[linux-dvb] ÿso-8859-1?Q?RE:_[linux-dvb]_make_insmod_error_:_deb? i test in bootarm() failed: 00000000 !ñ0325476

[LEGOUIX Samuel FTRD/DMI/CAE <samuel.legouix@rd.francetelecom.com>]

Unset PnP OS is ok : i can open all /dev/ost/*.
thank you very much
bye

> -----Message d'origine-----
> De : Henrik Rasmussen [mailto:linuxtv@drv-elektronik.dk]
> Envoyé : lundi 16 juillet 2001 17:46
> À : LEGOUIX Samuel FTRD/DMI/CAE; linux-dvb@linuxtv.org
> Objet : SV: [linux-dvb] make insmod error : debi test in bootarm()
> failed: 00000000 !ñ0325476
> 
> 
> I had this error in the beginning. It turned out that my bios 
> was setup for
> a PnP OS and therefore did not assign an irq to the DVB card. 
> Changing that
> bios setting to Non-PnP OS did the trick for me.
> 
> Regards,
> 
> Henrik Rasmussen
> 
> > -----Oprindelig meddelelse-----
> > Fra: linux-dvb-bounce@linuxtv.org
> > [mailto:linux-dvb-bounce@linuxtv.org]På vegne af LEGOUIX Samuel
> > FTRD/DMI/CAE
> > Sendt: 16. juli 2001 17:38
> > Til: 'linux-dvb@linuxtv.org'
> > Emne: [linux-dvb] make insmod error : debi test in bootarm() failed:
> > 00000000 !ñ0325476
> >
> >
> > Hi,
> >
> > I am trying to set up an hauppauge wintv dvbs card. Driver 
> compilation is
> > ok, but I've got the following output when I am doing a 
> 'make insmod' :
> >
> > ==cut===
> > [root@localhost driver]# make insmod
> > i2c-core.o: driver VES1893 DVB DECODER registered.
> > i2c-core.o: driver VES1820 DVB DECODER registered.
> > i2c-core.o: driver stv0299 DVB DECODER registered.
> > i2c-core.o: driver i2c TV tuner driver registered.
> > saa7146_core.o: saa7146(1): bus:1, rev:1, mem:0xd08ce400.
> > i2c-dev.o: Registered 'saa7146(1)' as minor 0
> > i2c-core.o: adapter saa7146(1) registered as adapter 0.
> > wait-for-debi-done maxwait: 500000
> > dvb: debi test in bootarm() failed: 00000000 != 10325476
> > dvb: 1 dvb(s) found!
> > [root@localhost driver]#
> > ==cut===
> >
> > I can't open any /dev/ost/* devices. I don't find useful 
> information in
> > mailing-lists so you are my last option.
> >
> > Attached files are the outputs from the following script 
> before and after
> > doing 'make insmod', and the diff between both outputs :
> >
> > ===cut===
> > #!/bin/bash
> > find /proc/ | grep -v "/proc/[0-9]"
> > cat /proc/version
> > cat /proc/cpuinfo
> > cat /proc/devices
> > cat /proc/interrupts
> > cat /proc/iomem
> > cat /proc/ioports
> > cat /proc/modules
> > cat /proc/pci
> > cat /var/log/messages
> > ===cut===
> >
> > thank you all.
> >
> > > Samuel Legouix
> > > France Telecom R&D Caen, DMI/SIR/WEI
> > > 42 rue des coutures B.P. 6243 14066 - CAEN Cedex 4 - France
> > > samuel.legouix@rd.francetelecom.com
> > 		 <<after.txt>>  <<before.txt>>  <<diff.txt>>
> >
> >
> >
> > -- No attachments (even text) are allowed --
> > -- Type: text/plain
> > -- File: after.txt
> >
> >
> > -- No attachments (even text) are allowed --
> > -- Type: text/plain
> > -- File: before.txt
> >
> >
> > -- No attachments (even text) are allowed --
> > -- Type: text/plain
> > -- File: diff.txt
> >
> >
> >
> > --
> > Info:
> > To unsubscribe send a mail to listar@linuxtv.org with
> > "unsubscribe linux-dvb" as subject.
> >
> 


--
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject.