[linux-dvb] Skystar delivere unsynced TS Data

[a.share@t-online.de (Andreas Share)]

Hi,

additional to my problems with limited runtime on my both skystar2 rev 2.6c
i have seen the skystar deliver many unscyced TS packets to the demux.

Example:

Jul 12 23:52:02 vdr vdr[11048]: probing /dev/dvb/adapter2/frontend0
Jul 12 23:52:02 vdr vdr[11640]: tuner on device 3 thread started (pid=11640,
tid=81926)
Jul 12 23:52:03 vdr vdr[11641]: Section handler thread started (pid=11641,
tid=98311)
Jul 12 23:52:03 vdr vdr[11048]: probing /dev/dvb/adapter3/frontend0
Jul 12 23:52:03 vdr vdr[11048]: found 3 video devices
[...]
Jul 12 23:52:32 vdr vdr[11654]: receiver on device 3 thread started
(pid=11654, tid=294925)
Jul 12 23:52:32 vdr kernel: DVB Demux lost sync with TS
Jul 12 23:52:33 vdr last message repeated 485 times
Jul 12 23:52:33 vdr kernel: st sync with TS
Jul 12 23:52:33 vdr kernel: DVB Demux lost sync with TS
Jul 12 23:52:33 vdr last message repeated 527 times
[and so on...]
Jul 12 23:52:37 vdr vdr[11654]: receiver on device 3 thread ended
(pid=11654, tid=294925)
Jul 12 23:52:37 vdr kernel: DVB Demux lost sync with TS
Jul 12 23:52:37 vdr vdr[11048]: cTS2PES got 4 TS errors, 0 TS continuity
errors
Jul 12 23:52:37 vdr vdr[11048]: buffer stats: 119192 (11%) used
Jul 12 23:52:38 vdr kernel: DVB Demux lost sync with TS
Jul 12 23:52:58 vdr last message repeated 1233 times
[...]

Card works in transfer mode, and also in epg-scan (for a limited time).

A little bit later:
Jul 13 00:10:19 vdr last message repeated 527 times
Jul 13 00:10:20 vdr kernel: st sync with TS
Jul 13 00:10:20 vdr kernel: DVB Demux lost sync with TS
Jul 13 00:10:20 vdr last message repeated 527 times
Jul 13 00:10:20 vdr kernel: st sync with TS
Jul 13 00:10:20 vdr kernel: DVB Demux lost sync with TS
Jul 13 00:10:41 vdr last message repeated 17377 times
Jul 13 00:15:09 vdr vdr[11638]: channel 6 (RTL2) event 00:15 'Ungeklärte
Morde - Dem Täter auf der Spur' status 4
Jul 13 00:20:09 vdr vdr[11638]: channel 7 (S RTL,Super RTL) event 00:20
'Infomercials' status 4

no more sync errors, but the card works...
This morning the same...card has many sync errors, after an hour the errors
gone, the card still work without any errors for an additional hour and then
the ss2 "dies"....no more data, no more irq´s.

Some idea?

BTW: how could i get spec´s/docus for the flexcorp II chip?

Andreas