[linux-dvb] Twinhan VisionPlus DVB-T

["Terry Lewis" <terry@kryogenic.co.uk>]

Hi all,
I have recently acquired a VisionPlus DVB-T card, and after finally
figuring out that i was using the wrong transmitter info I managed to get
it to tune in Linux. Problem I have is that the picture seems to break up
alot. I have used the card in a win98 box to ensure I get a good enough
signal and it seems to work fine, considering its only a p3 550 and a TNT2
card, the playback is pretty smooth.

I have tried changing dst_type_flags to 2 but it becomes even worse,
although these symptons are similar to the comment regarding that use of
that flag in the docs.

I'm running SuSE 9.1, my kernel is 2.6.5-7.108 (SUSE's latest).
I have no idea if SUSE has carried over anything new from later kernels
other than security fixes, and major bug fixes. I do wonder if there have
been any improvements made in this area with the dvb drivers in the latest
kernel?

here's some output from dvbtune -f 578000000 -m if it helps any:

Signal=15360, Verror=0, SNR=25088dB, BlockErrors=0, (S|L|C|V|SY|)
Signal=15104, Verror=0, SNR=25088dB, BlockErrors=0, (S|L|C|V|SY|)
Signal=15360, Verror=0, SNR=25088dB, BlockErrors=0, (S|L|C|V|SY|)
Signal=15104, Verror=0, SNR=25088dB, BlockErrors=0, (S|L|C|V|SY|)
Signal=15104, Verror=0, SNR=25088dB, BlockErrors=0, (S|L|C|V|SY|)
Signal=15104, Verror=0, SNR=25088dB, BlockErrors=0, (S|L|C|V|SY|)
Signal=15360, Verror=0, SNR=25088dB, BlockErrors=0, (S|L|C|V|SY|)
Signal=15104, Verror=0, SNR=25088dB, BlockErrors=0, (S|L|C|V|SY|)
Signal=15104, Verror=0, SNR=25088dB, BlockErrors=0, (S|L|C|V|SY|)
Signal=15104, Verror=0, SNR=25088dB, BlockErrors=0, (S|L|C|V|SY|)
Signal=15104, Verror=0, SNR=24576dB, BlockErrors=0, (S|L|C|V|SY|)
Signal=15104, Verror=0, SNR=25088dB, BlockErrors=0, (S|L|C|V|SY|)
Signal=15104, Verror=0, SNR=24064dB, BlockErrors=0, (S|L|C|V|SY|)


Regards,
Terry Lewis