]: SVDRP listening on port 2001
> Jul 10 20:09:55 tvserver vdr[2989]: setting watchdog timer to 60 seconds
> Jul 10 20:10:03 tvserver vdr[2989]: max. latency time 1 seconds
> Jul 10 20:10:12 tvserver vdr[2989]: timer 2 start
> Jul 10 20:10:12 tvserver vdr[2989]: switching to channel 5
> Jul 10 20:10:12 tvserver vdr[2989]: record
> /video/@RTL2/2001-07-10.20:10.50.50.rec
> Jul 10 20:10:12 tvserver vdr[2989]: creating directory /video/@RTL2
> Jul 10 20:10:12 tvserver vdr[2989]: creating directory
> /video/@RTL2/2001-07-10.20:10.50.50.rec
> Jul 10 20:10:12 tvserver vdr[2989]: recording to
> '/video/@RTL2/2001-07-10.20:10.50.50.rec/001.vdr'
> Jul 10 20:10:12 tvserver vdr[2994]: output thread started (pid=2994)
> Jul 10 20:10:12 tvserver vdr[2995]: input thread started (pid=2995)
> Jul 10 20:10:41 tvserver vdr[2989]: ERROR: StartReplay() called while
> recording - ignored!

Please check the line in channels.conf for RTL2.
If it contains '1' in the Ca parameter field, change that to '0'.
The same would apply to any other non-encrypted channels.

Klaus
-- 
_______________________________________________________________

Klaus Schmidinger                       Phone: +49-8635-6989-10
CadSoft Computer GmbH                   Fax:   +49-8635-6989-40
Hofmark 2                               Email:   kls@cadsoft.de
D-84568 Pleiskirchen, Germany           URL:     www.cadsoft.de
_______________________________________________________________


-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject.