[linux-dvb] Pinnacle PCTV Sat doesn't work on kernel 2.6 -> adapter0 is not a device

[Till Fischer <till.fischer@gmx.de>]

Hi,

I have a problem, I don't get my Pinnacle PCTV Sat to work on Linux kernel 
2.6. In my desperation I tried to load nearly every module I found in the dvb 
folder. After loading every module I tried whether the DVB-card works, but it 
did never. So the loaded dvb modules are right now:


ves1820                 7172  0
stv0299                11784  0
sp887x                  6916  0
nxt6000                 8580  0
mt312                   6916  0
grundig_29504_491       5764  0
grundig_29504_401       7428  0
at76c651                5640  0
alps_tdmb7              5892  0
alps_tdlb7              8336  0
dst                    13452  0
dvb_bt8xx               8068  0
cx24110                 7960  0
ves1x93                 7696  0
dvb_ttpci              64652  0
dvb_core               77096  15 
ves1820,stv0299,sp887x,nxt6000,mt312,grundig_29504_491,grundig_29504_401,at76c651,alps_tdmb7,alps_tdlb7,dst,dvb_bt8xx,cx24110,ves1x93,dvb_ttpci
saa7146_vv             44672  1 dvb_ttpci
saa7146                17828  2 dvb_ttpci,saa7146_vv
v4l1_compat            13572  1 saa7146_vv
firmware_class          9728  1 dvb_ttpci
crc32                   4608  2 dvb_ttpci,dvb_core
ttpci_eeprom            2816  1 dvb_ttpci
bt878                  11184  2 dst,dvb_bt8xx
snd_bt87x              12868  0
bttv                  141036  2 dvb_bt8xx,bt878
video_buf              19588  2 saa7146_vv,bttv
i2c_algo_bit            8968  1 bttv
v4l2_common             6400  2 saa7146_vv,bttv
btcx_risc               4744  1 bttv
i2c_core               21764  3 dvb_bt8xx,bttv,i2c_algo_bit
videodev                9728  2 saa7146_vv,bttv

dmesg says:

bttv: driver version 0.9.14 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:00:08.0, irq: 19, latency: 32, mmio: 0xdddfe000
bttv0: detected: Pinnacle PCTV Sat [card=94], PCI subsystem ID is 11bd:001c
bttv0: using: Pinnacle PCTV Sat [card=94,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=009f00fc [init]
bttv0: using tuner=-1
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
bt878:  AUDIO driver version 0.0.0 loaded
dvb_bt8xx: unable to determine DMA core of card 0
attach: checking "bt878 #0 [sw]"
find by pci: checking "bt878 #0 [sw]"

But no file in /dev/dvb/* is always a device. For example I tried cat 
frontend0. I also tried dvbstream -c (0/1/2/3) but it always complains about 
DVR_DEVICE not being a device. 

Help, What am I doing wrong?

Thanks in advance. 

Till