[linux-dvb] Re: 2.6.10-rc2 + dvb-kernel problem

[Joerg Riechardt <J.Riechardt@gmx.de>]

Johannes Stezenbach wrote:

> Joerg Riechardt wrote:
>
> > cvs from few minutes ago, kernel 2.6.10-rc2
> > Inserting DVB modules into kernel
> > insmod: error inserting './skystar2.ko': -1 Unknown symbol in module
> > how to solve that?
> use dmesg to see which symbol
> probably a frontend module is missing
right, my frontend is mt312 and I only loaded that. When I load also 
mt352 and stv0299 (that are the ones dmesg complains about), insmod load 
works, but now I get

vdr kernel: PCI: Found IRQ 5 for device 0000:02:0b.0
vdr kernel: PCI: Sharing IRQ 5 with 0000:00:1f.4
vdr kernel: /z/dvb-kernel/build-2.6/skystar2.c: FlexCopII(rev.130) chip
vdr kernel: /z/dvb-kernel/build-2.6/skystar2.c: the chip has 6 hardware 
filters
vdr kernel: driver_initialize MAC address = ff:ff:ff:ff:ff:ff:00:00
vdr kernel: DVB: registering new adapter (SkyStar2).
vdr kernel: master_xfer: write error 0 !
vdr kernel: message 0: flags=0x0, addr=0x68, buf[0]=0x2, len=2
vdr kernel: master_xfer: read error !
vdr kernel: message 0: flags=0x0, addr=0x68, buf=0x0, len=1
vdr kernel: message 1: flags=0x1, addr=0x68, buf=0x0, len=1
vdr kernel: master_xfer: read error !
vdr kernel: message 0: flags=0x0, addr=0xf, buf=0x7f, len=1
vdr kernel: message 1: flags=0x1, addr=0xf, buf=0x0, len=1
vdr kernel: mt352_read_register: readreg error (ret == -121)
vdr kernel: skystar2: A frontend driver was not found for device 
13d0/2103 subsystem 13d0/2103
vdr kernel: PCI: Found IRQ 12 for device 0000:02:0e.0
vdr kernel: /z/dvb-kernel/build-2.6/skystar2.c: FlexCopII(rev.130) chip 
found
vdr kernel: /z/dvb-kernel/build-2.6/skystar2.c: the chip has 6 hardware 
filters
vdr kernel: DVB: registering new adapter (SkyStar2).
vdr kernel: master_xfer: write error 0 !
vdr kernel: message 0: flags=0x0, addr=0x68, buf[0]=0x2, len=2
vdr kernel: master_xfer: read error !
vdr kernel: message 0: flags=0x0, addr=0x68, buf=0x0, len=1
vdr kernel: message 1: flags=0x1, addr=0x68, buf=0x0, len=1
vdr kernel: master_xfer: read error !
vdr kernel: message 0: flags=0x0, addr=0xf, buf=0x7f, len=1
vdr kernel: message 1: flags=0x1, addr=0xf, buf=0x0, len=1
vdr kernel: mt352_read_register: readreg error (ret == -121)
vdr kernel: skystar2: A frontend driver was not found for device 
13d0/2103 subsystem 13d0/2103

what can I do?

Jörg