|
Hello everybody,
I hate to do it, But I need help. I've been
at this same point for over 4 days now, and I'm not getting any
farther.
I'm trying to load up a system with a Nexus-s DVB card and Leadtek Winfast TV 2000/XP, M-Audio Revolution 7.1 and MSI GeForce 5200. I can get everything to work fine except the Nexus. I'm running Fedora Core 2, with Kernel 2.6.6 compiled with the DVB drivers. I also did compile the firmware prior to compiling the kernel, and placed it in the proper hotplug/firmware directory as described in the dvb driver package. But After compiling and trying to run the scan utility, I keep getting this message about the frontend, and no answer I've found can get rid of it. I've tried reloading Fedora about 6 times, both with and without compiling the drivers into the kernel, and trying different proposed solutions I've found via google. Can anybody point me in the right direction? [root@S01060001024c0a06 scan]# ./scan
dvb-s/Echostar.7 | tee mychannels.conf
scanning dvb-s/Echostar.7 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' main:1882: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 19 No such device Here are some of my outputs...Does anybody see
something wrong? Sorry about not cutting then down some, I don't really
know what is relevant or not.
[mythtv@S01060001024c0a06 mythtv]$
lsmod
Module Size Used by ves1x93 12432 0 stv0299 17160 0 dvb_core 82604 2 ves1x93,stv0299 snd_ice1724 38596 0 snd_ice17xx_ak4xxx 7552 1 snd_ice1724 snd_ac97_codec 60548 1 snd_ice1724 snd_pcm 87428 1 snd_ice1724 snd_page_alloc 13316 1 snd_pcm snd_timer 25092 1 snd_pcm snd_ak4xxx_adda 9600 2 snd_ice1724,snd_ice17xx_ak4xxx snd_mpu401_uart 9984 1 snd_ice1724 snd_rawmidi 23712 1 snd_mpu401_uart snd_seq_device 11016 1 snd_rawmidi snd 49380 8 snd_ice1724,snd_ac97_codec,snd_pcm,snd_timer,snd_ak4xxx_adda,snd_mpu401_uart,snd_rawmidi,snd_seq_device soundcore 11360 1 snd parport_pc 25536 1 lp 13580 0 parport 37576 2 parport_pc,lp autofs4 17152 0 sunrpc 123464 1 3c59x 38568 0 ipt_REJECT 9728 1 ipt_state 5888 6 ip_conntrack 33292 1 ipt_state iptable_filter 6528 1 ip_tables 20096 3 ipt_REJECT,ipt_state,iptable_filter floppy 58096 0 sg 36512 0 microcode 11296 0 dm_mod 42144 0 uhci_hcd 31632 0 button 9112 0 battery 11532 0 asus_acpi 13080 0 ac 7692 0 tuner 20620 0 bttv 144204 0 video_buf 20484 1 bttv i2c_algo_bit 12552 1 bttv v4l2_common 9344 1 bttv btcx_risc 8200 1 bttv i2c_core 24964 5 ves1x93,stv0299,tuner,bttv,i2c_algo_bit videodev 11648 1 bttv nvidia 1616200 8 ipv6 240096 10 ext3 108904 4 jbd 57112 1 ext3 [mythtv@S01060001024c0a06 mythtv]$ [root@S01060001024c0a06 scan]#
dmesg
device. ID = 'vcsa3' class_hotplug - name = vcsa3 device class 'vcsa3': release. CLASS: registering class device: ID = 'vcs4' class_hotplug - name = vcs4 CLASS: registering class device: ID = 'vcsa4' class_hotplug - name = vcsa4 CLASS: Unregistering class device. ID = 'vcs4' class_hotplug - name = vcs4 device class 'vcs4': release. CLASS: Unregistering class device. ID = 'vcsa4' class_hotplug - name = vcsa4 device class 'vcsa4': release. CLASS: registering class device: ID = 'vcs5' class_hotplug - name = vcs5 CLASS: registering class device: ID = 'vcsa5' class_hotplug - name = vcsa5 CLASS: Unregistering class device. ID = 'vcs5' class_hotplug - name = vcs5 device class 'vcs5': release. CLASS: Unregistering class device. ID = 'vcsa5' class_hotplug - name = vcsa5 device class 'vcsa5': release. CLASS: registering class device: ID = 'vcs6' class_hotplug - name = vcs6 CLASS: registering class device: ID = 'vcsa6' class_hotplug - name = vcsa6 CLASS: Unregistering class device. ID = 'vcs6' class_hotplug - name = vcs6 device class 'vcs6': release. CLASS: Unregistering class device. ID = 'vcsa6' class_hotplug - name = vcsa6 device class 'vcsa6': release. CLASS: registering class device: ID = 'vcs7' class_hotplug - name = vcs7 CLASS: registering class device: ID = 'vcsa7' class_hotplug - name = vcsa7 CLASS: Unregistering class device. ID = 'vcs7' class_hotplug - name = vcs7 device class 'vcs7': release. CLASS: Unregistering class device. ID = 'vcsa7' class_hotplug - name = vcsa7 device class 'vcsa7': release. CLASS: registering class device: ID = 'vcs8' class_hotplug - name = vcs8 CLASS: registering class device: ID = 'vcsa8' class_hotplug - name = vcsa8 CLASS: Unregistering class device. ID = 'vcs8' class_hotplug - name = vcs8 device class 'vcs8': release. CLASS: Unregistering class device. ID = 'vcsa8' class_hotplug - name = vcsa8 device class 'vcsa8': release. NET: Registered protocol family 10 Disabled Privacy Extensions on device c0361500(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 CLASS: registering class device: ID = 'sit0' class_hotplug - name = sit0 CLASS: registering class device: ID = 'vcs8' class_hotplug - name = vcs8 CLASS: registering class device: ID = 'vcsa8' class_hotplug - name = vcsa8 nvidia: module license 'NVIDIA' taints kernel. 0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4363 Sat Apr 19 17:46:46 PDT 2003 agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:02:00.0 into 4x mode Linux video capture interface: v1.00 device class 'video4linux': registering bus type 'i2c' registered bus i2c: add driver i2c_adapter device class 'i2c-adapter': registering bttv: driver version 0.9.14 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bus type 'bttv-sub' registered bus pci: add driver bttv bttv: Bt8xx card found (0). PCI: Enabling device 0000:01:01.0 (0000 -> 0002) bttv0: Bt878 (rev 17) at 0000:01:01.0, irq: 7, latency: 132, mmio: 0xf0000000 bttv0: detected: Leadtek WinFast TV 2000 [card=34], PCI subsystem ID is 107d:6606 bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00bf7707 [init] DEV: registering device: ID = 'i2c-0' PM: Adding info for No Bus:i2c-0 CLASS: registering class device: ID = 'i2c-0' class_hotplug - name = i2c-0 i2c_adapter i2c-0: registered as adapter #0 bttv0: using tuner=5 bttv0: i2c: checking for MSP34xx @ 0x80... <7>i2c_adapter i2c-0: master_recv: reading 1 bytes. i2c_adapter i2c-0: master_recv: return:-121 (count:1, addr:0x40) not found bttv0: i2c: checking for TDA9875 @ 0xb0... <7>i2c_adapter i2c-0: master_recv: reading 1 bytes. i2c_adapter i2c-0: master_recv: return:-121 (count:1, addr:0x58) not found bttv0: i2c: checking for TDA7432 @ 0x8a... <7>i2c_adapter i2c-0: master_recv: reading 1 bytes. i2c_adapter i2c-0: master_recv: return:-121 (count:1, addr:0x45) not found bus i2c: add driver i2c TV tuner driver i2c-core: driver i2c TV tuner driver registered. i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 0060 i2c_adapter i2c-0: master_xfer: with 1 msgs. i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 0061 i2c_adapter i2c-0: master_xfer: with 1 msgs. tuner: chip found at addr 0xc2 i2c-bus bt878 #0 [sw] tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) by bt878 #0 [sw] i2c_adapter i2c-0: client [Philips PAL_BG (FI1216 and compatibles)] registered to adapter registering 0-0061 DEV: registering device: ID = '0-0061' PM: Adding info for i2c:0-0061 bus i2c: add device 0-0061 bound device '0-0061' to driver 'i2c TV tuner driver' i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 0062 i2c_adapter i2c-0: master_xfer: with 1 msgs. i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 0063 i2c_adapter i2c-0: master_xfer: with 1 msgs. i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 0064 i2c_adapter i2c-0: master_xfer: with 1 msgs. i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 0065 i2c_adapter i2c-0: master_xfer: with 1 msgs. i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 0066 i2c_adapter i2c-0: master_xfer: with 1 msgs. i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 0067 i2c_adapter i2c-0: master_xfer: with 1 msgs. i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 0068 i2c_adapter i2c-0: master_xfer: with 1 msgs. i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 0069 i2c_adapter i2c-0: master_xfer: with 1 msgs. i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 006a i2c_adapter i2c-0: master_xfer: with 1 msgs. i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 006b i2c_adapter i2c-0: master_xfer: with 1 msgs. i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 006c i2c_adapter i2c-0: master_xfer: with 1 msgs. i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 006d i2c_adapter i2c-0: master_xfer: with 1 msgs. i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 006e i2c_adapter i2c-0: master_xfer: with 1 msgs. i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 006f i2c_adapter i2c-0: master_xfer: with 1 msgs. CLASS: registering class device: ID = 'video0' class_hotplug - name = video0 bttv0: registered device video0 CLASS: registering class device: ID = 'vbi0' class_hotplug - name = vbi0 bttv0: registered device vbi0 CLASS: registering class device: ID = 'radio0' class_hotplug - name = radio0 bttv0: registered device radio0 bttv0: PLL: 28636363 => 35468950 .. ok bttv0: add subdevice "remote0" DEV: registering device: ID = 'remote0' PM: Adding info for bttv-sub:remote0 bus bttv-sub: add device remote0 bound device '0000:01:01.0' to driver 'bttv' ACPI: Power Button (FF) [PWRF] USB Universal Host Controller Interface driver v2.2 bus pci: add driver uhci_hcd uhci_hcd 0000:00:1f.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1f.2 to 64 uhci_hcd 0000:00:1f.2: irq 11, io base 00001820 CLASS: registering class device: ID = 'usb1' class_hotplug - name = usb1 uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 DEV: registering device: ID = 'usb1' PM: Adding info for usb:usb1 bus usb: add device usb1 bound device 'usb1' to driver 'usb' DEV: registering device: ID = '1-0:1.0' PM: Adding info for usb:1-0:1.0 bus usb: add device 1-0:1.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected bound device '1-0:1.0' to driver 'hub' bound device '0000:00:1f.2' to driver 'uhci_hcd' EXT3 FS on hda2, internal journal CLASS: registering class device: ID = 'device-mapper' class_hotplug - name = device-mapper device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com cdrom: open failed. Adding 524152k swap on /dev/hda3. Priority:-1 extents:1 kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. CLASS: Unregistering class device. ID = 'vcs1' class_hotplug - name = vcs1 device class 'vcs1': release. CLASS: Unregistering class device. ID = 'vcsa1' class_hotplug - name = vcsa1 device class 'vcsa1': release. CLASS: registering class device: ID = 'microcode' class_hotplug - name = microcode IA-32 Microcode Update Driver: v1.13 <tigran@veritas.com> microcode: CPU0 already at revision 0x1 (current=0x1) microcode: No suitable data for cpu 0 bus pnp: add driver parport_pc parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] bus pci: add driver parport_pc bus pci: remove driver parport_pc bus pnp: remove driver parport_pc device class 'scsi_generic': registering inserting floppy driver for 2.6.6-Mythtv-v1 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 Registering platform device 'floppy0'. Parent at platform DEV: registering device: ID = 'floppy0' PM: Adding info for platform:floppy0 bus platform: add device floppy0 bus pci: add driver 3c59x 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:01:04.0: 3Com PCI 3c905C Tornado at 0x2000. Vers LK1.1.19 divert: allocating divert_blk for eth0 CLASS: registering class device: ID = 'eth0' class_hotplug - name = eth0 bound device '0000:01:04.0' to driver '3c59x' bus pci: remove driver 3c59x divert: freeing divert_blk for eth0 class_hotplug - name = eth0 device class 'eth0': release. ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (4095 buckets, 32760 max) - 300 bytes per conntrack bus pci: add driver 3c59x 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:01:04.0: 3Com PCI 3c905C Tornado at 0x2000. Vers LK1.1.19 divert: allocating divert_blk for eth0 CLASS: registering class device: ID = 'eth0' class_hotplug - name = eth0 bound device '0000:01:04.0' to driver '3c59x' device class 'printer': registering bus pnp: add driver parport_pc parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] bus pci: add driver parport_pc CLASS: registering class device: ID = 'lp0' class_hotplug - name = lp0 lp0: using parport0 (polling). lp0: console ready eth0: no IPv6 routers present CLASS: Unregistering class device. ID = 'vcs8' class_hotplug - name = vcs8 device class 'vcs8': release. CLASS: Unregistering class device. ID = 'vcsa8' class_hotplug - name = vcsa8 device class 'vcsa8': release. CLASS: registering class device: ID = 'vcs1' class_hotplug - name = vcs1 CLASS: registering class device: ID = 'vcs2' class_hotplug - name = vcs2 CLASS: registering class device: ID = 'vcs3' class_hotplug - name = vcs3 CLASS: registering class device: ID = 'vcs4' class_hotplug - name = vcs4 CLASS: registering class device: ID = 'vcs5' class_hotplug - name = vcs5 CLASS: registering class device: ID = 'vcsa1' class_hotplug - name = vcsa1 CLASS: registering class device: ID = 'vcsa2' class_hotplug - name = vcsa2 CLASS: registering class device: ID = 'vcsa3' class_hotplug - name = vcsa3 CLASS: registering class device: ID = 'vcsa4' class_hotplug - name = vcsa4 CLASS: registering class device: ID = 'vcsa5' class_hotplug - name = vcsa5 CLASS: Unregistering class device. ID = 'vcs1' class_hotplug - name = vcs1 device class 'vcs1': release. CLASS: Unregistering class device. ID = 'vcsa1' class_hotplug - name = vcsa1 device class 'vcsa1': release. CLASS: registering class device: ID = 'vcs1' class_hotplug - name = vcs1 CLASS: Unregistering class device. ID = 'vcs2' class_hotplug - name = vcs2 CLASS: registering class device: ID = 'vcsa1' class_hotplug - name = vcsa1 device class 'vcs2': release. CLASS: Unregistering class device. ID = 'vcsa2' class_hotplug - name = vcsa2 device class 'vcsa2': release. CLASS: registering class device: ID = 'vcs2' class_hotplug - name = vcs2 CLASS: Unregistering class device. ID = 'vcs3' class_hotplug - name = vcs3 CLASS: registering class device: ID = 'vcsa2' class_hotplug - name = vcsa2 device class 'vcs3': release. CLASS: Unregistering class device. ID = 'vcsa3' class_hotplug - name = vcsa3 device class 'vcsa3': release. CLASS: registering class device: ID = 'vcs3' class_hotplug - name = vcs3 CLASS: Unregistering class device. ID = 'vcs4' class_hotplug - name = vcs4 CLASS: registering class device: ID = 'vcsa3' class_hotplug - name = vcsa3 device class 'vcs4': release. CLASS: Unregistering class device. ID = 'vcsa4' class_hotplug - name = vcsa4 device class 'vcsa4': release. CLASS: registering class device: ID = 'vcs4' class_hotplug - name = vcs4 CLASS: Unregistering class device. ID = 'vcs5' class_hotplug - name = vcs5 CLASS: registering class device: ID = 'vcsa4' class_hotplug - name = vcsa4 device class 'vcs5': release. CLASS: Unregistering class device. ID = 'vcsa5' class_hotplug - name = vcsa5 device class 'vcsa5': release. CLASS: registering class device: ID = 'vcs6' class_hotplug - name = vcs6 CLASS: registering class device: ID = 'vcsa6' class_hotplug - name = vcsa6 CLASS: Unregistering class device. ID = 'vcs6' class_hotplug - name = vcs6 device class 'vcs6': release. CLASS: Unregistering class device. ID = 'vcsa6' class_hotplug - name = vcsa6 device class 'vcsa6': release. CLASS: registering class device: ID = 'vcs6' class_hotplug - name = vcs6 CLASS: registering class device: ID = 'vcsa6' class_hotplug - name = vcsa6 CLASS: registering class device: ID = 'vcs5' class_hotplug - name = vcs5 CLASS: registering class device: ID = 'vcsa5' class_hotplug - name = vcsa5 CLASS: registering class device: ID = 'vcs7' class_hotplug - name = vcs7 CLASS: registering class device: ID = 'vcsa7' class_hotplug - name = vcsa7 CLASS: Unregistering class device. ID = 'vcs7' class_hotplug - name = vcs7 device class 'vcs7': release. CLASS: Unregistering class device. ID = 'vcsa7' class_hotplug - name = vcsa7 device class 'vcsa7': release. CLASS: registering class device: ID = 'vcs7' class_hotplug - name = vcs7 CLASS: registering class device: ID = 'vcsa7' class_hotplug - name = vcsa7 agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:02:00.0 into 4x mode device class 'sound': registering CLASS: registering class device: ID = 'controlC0' class_hotplug - name = controlC0 CLASS: registering class device: ID = 'timer' class_hotplug - name = timer bus pci: add driver ICE1724 PCI: Enabling device 0000:01:02.0 (0000 -> 0001) CLASS: registering class device: ID = 'pcmC0D2p' class_hotplug - name = pcmC0D2p CLASS: registering class device: ID = 'pcmC0D1p' class_hotplug - name = pcmC0D1p CLASS: registering class device: ID = 'pcmC0D0p' class_hotplug - name = pcmC0D0p CLASS: registering class device: ID = 'pcmC0D0c' class_hotplug - name = pcmC0D0c bound device '0000:01:02.0' to driver 'ICE1724' bus i2c: add driver stv0299 i2c-core: driver stv0299 registered. i2c_adapter i2c-0: master_xfer: with 1 msgs. i2c_adapter i2c-0: master_xfer: with 2 msgs. [root@S01060001024c0a06 scan]# ls
/dev/dvb/adapter0
audio0 ca0 demux0 dvr0 frontend0 net0 osd0 video0 Any help would be greatly appreciated. I'm at
my wits end here.
Xar256 |