Alle 18:39, luned́ 26 luglio 2004, hai scritto: > Folks, > Holger's remarks are right! > Here is the status of my efforts: > 1) I implemented a new tuner type in stv0299.c. Since the new box ver 2.2 > has a ALPS BSBE1 tuner. This tuner model has only two small differences to > the BSRU tuner. However I will need Holgers's help to distinguesh between > the old and the new USB box. (should be easy though). This works with all > versions of the driver. 1.1.1, 2.4 or 2.6. > > > 2) Further, I compiled the new firmware from the windows file to have the > lastest firmware downloaded on the USB box. The impact of this is for me > unkown since I did not test the original firmware of the older devices. > > > 3) the diseq stuff in the new hardware is broken with the old driver. > > > In dvb-ttusb-budget.c the call "ttusb_update_lnb" ist not switching between > 13 and 18 Volt, I only see 18 volt. This pre! vents the tuning to the > horizontal channels. > > > However the function still switches the voltage on even on the new > hardware. > > I askes TT to give me a hint, even via Axel Hundt, but no response yet. > Since I cannot disassemble windows code I am a little lost here. This is > the last issue! > > All the above stuff 1) + 2) I can send you over. > > Stefan Hello Stefan, where found this pach for my NOVA-S USB (ALPS BSBE1 tuner) I have search in cvs but do not found!! Tank's Alessandro -- <<<<<<<<<<<<<Mods>>>>>>>>>>>>> SlackWare 9.1 on Laptop DELL Inspiron 4100 <<<<<<<<<<===========>>>>>>>>>>
Attachment:
pgp00003.pgp
Description: PGP signature