[linux-dvb] initial tuning failed

["Benjamin Adler" <BenAdler@gmx.net>]

Hi! 
 
I've been struggling with my dvb-c card (budget, SAA-7146AH, VES-1820, 
Tuner TDBE2-032A) and linux-2.6.7 for a while now and still couldn't get 
it to tune correctly. 
 
Since my last two emails to this list 
(http://www.linuxtv.org/mailinglists/linux-dvb/2004/07-2004/msg00043.html 
and 
http://www.linuxtv.org/mailinglists/linux-dvb/2004/07-2004/msg00081.html) 
went mostly unanswered, I'll try it one more time: 
 
dmesg says: 
	Linux video capture interface: v1.00 
	SAA5246A driver (SAA5246A interface) for VideoText version 1.6 
	SAA5249 driver (SAA5249 interface) for VideoText version 1.7 
	Colour QuickCam for Video4Linux v0.05 
	Zoran MJPEG board driver version 0.9.5 
	No known MJPEG cards found. 
	Linux video codec intermediate layer: v0.2 
	stradis0: SDM2xx found 
	videodev: "SAA7146A" has no release callback. Please fix your 
driver for proper sysfs support, see http://lwn.net/Articles/36850/ 
	stradis: 1 card(s) found. 
	stradis0: config = 10 04 13 c2 26 0f ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff ff ff ff ff ff ff 
	saa7130/34: v4l2 driver version 0.2.11 loaded 
	cx2388x v4l2 driver version 0.0.3 loaded 
	saa7146: register extension 'Multimedia eXtension Board'. 
	saa7146: register extension 'hexium HV-PCI6/Orion'. 
	saa7146: register extension 'hexium gemini'. 
	saa7146: register extension 'dpc7146 demonstration board'. 
	saa7146: register extension 'budget dvb'. 
	saa7146: found saa7146 @ mem e0917000 (revision 1, irq 18) 
(0x13c2,0x1004). 
	DVB: registering new adapter (TT-Budget/WinTV-NOVA-C  PCI). 
	DVB: VES1820(0): setup for tuner sp5659c 
	DVB: VES1820(0): pwm=0x48 
	DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)... 
	TT-Budget/WinTV-NOVA-C  PCI adapter 0 has MAC addr = 
00:d0:5c:02:15:c3 
 
 
./scan -5 dvb-c/de-wtnet 
	scanning dvb-c/de-wtnet 
	using '/dev/dvb/adapter0/frontend0' and 
'/dev/dvb/adapter0/demux0' 
	initial transponder 450000000 6875000 0 3 
	>>> tune to: 450000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64 
	WARNING: >>> tuning failed!!! 
	>>> tune to: 450000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64 
(tuning failed) 
	WARNING: >>> tuning failed!!! 
	ERROR: initial tuning failed 
	dumping lists (0 services) 
	Done. 
 
./scan -5 -i 0 dvb-c/de-wtnet gives the same result, just with 
INVERSION_OFF in the output. 
 
What could I try to get some more meaningful debug messages? Could you 
please give me some clues? 
 
thanks you! 
Benjamin Adler 
 

-- 
NEU: WLAN-Router für 0,- EUR* - auch für DSL-Wechsler!
GMX DSL = supergünstig & kabellos http://www.gmx.net/de/go/dsl