[linux-dvb] Re: List of Frontends/PLLs used by DVB devices

[Andrew de Quincey <adq_dvb@lidskialf.net>]

On Sunday 19 Sep 2004 01:51, Oliver Endriss wrote:
> On Sonntag, 19. September 2004 02:19, Andrew de Quincey wrote:
> > Thanks a lot! another few off the list.
> >
> > > card description: Siemens/Technotrend/Hauppauge PCI rev1.3
> > > card driver: dvb-ttpci
> > > frontend driver: ves1x93
> > > frontend location: tin box
> > > tin box: ALPS BSRV2-301A
> > > interface: PCI
> > > PCI device id: 1131:7146
> > > PCI subsystem id: 0x13c2:0x0000
> > >
> > > > Technotrend/Hauppauge PCI rev?(unknown0)?             -- 0x13c2,
> > > > 0x1002
> > >
> > > card description: Siemens/Technotrend/Hauppauge PCI rev1.3
> > > card driver: dvb-ttpci
> > > frontend driver: ves1x93
> > > frontend location: tin box
> > > tin box: ALPS BSRV2-301A
> > > interface: PCI
> > > PCI device id: 1131:7146
> > > PCI subsystem id: 0x13c2:0x1002
> >
> > Is the EEPROM occasionally bad? You've given two definitions for the 1.3
> > cards with different subsystem Ids... and also Peter Siering gave the
> > 13c2:0000 one as matching his rev 1.5 card!
>
> I have *two* Rev 1.3 cards with id 0x13c2:0x0000. So the id is correct.
>
> I know from several postings at vdr-portal that Rev 1.5 cards are
> currently (mis)identified by the driver as rev 1.3 cards.
> Imho they use the same id as rev 1.3 cards, but have a different
> frontend. :(

Hi - you misunderstood slightly - I agree that the rev1.3 is 0x13c2:0x0000. 
The question I was asking was about the rev1.3 you've put as subsystem ID 
0x13c2:0x1002 above... I would have expected that card to be in the revision 
2.x range. I'm assuming all DVB-S fullfeatured rev1.x cards were 
0x13c2:0x0000 - so far everything has matched this except the one above. Can 
you confirm so I know if I'm right or wrong in that assumption?