From linux-dvb-bounce@linuxtv.org Tue Feb 12 17:33:58 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 29067 invoked by uid 0); 12 Feb 2002 17:33:58 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 12 Feb 2002 17:33:58 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16agoD-0004jP-00; Tue, 12 Feb 2002 18:33:37 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 12 Feb 2002 18:32:37 +0100 (CET) Received: from dial-213-168-73-75.netcologne.de ([213.168.73.75] helo=rjkm.de) by chambertin.convergence.de with TLSv1:DES-CBC3-SHA:168 encrypted esmtp (Exim 3.33 #2 ) id 16agnD-0004XI-00 for ; Tue, 12 Feb 2002 18:32:36 +0100 Received: (from rjkm@localhost) by rjkm.de (8.12.0.Beta19/8.12.0.Beta19) id g1CHoGoj003300; Tue, 12 Feb 2002 18:50:17 +0100 From: Ralph Metzler Message-ID: <15465.21976.504813.389719@draal.metzler> Date: Tue, 12 Feb 2002 18:50:16 +0100 To: peter.hettkamp@t-online.de (Peter Hettkamp) Cc: linux-dvb@linuxtv.org Subject: [linux-dvb] Pinnacle PCTV Sat In-Reply-To: <20020212180546.A31065@t-online.de> References: <20020212180546.A31065@t-online.de> X-Mailer: VM 6.95 under 21.4 (patch 4) "Artificial Intelligence" XEmacs Lucid Mime-Version: 1.0 (generated by tm-edit 1.8) Content-Type: text/plain; charset=US-ASCII X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: rjkm@convergence.de Precedence: bulk X-list: linux-dvb Peter Hettkamp writes: > I was wondering if there is still somebody out there interested in a driver > for above mentioned card? > Fact is, I have put some software together which allows me to write a > PES stream from this card to disk, or view it e.g. with mplayer. I would > like to create a real driver offering the Linux DVB API as far as the > hardware allows it, but I fear I will need some help here as I am not an > experienced driver hacker (yet). > If this is a concern: I used only publicly available documentation to > create my current software. Although Conexant does not carry the chip > data sheets on their own home page, they can be found in the internet. Where did you find them? I found datasheets for the 24108/24110 but not for the HM1811/1211. > The Pinnacle box states that the card uses chips named HM1811, HM1211 > and CN878. On my card, at least, the tuner chip is labelled 24108. The > label on the demodulator cannot be read because a cooler is glued on. > > So, is anybody interested in having a driver, or in helping me creating one, > or in having me help to create one? Sure, we can just put it into its own directory in the new DVB driver framework (DVB NEWSTRUCT branch), e.g. DVB/driver/pctv (or conexant, hm1xxx, whatever ?). AFAIK the Pinnacle PCTV should deliver the complete TS? All you have to do then to support the complete API including filters and networking is to register with the other dvb modules (dvbdev, dvb_demux) and feed the TS to them like the Nova card part of the Siemens driver does. The frontend driver should go into DVB/driver/frontends. Ralph -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Tue Feb 12 23:39:05 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 17653 invoked by uid 0); 12 Feb 2002 23:39:05 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 12 Feb 2002 23:39:05 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16amVW-0000Zw-00; Wed, 13 Feb 2002 00:38:42 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 13 Feb 2002 00:36:44 +0100 (CET) Received: from tmhoyle.gotadsl.co.uk ([195.149.46.162] helo=mail.cvsnt.org) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16amTc-0000Jp-00 for ; Wed, 13 Feb 2002 00:36:44 +0100 Received: from localhost (localhost [127.0.0.1]) by mail.cvsnt.org (Postfix) with ESMTP id 0BF96286D74; Tue, 12 Feb 2002 23:36:42 +0000 (GMT) Mailbox-Line: From tmh@nothing-on.tv Tue Feb 12 23:36:42 2002 Received: from nothing-on.tv (spock.my.home [192.168.2.3]) by mail.cvsnt.org (Postfix) with ESMTP id 3FDB5286D76; Tue, 12 Feb 2002 23:36:36 +0000 (GMT) Message-ID: <3C69A71B.9030705@nothing-on.tv> Date: Tue, 12 Feb 2002 23:36:59 +0000 From: Tony Hoyle User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:0.9.7) Gecko/20020121 MIME-Version: 1.0 To: fruit Cc: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: Hauppauge dvb-t status? References: <3C61C768.3070108@nothing-on.tv> <4b053d5b31fruit@ukgateway.net> <3C62F413.1050804@nothing-on.tv> <4b061a12c2fruit@ukgateway.net> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit X-Spam-Status: No, hits=-99.9 required=5.0 tests=SUBJ_ENDS_IN_Q_MARK,A_FROM_IN_AUTO_WLIST version=2.1 X-Virus-Scanned: by AMaViS perl-11 X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: tmh@nothing-on.tv Precedence: bulk X-list: linux-dvb fruit wrote: > Possibly. I've just tried the card in a K6-2 box - exactly the same > results :-\ > > Can't get any signal from Crystal Palace, so no joy there. I got it working at last... The first thing to remember is to modify the driver for the UK - it probably should have a lookup table and a 'country' parameter, but I'll leave that up the developers... Line 2669 - 2675 of dvb.c For the UK: para.u.ofdm.bandWidth=BANDWIDTH_8_MHZ; para.u.ofdm.HP_CodeRate=FEC_2_3; para.u.ofdm.LP_CodeRate=FEC_1_2; para.u.ofdm.Constellation=QAM_64; para.u.ofdm.TransmissionMode=TRANSMISSION_MODE_2K; para.u.ofdm.guardInterval=GUARD_INTERVAL_1_32; para.u.ofdm.HierarchyInformation=HIERARCHY_NONE; Now down to the bug. I'm surprised it worked for anybody, actually, I guess they got lucky. Basically, the driver defines a FrontendParameters structure in dvb.c line 2553 and doesn't initialise it properly. It's then passed via a FE_SET_FRONTEND call into apply_frontend_param which promptly rejects it with EINVAL... the reason you can't tune is that the hardware hasn't actually been initialised yet. The fix is to change dvb.c line 2553 to: FrontendParameters para={0}; Which zeros it out (which seems to be OK for default values). With this fix it works perfectly. Tony -- "Wipe Info uses hexadecimal values to wipe files. This provides more security than wiping with decimal values." -- Norton SystemWorks 2002 Manual tmh@nothing-on.tv http://www.nothing-on.tv -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 13 12:12:39 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 2348 invoked by uid 0); 13 Feb 2002 12:12:39 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 13 Feb 2002 12:12:39 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16ayGm-0007Tq-00; Wed, 13 Feb 2002 13:12:16 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 13 Feb 2002 13:07:07 +0100 (CET) Received: from [151.99.250.40] (helo=mail5.interbusiness.it) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16ayBn-0006pG-00 for ; Wed, 13 Feb 2002 13:07:07 +0100 Received: from matto ([217.57.220.18]) by mail5.interbusiness.it (8.9.3/8.9.3) with SMTP id NAA25333 for ; Wed, 13 Feb 2002 13:06:35 +0100 (MET) Message-ID: <001f01c1b487$0bbced00$0a00a8c0@davetech.it> From: "pfon" To: Subject: [linux-dvb] Newbe (SW developing) Date: Wed, 13 Feb 2002 13:07:44 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2615.200 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: p.oloap@libero.it Precedence: bulk X-list: linux-dvb Hi! I'm looking on the SW ( siemens_dvb 0.9.4 )driver of DVB-S PCI card and trying to understand anything. My interest is focalysed in particular on the Common Interface (CI)module and its SW driver. 1) I don't understand ( from the SW point of view) if the CI is menaged by the computer CPU or by the Texas chip present on the DVB board. 2) is there a SW explanation for develop beginner like me. ;-) thanks for your attention bye P -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 13 13:58:07 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 5243 invoked by uid 0); 13 Feb 2002 13:58:07 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 13 Feb 2002 13:58:07 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16azuk-0008UF-00; Wed, 13 Feb 2002 14:57:38 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 13 Feb 2002 14:55:06 +0100 (CET) Received: from ulima.unil.ch ([130.223.144.143]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16azsI-00083a-00 for ; Wed, 13 Feb 2002 14:55:06 +0100 Received: by ulima.unil.ch (Postfix, from userid 500) id 6B2C45B5CE; Wed, 13 Feb 2002 14:55:05 +0100 (CET) Date: Wed, 13 Feb 2002 14:55:05 +0100 From: Gregoire Favre To: linux-dvb@linuxtv.org Subject: [linux-dvb] teletext choice with alevt ? Message-ID: <20020213135505.GA22854@ulima.unil.ch> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit User-Agent: Mutt/1.3.27i X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: greg@ulima.unil.ch Precedence: bulk X-list: linux-dvb Hello, as I have removed my TV card, I want know to use teletext with DVB... I have tried the alevt patch from http://www.baycom.org/~tom/alevt-dvb.patch I can use teletext perfectly with the first programm of the transponder (SF1) but I don't manage going to the other ones: ./usr/X11R6/bin/alevt -vbi /dev/ost/dvr0 -pid 0023 alevt: SDT: service_id 0x9e53 not in PAT Service ID 0x0385 Type 0x01 Provider Name "SRG SSR idee suisse" Name "SF1" PMT PID 0x0190 TXT: PID 0x0020 lang deu type 0x01 magazine 1 page 0 Service ID 0x038b Type 0x01 Provider Name "SRG SSR idee suisse" Name "SF2" PMT PID 0x0193 TXT: PID 0x0029 lang deu type 0x01 magazine 1 page 0 Service ID 0x038f Type 0x01 Provider Name "SRG SSR idee suisse" Name "Sfi" PMT PID 0x0197 TXT: PID 0x0035 lang deu type 0x01 magazine 1 page 0 Service ID 0x0386 Type 0x01 Provider Name "SRG SSR idee suisse" Name "TSR1" PMT PID 0x0191 TXT: PID 0x0023 lang fra type 0x01 magazine 1 page 0 Service ID 0x038c Type 0x01 Provider Name "SRG SSR idee suisse" Name "TSR2" PMT PID 0x0194 TXT: PID 0x002c lang fra type 0x01 magazine 1 page 0 Service ID 0x03b7 Type 0x02 Provider Name "Schweizer Radio International" Name "SRI-F-I" PMT PID 0x01ab TXT: PID 0x1fff lang type 0x00 magazine 0 page 0 Service ID 0x03b9 Type 0x02 Provider Name "Radio della Svizzera Italiana" Name "RSI Rete Uno" PMT PID 0x01ac TXT: PID 0x1fff lang type 0x00 magazine 0 page 0 Service ID 0x03ba Type 0x02 Provider Name "Schweizer Radio International" Name "SRI-INTER-CONTINENTAL" PMT PID 0x01ad TXT: PID 0x1fff lang type 0x00 magazine 0 page 0 Service ID 0x0387 Type 0x01 Provider Name "SRG SSR idee suisse" Name "TSI1" PMT PID 0x0192 TXT: PID 0x0026 lang ita type 0x01 magazine 1 page 0 Service ID 0x038d Type 0x01 Provider Name "SRG SSR idee suisse" Name "TSI2" PMT PID 0x0196 TXT: PID 0x0032 lang ita type 0x01 magazine 1 page 0 Service ID 0x03bd Type 0x02 Provider Name "Radio Suisse Romande" Name "OPTION MUSIQUE" PMT PID 0x01b0 TXT: PID 0x1fff lang type 0x00 magazine 0 page 0 Service ID 0x03be Type 0x02 Provider Name "Radio Suisse Romande" Name "ESPACE2" PMT PID 0x01b1 TXT: PID 0x1fff lang type 0x00 magazine 0 page 0 Service ID 0x038e Type 0x01 Provider Name "SRG SSR idee suisse" Name "SRG SSR SAT Access" PMT PID 0x0195 TXT: PID 0x1fff lang type 0x00 magazine 0 page 0 Using: Service ID 0x0385 Type 0x01 Provider Name "SRG SSR idee suisse" Name "SF1" PMT PID 0x0190 TXT: PID 0x0020 lang deu type 0x01 magazine 1 page 0 And it goes to SF1 TXT... ./usr/X11R6/bin/alevt -vbi /dev/ost/dvr0 -pid "0x0023" Using command line specified teletext PID 0x23 Don't enable to browse at all... Any idea how I could use this great software? The really best would be if I could open 3 alevt simultaneously (SF1,TSR1 and TSR2) and have all the pages simultaneously cached to allow a really fast reading ;-) Thanks you very much, Grégoire ________________________________________________________________ http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 13 14:28:10 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 15172 invoked by uid 0); 13 Feb 2002 14:28:10 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 13 Feb 2002 14:28:10 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16b0Nv-00036b-00; Wed, 13 Feb 2002 15:27:47 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 13 Feb 2002 15:25:38 +0100 (CET) Received: from tcx.kappa.ro ([194.102.251.20] helo=tcx.ro ident=root) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16b0Lq-0002ZJ-00 for ; Wed, 13 Feb 2002 15:25:38 +0100 Received: from localhost (seba@localhost [127.0.0.1]) by tcx.ro (8.9.3/8.9.3) with ESMTP id QAA31179 for ; Wed, 13 Feb 2002 16:34:42 +0200 Date: Wed, 13 Feb 2002 16:34:41 +0200 (EET) From: Sebastian Taralunga To: Subject: [linux-dvb] versions In-Reply-To: <15465.13705.30353.176353@draal.metzler> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: seba@tcx.ro Precedence: bulk X-list: linux-dvb I have managed to compile linux kernel version 2.2.20 together with driver siemens-0.8.2 and dvbd3. Everything works as expected so far and I can see data coming. The question is: if I want to use kernel 2.4.17, what driver version should I use? What dvdb version will it work then? Regards, Sebastian -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 13 15:37:16 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 7247 invoked by uid 0); 13 Feb 2002 15:37:16 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 13 Feb 2002 15:37:16 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16b1Sn-0001fC-00; Wed, 13 Feb 2002 16:36:53 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 13 Feb 2002 16:32:30 +0100 (CET) Received: from [149.239.160.13] (helo=ppd00013.deutschepost.de) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16b1OY-0001Kk-00 for ; Wed, 13 Feb 2002 16:32:30 +0100 Received: from ddaap078.deutschepost.de (ddaap078.deutschepost.de [160.58.1.78]) by ppd00013.deutschepost.de (8.12.1/8.12.1) with ESMTP id g1DFVxGd016658 for ; Wed, 13 Feb 2002 16:31:59 +0100 (MET) Received: from ddaah014.DeutschePost.de (unverified) by ddaap078.deutschepost.de (Content Technologies SMTPRS 4.2.5) with ESMTP id for ; Wed, 13 Feb 2002 15:46:40 +0100 Received: by DDAAH014.DeutschePost.de with Internet Mail Service (5.5.2653.19) id <1NMJY9Y8>; Wed, 13 Feb 2002 15:46:40 +0100 Message-ID: <019E7FD6783AD1119BA0400000363304FCC919@MNPAH004.DeutschePost.de> From: "Rienecker, Fa. Evenio, ITS P, M" To: linux-dvb@linuxtv.org Subject: [linux-dvb] Siemens DVB-C pin assignement of 26 pin connector Date: Wed, 13 Feb 2002 15:46:21 +0100 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: text/plain; charset="iso-8859-1" X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: C.Rienecker@deutschepost.de Precedence: bulk X-list: linux-dvb Hello to everyone who mey be interested here it comes: The pin assignments of the 26-pin connector on the SIEMENS DVB PCI-CABLE TV-CARD (may ascii-art help me): (If you have difficulties to see anything try Courier New or equiv.) Here is your SIEMENS DVB PCI-CABLE TV-CARD: --- __________________________________________________________________ | | | | | | | | | 1.. | | :: | | :: | | :. | | :: | | :: | | :: | | 26 | | | |__________________________________________________________________| | |______________||_____| | We have this lovely 26 pin connector with pin 12 missing (actually the numbering is arbitrary and may not be identical to whatever might be on the PCB itself) The pin are as following: SCART 8 1 2 GND digital audio 3 4 TV audio R out Y/C out 4 5 6 TV audio L out GND 7 8 GND Y/C out 3 9 10 video out GND 11 N/C SCART 16 13 14 SCART 7 GND 15 16 GND SCART 20 17 18 SCART 15 GND 19 20 GND SCART 11 21 22 Y/C in 3 GND 23 24 GND Y/C in 4 25 26 video in Now, the SCART ist a male connector numbered like this: ------------------------------- / 19 17 15 13 11 9 7 5 3 1 | / 20 18 16 14 12 10 8 6 4 2 | --------------------------------- The Y/C are female mini-DIN connectors and look like this: ______ / 4 3 \ / \ |2 __ 1| \ |__| / \______/ The wires on the 26-pin connector are color coded. For whom it may concern: brown 1 & 14 blue 3 & 17 red 4 & 18 purple 5 & 22 grey 6 & 21 orange 9 & 25 yellow 10 & 26 black 13 and of course the GND pins (i.e. 2,7,8,11,15,16,19,20,23&24). happy soldering, Christian. > -----Original Message----- > From: Peter Bieringer [mailto:pb@bieringer.de] > Sent: Saturday, February 09, 2002 9:16 PM > To: linux-dvb@linuxtv.org > Subject: [linux-dvb] Need help: Siemens DVB-C pin assignement > of 26 pin > connector > > > Hello, > > first I'm new on this list and perhaps I have also an offtopic > question: > > I got a Siemens DVB-C board. > > Unfortunately, the connector is missing for the S-VHS, Audio, RGB, > Y/C connection to outside. > > Internally it's connected to a 26 (2x13, 1 blanked) pin connector. > I'm able to build one for myself, but I haven't found the pin > assignement. > > On the Internet I only found the description of the 10 (2x5) pin > connector of the DVB-S board. > > Has anyone a source where I can get such information or is able to do > a short view/measurement of its own adaptor and send this to me? > > Would be very great! > > Thank you very much, > > Peter > > > -- > Info: > To unsubscribe send a mail to listar@linuxtv.org with > "unsubscribe linux-dvb" as subject. > -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 13 15:52:28 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 12201 invoked by uid 0); 13 Feb 2002 15:52:27 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 13 Feb 2002 15:52:27 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16b1hO-0002qH-00; Wed, 13 Feb 2002 16:51:58 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 13 Feb 2002 16:50:16 +0100 (CET) Received: from [80.105.36.170] (helo=francesca.ufficio.alunetworks.com) by chambertin.convergence.de with smtp (Exim 3.33 #2 ) id 16b1fk-0002XR-00 for ; Wed, 13 Feb 2002 16:50:16 +0100 Received: (qmail 4244 invoked from network); 13 Feb 2002 15:58:18 -0000 Received: from aura.ufficio.alunetworks.com (HELO there) (192.168.0.107) by ufficio.alunetworks.com with SMTP; 13 Feb 2002 15:58:18 -0000 Content-Type: text/plain; charset="iso-8859-1" From: Denis Grilli Reply-To: denis@alunetworks.com To: linux-dvb@linuxtv.org Subject: [linux-dvb] driver for skystar2 Date: Wed, 13 Feb 2002 16:50:48 +0100 X-Mailer: KMail [version 1.3.2] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: denis@alunetworks.com Precedence: bulk X-list: linux-dvb There is driver for skystar2 (b2c2 chip based) card?? -- Denis Grilli denis@alunetworks.com http://www.alunetworks.com -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 13 21:15:55 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 21931 invoked by uid 0); 13 Feb 2002 21:15:55 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 13 Feb 2002 21:15:55 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16b6kQ-0000dS-00; Wed, 13 Feb 2002 22:15:26 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 13 Feb 2002 22:12:39 +0100 (CET) Received: from snowstorm.mail.pipex.net ([158.43.192.97]) by chambertin.convergence.de with smtp (Exim 3.33 #2 ) id 16b6hi-0000QI-00 for ; Wed, 13 Feb 2002 22:12:38 +0100 Received: (qmail 13951 invoked from network); 13 Feb 2002 21:12:37 -0000 Received: from useraa06.test-uk.uudial.com (HELO bandit.fruits.lan) (62.188.193.7) by smtp-6.dial.pipex.com with SMTP; 13 Feb 2002 21:12:37 -0000 Received: from rpc (rpc.fruits.lan [192.168.1.8]) by bandit.fruits.lan (8.11.6/8.11.6/SuSE Linux 0.5) with SMTP id g1DLBbJ07392 for ; Wed, 13 Feb 2002 21:11:37 GMT MIME-Version: 1.0 From: fruit To: linux-dvb@linuxtv.org Date: Wed, 13 Feb 2002 21:11:38 +0000 (GMT) Subject: [linux-dvb] Re: Hauppauge dvb-t status? Message-ID: <4b085537fcfruit@ukgateway.net> In-Reply-To: <3C69A71B.9030705@nothing-on.tv> References: <3C61C768.3070108@nothing-on.tv> <4b053d5b31fruit@ukgateway.net> <3C62F413.1050804@nothing-on.tv> <4b061a12c2fruit@ukgateway.net> <3C69A71B.9030705@nothing-on.tv> User-Agent: Pluto/2.03e (RISC-OS/4.02) POPstar/2.03 Content-Type: text/plain X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: fruit@ukgateway.net Precedence: bulk X-list: linux-dvb In article <3C69A71B.9030705@nothing-on.tv>, Tony Hoyle wrote: > fruit wrote: > > Possibly. I've just tried the card in a K6-2 box - exactly the same > > results :-\ > > > > Can't get any signal from Crystal Palace, so no joy there. > I got it working at last... Excellent, thanks. I'm getting results back from dvbtune with your mods.. just as I was about to give up and return to analogue. Andy -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 13 22:00:35 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 4229 invoked by uid 0); 13 Feb 2002 22:00:35 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 13 Feb 2002 22:00:35 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16b7Rc-0002sI-00; Wed, 13 Feb 2002 23:00:04 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 13 Feb 2002 22:58:10 +0100 (CET) Received: from tmhoyle.gotadsl.co.uk ([195.149.46.162] helo=mail.cvsnt.org) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16b7Pl-0002ZL-00 for ; Wed, 13 Feb 2002 22:58:09 +0100 Received: from localhost (localhost [127.0.0.1]) by mail.cvsnt.org (Postfix) with ESMTP id 64E7F286C2E; Wed, 13 Feb 2002 21:58:08 +0000 (GMT) Mailbox-Line: From tmh@nothing-on.tv Wed Feb 13 21:58:07 2002 Received: from nothing-on.tv (spock.my.home [192.168.2.3]) by mail.cvsnt.org (Postfix) with ESMTP id B8BAA286C17; Wed, 13 Feb 2002 21:58:05 +0000 (GMT) Message-ID: <3C6AE186.1050900@nothing-on.tv> Date: Wed, 13 Feb 2002 21:58:30 +0000 From: Tony Hoyle User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:0.9.7) Gecko/20020121 MIME-Version: 1.0 To: fruit Cc: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: Hauppauge dvb-t status? References: <3C61C768.3070108@nothing-on.tv> <4b053d5b31fruit@ukgateway.net> <3C62F413.1050804@nothing-on.tv> <4b061a12c2fruit@ukgateway.net> <3C69A71B.9030705@nothing-on.tv> <4b085537fcfruit@ukgateway.net> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit X-Spam-Status: No, hits=-99.2 required=5.0 tests=SUBJ_ENDS_IN_Q_MARK,LINE_OF_YELLING,A_FROM_IN_AUTO_WLIST version=2.1 X-Virus-Scanned: by AMaViS perl-11 X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: tmh@nothing-on.tv Precedence: bulk X-list: linux-dvb fruit wrote: > > I'm getting results back from dvbtune with your mods.. just as I was about > to give up and return to analogue. > Great... Now all I have to do is work out how to get video out of the thing. If anyone has made a .dvbrc for UK DVB-t it'd be nice to see it... my attempts have been a dismal failure: LNB ID 1 TYPE 2 SAT ID 1 NAME "UK-DVB" LNBID 0 FMIN 650000000 FMAX 778000000 TRANSPONDER ID 1 SATID 1 TYPE 2 FREQ 754166000 BANDWIDTH 0 GUARD_INTERVAL 2 HIERARCHY 0 HP_RATE 2 LP_RATE 6 MODULATION 1 TRANSMISSION_MODE 1 CHANNEL ID 1 TPID 600 NAME "BBC ONE" TYPE 0 VPID 601 APID 603 Is my best attempt so far, but tuxzap keeps reading the frequency as zero, so I don't think I've got the syntax right. Tony -- "Wipe Info uses hexadecimal values to wipe files. This provides more security than wiping with decimal values." -- Norton SystemWorks 2002 Manual tmh@nothing-on.tv http://www.nothing-on.tv -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Thu Feb 14 07:02:40 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 18098 invoked by uid 0); 14 Feb 2002 07:02:40 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 14 Feb 2002 07:02:40 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16bFuJ-0005xb-00; Thu, 14 Feb 2002 08:02:15 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Thu, 14 Feb 2002 07:59:28 +0100 (CET) Received: from isj153.roedu.net ([193.231.12.153] helo=mail.slobozia.roedu.net) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16bFrb-0004vB-00 for ; Thu, 14 Feb 2002 07:59:27 +0100 Received: from vvcatalin ([192.168.1.8]) by mail.slobozia.roedu.net (8.11.6/linuxconf) with SMTP id g1EA1GG16614 for ; Thu, 14 Feb 2002 12:01:16 +0200 Message-ID: <001301c1b578$a0f1f900$0801a8c0@slobozia.roedu.net> From: "Catalin Voiculet" To: Subject: [linux-dvb] dvb, linux, internet Date: Thu, 14 Feb 2002 08:57:04 -0800 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: catalinv@slobozia.roedu.net Precedence: bulk X-list: linux-dvb Hi, i have a SkyStar 1 DVB board and i want to use it for internet through a linux server. i have latest version of siemen drivers (0.9.3) and i also have 2.4.10 kernel. i compiled drivers, i made make insmod. everything is ok. but i cannot "get up" the interface dvb0, so that i can use. and more, how do i use dvbd? i'd like a step by step guide of getting up and work this solution for internet. thanks a lot... catalin v. -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Thu Feb 14 07:26:20 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 23253 invoked by uid 0); 14 Feb 2002 07:26:20 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 14 Feb 2002 07:26:20 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16bGH9-0006gX-00; Thu, 14 Feb 2002 08:25:51 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Thu, 14 Feb 2002 08:24:42 +0100 (CET) Received: from mail.bieringer.de ([195.226.187.51] helo=titan.bieringer.de) by chambertin.convergence.de with smtp (Exim 3.33 #2 ) id 16bGG1-0006Wz-00 for ; Thu, 14 Feb 2002 08:24:41 +0100 Received: (qmail 18906 invoked from network); 14 Feb 2002 07:24:40 -0000 Received: from pd950fbc9.dip.t-dialin.net (HELO ??) (217.80.251.201) by mail.bieringer.de with SMTP; 14 Feb 2002 07:24:40 -0000 Date: Thu, 14 Feb 2002 08:24:42 +0100 From: Peter Bieringer To: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: Siemens DVB-C pin assignement of 26 pin connector Message-ID: <16000000.1013671482@localhost> In-Reply-To: <019E7FD6783AD1119BA0400000363304FCC919@MNPAH004.DeutschePost.de> References: <019E7FD6783AD1119BA0400000363304FCC919@MNPAH004.DeutscheP ost.de> X-Mailer: Mulberry/2.2.0b2 (Linux/x86) X-Echelon: GRU NSA GCHQ CIA Pentagon nuclear war terror anthrax X-URL: http://www.bieringer.de/pb/ X-OS: Linux MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Content-Disposition: inline X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: pb@bieringer.de Precedence: bulk X-list: linux-dvb --On Wednesday, February 13, 2002 03:46:21 PM +0100 "Rienecker, Fa. Evenio, ITS P, M" wrote: > Hello to everyone who mey be interested > here it comes: The pin assignments of the 26-pin connector > on the SIEMENS DVB PCI-CABLE TV-CARD (may ascii-art help me): > happy soldering, Done, works, great! Thank you very much! Peter -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Thu Feb 14 09:47:46 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 6452 invoked by uid 0); 14 Feb 2002 09:47:46 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 14 Feb 2002 09:47:46 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16bIU4-0007x2-00; Thu, 14 Feb 2002 10:47:20 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Thu, 14 Feb 2002 10:46:09 +0100 (CET) Received: from [212.54.107.183] (helo=dingo.srr.ro) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16bISu-0007l1-00 for ; Thu, 14 Feb 2002 10:46:08 +0100 Received: from srr.ro by dingo.srr.ro (8.9.3/8.9.3) with ESMTP id LAA28913 for ; Thu, 14 Feb 2002 11:45:36 +0200 Message-ID: <3C6B8740.F5BEE6D@srr.ro> Date: Thu, 14 Feb 2002 11:45:36 +0200 From: Andrei Boros Organization: Societatea Romana de Radiodifuziune X-Mailer: Mozilla 4.75 [en] (Win95; U) X-Accept-Language: en MIME-Version: 1.0 To: linux-dvb@linuxtv.org Subject: [linux-dvb] EON TP115 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: andrei@srr.ro Precedence: bulk X-list: linux-dvb Apparently EON's TP115 is gone now, it no longer appeasr in the website login page. Note, the defaults built into dvbd3 tune to this transponder. -- ing. Andrei Boros mailto:andrei@srr.ro / +40-1-303-1870 Centrul pt. Tehnologia Informatiei Societatea Romana de Radiodifuziune -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Thu Feb 14 10:37:57 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 21402 invoked by uid 0); 14 Feb 2002 10:37:57 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 14 Feb 2002 10:37:57 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16bJGZ-0003fl-00; Thu, 14 Feb 2002 11:37:27 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Thu, 14 Feb 2002 11:36:39 +0100 (CET) Received: from clueless.redbus.aaisp.net ([217.169.20.20]) by chambertin.convergence.de with smtp (Exim 3.33 #2 ) id 16bJFn-0003V6-00 for ; Thu, 14 Feb 2002 11:36:39 +0100 Received: from simon([217.169.14.180]) by clueless.redbus.aaisp.net for linux-dvb@linuxtv.org; Thu, 14 Feb 2002 10:36:36 +0000 Reply-To: From: "Simon Dean" To: Subject: [linux-dvb] Re: Hauppauge dvb-t status? Date: Thu, 14 Feb 2002 10:36:33 -0000 Message-ID: <000001c1b543$79988700$b40ea9d9@simon> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.2627 Importance: Normal In-Reply-To: <3C6AE186.1050900@nothing-on.tv> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: linux-dvb@sickhack.com Precedence: bulk X-list: linux-dvb I've got the Nova-t working in the UK with the Siemens DVB driver. I used dvbstream to test it. I managed to get a semi-working MPEG2 file from the card to play in Windows with Windows Media Player. Check out http://www.linuxstb.org/dvbstream/ if you haven't already. Simon -----Original Message----- From: linux-dvb-bounce@linuxtv.org [mailto:linux-dvb-bounce@linuxtv.org] On Behalf Of Tony Hoyle Sent: 13 February 2002 21:59 To: fruit Cc: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: Hauppauge dvb-t status? fruit wrote: > > I'm getting results back from dvbtune with your mods.. just as I was about > to give up and return to analogue. > Great... Now all I have to do is work out how to get video out of the thing. If anyone has made a .dvbrc for UK DVB-t it'd be nice to see it... my attempts have been a dismal failure: LNB ID 1 TYPE 2 SAT ID 1 NAME "UK-DVB" LNBID 0 FMIN 650000000 FMAX 778000000 TRANSPONDER ID 1 SATID 1 TYPE 2 FREQ 754166000 BANDWIDTH 0 GUARD_INTERVAL 2 HIERARCHY 0 HP_RATE 2 LP_RATE 6 MODULATION 1 TRANSMISSION_MODE 1 CHANNEL ID 1 TPID 600 NAME "BBC ONE" TYPE 0 VPID 601 APID 603 Is my best attempt so far, but tuxzap keeps reading the frequency as zero, so I don't think I've got the syntax right. Tony -- "Wipe Info uses hexadecimal values to wipe files. This provides more security than wiping with decimal values." -- Norton SystemWorks 2002 Manual tmh@nothing-on.tv http://www.nothing-on.tv -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Thu Feb 14 15:32:48 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 21156 invoked by uid 0); 14 Feb 2002 15:32:47 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 14 Feb 2002 15:32:47 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16bNro-0008CN-00; Thu, 14 Feb 2002 16:32:12 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Thu, 14 Feb 2002 16:29:17 +0100 (CET) Received: from [212.200.80.243] (helo=mail.bozic.co.yu) by chambertin.convergence.de with smtp (Exim 3.33 #2 ) id 16bNoz-00075r-00 for ; Thu, 14 Feb 2002 16:29:17 +0100 Received: (qmail 15436 invoked from network); 14 Feb 2002 16:14:21 -0000 Received: from freestyler.bozic.co.yu (HELO Freestyler) (212.200.80.248) by mail.bozic.co.yu with SMTP; 14 Feb 2002 16:14:21 -0000 Content-Type: text/plain; charset="iso-8859-1" From: Radisa Jovicevic Reply-To: ras@bozic.co.yu Organization: D.O.O. "Bozic i sinovi" To: linux-dvb@linuxtv.org Subject: [linux-dvb] ftp://linux.org.by/pub/sky/siemens_dvb_network_activator-0.1.tgz Date: Thu, 14 Feb 2002 17:21:24 +0100 X-Mailer: KMail [version 1.2] MIME-Version: 1.0 Message-Id: <02021417212400.04995@Freestyler> Content-Transfer-Encoding: 8bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: ras@bozic.co.yu Precedence: bulk X-list: linux-dvb can somebody send me this file or give me new URL to ftp://linux.org.by/pub/sky/siemens_dvb_network_activator-0.1.tgz because link to it is broken? thanks -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Thu Feb 14 18:57:35 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 20214 invoked by uid 0); 14 Feb 2002 18:57:35 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 14 Feb 2002 18:57:35 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16bR49-00046b-00; Thu, 14 Feb 2002 19:57:09 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Thu, 14 Feb 2002 19:55:29 +0100 (CET) Received: from gw-nl5.philips.com ([212.153.235.99]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16bR2W-0003rj-00 for ; Thu, 14 Feb 2002 19:55:28 +0100 Received: from smtpscan-nl2.philips.com (localhost.philips.com [127.0.0.1]) by gw-nl5.philips.com with ESMTP id TAA25895 for ; Thu, 14 Feb 2002 19:55:27 +0100 (MET) (envelope-from stuart.butterfield@philips.com) From: stuart.butterfield@philips.com Received: from smtpscan-nl2.philips.com(130.139.36.22) by gw-nl5.philips.com via mwrap (4.0a) id xma025893; Thu, 14 Feb 02 19:55:27 +0100 Received: from smtprelay-nl1.philips.com (localhost [127.0.0.1]) by smtpscan-nl2.philips.com (8.9.3/8.8.5-1.2.2m-19990317) with ESMTP id TAA23416 for ; Thu, 14 Feb 2002 19:55:27 +0100 (MET) Received: from hbg001soh.diamond.philips.com (e1soh01.diamond.philips.com [130.143.165.212]) by smtprelay-nl1.philips.com (8.9.3/8.8.5-1.2.2m-19990317) with ESMTP id TAA00843 for ; Thu, 14 Feb 2002 19:55:26 +0100 (MET) To: Subject: [linux-dvb] Probs with recent CVS and DVB-T Date: Thu, 14 Feb 2002 18:48:19 +0000 Message-ID: X-MIMETrack: Serialize by Router on hbg001soh/H/SERVER/PHILIPS(Release 5.0.5 |September 22, 2000) at 14/02/2002 20:14:00 MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: stuart.butterfield@philips.com Precedence: bulk X-list: linux-dvb Hi all, I'm having problems when insmod'ing the DVB drivers when using recent CVS snapshots and my Technotrend DVB-T card. The previous version I was using was dated Jan 3rd 2002, and that still works just fine. However, the versions I've tried from the past two or three days all fail with: dvb.o: init_module: No such device A colleague has tried the same version with his Hauppage DVB-S card and it works fine. So, has something changed in the DVB-T support recently? I'd rather not try all versions from Jan 3rd to present and see when it breaks! Anyone else using a Technotrend card with the latest snapshots? Any hints would be appreciated. Stuart -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Feb 15 09:37:11 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 15206 invoked by uid 0); 15 Feb 2002 09:37:11 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 15 Feb 2002 09:37:11 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16ben1-0002Bo-00; Fri, 15 Feb 2002 10:36:23 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 15 Feb 2002 10:34:18 +0100 (CET) Received: from [10.1.1.69] (helo=rjkm.de ident=root) by chambertin.convergence.de with TLSv1:DES-CBC3-SHA:168 encrypted esmtp (Exim 3.33 #2 ) id 16bel0-0001lb-00 for ; Fri, 15 Feb 2002 10:34:18 +0100 Received: (from rjkm@localhost) by rjkm.de (8.12.0.Beta19/8.12.0.Beta19) id g1F9YQU0001742; Fri, 15 Feb 2002 10:34:26 +0100 From: Ralph Metzler Message-ID: <15468.54817.747809.940710@draal.metzler> Date: Fri, 15 Feb 2002 10:34:25 +0100 To: stuart.butterfield@philips.com Cc: Subject: [linux-dvb] Probs with recent CVS and DVB-T In-Reply-To: References: X-Mailer: VM 6.95 under 21.4 (patch 4) "Artificial Intelligence" XEmacs Lucid Mime-Version: 1.0 (generated by tm-edit 1.8) Content-Type: text/plain; charset=US-ASCII X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: rjkm@convergence.de Precedence: bulk X-list: linux-dvb stuart.butterfield@philips.com writes: > Hi all, > > I'm having problems when insmod'ing the DVB drivers when using recent > CVS snapshots and my Technotrend DVB-T card. The previous version I > was using was dated Jan 3rd 2002, and that still works just > fine. However, the versions I've tried from the past two or three days > all fail with: > > dvb.o: init_module: No such device > > A colleague has tried the same version with his Hauppage DVB-S card > and it works fine. > > So, has something changed in the DVB-T support recently? I'd rather > not try all versions from Jan 3rd to present and see when it breaks! > Anyone else using a Technotrend card with the latest snapshots? > > Any hints would be appreciated. What subvendor device id does your card report with lspci? I changed the handling of the different sub ids a little bit. Now unknown ids are completely rejected in get_card_type() in dvb.c (or av7110/av7110.c in the new tree). Ralph -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Feb 15 09:49:43 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 19844 invoked by uid 0); 15 Feb 2002 09:49:43 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 15 Feb 2002 09:49:43 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16bezJ-0003Gj-00; Fri, 15 Feb 2002 10:49:05 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 15 Feb 2002 10:48:31 +0100 (CET) Received: from gw-nl5.philips.com ([212.153.235.99]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16beyk-000373-00 for ; Fri, 15 Feb 2002 10:48:30 +0100 Received: from smtpscan-nl4.philips.com (localhost.philips.com [127.0.0.1]) by gw-nl5.philips.com with ESMTP id KAA16078 for ; Fri, 15 Feb 2002 10:48:28 +0100 (MET) (envelope-from stuart.butterfield@philips.com) From: stuart.butterfield@philips.com Received: from smtpscan-nl4.philips.com(130.139.36.24) by gw-nl5.philips.com via mwrap (4.0a) id xma016076; Fri, 15 Feb 02 10:48:29 +0100 Received: from smtprelay-nl1.philips.com (localhost [127.0.0.1]) by smtpscan-nl4.philips.com (8.9.3/8.8.5-1.2.2m-19990317) with ESMTP id KAA05721 for ; Fri, 15 Feb 2002 10:48:28 +0100 (MET) Received: from hbg001soh.diamond.philips.com (e1soh01.diamond.philips.com [130.143.165.212]) by smtprelay-nl1.philips.com (8.9.3/8.8.5-1.2.2m-19990317) with ESMTP id KAA03383 for ; Fri, 15 Feb 2002 10:48:27 +0100 (MET) To: Subject: [linux-dvb] Problems with list archive? Date: Fri, 15 Feb 2002 09:41:22 +0000 Message-ID: X-MIMETrack: Serialize by Router on hbg001soh/H/SERVER/PHILIPS(Release 5.0.5 |September 22, 2000) at 15/02/2002 11:07:02 MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: stuart.butterfield@philips.com Precedence: bulk X-list: linux-dvb Hi all, Is there a problem with the mailing list archive search at http://www.linuxtv.org/cgi-bin/htsearch I never seem to get any hits on pages more recent than Sept 2001. Stuart -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Feb 15 10:40:28 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 2347 invoked by uid 0); 15 Feb 2002 10:40:27 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 15 Feb 2002 10:40:27 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16bfmZ-00080p-00; Fri, 15 Feb 2002 11:39:59 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 15 Feb 2002 11:38:47 +0100 (CET) Received: from gw-nl4.philips.com ([212.153.190.6]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16bflO-0007nB-00 for ; Fri, 15 Feb 2002 11:38:46 +0100 Received: from smtpscan-nl2.philips.com (localhost.philips.com [127.0.0.1]) by gw-nl4.philips.com with ESMTP id LAA24336; Fri, 15 Feb 2002 11:37:53 +0100 (CET) (envelope-from stuart.butterfield@philips.com) From: stuart.butterfield@philips.com Received: from smtpscan-nl2.philips.com(130.139.36.22) by gw-nl4.philips.com via mwrap (4.0a) id xma024334; Fri, 15 Feb 02 11:37:53 +0100 Received: from smtprelay-nl1.philips.com (localhost [127.0.0.1]) by smtpscan-nl2.philips.com (8.9.3/8.8.5-1.2.2m-19990317) with ESMTP id LAA26243; Fri, 15 Feb 2002 11:38:43 +0100 (MET) Received: from hbg001soh.diamond.philips.com (e1soh01.diamond.philips.com [130.143.165.212]) by smtprelay-nl1.philips.com (8.9.3/8.8.5-1.2.2m-19990317) with ESMTP id LAA20030; Fri, 15 Feb 2002 11:38:41 +0100 (MET) To: Ralph Metzler Subject: [linux-dvb] Probs with recent CVS and DVB-T Cc: Date: Fri, 15 Feb 2002 10:31:08 +0000 Message-ID: X-MIMETrack: Serialize by Router on hbg001soh/H/SERVER/PHILIPS(Release 5.0.5 |September 22, 2000) at 15/02/2002 11:57:15 MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: stuart.butterfield@philips.com Precedence: bulk X-list: linux-dvb Yep, that's the problem. lspci reports: 00:0f.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) Subsystem: Technotrend Systemtechnik GmbH: Unknown device 0008 Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at ea009000 (32-bit, non-prefetchable) [size=512] Sure enough, adding 0x0008 to the case list of Technotrend sub dev ids in dvb.c:get_card_type() makes everything work again. Next chance I get to shutdown my machine I'll have a closer look at the card to see if I can find a revision number. Many thanks. Stuart PS One other quick question, what is the 'new tree' you mentioned? There's nothing in my Feb 14th av7110 directory. Ralph Metzler writes: > stuart.butterfield@philips.com writes: > > Hi all, > > > > I'm having problems when insmod'ing the DVB drivers when using recent > > CVS snapshots and my Technotrend DVB-T card. The previous version I > > was using was dated Jan 3rd 2002, and that still works just > > fine. However, the versions I've tried from the past two or three days > > all fail with: > > > > dvb.o: init_module: No such device > > > > A colleague has tried the same version with his Hauppage DVB-S card > > and it works fine. > > > > So, has something changed in the DVB-T support recently? I'd rather > > not try all versions from Jan 3rd to present and see when it breaks! > > Anyone else using a Technotrend card with the latest snapshots? > > > > Any hints would be appreciated. > > > What subvendor device id does your card report with lspci? > > I changed the handling of the different sub ids a little bit. > Now unknown ids are completely rejected in get_card_type() in > dvb.c (or av7110/av7110.c in the new tree). > > > Ralph > > > > > -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Feb 15 12:11:59 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 31672 invoked by uid 0); 15 Feb 2002 12:11:59 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 15 Feb 2002 12:11:59 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16bhCl-0007kS-00; Fri, 15 Feb 2002 13:11:07 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 15 Feb 2002 13:09:20 +0100 (CET) Received: from mout1.freenet.de ([194.97.50.132] ident=exim) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16bU8z-0007NP-00 for ; Thu, 14 Feb 2002 23:14:21 +0100 Received: from [194.97.50.136] (helo=mx3.freenet.de) by mout1.freenet.de with esmtp (Exim 3.33 #3) id 16bU8y-0003lr-00 for linux-dvb@linuxtv.org; Thu, 14 Feb 2002 23:14:20 +0100 Received: from pd9e3801e.dip0.t-ipconnect.de ([217.227.128.30] helo=bluebox.conspiracy.net) by mx3.freenet.de with asmtp (ID mayne@chefmail.de) (Exim 3.33 #3) id 16bU8y-0000pV-00 for linux-dvb@linuxtv.org; Thu, 14 Feb 2002 23:14:20 +0100 Received: from localhost (mayne@localhost) by bluebox.conspiracy.net (8.11.0/8.11.0) with ESMTP id g1EMDkN01593 for ; Thu, 14 Feb 2002 23:13:46 +0100 Date: Thu, 14 Feb 2002 23:13:46 +0100 (CET) From: "M.Kiesel" X-Sender: mayne@bluebox.conspiracy.net To: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: Probs with recent CVS and DVB In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-Approved-By: dirk@convergence.de X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: dirk@convergence.de Precedence: bulk X-list: linux-dvb On Thu, 14 Feb 2002 stuart.butterfield@philips.com wrote: > I'm having problems when insmod'ing the DVB drivers when using recent > CVS snapshots and my Technotrend DVB-T card. [...] > dvb.o: init_module: No such device Same here but with a different setup. My Galaxis DVB-s used to work fine with kernel 2.2.16 and drivers from May 2001. Just upgraded to kernel 2.4.17 and 0.9.4 drivers. "init_module: No such device". See setup info below. Any ideas? Regards M.Kiesel # lsmod (after failed make insmod) Module Size Used by Tainted: P dvb_frontend 3248 0 dvb_demux 12576 0 saa7146_v4l 14500 0 (unused) saa7146_core 13152 0 [saa7146_v4l] tuner 4164 1 stv0299 2656 0 (unused) tda8083 1792 0 (unused) SP8870 2432 0 (unused) L64781 3328 0 (unused) VES1820 3200 0 (unused) VES1893 3392 1 dmxdev 7140 0 dvb_filter 7072 0 videodev 4544 0 i2c-core 12704 0 [dvb_frontend saa7146_core tuner stv0299 tda8083 SP8870 L64781 VES1820 VES1893] dvb_net 2624 0 dvbdev 1568 0 ipt_LOG 3136 4 (autoclean) iptable_nat 18420 0 (autoclean) (unused) iptable_mangle 1696 0 (autoclean) (unused) iptable_filter 1728 0 (autoclean) (unused) 8139too 12160 1 # make insmod /usr/src/linux/scripts/pathdown.sh: TOPDIR: parameter null or not set ./makedev.napi make make[1]: Entering directory `/root/DVB/driver' DIR=`pwd`; (cd /usr/src/linux; make SUBDIRS=$DIR modules) make[2]: Entering directory `/usr/src/linux' make -C /root/DVB/driver CFLAGS="-D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=k6 -DMODULE -DMODVERSIONS -include /usr/src/linux/include/linux/modversions.h" MAKING_MODULES=1 modules make[3]: Entering directory `/root/DVB/driver' make[3]: Nothing to be done for `modules'. make[3]: Leaving directory `/root/DVB/driver' make[2]: Leaving directory `/usr/src/linux' make[1]: Leaving directory `/root/DVB/driver' ( \ insmod dvbdev.o; \ insmod dvb_net.o; \ insmod i2c-core; \ insmod videodev; \ insmod dvb_filter.o; \ insmod dmxdev.o; \ insmod VES1893.o; \ insmod VES1820.o; \ insmod L64781.o; \ insmod SP8870.o debug=1; \ insmod tda8083.o; \ insmod stv0299.o; \ insmod tuner.o; \ insmod saa7146_core.o mode=0; \ insmod saa7146_v4l.o; \ insmod dvb_demux.o; \ insmod dvb_frontend.o; \ insmod dvb.o init_chan=2 pids_off=0; \ ) Warning: loading dvbdev.o will taint the kernel: non-GPL license - LGPL Using /lib/modules/2.4.17/kernel/drivers/i2c/i2c-core.o Using /lib/modules/2.4.17/kernel/drivers/media/video/videodev.o Warning: loading tuner.o will taint the kernel: no license Warning: loading saa7146_core.o will taint the kernel: no license Warning: loading saa7146_v4l.o will taint the kernel: no license dvb.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters make: *** [insmod] Error 1 # cat /proc/pci PCI devices found: Bus 0, device 0, function 0: Host bridge: VIA Technologies, Inc. VT82C597 [Apollo VP3] (rev 4). Master Capable. Latency=16. Prefetchable 32 bit memory at 0xe0000000 [0xe3ffffff]. Bus 0, device 1, function 0: PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] (rev 0). Master Capable. No bursts. Min Gnt=4. Bus 0, device 7, function 0: ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] (rev 71). Bus 0, device 7, function 1: IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 6). Master Capable. Latency=32. I/O at 0xe000 [0xe00f]. Bus 0, device 7, function 2: USB Controller: VIA Technologies, Inc. UHCI USB (rev 2). Master Capable. Latency=32. I/O at 0xe400 [0xe41f]. Bus 0, device 7, function 3: Host bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 16). Bus 0, device 8, function 0: Multimedia controller: Philips Semiconductors SAA7146 (rev 1). IRQ 11. Master Capable. Latency=32. Min Gnt=15.Max Lat=38. Non-prefetchable 32 bit memory at 0xe4000000 [0xe40001ff]. Bus 0, device 10, function 0: Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 16). IRQ 10. Master Capable. Latency=32. Min Gnt=32.Max Lat=64. I/O at 0xe800 [0xe8ff]. Non-prefetchable 32 bit memory at 0xe4001000 [0xe40010ff]. # cat /var/log/messages Feb 14 22:28:28 bluebox kernel: 8139too Fast Ethernet driver 0.9.22 Feb 14 22:28:28 bluebox kernel: PCI: Found IRQ 11 for device 00:0a.0 Feb 14 22:28:28 bluebox kernel: IRQ routing conflict for 00:0a.0, have irq 10, want irq 11 ^ ? Feb 14 22:28:28 bluebox kernel: eth0: RealTek RTL8139 Fast Ethernet at 0xc883b000, 00:30:84:0d:d3:bf, IRQ 10 Feb 14 22:28:28 bluebox kernel: eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1. Feb 14 22:28:29 bluebox lpd[294]: restarted Feb 14 22:28:51 bluebox kernel: i2c-core.o: i2c core module Feb 14 22:28:51 bluebox kernel: Linux video capture interface: v1.00 Feb 14 22:28:51 bluebox kernel: i2c-core.o: driver VES1893 DVB demodulator registered. Feb 14 22:28:51 bluebox kernel: i2c-core.o: driver VES1820 DVB demodulator registered. Feb 14 22:28:51 bluebox kernel: i2c-core.o: driver L64781 DVB demodulator registered. Feb 14 22:28:51 bluebox kernel: init_SP8870: Feb 14 22:28:51 bluebox kernel: i2c-core.o: driver SP8870 DVB demodulator registered. Feb 14 22:28:51 bluebox kernel: i2c-core.o: driver tda8083 DVB demodulator registered. Feb 14 22:28:51 bluebox kernel: i2c-core.o: driver stv0299 DVB demodulator registered. Feb 14 22:28:51 bluebox kernel: i2c-core.o: driver i2c TV tuner driver registered. Feb 14 22:28:51 bluebox kernel: i2c-core.o: client [VES1893] registered to adapter [saa7146(1)](pos. 0). Feb 14 22:28:52 bluebox kernel: VES1893: attaching VES1893 at 0x10 to adapter saa7146(1) Feb 14 22:28:52 bluebox kernel: SP8870: no SP8870 found ... ^ ? Feb 14 22:28:52 bluebox kernel: tuner: chip found @ 0x61 Feb 14 22:28:52 bluebox kernel: i2c-core.o: client [i2c tv tuner chip] registered to adapter [saa7146(1)](pos. 1). Feb 14 22:28:52 bluebox kernel: i2c-core.o: adapter saa7146(1) registered as adapter 0. ...old 2.2.16 /var/log/messages showed Feb 14 22:42:34 bluebox kernel: i2c-core.o: i2c core module Feb 14 22:42:34 bluebox kernel: Linux video capture interface: v1.00 Feb 14 22:42:35 bluebox kernel: saa7146_core.o: saa7146(1): bus:0, rev:1, mem:0xc889b000. Feb 14 22:42:35 bluebox kernel: VES1893: attaching VES1893 at 0x10 to adapter saa7146(1) Feb 14 22:42:37 bluebox kernel: dvb: ARM firmware successfully loaded. Feb 14 22:42:37 bluebox kernel: dvb: firmware = f0240009 Feb 14 22:42:37 bluebox kernel: dvb: MAC = 00 d0 5c 2d c8 9c Feb 14 22:42:37 bluebox kernel: dvb: 1 dvb(s) found! Feb 14 22:42:37 bluebox kernel: tuner: chip found @ 0x61 ...and worked. -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Feb 15 13:45:10 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 30241 invoked by uid 0); 15 Feb 2002 13:45:10 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 15 Feb 2002 13:45:10 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16bifK-0007zo-00; Fri, 15 Feb 2002 14:44:42 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 15 Feb 2002 14:42:54 +0100 (CET) Received: from aperol.lkn.e-technik.tu-muenchen.de ([129.187.222.163] helo=lkn.e-technik.tu-muenchen.de ident=root) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16biU5-0007Fj-00 for ; Fri, 15 Feb 2002 14:33:05 +0100 Received: from eikon.tum.de (venus [10.152.4.16]) by lkn.e-technik.tu-muenchen.de (8.11.3/8.11.3/SuSE Linux 8.11.1-0.5) with ESMTP id g1FDWfr24964 for ; Fri, 15 Feb 2002 14:32:45 +0100 Sender: navamuel@lkn.ei.tum.de Message-ID: <3C6D0E0F.9DF22ED5@eikon.tum.de> Date: Fri, 15 Feb 2002 14:33:03 +0100 From: Navamuel Castillo Juan Jose Reply-To: jjonc@eikon.tum.de X-Mailer: Mozilla 4.76 [en] (X11; U; SunOS 5.8 sun4u) X-Accept-Language: en MIME-Version: 1.0 To: linux-dvb@linuxtv.org Subject: [linux-dvb] DVB-C, IP broadcast Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable X-MIME-Autoconverted: from 8bit to quoted-printable by lkn.e-technik.tu-muenchen.de id g1FDWfr24964 X-Approved-By: dirk@convergence.de X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: dirk@convergence.de Precedence: bulk X-list: linux-dvb Hi, I'm working at University with a Testbed for IP-DATA Broadcasting on DVB. I'm using a Siemens DVB-C card, and the Testbed work without problems under Windows, because I got the software from Siemens. Now I want to make the Testbed work with Linux, and I don't know how to start. Is there already developed software, which is able to get de IP packets, or should I implement this software using the drivers that I found in linuxtv.org? Thank you very much. Juanjo Navamuel Technische Universit=E4t M=FCnchen -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Feb 15 16:19:56 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 19952 invoked by uid 0); 15 Feb 2002 16:19:56 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 15 Feb 2002 16:19:56 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16bl4t-0004Ow-00; Fri, 15 Feb 2002 17:19:15 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 15 Feb 2002 17:17:07 +0100 (CET) Received: from tiger.cadsoft.de ([212.6.150.2]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16bl2p-0004Bk-00 for ; Fri, 15 Feb 2002 17:17:07 +0100 Received: from cadsoft.de (panther.cadsoft.de [195.38.128.6]) by tiger.cadsoft.de (8.9.3/8.9.3) with ESMTP id RAA17203 for ; Fri, 15 Feb 2002 17:17:06 +0100 Sender: kls@cadsoft.de Message-ID: <3C6D342E.B6D2A222@cadsoft.de> Date: Fri, 15 Feb 2002 17:15:42 +0100 From: Klaus Schmidinger Organization: CadSoft Computer GmbH X-Mailer: Mozilla 4.78 [en] (X11; U; Linux 2.4.10-4GB i686) X-Accept-Language: en, de MIME-Version: 1.0 To: linux-dvb@linuxtv.org Subject: [linux-dvb] DVB-S not working after swapping motherboard Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: Klaus.Schmidinger@cadsoft.de Precedence: bulk X-list: linux-dvb I had a DVB-S card (Siemens rev 1.3) running fine in a Pentium III system at 866 MHz CPU clock. Due to a hardware failure I had to exchange the motherboard, so the system is now an AMD Athlon XP 1900+, running at a clock rate of 1600 MHz (also tested with 1200 MHz, same result). The problem I'm having is that now the driver gives me an error message when loading, and there is no picture coming after loading the driver. Here's what /var/log/messages says: Feb 15 18:01:14 fox kernel: i2c-core.o: i2c core module Feb 15 18:01:14 fox kernel: Linux video capture interface: v1.00 Feb 15 18:01:14 fox kernel: i2c-core.o: driver VES1893 DVB demodulator registered. Feb 15 18:01:14 fox kernel: i2c-core.o: driver VES1820 DVB demodulator registered. Feb 15 18:01:14 fox kernel: i2c-core.o: driver L64781 DVB demodulator registered. Feb 15 18:01:14 fox kernel: init_SP8870: Feb 15 18:01:14 fox kernel: i2c-core.o: driver SP8870 DVB demodulator registered. Feb 15 18:01:14 fox kernel: i2c-core.o: driver tda8083 DVB demodulator registered. Feb 15 18:01:14 fox kernel: i2c-core.o: driver stv0299 DVB demodulator registered. Feb 15 18:01:14 fox kernel: i2c-core.o: driver i2c TV tuner driver registered. Feb 15 18:01:14 fox kernel: saa7146_core.o: saa7146(1): bus:0, rev:1, mem:0xd082a000. Feb 15 18:01:14 fox kernel: SP8870: no SP8870 found ... Feb 15 18:01:14 fox kernel: i2c-core.o: adapter saa7146(1) registered as adapter 0. Feb 15 18:01:22 fox kernel: wait-for-debi-done maxwait: 500000 Feb 15 18:01:22 fox kernel: dvb: debi test in bootarm() failed: 00000000 != 10325476 Feb 15 18:01:22 fox kernel: dvb0: AV7110 - firm 398bc940, rtsl b380c940, vid 00000000, app 54761032 Feb 15 18:01:22 fox kernel: dvb: 1 dvb(s) found! I guess the lines Feb 15 18:01:22 fox kernel: wait-for-debi-done maxwait: 500000 Feb 15 18:01:22 fox kernel: dvb: debi test in bootarm() failed: 00000000 != 10325476 are the ones that indicate the error, but I'm afraid I don't know what to do in order to get around this. I can rule out a hardware failure of the DVB-S card, because I have replaced it with another one and got the same error. I would appreciate any hints about what could be wrong here. Klaus -- _______________________________________________________________ Klaus Schmidinger Phone: +49-8635-6989-10 CadSoft Computer GmbH Fax: +49-8635-6989-40 Hofmark 2 Email: kls@cadsoft.de D-84568 Pleiskirchen, Germany URL: www.cadsoft.de _______________________________________________________________ -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Feb 15 18:45:08 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 32639 invoked by uid 0); 15 Feb 2002 18:45:07 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 15 Feb 2002 18:45:07 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16bnLQ-0000pp-00; Fri, 15 Feb 2002 19:44:28 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 15 Feb 2002 19:42:35 +0100 (CET) Received: from mailout11.sul.t-online.com ([194.25.134.85]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16bnJb-0000Vs-00 for ; Fri, 15 Feb 2002 19:42:35 +0100 Received: from fwd11.sul.t-online.de by mailout11.sul.t-online.com with smtp id 16bnJa-0004pl-05; Fri, 15 Feb 2002 19:42:34 +0100 Received: from diadem.milky.way (04335931990-0001@[62.225.217.63]) by fwd11.sul.t-online.com with esmtp id 16bnJQ-1416zAC; Fri, 15 Feb 2002 19:42:24 +0100 Received: from localhost (crest@localhost) by diadem.milky.way (8.9.3/8.9.3) with ESMTP id TAA02210 for ; Fri, 15 Feb 2002 19:34:17 +0100 Date: Fri, 15 Feb 2002 19:34:17 +0100 (CET) From: rolf.siebrecht@t-online.de (Rolf Siebrecht) To: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: DVB-S not working after swapping motherboard In-Reply-To: <3C6D342E.B6D2A222@cadsoft.de> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-Sender: 04335931990-0001@t-dialin.net X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: rolf.siebrecht@t-online.de Precedence: bulk X-list: linux-dvb Hi! On Fri, 15 Feb 2002, Klaus Schmidinger wrote: > I had a DVB-S card (Siemens rev 1.3) running fine in a Pentium III system > at 866 MHz CPU clock. Due to a hardware failure I had to exchange the > motherboard, so the system is now an AMD Athlon XP 1900+, running at > a clock rate of 1600 MHz (also tested with 1200 MHz, same result). Type of chipset, FSB clock, PCI bus clock, and things... are of more importance here. > [..] > I guess the lines > > Feb 15 18:01:22 fox kernel: wait-for-debi-done maxwait: 500000 > Feb 15 18:01:22 fox kernel: dvb: debi test in bootarm() failed: 00000000 != 10325476 > > are the ones that indicate the error, but I'm afraid I don't know what to do in > order to get around this. Has your DVB card got an IRQ? What kernel version? A 2.4 kernel should mention something about the IRQ in syslog. Else: - PCI DMA settings of chipset - Burst length setting of DEBI DMA port of SAA7146 Bye, Rolf -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Feb 15 19:01:20 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 8276 invoked by uid 0); 15 Feb 2002 19:01:20 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 15 Feb 2002 19:01:20 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16bnbC-0002NE-00; Fri, 15 Feb 2002 20:00:46 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 15 Feb 2002 19:59:45 +0100 (CET) Received: from [212.200.80.243] (helo=mail.bozic.co.yu) by chambertin.convergence.de with smtp (Exim 3.33 #2 ) id 16bnaD-0001MP-00 for ; Fri, 15 Feb 2002 19:59:45 +0100 Received: (qmail 12903 invoked from network); 15 Feb 2002 19:44:58 -0000 Received: from freestyler.bozic.co.yu (HELO there) (212.200.80.248) by mail.bozic.co.yu with SMTP; 15 Feb 2002 19:44:58 -0000 Content-Type: text/plain; charset="iso-8859-1" From: Radisa Jovicevic Reply-To: ras@bozic.co.yu Organization: D.O.O. "Bozic i sinovi" To: linux-dvb@linuxtv.org Subject: [linux-dvb] Thanks Date: Sat, 15 Feb 2003 18:57:27 +0100 X-Mailer: KMail [version 1.3.1] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: ras@bozic.co.yu Precedence: bulk X-list: linux-dvb Thank you all for sending me siemens_dvb_network_activator-0.1.tgz. Everything is working just fine. -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Mon Feb 18 15:03:52 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 2322 invoked by uid 0); 18 Feb 2002 15:03:52 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 18 Feb 2002 15:03:52 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16cpJz-0003yR-00; Mon, 18 Feb 2002 16:03:15 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Mon, 18 Feb 2002 15:58:58 +0100 (CET) Received: from www2.pogled.net ([212.124.183.2] helo=mail.pogled.net) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16cpFp-0002lL-00 for ; Mon, 18 Feb 2002 15:58:58 +0100 Received: from pogled.net ([192.168.0.14]) by mail.pogled.net (Netscape Messaging Server 3.6) with ESMTP id 371 for ; Mon, 18 Feb 2002 16:00:25 +0100 Message-ID: <3C711708.AED649C9@pogled.net> Date: Mon, 18 Feb 2002 16:00:24 +0100 From: Milan Kecman Organization: POGLEDnet X-Mailer: Mozilla 4.6 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: linux-dvb@linuxtv.org Subject: [linux-dvb] driver 0.9.4, network activator and OpenSky Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: mkecman@pogled.net Precedence: bulk X-list: linux-dvb Hi, I have tried to get OpenSky working on kernel 2.4.14 + 0.9.4 + network_activator 0.10, but with no success. EON is working but OpenSky don't. How should I set up channels.conf for szap to tune to OpenSky? Does anybody uses OpenSky with 2.4.14 and siemens-0.9.4 ? Best regards Milan Kecman -- ______________________________ Milan Kecman POGLED net Vojvode Misica 58 18000 Nis Yugoslavia tel./fax. +381 (18) 520-330 355-068 pogled@pogled.net dvbnet@pogled.net www.pogled.com, www.pogled.net ______________________________ -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Mon Feb 18 15:29:26 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 8027 invoked by uid 0); 18 Feb 2002 15:29:26 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 18 Feb 2002 15:29:26 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16cpiZ-0005n0-00; Mon, 18 Feb 2002 16:28:39 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Mon, 18 Feb 2002 16:26:57 +0100 (CET) Received: from leon.ac-toulouse.fr ([194.214.239.85]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16cpgu-0005Fo-00 for ; Mon, 18 Feb 2002 16:26:56 +0100 Received: from leon.ac-toulouse.fr. (localhost [127.0.0.1]) by leon.ac-toulouse.fr (8.9.3/8.9.3) with ESMTP id QAA24859 for ; Mon, 18 Feb 2002 16:13:58 +0100 Received: from Emploi-Jeune.ia-12.in-ac-toulouse.fr ([192.168.66.248]) by leon.ac-toulouse.fr. (8.9.3/8.9.3) with ESMTP id QAA24842; Mon, 18 Feb 2002 16:13:49 +0100 Date: Mon, 18 Feb 2002 16:28:56 +0100 (CET) From: pguiral X-X-Sender: pguiral@Emploi-Jeune.ia-12.in-ac-toulouse.fr To: Milan Kecman cc: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: driver 0.9.4, network activator and OpenSky In-Reply-To: <3C711708.AED649C9@pogled.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: pguiral@free.fr Precedence: bulk X-list: linux-dvb On Mon, 18 Feb 2002, Milan Kecman wrote: > Hi, > > I have tried to get OpenSky working on kernel 2.4.14 + 0.9.4 + > network_activator 0.10, but with no success. > > EON is working but OpenSky don't. > > How should I set up channels.conf for szap to tune to OpenSky? > Does anybody uses OpenSky with 2.4.14 and siemens-0.9.4 ? > You can use 0.8.2 driver with dvbd and 2.4.x kernel, take a look at patch on A. Boros website. I've no tried this solution yet, but seems possible. Since one or two days, I can't login on sdr.eutelsat.net, maybe beta-test period is terminated ? Regards, Pierre. -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Mon Feb 18 15:29:27 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 8033 invoked by uid 0); 18 Feb 2002 15:29:26 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 18 Feb 2002 15:29:26 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16cpiZ-0005mu-00; Mon, 18 Feb 2002 16:28:39 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Mon, 18 Feb 2002 16:26:23 +0100 (CET) Received: from gate.ebv.com ([194.123.184.2]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16cpgM-0005Fa-00 for ; Mon, 18 Feb 2002 16:26:22 +0100 Received: (from smap@localhost) by gate.ebv.com (8.11.6/8.8.7) id g1IFQMg32573 for ; Mon, 18 Feb 2002 16:26:22 +0100 Received: from (bdcexch2.ebv.com [172.23.144.210]) by gate.ebv.com via smap (V1.3) id xmaAjsHki; Mon, 18 Feb 02 16:26:19 +0100 Received: by bdcexch2.ebv.com with Internet Mail Service (5.5.2654.89) id ; Mon, 18 Feb 2002 16:26:18 +0100 Message-ID: <57BE11FAE3878544A20410B638ED3A0026BDF9@EXSRV01.int.ebv.com> From: Zierath Bernd To: "'linux-dvb@linuxtv.org'" Subject: [linux-dvb] Re: driver 0.9.4, network activator and OpenSky Date: Mon, 18 Feb 2002 16:26:12 +0100 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2654.89) Content-Type: text/plain; charset="iso-8859-1" X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: B.Zierath@ebv.com Precedence: bulk X-list: linux-dvb Hi, there is patch for OpenSky http://pguiral.free.fr/DVBS/patch but I did not know if it will work for you. CU Bernd -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Mon Feb 18 17:38:45 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 20551 invoked by uid 0); 18 Feb 2002 17:38:45 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 18 Feb 2002 17:38:45 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16crjp-0000Bs-00; Mon, 18 Feb 2002 18:38:05 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Mon, 18 Feb 2002 18:34:46 +0100 (CET) Received: from net5.telkab.pl ([212.244.185.116] helo=unknown.box) by chambertin.convergence.de with smtp (Exim 3.33 #2 ) id 16crgb-0008Ig-00 for ; Mon, 18 Feb 2002 18:34:45 +0100 Received: (qmail 1340 invoked from network); 18 Feb 2002 17:34:16 -0000 Received: from unknown (HELO jen) (127.0.0.1) by localhost with SMTP; 18 Feb 2002 17:34:16 -0000 Sender: root Message-ID: <3C713A9A.41D9C97B@geocities.com> Date: Mon, 18 Feb 2002 18:32:10 +0100 From: Artur Skawina X-Mailer: Mozilla 3.04 (X11; U; Linux 2.4.2-pre4as-smp i686) MIME-Version: 1.0 To: Peter Bieringer CC: Maillist Linux DVB Subject: [linux-dvb] Re: handling of more than one tuner module References: <48050000.1013978513@localhost> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: skawina@geocities.com Precedence: bulk X-list: linux-dvb Peter Bieringer wrote: > > Is there any solution for the future about handling different tuner > modules? > > Currently I have to use 2 to 3... > Is this a proper way that each new TV card needs its own tuner > module, but name this module like exising one? > > Is this a v4l design issue? Would this be solved sometimes in the > future? v4l/bttv design "issue". tuner "drivers" should have been completely in userspace. [1] [1] w/ the possible exception of tuners that need very frequent attention and/or low latency (afc etc) -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Mon Feb 18 19:27:56 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 22231 invoked by uid 0); 18 Feb 2002 19:27:55 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 18 Feb 2002 19:27:55 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16ctRY-0007Zc-00; Mon, 18 Feb 2002 20:27:20 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Mon, 18 Feb 2002 20:25:21 +0100 (CET) Received: from moutvdom00.kundenserver.de ([195.20.224.149]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16ctPd-00079m-00 for ; Mon, 18 Feb 2002 20:25:21 +0100 Received: from [195.20.224.220] (helo=mrvdom04.kundenserver.de) by moutvdom00.kundenserver.de with esmtp (Exim 2.12 #2) id 16ctPa-0005aC-00 for linux-dvb@linuxtv.org; Mon, 18 Feb 2002 20:25:18 +0100 Received: from [217.80.246.81] (helo=engel) by mrvdom04.kundenserver.de with smtp (Exim 2.12 #2) id 16ctPa-0005rV-00 for linux-dvb@linuxtv.org; Mon, 18 Feb 2002 20:25:18 +0100 From: "Florian Engelmann" To: Subject: [linux-dvb] Re: The contrast of my PAL output is VERY bad!?! Date: Mon, 18 Feb 2002 20:25:16 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) Importance: Normal In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: engelmann@etecs.de Precedence: bulk X-list: linux-dvb > On Sat, 16 Feb 2002 16:05:05 +0100, "Engelmann F." > wrote: > > > i just installed DVB and VDR 0.99 on my Debian Woody System. > Works Great!!! > > I think i will sell my MM9800s, but till now the contrast of my DVB card > > (Hauppauge DVB-s 1.3) is VERY poor!! The colores are also not > the best... it > > does NOT look like a digital film - looks like an old VHS tape!? > > Is something wrong with my DVB-s card? Do i have to use a > shorter cable to > > my TV (its about 1,5 meter)? Is there any jumper i have to change? > > You have a 1.3 card, why aren't you using S-Video from the internal > connector? > > Anyway, there must be something wrong with your card or the cable. I > assume you have only connected the TV to the composite output. > > Here the quality with composite is quite good, but with S-Video it is > noticable better. > > Emil > ok - i will try s-video - but how? do i need to build my own adapter? any url out there? thx again Florian -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Mon Feb 18 19:27:56 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 22237 invoked by uid 0); 18 Feb 2002 19:27:56 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 18 Feb 2002 19:27:56 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16ctRY-0007Za-00; Mon, 18 Feb 2002 20:27:20 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Mon, 18 Feb 2002 20:24:26 +0100 (CET) Received: from [212.84.236.169] (helo=skunk.convergence.de) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16ctOk-000738-00 for ; Mon, 18 Feb 2002 20:24:26 +0100 Received: by convergence.de via sendmail from stdin id (Debian Smail3.2.0.114) for linux-dvb@linuxtv.org; Mon, 18 Feb 2002 20:23:28 +0100 (CET) Date: Mon, 18 Feb 2002 20:23:28 +0100 From: Denis Oliver Kropp To: Gregoire Favre Cc: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: 2.5.5-pre1? Message-ID: <20020218192328.GA27401@skunk.convergence.de> Reply-To: Denis Oliver Kropp References: <20020218000638.GA16543@ulima.unil.ch> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20020218000638.GA16543@ulima.unil.ch> User-Agent: Mutt/1.3.27i X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: dok@directfb.org Precedence: bulk X-list: linux-dvb Quoting Gregoire Favre (greg@ulima.unil.ch): > Hello, > > as I didn't understand how to patch using patch, I done it by hand. > Unfortunately, under 2.5.5-pre1 (first version including ALSA) I got: > gcc -D__KERNEL__ -I/usr/src/linux-2.5/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -DMODULE -I ../ost/include -I . -D__DVB_PACK__ -g -DUSE_OSD -DKBUILD_BASENAME=saa7146_core -DEXPORT_SYMTAB -c saa7146_core.c > In file included from saa7146_core.c:149: > saa7146.c: In function `i2c_busy_rise_and_fall': > saa7146.c:1289: structure has no member named `work' > saa7146.c:1314: structure has no member named `work' > make[2]: *** [saa7146_core.o] Error 1 > make[2]: Leaving directory `/usr/src/DVB-2.5.5-pre1/driver' > make[1]: *** [_mod_/usr/src/DVB-2.5.5-pre1/driver] Error 2 > make[1]: Leaving directory `/usr/src/linux-2.5' > make: *** [here] Error 2 > Exit 2 > > And I don't understand what I have done false :-(( It seems that these lines only apply to the -dj tree: > #define SAA7146_RESCHED \ > do { \ > - if (current->need_resched) \ > + if (current->work.need_resched) \ > schedule(); \ > } while (0) -- Best regards, Denis Oliver Kropp .------------------------------------------. | DirectFB - Hardware accelerated graphics | | http://www.directfb.org/ | "------------------------------------------" convergence integrated media GmbH -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Mon Feb 18 20:11:15 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 4547 invoked by uid 0); 18 Feb 2002 20:11:14 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 18 Feb 2002 20:11:14 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16cu7O-0002UI-00; Mon, 18 Feb 2002 21:10:34 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Mon, 18 Feb 2002 21:08:27 +0100 (CET) Received: from mail.gmx.net ([213.165.64.20]) by chambertin.convergence.de with smtp (Exim 3.33 #2 ) id 16cu5H-00028h-00 for ; Mon, 18 Feb 2002 21:08:23 +0100 Received: (qmail 1082 invoked by uid 0); 18 Feb 2002 20:08:02 -0000 Received: from b782f.pppool.de (HELO c333) (213.7.120.47) by mail.gmx.net (mp011-rz3) with SMTP; 18 Feb 2002 20:08:02 -0000 Message-Id: <3.0.6.32.20020218210757.00b2fcc0@pop.gmx.net> X-Sender: 1689079@pop.gmx.net X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.6 (32) Date: Mon, 18 Feb 2002 21:07:57 +0100 To: linux-dvb@linuxtv.org From: Joerg Karwath Subject: [linux-dvb] Re: The contrast of my PAL output is VERY bad!?! In-Reply-To: References: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: karjo@gmx.de Precedence: bulk X-list: linux-dvb Same with my 1.3 card. First 3 months were ok, then the same contrast problems. I got it exchanged on gurantee, then it was ok again Joerg At 12:05 18.02.02 +0100, you wrote: >I've got the same problem here with a 1.3 card and the composite video >connector. >With a 1.6 card everything is OK. > >Dany > >-----Original Message----- >From: linux-dvb-bounce@linuxtv.org >[mailto:linux-dvb-bounce@linuxtv.org]On Behalf Of Emil Naepflein >Sent: Saturday, February 16, 2002 4:26 PM >To: linux-dvb@linuxtv.org >Subject: [linux-dvb] Re: The contrast of my PAL output is VERY bad!?! > > >On Sat, 16 Feb 2002 16:05:05 +0100, "Engelmann F." >wrote: > >> i just installed DVB and VDR 0.99 on my Debian Woody System. Works >Great!!! >> I think i will sell my MM9800s, but till now the contrast of my DVB card >> (Hauppauge DVB-s 1.3) is VERY poor!! The colores are also not the best... >it >> does NOT look like a digital film - looks like an old VHS tape!? >> Is something wrong with my DVB-s card? Do i have to use a shorter cable to >> my TV (its about 1,5 meter)? Is there any jumper i have to change? > >You have a 1.3 card, why aren't you using S-Video from the internal >connector? > >Anyway, there must be something wrong with your card or the cable. I >assume you have only connected the TV to the composite output. > >Here the quality with composite is quite good, but with S-Video it is >noticable better. > >Emil > > > > > >-- >Info: >To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. > > -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Mon Feb 18 21:30:02 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 29237 invoked by uid 0); 18 Feb 2002 21:30:02 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 18 Feb 2002 21:30:02 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16cvLi-0006kx-00; Mon, 18 Feb 2002 22:29:26 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Mon, 18 Feb 2002 22:26:37 +0100 (CET) Received: from ulima.unil.ch ([130.223.144.143]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16cvIz-0006Hr-00 for ; Mon, 18 Feb 2002 22:26:37 +0100 Received: by ulima.unil.ch (Postfix, from userid 500) id CE25C33618; Mon, 18 Feb 2002 22:26:32 +0100 (CET) Date: Mon, 18 Feb 2002 22:26:32 +0100 From: Gregoire Favre To: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: 2.5.5-pre1? Message-ID: <20020218212632.GB11945@ulima.unil.ch> References: <20020218000638.GA16543@ulima.unil.ch> <20020218192328.GA27401@skunk.convergence.de> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <20020218192328.GA27401@skunk.convergence.de> User-Agent: Mutt/1.3.27i X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: greg@ulima.unil.ch Precedence: bulk X-list: linux-dvb Hello, great: I finaly got it compiled, now it's time to boot the new kernel ;-) Thanks you very much, Grégoire ________________________________________________________________ http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Mon Feb 18 21:30:21 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 31741 invoked by uid 0); 18 Feb 2002 21:30:20 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 18 Feb 2002 21:30:20 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16cvM6-0006om-00; Mon, 18 Feb 2002 22:29:50 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Mon, 18 Feb 2002 22:28:13 +0100 (CET) Received: from ulima.unil.ch ([130.223.144.143]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16cvKW-0006Vj-00 for ; Mon, 18 Feb 2002 22:28:12 +0100 Received: by ulima.unil.ch (Postfix, from userid 500) id 9269B322CC; Mon, 18 Feb 2002 22:28:11 +0100 (CET) Date: Mon, 18 Feb 2002 22:28:11 +0100 From: Gregoire Favre To: linux-dvb@linuxtv.org Subject: [linux-dvb] Real CAM support? Message-ID: <20020218212811.GC11945@ulima.unil.ch> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit User-Agent: Mutt/1.3.27i X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: greg@ulima.unil.ch Precedence: bulk X-list: linux-dvb Hello, after the soft CAM problem, is there some plan to handle better the right CAM with real subscription? Thanks you very much, Grégoire ________________________________________________________________ http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Mon Feb 18 21:42:16 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 1349 invoked by uid 0); 18 Feb 2002 21:42:16 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 18 Feb 2002 21:42:16 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16cvXc-0008AM-00; Mon, 18 Feb 2002 22:41:44 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Mon, 18 Feb 2002 22:40:05 +0100 (CET) Received: from mail3.home.nl ([213.51.129.227]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16cvW1-0007xP-00 for ; Mon, 18 Feb 2002 22:40:05 +0100 Received: from there ([213.51.75.178]) by mail3.home.nl (InterMail vM.4.01.03.00 201-229-121) with SMTP id <20020218213847.TNIL17184.mail3.home.nl@there> for ; Mon, 18 Feb 2002 22:38:47 +0100 Content-Type: text/plain; charset="iso-8859-15" From: Dennis Noordsij To: "dvb" Subject: [linux-dvb] DVB-C Date: Mon, 18 Feb 2002 22:38:56 +0200 X-Mailer: KMail [version 1.3.2] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20020218213847.TNIL17184.mail3.home.nl@there> X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: dennis.noordsij@wiral.com Precedence: bulk X-list: linux-dvb Hi, Before I buy a DVB-C card I would like ask just a few more questions. First is the MPEG decoder on-board. Does it force you to use the tv-out or can it also give the decoded frames back to the PC to show on the monitor? I.e. the hollywood plus decoder for example uses a VGA overlay trick to display on the monitor, but I can't use that because the videocard never really sees the tv overlay, and so it won't send it to the tv-out either (i would like to use the tv-out on the videocard). If the DVB card can display hardware accelerated in a window (using MPlayer for example) that would be really great. Second is about the future, will future extensions, i.e. MHP related, all be in software, or will it need hardware upgrades? In other words, will I be safe with this card for a while? (For use in Finland). And finally, where to buy the card?? I am currently in Holland, so I can buy it here, in Belgium or in Germany (it's nowhere to be found in Finland, unlike the DVB-S and DVB-T) but none of shops in the links on the linuxtv.org pages either have the card at all, or will have one in stock anytime soon. Someone in Holland/Belgium/Germany *please* tell me where I can find a card, just to pay for it and pick it up (i.e. no ordering). Thanks for any replies, Best regards, Dennis -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Tue Feb 19 07:20:50 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 29710 invoked by uid 0); 19 Feb 2002 07:20:49 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 19 Feb 2002 07:20:49 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16d4ZR-0003lJ-00; Tue, 19 Feb 2002 08:20:13 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 19 Feb 2002 08:17:24 +0100 (CET) Received: from [212.54.107.183] (helo=dingo.srr.ro) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16d4Wg-0003WC-00 for ; Tue, 19 Feb 2002 08:17:23 +0100 Received: from srr.ro by dingo.srr.ro (8.9.3/8.9.3) with ESMTP id JAA17506; Tue, 19 Feb 2002 09:16:50 +0200 Message-ID: <3C71FBE1.9094CCFD@srr.ro> Date: Tue, 19 Feb 2002 09:16:49 +0200 From: Andrei Boros Organization: Societatea Romana de Radiodifuziune X-Mailer: Mozilla 4.75 [en] (Win95; U) X-Accept-Language: en MIME-Version: 1.0 To: pguiral , linux-dvb@linuxtv.org Subject: [linux-dvb] Re: driver 0.9.4, network activator and OpenSky References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: andrei@srr.ro Precedence: bulk X-list: linux-dvb pguiral wrote: > > > You can use 0.8.2 driver with dvbd and 2.4.x kernel, take a look at > patch on A. Boros website. > I've no tried this solution yet, but seems possible. requirements : dvb-0.8.2 original. patch by Rolf Siebrecht which makes compilation on 2.4 kernels possible dvbd3a or later dvbd3a and documentation for it can be found on my site http://members.tripod.com/andrei_b See dvb links for Rolf's patch. -- ing. Andrei Boros mailto:andrei@srr.ro / +40-1-303-1870 Centrul pt. Tehnologia Informatiei Societatea Romana de Radiodifuziune -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Tue Feb 19 07:36:17 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 2112 invoked by uid 0); 19 Feb 2002 07:36:17 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 19 Feb 2002 07:36:17 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16d4oQ-000546-00; Tue, 19 Feb 2002 08:35:42 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 19 Feb 2002 08:33:59 +0100 (CET) Received: from [151.17.240.110] (helo=sardegna.mbigroup.it) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16d4mk-0004og-00 for ; Tue, 19 Feb 2002 08:33:59 +0100 Received: from sicilia.mbigroup.it (suez.mbigroup.it.240.17.151.in-addr.arpa [151.17.240.106] (may be forged)) by sardegna.mbigroup.it (8.11.0/8.8.7) with ESMTP id g1J7XQF16361 for ; Tue, 19 Feb 2002 08:33:26 +0100 Received: from tin.it (malta.mbi.net [192.168.9.103]) by sicilia.mbigroup.it (8.11.2/8.8.7) with ESMTP id g1J7XEt30266 for ; Tue, 19 Feb 2002 08:33:21 +0100 Message-ID: <3C720DCA.1030707@tin.it> Date: Tue, 19 Feb 2002 09:33:14 +0100 From: Attilio Vaccaro User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:0.9.4) Gecko/20011126 Netscape6/6.2.1 X-Accept-Language: en-us MIME-Version: 1.0 To: linux-dvb Subject: [linux-dvb] Re: driver 0.9.4, network activator and OpenSky References: Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: vattila@tin.it Precedence: bulk X-list: linux-dvb pguiral wrote: > >Since one or two days, I can't login on sdr.eutelsat.net, maybe beta-test >period is terminated ? > No, the test phase is still on. I'm using Open-Sky correctly and I'm not experimenting these problems. Did you compile the online questionnaire? I think that the accounts of these people that didn't compile the form have been disabled. Attilio -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Tue Feb 19 07:38:57 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 2393 invoked by uid 0); 19 Feb 2002 07:38:57 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 19 Feb 2002 07:38:57 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16d4r2-0005NE-00; Tue, 19 Feb 2002 08:38:24 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 19 Feb 2002 08:36:51 +0100 (CET) Received: from www2.pogled.net ([212.124.183.2] helo=mail.pogled.net) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16d4pX-0005AY-00 for ; Tue, 19 Feb 2002 08:36:51 +0100 Received: from pogled.net ([192.168.0.14]) by mail.pogled.net (Netscape Messaging Server 3.6) with ESMTP id 687 for ; Tue, 19 Feb 2002 08:38:36 +0100 Message-ID: <3C7200FB.A31C2EC3@pogled.net> Date: Tue, 19 Feb 2002 08:38:36 +0100 From: Milan Kecman Organization: POGLEDnet X-Mailer: Mozilla 4.6 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: driver 0.9.4, network activator and OpenSky References: <3C71FBE1.9094CCFD@srr.ro> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: mkecman@pogled.net Precedence: bulk X-list: linux-dvb Hi, I have compiled 0.8.2 vith patch-8, modprobe dvb loads the modules, i get no errors. I compiled dvbd 3a, and when I run it, it just (I hope) does his job, and ends, not like dvbd2 and dvbd3 whitch were displaying sync and other parameters. Is this correct behavior of dvbd3a? Best regards Milan Kecman Andrei Boros wrote: > pguiral wrote: > > > > > > You can use 0.8.2 driver with dvbd and 2.4.x kernel, take a look at > > patch on A. Boros website. > > I've no tried this solution yet, but seems possible. > > requirements : > dvb-0.8.2 original. > patch by Rolf Siebrecht which makes compilation on 2.4 kernels possible > dvbd3a or later > > dvbd3a and documentation for it can be found on my site > http://members.tripod.com/andrei_b > See dvb links for Rolf's patch. > > > -- > ing. Andrei Boros > mailto:andrei@srr.ro / +40-1-303-1870 > Centrul pt. Tehnologia Informatiei > Societatea Romana de Radiodifuziune > > -- > Info: > To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Tue Feb 19 08:37:16 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 21585 invoked by uid 0); 19 Feb 2002 08:37:16 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 19 Feb 2002 08:37:16 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16d5lR-0008Uo-00; Tue, 19 Feb 2002 09:36:41 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 19 Feb 2002 09:34:22 +0100 (CET) Received: from mailout07.sul.t-online.com ([194.25.134.83]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16d5jC-0008A0-00 for ; Tue, 19 Feb 2002 09:34:22 +0100 Received: from fwd07.sul.t-online.de by mailout07.sul.t-online.com with smtp id 16d5Vp-0003ra-0G; Tue, 19 Feb 2002 09:20:33 +0100 Received: from diadem.milky.way (04335931990-0001@[62.224.52.252]) by fwd07.sul.t-online.com with esmtp id 16d5Vi-0f1rRQC; Tue, 19 Feb 2002 09:20:26 +0100 Received: from localhost (crest@localhost) by diadem.milky.way (8.9.3/8.9.3) with ESMTP id JAA02213 for ; Tue, 19 Feb 2002 09:18:58 +0100 Date: Tue, 19 Feb 2002 09:18:58 +0100 (CET) From: rolf.siebrecht@t-online.de (Rolf Siebrecht) To: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: driver 0.9.4, network activator and OpenSky In-Reply-To: <3C7200FB.A31C2EC3@pogled.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-Sender: 04335931990-0001@t-dialin.net X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: rolf.siebrecht@t-online.de Precedence: bulk X-list: linux-dvb Hi! On Tue, 19 Feb 2002, Milan Kecman wrote: > I have compiled 0.8.2 vith patch-8, modprobe dvb loads the modules, i get no errors. > I compiled dvbd 3a, and when I run it, it just (I hope) does his job, and ends, not like > dvbd2 and dvbd3 whitch were displaying sync and other parameters. > > Is this correct behavior of dvbd3a? No, started without any options it should continuously display the frontend status parameters. For a premature finishing - after configuration settings have been established - an extra option is needed. Did you look at your syslog file? Are there useful infos? Does tcpdump report incoming packets? Work is in progress for a new revision of dvb3a which shows important startup messages directly at the command line prompt. Plus a "profile" feature that allows a selection among several preset transponders. Bye, Rolf -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Tue Feb 19 08:45:01 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 22178 invoked by uid 0); 19 Feb 2002 08:45:01 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 19 Feb 2002 08:45:01 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16d5sy-0000XT-00; Tue, 19 Feb 2002 09:44:28 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 19 Feb 2002 09:42:47 +0100 (CET) Received: from www2.pogled.net ([212.124.183.2] helo=mail.pogled.net) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16d5rK-0000KM-00 for ; Tue, 19 Feb 2002 09:42:46 +0100 Received: from pogled.net ([192.168.0.14]) by mail.pogled.net (Netscape Messaging Server 3.6) with ESMTP id 762 for ; Tue, 19 Feb 2002 09:44:32 +0100 Message-ID: <3C72106F.2C9E1DA5@pogled.net> Date: Tue, 19 Feb 2002 09:44:31 +0100 From: Milan Kecman Organization: POGLEDnet X-Mailer: Mozilla 4.6 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: driver 0.9.4, network activator and OpenSky References: <3C71FBE1.9094CCFD@srr.ro> <3C7200FB.A31C2EC3@pogled.net> <3C720961.1FA69CCB@srr.ro> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: mkecman@pogled.net Precedence: bulk X-list: linux-dvb Hi, I had /dev/video as directory, so dvbd didn't start because ot that. Now it starts, first line sais sync 64 or 96, and after that any other output is sync=0, and ping to EON proxy does not work. After I stop dvbd, i cant do modprobe -r dvb, get the message devise or resource is busy. dvbd puts the following in the logfile: Feb 19 09:25:43 proxy dvbd[1492]: reading config Feb 19 09:25:43 proxy dvbd[1492]: IP(net) for filter_0 is x.y.z.w/255.255. 255.255 Feb 19 09:25:43 proxy dvbd[1492]: activating This part is working, but I've set in /etc/dvbd.conf v4l_ifname /dev/video0 is the video0 right device? After I do modprobe dvb I hear on speakers sound from a channel No. 3. After dvbd there is no sound. Where should I look further? Best regards Milan Kecman Andrei Boros wrote: > Milan Kecman wrote: > > > > I have compiled 0.8.2 vith patch-8, modprobe dvb loads the modules, i get no errors. > > I compiled dvbd 3a, and when I run it, it just (I hope) does his job, and ends, not like > > dvbd2 and dvbd3 whitch were displaying sync and other parameters. > > > > Is this correct behavior of dvbd3a? > > > > No output at all? Or other/different output? > Can you give me an example of the latter case if applicable? > > What appears in your system logs from dvbd? > > do you have /dev/video -> /dev/video0 devices? > > -- > ing. Andrei Boros > mailto:andrei@srr.ro / +40-1-303-1870 > Centrul pt. Tehnologia Informatiei > Societatea Romana de Radiodifuziune -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Tue Feb 19 09:13:11 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 31587 invoked by uid 0); 19 Feb 2002 09:13:11 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 19 Feb 2002 09:13:11 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16d6KD-0002nw-00; Tue, 19 Feb 2002 10:12:37 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 19 Feb 2002 10:10:46 +0100 (CET) Received: from mail.s.netic.de ([212.9.160.11] helo=mail.netic.de) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16cs0Q-0000ms-00 for ; Mon, 18 Feb 2002 18:55:14 +0100 Received: by mail.netic.de (Smail3.2.0.111/mail.s.netic.de) via LF.net GmbH Internet Services via remoteip 195.252.189.178 via remotehost there with smtp for chambertin.convergence.de id m16cs0P-001XEEC; Mon, 18 Feb 2002 18:55:13 +0100 (CET) Message-Id: Content-Type: text/plain; charset="iso-8859-1" From: Goofy To: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: vdr and "softcam"? Date: Mon, 18 Feb 2002 18:54:24 +0100 X-Mailer: KMail [version 1.3.1] References: <3C61C768.3070108@nothing-on.tv> <4b0a2cb85dfruit@ukgateway.net> In-Reply-To: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Approved-By: dirk@convergence.de X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: dirk@convergence.de Precedence: bulk X-list: linux-dvb > Profit incentive is only one of the reasons for innovation. > > The industry did not invent services like the World Wide Web or > Napster, nor did they invent Linux - still they exist. Exactly, not all software companies have the money to protect themselfes by and against patent/copyright-lawsuits. M$ tries to crack OS development exactly this way, and the next time their anti-thrust lawsuit will be decided, that is a very important thing for OS movement as well as other software companies. > The major reason for innovation is the need for a solution of an > existing problem. If the industry doesn't offer the devices and > services their customers want to have, people will build them on their > own. There is one perfectly legal thing we all around the world can do about: Don't buy any of these devices, talk to your friends neighbors and so on, discuss the implications, the price/service relation. The same thing applies for _any_ piece of hardware - do not buy unless they support open source. PW is almost bankrupt anyway, despite the high prices - that tells us something about the prices in near future...and DVD's are _way_ to expensive too, IMHO. Why can they do that - only because of the trick with the patents! Why do you think the quality of free-tv has become so bad? Because the PayTV broadcasters buy away any good movies, and in the case it's the same company - they just try to make more money out of the same things to broadcast. So hold on just a bit longer and free-tv will become better again. The time PayTV becomes 5 to 10 times cheaper because of enough competition i will eventually reconsider. Finally - maybe there will once be a FreeFilmFoundation, which will have it's own producers, actors, technics, ... to make good and free movies. The basics are already there - software for that is available under GPL. -just my opinion- -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Tue Feb 19 09:30:58 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 8265 invoked by uid 0); 19 Feb 2002 09:30:58 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 19 Feb 2002 09:30:58 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16d6bR-0004m6-00; Tue, 19 Feb 2002 10:30:25 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 19 Feb 2002 10:28:30 +0100 (CET) Received: from beta.dmz-eu.st.com ([164.129.1.35]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16d6ZZ-0003fj-00 for ; Tue, 19 Feb 2002 10:28:30 +0100 Received: from zeta.dmz-eu.st.com (zeta.dmz-eu.st.com [164.129.230.9]) by beta.dmz-eu.st.com (STMicroelectronics) with SMTP id 1CEB14949 for ; Tue, 19 Feb 2002 09:27:54 +0000 (GMT) Received: by zeta.dmz-eu.st.com (STMicroelectronics, from userid 0) id 1180A624D; Tue, 19 Feb 2002 09:28:51 +0000 (GMT) Received: from thistle.bri.st.com (localhost [127.0.0.1]) by zeta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 6A03E1845 for ; Tue, 19 Feb 2002 09:28:50 +0000 (GMT) Received: from hemlock ([164.129.8.37] helo=hemlock.bristol.st.com) by thistle.bristol.st.com with esmtp (Exim 3.03 #5) id 16d6Yy-00043L-00 for linux-dvb@linuxtv.org; Tue, 19 Feb 2002 09:27:52 +0000 Received: from localhost (root@localhost) by hemlock.bristol.st.com (8.8.6 (PHNE_17135)/8.8.6) with ESMTP id JAA22447 for ; Tue, 19 Feb 2002 09:27:51 GMT X-OpenMail-Hops: 1 Date: Tue, 19 Feb 2002 09:27:51 +0000 Message-Id: Subject: [linux-dvb] Re: UNSUSCRIBE MIME-Version: 1.0 From: tony.debling@st.com To: linux-dvb@linuxtv.org Content-type: text/plain X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: tony.debling@st.com Precedence: bulk X-list: linux-dvb UNSUSCRIBE -- No attachments (even text) are allowed -- -- Type: text/plain -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Tue Feb 19 10:01:17 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 18595 invoked by uid 0); 19 Feb 2002 10:01:16 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 19 Feb 2002 10:01:16 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16d74j-0007NJ-00; Tue, 19 Feb 2002 11:00:41 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 19 Feb 2002 10:58:26 +0100 (CET) Received: from gw-nl4.philips.com ([212.153.190.6]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16d72Y-00067G-00 for ; Tue, 19 Feb 2002 10:58:26 +0100 Received: from smtpscan-nl2.philips.com (localhost.philips.com [127.0.0.1]) by gw-nl4.philips.com with ESMTP id KAA14722 for ; Tue, 19 Feb 2002 10:57:24 +0100 (CET) (envelope-from stuart.butterfield@philips.com) From: stuart.butterfield@philips.com Received: from smtpscan-nl2.philips.com(130.139.36.22) by gw-nl4.philips.com via mwrap (4.0a) id xma014720; Tue, 19 Feb 02 10:57:24 +0100 Received: from smtprelay-nl1.philips.com (localhost [127.0.0.1]) by smtpscan-nl2.philips.com (8.9.3/8.8.5-1.2.2m-19990317) with ESMTP id KAA06718 for ; Tue, 19 Feb 2002 10:58:24 +0100 (MET) Received: from hbg001soh.diamond.philips.com (e1soh01.diamond.philips.com [130.143.165.212]) by smtprelay-nl1.philips.com (8.9.3/8.8.5-1.2.2m-19990317) with ESMTP id KAA16555 for ; Tue, 19 Feb 2002 10:58:23 +0100 (MET) To: Subject: [linux-dvb] USB support? Date: Tue, 19 Feb 2002 09:51:00 +0000 Message-ID: X-MIMETrack: Serialize by Router on hbg001soh/H/SERVER/PHILIPS(Release 5.0.5 |September 22, 2000) at 19/02/2002 11:17:03 MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: stuart.butterfield@philips.com Precedence: bulk X-list: linux-dvb Hi all, Quick question: is there any ongoing or planned effort to support the various USB DVB devices out there? If so, I'd be willing to pitch in and help in any way I can. If not, would anyone careto comment on the difficulty of such a project and likely problems? Thanks Stuart -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Tue Feb 19 10:01:17 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 18599 invoked by uid 0); 19 Feb 2002 10:01:17 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 19 Feb 2002 10:01:17 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16d74j-0007Nk-00; Tue, 19 Feb 2002 11:00:41 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 19 Feb 2002 10:59:09 +0100 (CET) Received: from leon.ac-toulouse.fr ([194.214.239.85]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16d73F-00069S-00 for ; Tue, 19 Feb 2002 10:59:09 +0100 Received: from leon.ac-toulouse.fr. (localhost [127.0.0.1]) by leon.ac-toulouse.fr (8.9.3/8.9.3) with ESMTP id LAA10217 for ; Tue, 19 Feb 2002 11:01:11 +0100 Received: from Emploi-Jeune.ia-12.in-ac-toulouse.fr ([192.168.66.248]) by leon.ac-toulouse.fr. (8.9.3/8.9.3) with ESMTP id KAA04974; Tue, 19 Feb 2002 10:26:08 +0100 Date: Tue, 19 Feb 2002 10:26:14 +0100 (CET) From: pguiral X-X-Sender: pguiral@Emploi-Jeune.ia-12.in-ac-toulouse.fr To: Attilio Vaccaro cc: linux-dvb Subject: [linux-dvb] Re: driver 0.9.4, network activator and OpenSky In-Reply-To: <3C720DCA.1030707@tin.it> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: pguiral@free.fr Precedence: bulk X-list: linux-dvb On Tue, 19 Feb 2002, Attilio Vaccaro wrote: > pguiral wrote: > > > > >Since one or two days, I can't login on sdr.eutelsat.net, maybe beta-test > >period is terminated ? > > > No, the test phase is still on. > > I'm using Open-Sky correctly and I'm not experimenting these problems. > > Did you compile the online questionnaire? I think that the accounts of > these people that didn't compile the form have been disabled. > > Attilio You are right, that work now. I got temporarily a disabled account. Thanks. Pierre. -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Tue Feb 19 12:31:47 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 31501 invoked by uid 0); 19 Feb 2002 12:31:47 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 19 Feb 2002 12:31:47 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16d9QP-0004xV-00; Tue, 19 Feb 2002 13:31:13 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 19 Feb 2002 13:26:10 +0100 (CET) Received: from www2.pogled.net ([212.124.183.2] helo=mail.pogled.net) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16d9LW-0003Um-00 for ; Tue, 19 Feb 2002 13:26:10 +0100 Received: from pogled.net ([192.168.0.14]) by mail.pogled.net (Netscape Messaging Server 3.6) with ESMTP id 303 for ; Tue, 19 Feb 2002 13:27:49 +0100 Message-ID: <3C7244C5.6EA98E2D@pogled.net> Date: Tue, 19 Feb 2002 13:27:49 +0100 From: Milan Kecman Organization: POGLEDnet X-Mailer: Mozilla 4.6 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: driver 0.9.4, network activator and OpenSky References: <3C71FBE1.9094CCFD@srr.ro> <3C7200FB.A31C2EC3@pogled.net> <3C720961.1FA69CCB@srr.ro> <3C72106F.2C9E1DA5@pogled.net> <3C721830.C2CE95BC@srr.ro> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: mkecman@pogled.net Precedence: bulk X-list: linux-dvb Hi, I have tried sdr and i get 5.3db, with 0.8.2 on 2.4.14 kernel. Now I am downloading 2.4.11 kernel, to see, if it depends on the kernel version. With 0.9.4 drivers I have good recepcion, but no multicast (as I recall postings here, and somebody said that for opensky I need multicast). Best regards Milan Kecman -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Tue Feb 19 12:43:30 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 32481 invoked by uid 0); 19 Feb 2002 12:43:30 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 19 Feb 2002 12:43:30 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16d9bm-0005ma-00; Tue, 19 Feb 2002 13:42:58 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 19 Feb 2002 13:40:02 +0100 (CET) Received: from obtanium.ierm.ed.ac.uk ([129.215.136.99]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16d9Yw-0005Oj-00 for ; Tue, 19 Feb 2002 13:40:02 +0100 Received: from localhost (localhost [[UNIX: localhost]]) by obtanium.ierm.ed.ac.uk (8.11.2/8.11.2) id g1JCe8w02146 for linux-dvb@linuxtv.org; Tue, 19 Feb 2002 12:40:08 GMT Content-Type: text/plain; charset="iso-8859-1" From: Jasper Taylor To: linux-dvb@linuxtv.org Subject: [linux-dvb] Software you might find useful Date: Tue, 19 Feb 2002 12:40:08 +0000 X-Mailer: KMail [version 1.2] MIME-Version: 1.0 Message-Id: <02021912400800.02128@obtanium> Content-Transfer-Encoding: 8bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: jasper.taylor@ed.ac.uk Precedence: bulk X-list: linux-dvb Hi folks. I am one of the happy few to have a Hauppauge NOVA-T PCI card working in my Linux box. This I did by following Scott White's excellent HOWTO, but using the latest version of dvbstream to send a transport stream to stdout. I'm watching with mplayer, and apart from the fact that if I'm not root I get poor sound/vision sync, all is well. Then I wanted to do unattended recording to my hard disk. I can't use VDR because I don't have a card with a hardware MPEG decoder, so I wrote an application in TclTk enabling me to set recording times from a simple GUI. It also allows you to watch any channel or MPEG file through the same interface. You can download it from http://www.ed.ac.uk/~jtaylor/telly.tcl Points to note: * Your dvb drivers must already be loaded * It uses the ~/.tzap/channels.conf created by Scott's setup process * App must be running when record happens * Horizon is probably 2^31 ms == about 3 weeks * Currently no facility to list or cancel scheduled record operations I don't intend to develop this any further as I want to redo it with the mbone broadcast system to enable watching and recording at the same time. I'm just offering it (without guarantee of course!) in case anyone finds it useful. Enjoy! --Jasper -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Tue Feb 19 13:00:20 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 7395 invoked by uid 0); 19 Feb 2002 13:00:19 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 19 Feb 2002 13:00:19 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16d9s3-0006xl-00; Tue, 19 Feb 2002 13:59:47 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 19 Feb 2002 13:56:35 +0100 (CET) Received: from neptun.sns-felb.debis.de ([53.122.101.2]) by chambertin.convergence.de with smtp (Exim 3.33 #2 ) id 16d9ow-0006WY-00 for ; Tue, 19 Feb 2002 13:56:34 +0100 Received: by neptun.sns-felb.debis.de; id NAA29792; Tue, 19 Feb 2002 13:56:33 +0100 Received: from unknown(53.113.82.10) by neptun.sns-felb.debis.de via smap (V5.0) id xma029771; Tue, 19 Feb 02 13:56:25 +0100 Received: from mail1.es1.dsh.de (localhost [127.0.0.1]) by dshmail1.dsh.de (8.9.1/8.8.7) with ESMTP id NAA02140 for ; Tue, 19 Feb 2002 13:56:35 +0100 (MET) Received: from gmx.de ([53.113.99.219]) by mail1.es1.dsh.de (Post.Office MTA v3.5.3 release 223 ID# 127-62637U3000L300S0V35) with ESMTP id de for ; Tue, 19 Feb 2002 13:55:52 +0100 Message-ID: <3C724B80.80855447@gmx.de> Date: Tue, 19 Feb 2002 13:56:32 +0100 From: Andreas Portz Organization: Wilde Reiter GmbH X-Mailer: Mozilla 4.76 [en] (Windows NT 5.0; U) X-Accept-Language: de,en MIME-Version: 1.0 To: linux-dvb@linuxtv.org Subject: [linux-dvb] which DVB-S? Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: Andreas.Portz@gmx.de Precedence: bulk X-list: linux-dvb Hi list! Which DVB-S is recommended for the vdr system? Because of an old cpu, i can't use a "budget card" - maybe as a second one only for recording. This seems to be the "original" V1.3: http://cgi.ebay.de/aw-cgi/eBayISAPI.dll?ViewItem&item=2003502933 http://cgi.ebay.de/aw-cgi/eBayISAPI.dll?ViewItem&item=2004020007 This is the "new" one from Siemens-Fujitsu: http://www.pc-werksverkauf.de/shop/cgi-bin/artikel_anzeige.asp?ARTIKEL_NR=10005&SESSION=091760181105F862016B Does anybody know something about it? Manufacturer "FSC"? Is it support by vdr? In de.rec.tv.technik was a thread about the new Hauppauge "Nexus" (Rev. 2.1), which seems to contain the same connectivity like the 1.3 an some other goodies. What about this one? -Andreas -- Diese Mitteilung wurde auf einer Anlage zur maschinellen Datenverarbeitung erstellt und ist auch ohne Unterschrift gültig. -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Tue Feb 19 13:14:16 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 9759 invoked by uid 0); 19 Feb 2002 13:14:16 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 19 Feb 2002 13:14:16 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dA5V-0000Hj-00; Tue, 19 Feb 2002 14:13:41 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 19 Feb 2002 14:10:43 +0100 (CET) Received: from mail.epost.de ([64.39.38.76]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dA2d-0008PP-00 for ; Tue, 19 Feb 2002 14:10:43 +0100 Received: from roman (217.159.40.55) by mail.epost.de (5.5.052) (authenticated as Roman.Schmidmeir@epost.de) id 3C6B20EC000F89CF for linux-dvb@linuxtv.org; Tue, 19 Feb 2002 14:10:16 +0100 From: "Roman Schmidmeir" To: Subject: [linux-dvb] Re: Software you might find useful Date: Tue, 19 Feb 2002 14:10:07 +0100 Message-ID: <000001c1b946$c5693420$4500a8c0@roman> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.2616 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal In-Reply-To: <02021912400800.02128@obtanium> X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: Roman.Schmidmeir@epost.de Precedence: bulk X-list: linux-dvb I have a Nova card too, and I use it with VDR for recording. I set timers either via vdradmin or the vdr menu (debug_osd=1) CU, Roman -----Original Message----- From: linux-dvb-bounce@linuxtv.org [mailto:linux-dvb-bounce@linuxtv.org] On Behalf Of Jasper Taylor Sent: Dienstag, 19. Februar 2002 13:40 To: linux-dvb@linuxtv.org Subject: [linux-dvb] Software you might find useful Then I wanted to do unattended recording to my hard disk. I can't use VDR because I don't have a card with a hardware MPEG decoder, so I wrote an application in TclTk enabling me to set recording times from a simple GUI. -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Tue Feb 19 13:20:56 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 14068 invoked by uid 0); 19 Feb 2002 13:20:56 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 19 Feb 2002 13:20:56 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dABy-0000wy-00; Tue, 19 Feb 2002 14:20:22 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 19 Feb 2002 14:17:18 +0100 (CET) Received: from mail.icem.de ([194.175.115.14] helo=bitwall.icem.de) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dA8z-0000Z3-00 for ; Tue, 19 Feb 2002 14:17:17 +0100 Received: from willina.icem.ptc.com ([132.253.166.93]) by bitwall.icem.de (8.12.1/8.12.1/Debian -5) with ESMTP id g1JDHHWU024901 for ; Tue, 19 Feb 2002 14:17:17 +0100 Received: from wald.hnv.icem.de ([158.225.25.1]) by willina.icem.ptc.com (8.12.1/8.12.1/Debian -2) with ESMTP id g1JDEnKs023769; Tue, 19 Feb 2002 14:14:49 +0100 Received: from icem.de (wald.hnv.icem.de [158.225.25.1]) by wald.hnv.icem.de (SGI-8.9.3/8.9.3) with ESMTP id OAA97293; Tue, 19 Feb 2002 14:17:09 +0100 (MET) Sender: Carsten.Koch@icem.de Message-ID: <3C725055.CA28FCB5@icem.de> Date: Tue, 19 Feb 2002 14:17:09 +0100 From: Carsten Koch Organization: ICEM Technologies GmbH X-Mailer: Mozilla 4.79C-SGI [en] (X11; U; IRIX 6.5 IP32) X-Accept-Language: de, en MIME-Version: 1.0 To: linux-dvb@linuxtv.org, vdr@icem.de Subject: [linux-dvb] Re: Software you might find useful References: <000001c1b946$c5693420$4500a8c0@roman> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Virus-Scanned: by AMaViS-perl11-milter (http://amavis.org/) X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: Carsten.Koch@icem.de Precedence: bulk X-list: linux-dvb Roman Schmidmeir wrote: > > I have a Nova card too, and I use it with VDR for recording. I set > timers either via vdradmin or the vdr menu (debug_osd=1) How does that work? Last I heard was that vdr requires at least one full DVB-S card to even start up. Carsten. -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From vdr-bounce@linuxtv.org Tue Feb 19 13:22:35 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 14090 invoked by uid 0); 19 Feb 2002 13:22:35 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 19 Feb 2002 13:22:35 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dADR-00014H-00; Tue, 19 Feb 2002 14:21:53 +0100 Received: with LISTAR (v0.129a; list vdr); Tue, 19 Feb 2002 14:21:44 +0100 (CET) Received: from ns.suse.de ([213.95.15.193] helo=Cantor.suse.de) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dADI-00011t-00; Tue, 19 Feb 2002 14:21:44 +0100 Received: from Hermes.suse.de (Hermes.suse.de [213.95.15.136]) by Cantor.suse.de (Postfix) with ESMTP id CFD591EB48; Tue, 19 Feb 2002 14:19:02 +0100 (MET) Date: Tue, 19 Feb 2002 14:19:02 +0100 From: "Dr. Werner Fink" To: vdr@linuxtv.org Cc: linux-dvb@linuxtv.org Subject: [vdr] Re: AC3 over DVB-s is possible - Part2 Message-ID: <20020219141902.A3227@boole.suse.de> References: <3C722548.468478B7@iis.fhg.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3C722548.468478B7@iis.fhg.de>; from fie@iis.fhg.de on Tue, Feb 19, 2002 at 11:13:28AM +0100 Organization: SuSE GmbH X-listar-version: Listar v0.129a Sender: vdr-bounce@linuxtv.org Errors-to: vdr-bounce@linuxtv.org X-original-sender: werner@suse.de Precedence: bulk Reply-to: vdr@linuxtv.org X-list: vdr On Tue, Feb 19, 2002 at 11:13:28AM +0100, Wolfgang Fiesel wrote: > Hello, > > as I promised last week, > now AC-3 over Digital Output (SPDIF) for DVB-S is reality (recordings > and DVD playback). > Of course if the recordings doesn't include any AC-3 data the SDPIF > output will be operate like before (raw PCM). > I'm using DVB-S version 2.1 (Hauppage) Fine ... the only question I've: Why the DVB developers have said that this wouldn't work. This because I've supposed this a half year ago at the linux-dvb@linuxtv.org list. > It's time to throw away the soundcard and forget the -a switch. > Nevertheless I modified the code very carefully and minimized the > patch effort. Therefore all previous AC-3 playmodes (-a switch) should > also operate like before. > > How does it work ? > The secret is the IEC 61937 paper which describes the wrapping of AC-3, > MP3, DTS, ... into raw 16 bit PCM data. Finally the LPCM > transport feature of the DVB driver was the key to realise it. This is exactly how ac3dec with -C/-P and ac3play it do. > > The patch is related to Klaus latest update version (vdr-0.99) to get a > chance > to be integrated if the test phase should be successfully. Since two > days I've check it by myself with different AC3 recordings and DVD's. Up Hmmm ... please have a look on send_ipack() in driver/dvb_filter.c of the DVB driver 0.9.4. Maybe it is possible to do the same IEC 61937 stuff directly in the DVB driver. For replay AND normal TV viewing. AFAIS in send_ipack() the mpeg stream will be scanned if p->repack_subids is true (by default it is set to false at init_ipack()). Maybe the wrapping of AC-3 into raw 16 bit linear PCM could be done at send_ipack() and the resulting PCM stream forwarded to SDPIF output as a replacement of the MPEG decoded PCM stream. Werner From linux-dvb-bounce@linuxtv.org Tue Feb 19 13:25:26 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 14397 invoked by uid 0); 19 Feb 2002 13:25:25 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 19 Feb 2002 13:25:25 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dAGH-0001Zv-00; Tue, 19 Feb 2002 14:24:49 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 19 Feb 2002 14:21:53 +0100 (CET) Received: from ns.suse.de ([213.95.15.193] helo=Cantor.suse.de) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dADI-00011t-00; Tue, 19 Feb 2002 14:21:44 +0100 Received: from Hermes.suse.de (Hermes.suse.de [213.95.15.136]) by Cantor.suse.de (Postfix) with ESMTP id CFD591EB48; Tue, 19 Feb 2002 14:19:02 +0100 (MET) Date: Tue, 19 Feb 2002 14:19:02 +0100 From: "Dr. Werner Fink" To: vdr@linuxtv.org Cc: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: [vdr] AC3 over DVB-s is possible - Part2 Message-ID: <20020219141902.A3227@boole.suse.de> References: <3C722548.468478B7@iis.fhg.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3C722548.468478B7@iis.fhg.de>; from fie@iis.fhg.de on Tue, Feb 19, 2002 at 11:13:28AM +0100 Organization: SuSE GmbH X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: werner@suse.de Precedence: bulk X-list: linux-dvb On Tue, Feb 19, 2002 at 11:13:28AM +0100, Wolfgang Fiesel wrote: > Hello, > > as I promised last week, > now AC-3 over Digital Output (SPDIF) for DVB-S is reality (recordings > and DVD playback). > Of course if the recordings doesn't include any AC-3 data the SDPIF > output will be operate like before (raw PCM). > I'm using DVB-S version 2.1 (Hauppage) Fine ... the only question I've: Why the DVB developers have said that this wouldn't work. This because I've supposed this a half year ago at the linux-dvb@linuxtv.org list. > It's time to throw away the soundcard and forget the -a switch. > Nevertheless I modified the code very carefully and minimized the > patch effort. Therefore all previous AC-3 playmodes (-a switch) should > also operate like before. > > How does it work ? > The secret is the IEC 61937 paper which describes the wrapping of AC-3, > MP3, DTS, ... into raw 16 bit PCM data. Finally the LPCM > transport feature of the DVB driver was the key to realise it. This is exactly how ac3dec with -C/-P and ac3play it do. > > The patch is related to Klaus latest update version (vdr-0.99) to get a > chance > to be integrated if the test phase should be successfully. Since two > days I've check it by myself with different AC3 recordings and DVD's. Up Hmmm ... please have a look on send_ipack() in driver/dvb_filter.c of the DVB driver 0.9.4. Maybe it is possible to do the same IEC 61937 stuff directly in the DVB driver. For replay AND normal TV viewing. AFAIS in send_ipack() the mpeg stream will be scanned if p->repack_subids is true (by default it is set to false at init_ipack()). Maybe the wrapping of AC-3 into raw 16 bit linear PCM could be done at send_ipack() and the resulting PCM stream forwarded to SDPIF output as a replacement of the MPEG decoded PCM stream. Werner -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Tue Feb 19 13:44:08 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 19374 invoked by uid 0); 19 Feb 2002 13:44:07 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 19 Feb 2002 13:44:07 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dAYI-0003yN-00; Tue, 19 Feb 2002 14:43:26 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 19 Feb 2002 14:39:43 +0100 (CET) Received: from mailout07.sul.t-online.com ([194.25.134.83]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dAUh-0003YC-00 for ; Tue, 19 Feb 2002 14:39:43 +0100 Received: from fwd01.sul.t-online.de by mailout07.sul.t-online.com with smtp id 16dAJ5-0008B4-03; Tue, 19 Feb 2002 14:27:43 +0100 Received: from diadem.milky.way (04335931990-0001@[62.155.252.105]) by fwd01.sul.t-online.com with esmtp id 16dAJ0-1rqGPYC; Tue, 19 Feb 2002 14:27:38 +0100 Received: from localhost (crest@localhost) by diadem.milky.way (8.9.3/8.9.3) with ESMTP id OAA02214 for ; Tue, 19 Feb 2002 14:23:16 +0100 Date: Tue, 19 Feb 2002 14:23:16 +0100 (CET) From: rolf.siebrecht@t-online.de (Rolf Siebrecht) To: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: driver 0.9.4, network activator and OpenSky In-Reply-To: <3C72106F.2C9E1DA5@pogled.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-Sender: 04335931990-0001@t-dialin.net X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: rolf.siebrecht@t-online.de Precedence: bulk X-list: linux-dvb Hi! On Tue, 19 Feb 2002, Milan Kecman wrote: > I had /dev/video as directory, so dvbd didn't start because ot that. > > Now it starts, first line sais sync 64 or 96, and after that any other output is sync=0, and > ping to EON proxy does not work. Then there is apparently no signal at the tuned frequency. > After I stop dvbd, i cant do modprobe -r dvb, get the message devise or resource is busy. >From what module? dvb.o itself? After ifconfig dvb0 x.y.z.t a ifconfig dvb0 down must follow before dvb.o can be unloaded. > dvbd puts the following in the logfile: > > Feb 19 09:25:43 proxy dvbd[1492]: reading config > Feb 19 09:25:43 proxy dvbd[1492]: IP(net) for filter_0 is x.y.z.w/255.255. > 255.255 > Feb 19 09:25:43 proxy dvbd[1492]: activating That part seems to be o.k. But without signal -> no filtering. > This part is working, but I've set in /etc/dvbd.conf > v4l_ifname /dev/video0 > is the video0 right device? Yes, if you have no other V4L devices (Bt8x8 TV cards, Webcams,...) whose drivers were loaded before. > After I do modprobe dvb I hear on speakers sound from a channel No. 3. > After dvbd there is no sound. Of course. dvbd changes transponder/frequency to that one that is specified in the config file, or the default one. Look at "dvbd -n". > Where should I look further? Tune dvbd to transponders from where you get perfect TV images, and watch "sync" and "vber" parameters there. Bye, Rolf -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Tue Feb 19 14:00:01 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 24613 invoked by uid 0); 19 Feb 2002 14:00:01 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 19 Feb 2002 14:00:01 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dAnm-0005Hq-00; Tue, 19 Feb 2002 14:59:26 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 19 Feb 2002 14:57:39 +0100 (CET) Received: from mail.epost.de ([64.39.38.70]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dAm3-0004yk-00 for ; Tue, 19 Feb 2002 14:57:39 +0100 Received: from roman (217.159.40.55) by mail.epost.de (5.5.052) (authenticated as Roman.Schmidmeir@epost.de) id 3C6B1E3900022A2D for linux-dvb@linuxtv.org; Tue, 19 Feb 2002 14:57:00 +0100 From: "Roman Schmidmeir" To: Subject: [linux-dvb] Re: Software you might find useful Date: Tue, 19 Feb 2002 14:57:02 +0100 Message-ID: <000001c1b94d$53c82310$4500a8c0@roman> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.2616 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal In-Reply-To: <3C725055.CA28FCB5@icem.de> X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: Roman.Schmidmeir@epost.de Precedence: bulk X-list: linux-dvb I guess the key is the Debug_osd=1 make parameter. It works simply perfect now! -----Original Message----- From: Carsten.Koch@icem.de [mailto:Carsten.Koch@icem.de] Sent: Dienstag, 19. Februar 2002 14:17 To: linux-dvb@linuxtv.org; vdr@icem.de Subject: [linux-dvb] Re: Software you might find useful Roman Schmidmeir wrote: > > I have a Nova card too, and I use it with VDR for recording. I set > timers either via vdradmin or the vdr menu (debug_osd=1) How does that work? Last I heard was that vdr requires at least one full DVB-S card to even start up. Carsten. -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Tue Feb 19 14:30:20 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 4265 invoked by uid 0); 19 Feb 2002 14:30:19 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 19 Feb 2002 14:30:19 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dBH3-0008BU-00; Tue, 19 Feb 2002 15:29:41 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 19 Feb 2002 15:27:25 +0100 (CET) Received: from ulima.unil.ch ([130.223.144.143]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dBEr-0007r9-00 for ; Tue, 19 Feb 2002 15:27:25 +0100 Received: by ulima.unil.ch (Postfix, from userid 500) id DCA3C5CAF7; Tue, 19 Feb 2002 15:27:24 +0100 (CET) Date: Tue, 19 Feb 2002 15:27:24 +0100 From: Gregoire Favre To: linux-dvb@linuxtv.org Subject: [linux-dvb] dvbdev.c in CVS is troncated... Message-ID: <20020219142724.GB12661@ulima.unil.ch> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit User-Agent: Mutt/1.3.27i X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: greg@ulima.unil.ch Precedence: bulk X-list: linux-dvb Hello, as I wanted to try 2.4.18-rc2 I just checked the CVS and tried to compil it, with some problems... I took dvbdev.c from an older revision, and changed saa7146_defs.h: --- saa7146_defs.h Wed Feb 21 18:44:03 2001 +++ ../../DVB-2002-02-18/driver/saa7146_defs.h Mon Feb 18 16:58:09 2002 @@ -40,6 +40,7 @@ struct saa7146_mmap_struct { + struct vm_area_struct *vma; const char *adr; unsigned long size; }; As I don't have a DVB card here: I can't try it, I will do it tonight at home (the computer here is much faster: a super PIII@550... to compil...). But at least that way I got it compiled ;-)) Maybe I should also need to change : --- dvb_frontend.c 7 Feb 2002 16:31:42 -0000 1.6 +++ dvb_frontend.c 9 Feb 2002 02:50:40 -0000 @@ -27,6 +27,7 @@ #include #include #include +#include #ifdef MODULE MODULE_DESCRIPTION(""); @@ -136,7 +137,7 @@ int wp; struct timeval tv; - get_fast_time(&tv); + do_gettimeofday(&tv); ev->timestamp=tv.tv_sec; spin_lock(&events->eventlock); I have to try ;-) Grégoire ________________________________________________________________ http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Tue Feb 19 14:37:24 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 6413 invoked by uid 0); 19 Feb 2002 14:37:24 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 19 Feb 2002 14:37:24 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dBNg-0001JR-00; Tue, 19 Feb 2002 15:36:32 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 19 Feb 2002 15:34:36 +0100 (CET) Received: from scandd1.dresden.fhg.de ([192.102.167.4] helo=scandd1.fhg.de) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dBLo-0000o3-00; Tue, 19 Feb 2002 15:34:36 +0100 Received: from scandd1.fhg.de (localhost [127.0.0.1]) by scandd1.fhg.de (8.11.1/8.11.1) with ESMTP id g1JEY6J05243; Tue, 19 Feb 2002 15:34:06 +0100 (MET) Received: from iis.fhg.de (iis.iis.fhg.de [153.96.172.2]) by scandd1.fhg.de (8.11.1/8.11.1) with ESMTP id g1JEY5x05236; Tue, 19 Feb 2002 15:34:05 +0100 (MET) Received: by iis.fhg.de with ESMTP; Tue, 19 Feb 2002 15:34:04 +0100 (MET) from sunserv02.iis.fhg.de Received: from iis.fhg.de by sunserv02.iis.fhg.de (8.8.8+Sun/SMI-SVR4) id PAA22778; Tue, 19 Feb 2002 15:34:03 +0100 (MET) Message-ID: <3C7262B6.4F45D42A@iis.fhg.de> Date: Tue, 19 Feb 2002 15:35:34 +0100 From: Wolfgang Fiesel X-Mailer: Mozilla 4.79 [en] (WinNT; U) X-Accept-Language: en MIME-Version: 1.0 To: "Dr. Werner Fink" CC: vdr@linuxtv.org, linux-dvb@linuxtv.org Subject: [linux-dvb] Re: [vdr] AC3 over DVB-s is possible - Part2 References: <3C722548.468478B7@iis.fhg.de> <20020219141902.A3227@boole.suse.de> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: fie@iis.fhg.de Precedence: bulk X-list: linux-dvb "Dr. Werner Fink" wrote: > On Tue, Feb 19, 2002 at 11:13:28AM +0100, Wolfgang Fiesel wrote: > > Hello, > > > > as I promised last week, > > now AC-3 over Digital Output (SPDIF) for DVB-S is reality (recordings > > and DVD playback). > > Of course if the recordings doesn't include any AC-3 data the SDPIF > > output will be operate like before (raw PCM). > > I'm using DVB-S version 2.1 (Hauppage) > > Fine ... the only question I've: Why the DVB developers have > said that this wouldn't work. This because I've supposed this > a half year ago at the linux-dvb@linuxtv.org list. > I think the main problem was here, it need time and money. > > > It's time to throw away the soundcard and forget the -a switch. > > Nevertheless I modified the code very carefully and minimized the > > patch effort. Therefore all previous AC-3 playmodes (-a switch) should > > also operate like before. > > > > How does it work ? > > The secret is the IEC 61937 paper which describes the wrapping of AC-3, > > MP3, DTS, ... into raw 16 bit PCM data. Finally the LPCM > > transport feature of the DVB driver was the key to realise it. > > This is exactly how ac3dec with -C/-P and ac3play it do. > > > > > The patch is related to Klaus latest update version (vdr-0.99) to get a > > chance > > to be integrated if the test phase should be successfully. Since two > > days I've check it by myself with different AC3 recordings and DVD's. Up > > Hmmm ... please have a look on send_ipack() in driver/dvb_filter.c > of the DVB driver 0.9.4. Maybe it is possible to do the same > IEC 61937 stuff directly in the DVB driver. For replay AND > normal TV viewing. AFAIS in send_ipack() the mpeg stream will be > scanned if p->repack_subids is true (by default it is set to > false at init_ipack()). Maybe the wrapping of AC-3 into raw 16 bit > linear PCM could be done at send_ipack() and the resulting PCM > stream forwarded to SDPIF output as a replacement of the MPEG > decoded PCM stream. > It sounds very interested to do it. As far as I see the situation of the data path inside the DVB card there are two different operation modes: 1. I call it direct mode = receive mode: Here the recieved PS will be filtered. The final Video/Audio stream will be deliverd directly to the MPEG-2 decoder (Texas Instruments). The audio output is at first available in digital shape --> direct output of SPDIF and will be directly converted to analog output. In this operation mode the DVB card is complete independent from any PC bridge activity. I think there also no driver activity anymore (after initialisation phase). 2. I call it memory mode = playback mode: Here the PC store it's own PES packets directly into a shared memory location on the DVB card. It seems that our wonderful LPCM feature is only possible in this operation mode because it is not defined in the MPEG-2 system standard. (I'm right ?). In this mode the driver has to do a lot of things (move the PC data into the right memory location, check data, configure some HW). As I understand previous answers from the developers we can't use both operation modes AT THE SAME TIME. If we would like to have AC-3 during TV viewing we have to modify the 1. mode The only programmable part in the DVB card is the ARM processor who is responsible for demultiplexing the PS data (right?). But how can we (ARM) bypass the TI decoder to access directly the digital output ? I believe here is the critical point. This solution is probably impossible. To reveive the AC-3 packet we have to switch into the receive mode (1) and at the same time the driver has to write back the wrapped AC-3 stream by using the playback mode (2). But nevertheless I'll try to understand the driver philosophy and the background of the DVB card data flow more in detail. Wolfi -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From vdr-bounce@linuxtv.org Tue Feb 19 14:37:29 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 6419 invoked by uid 0); 19 Feb 2002 14:37:28 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 19 Feb 2002 14:37:28 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dBNr-0001O1-00; Tue, 19 Feb 2002 15:36:43 +0100 Received: with LISTAR (v0.129a; list vdr); Tue, 19 Feb 2002 15:36:32 +0100 (CET) Received: from scandd1.dresden.fhg.de ([192.102.167.4] helo=scandd1.fhg.de) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dBLo-0000o3-00; Tue, 19 Feb 2002 15:34:36 +0100 Received: from scandd1.fhg.de (localhost [127.0.0.1]) by scandd1.fhg.de (8.11.1/8.11.1) with ESMTP id g1JEY6J05243; Tue, 19 Feb 2002 15:34:06 +0100 (MET) Received: from iis.fhg.de (iis.iis.fhg.de [153.96.172.2]) by scandd1.fhg.de (8.11.1/8.11.1) with ESMTP id g1JEY5x05236; Tue, 19 Feb 2002 15:34:05 +0100 (MET) Received: by iis.fhg.de with ESMTP; Tue, 19 Feb 2002 15:34:04 +0100 (MET) from sunserv02.iis.fhg.de Received: from iis.fhg.de by sunserv02.iis.fhg.de (8.8.8+Sun/SMI-SVR4) id PAA22778; Tue, 19 Feb 2002 15:34:03 +0100 (MET) Message-ID: <3C7262B6.4F45D42A@iis.fhg.de> Date: Tue, 19 Feb 2002 15:35:34 +0100 From: Wolfgang Fiesel X-Mailer: Mozilla 4.79 [en] (WinNT; U) X-Accept-Language: en MIME-Version: 1.0 To: "Dr. Werner Fink" CC: vdr@linuxtv.org, linux-dvb@linuxtv.org Subject: [vdr] Re: [linux-dvb] Re: AC3 over DVB-s is possible - Part2 References: <3C722548.468478B7@iis.fhg.de> <20020219141902.A3227@boole.suse.de> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-listar-version: Listar v0.129a Sender: vdr-bounce@linuxtv.org Errors-to: vdr-bounce@linuxtv.org X-original-sender: fie@iis.fhg.de Precedence: bulk Reply-to: vdr@linuxtv.org X-list: vdr "Dr. Werner Fink" wrote: > On Tue, Feb 19, 2002 at 11:13:28AM +0100, Wolfgang Fiesel wrote: > > Hello, > > > > as I promised last week, > > now AC-3 over Digital Output (SPDIF) for DVB-S is reality (recordings > > and DVD playback). > > Of course if the recordings doesn't include any AC-3 data the SDPIF > > output will be operate like before (raw PCM). > > I'm using DVB-S version 2.1 (Hauppage) > > Fine ... the only question I've: Why the DVB developers have > said that this wouldn't work. This because I've supposed this > a half year ago at the linux-dvb@linuxtv.org list. > I think the main problem was here, it need time and money. > > > It's time to throw away the soundcard and forget the -a switch. > > Nevertheless I modified the code very carefully and minimized the > > patch effort. Therefore all previous AC-3 playmodes (-a switch) should > > also operate like before. > > > > How does it work ? > > The secret is the IEC 61937 paper which describes the wrapping of AC-3, > > MP3, DTS, ... into raw 16 bit PCM data. Finally the LPCM > > transport feature of the DVB driver was the key to realise it. > > This is exactly how ac3dec with -C/-P and ac3play it do. > > > > > The patch is related to Klaus latest update version (vdr-0.99) to get a > > chance > > to be integrated if the test phase should be successfully. Since two > > days I've check it by myself with different AC3 recordings and DVD's. Up > > Hmmm ... please have a look on send_ipack() in driver/dvb_filter.c > of the DVB driver 0.9.4. Maybe it is possible to do the same > IEC 61937 stuff directly in the DVB driver. For replay AND > normal TV viewing. AFAIS in send_ipack() the mpeg stream will be > scanned if p->repack_subids is true (by default it is set to > false at init_ipack()). Maybe the wrapping of AC-3 into raw 16 bit > linear PCM could be done at send_ipack() and the resulting PCM > stream forwarded to SDPIF output as a replacement of the MPEG > decoded PCM stream. > It sounds very interested to do it. As far as I see the situation of the data path inside the DVB card there are two different operation modes: 1. I call it direct mode = receive mode: Here the recieved PS will be filtered. The final Video/Audio stream will be deliverd directly to the MPEG-2 decoder (Texas Instruments). The audio output is at first available in digital shape --> direct output of SPDIF and will be directly converted to analog output. In this operation mode the DVB card is complete independent from any PC bridge activity. I think there also no driver activity anymore (after initialisation phase). 2. I call it memory mode = playback mode: Here the PC store it's own PES packets directly into a shared memory location on the DVB card. It seems that our wonderful LPCM feature is only possible in this operation mode because it is not defined in the MPEG-2 system standard. (I'm right ?). In this mode the driver has to do a lot of things (move the PC data into the right memory location, check data, configure some HW). As I understand previous answers from the developers we can't use both operation modes AT THE SAME TIME. If we would like to have AC-3 during TV viewing we have to modify the 1. mode The only programmable part in the DVB card is the ARM processor who is responsible for demultiplexing the PS data (right?). But how can we (ARM) bypass the TI decoder to access directly the digital output ? I believe here is the critical point. This solution is probably impossible. To reveive the AC-3 packet we have to switch into the receive mode (1) and at the same time the driver has to write back the wrapped AC-3 stream by using the playback mode (2). But nevertheless I'll try to understand the driver philosophy and the background of the DVB card data flow more in detail. Wolfi From linux-dvb-bounce@linuxtv.org Tue Feb 19 14:37:32 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 6425 invoked by uid 0); 19 Feb 2002 14:37:32 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 19 Feb 2002 14:37:32 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dBNr-0001Ny-00; Tue, 19 Feb 2002 15:36:43 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 19 Feb 2002 15:35:12 +0100 (CET) Received: from ulima.unil.ch ([130.223.144.143]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dBMN-0000yP-00 for ; Tue, 19 Feb 2002 15:35:11 +0100 Received: by ulima.unil.ch (Postfix, from userid 500) id 2F4385CAE5; Tue, 19 Feb 2002 15:35:11 +0100 (CET) Date: Tue, 19 Feb 2002 15:35:11 +0100 From: Gregoire Favre To: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: dvbdev.c in CVS is troncated... Message-ID: <20020219143511.GA17742@ulima.unil.ch> References: <20020219142724.GB12661@ulima.unil.ch> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <20020219142724.GB12661@ulima.unil.ch> User-Agent: Mutt/1.3.27i X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: greg@ulima.unil.ch Precedence: bulk X-list: linux-dvb On Tue, Feb 19, 2002 at 03:27:24PM +0100, Gregoire Favre wrote: > Maybe I should also need to change : > > --- dvb_frontend.c 7 Feb 2002 16:31:42 -0000 1.6 > +++ dvb_frontend.c 9 Feb 2002 02:50:40 -0000 Oups: I looked in wrong files: already applied :-((( Sorry, Grégoire ________________________________________________________________ http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Tue Feb 19 18:02:17 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 9722 invoked by uid 0); 19 Feb 2002 18:02:17 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 19 Feb 2002 18:02:17 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dEaF-0001sf-00; Tue, 19 Feb 2002 19:01:43 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 19 Feb 2002 18:58:39 +0100 (CET) Received: from smtp.teuto.net ([212.8.197.13] helo=midgard.bi.teuto.net) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dE7L-0007RL-00 for ; Tue, 19 Feb 2002 18:31:52 +0100 Received: from localhost (localhost.localdomain [127.0.0.1]) by midgard.bi.teuto.net (Postfix) with ESMTP id 34ECD7DD5 for ; Tue, 19 Feb 2002 18:29:16 +0100 (CET) Received: from softcell (detm-d9330217.pool.mediaWays.net [217.51.2.23]) by midgard.bi.teuto.net (Postfix) with SMTP id 854BB7DD1 for ; Tue, 19 Feb 2002 18:29:15 +0100 (CET) From: Ulrich Gierschner To: Subject: [linux-dvb] --- Strange Audio on SP/DIF Out ...--- Date: Tue, 19 Feb 2002 20:12:19 +0100 X-Mailer: KMail [version 1.1.99] Content-Type: text/plain; charset="iso-8859-1" MIME-Version: 1.0 Message-Id: <02021920121908.25870@softcell> Content-Transfer-Encoding: quoted-printable X-Approved-By: dirk@convergence.de X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: dirk@convergence.de Precedence: bulk X-list: linux-dvb Hi ! I just tried to activate the SP/DIF Out of the old 1.3 Hauppauge DVBs Ca= rd.=20 But connected to the SB Live SP/DIF in you only hear a strange floppy sou= nd=20 (like there is no sync'ed ...)=20 Is it not a standard SP/dif Signal ? =20 --=20 Bis denn, Ulrich -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Tue Feb 19 18:34:27 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 19629 invoked by uid 0); 19 Feb 2002 18:34:27 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 19 Feb 2002 18:34:27 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dF5J-0004yy-00; Tue, 19 Feb 2002 19:33:49 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 19 Feb 2002 19:31:48 +0100 (CET) Received: from olympus.home.ict.nl ([193.79.216.151]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dF3L-0004gP-00 for ; Tue, 19 Feb 2002 19:31:47 +0100 Received: from quasar (1Cust105.tnt15.rtm1.nl.uu.net [213.116.124.105]) by olympus.home.ict.nl (8.11.1/8.11.1) with SMTP id g1JJYu931813 for ; Tue, 19 Feb 2002 20:34:57 +0100 Message-ID: <005001c1b973$dc29f780$ef02a8c0@quasar> From: "Marc Hutten" To: "linux DVB" Subject: [linux-dvb] TDA8083 tuner Date: Tue, 19 Feb 2002 19:32:59 +0100 MIME-Version: 1.0 Content-type: text/plain X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: marc.hutten@home.ict.nl Precedence: bulk X-list: linux-dvb Hello, I have an TTDVB-S card wqith the TDA8083 tuner. Will this tuner be supported or does anybody know how I create the software myself. Thank Marc Hutten. -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Tue Feb 19 20:55:29 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 31376 invoked by uid 0); 19 Feb 2002 20:55:28 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 19 Feb 2002 20:55:28 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dHHP-0004N3-00; Tue, 19 Feb 2002 21:54:27 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 19 Feb 2002 21:52:53 +0100 (CET) Received: from web10104.mail.yahoo.com ([216.136.130.54]) by chambertin.convergence.de with smtp (Exim 3.33 #2 ) id 16dHFs-00049i-00 for ; Tue, 19 Feb 2002 21:52:52 +0100 Message-ID: <20020219205247.67079.qmail@web10104.mail.yahoo.com> Received: from [217.10.196.46] by web10104.mail.yahoo.com via HTTP; Tue, 19 Feb 2002 12:52:47 PST Date: Tue, 19 Feb 2002 12:52:47 -0800 (PST) From: flyer musculitz Subject: [linux-dvb] precompiled ntuxzap application on RH 7.2 To: linux-dvb@linuxtv.org In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: musculitz@yahoo.com Precedence: bulk X-list: linux-dvb I patched tuxzapps as it says in some mail on the mailing list - so it won't need gtk for compiling ntuxzap and autogen.sh worked ...then i copied ctk.h as it sais in the README file ...but still it won't make ----------------------------------- make all-recursive make[1]: Entering directory `/usr/local/src/DVB/apps/tuxzap' Making all in src make[2]: Entering directory `/usr/local/src/DVB/apps/tuxzap/src' c++ -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I/usr/local/include -I../../../libdvb -I../../../libdvb/include -I../../../libdvb/src -I../../../driver -I../include -I../../../ost/include -g -O2 -c ntuxzap.cc In file included from ntuxzap.cc:24: common.hh:55: syntax error before `*' common.hh:58: syntax error before `*' common.hh:60: syntax error before `*' ntuxzap.cc: In function `int del_ch (EObjectType, void *, void *, long unsigned int)': ntuxzap.cc:164: warning: no return statement in function returning non-void ntuxzap.cc: In function `int getList (CDKALPHALIST *, int)': ntuxzap.cc:288: warning: no return statement in function returning non-void make[2]: *** [ntuxzap.o] Error 1 make[2]: Leaving directory `/usr/local/src/DVB/apps/tuxzap/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/usr/local/src/DVB/apps/tuxzap' make: *** [all-recursive-am] Error 2 -------------------------------------------- i get this error with 0.9.2 drivers when i try to compile /apps/tuxzap/ so i ask if anybody could help me with a precompiled on his machine ntuxzap application my OS is Red Hat 7.2 running on 2.4.7 kernel and as i said 0.9.2 dvb drivers thank you __________________________________________________ Do You Yahoo!? Yahoo! Sports - Coverage of the 2002 Olympic Games http://sports.yahoo.com -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Tue Feb 19 20:55:35 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 31382 invoked by uid 0); 19 Feb 2002 20:55:35 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 19 Feb 2002 20:55:35 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dHHg-0004Sy-00; Tue, 19 Feb 2002 21:54:44 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 19 Feb 2002 21:54:20 +0100 (CET) Received: from mail.bieringer.de ([195.226.187.51] helo=titan.bieringer.de) by chambertin.convergence.de with smtp (Exim 3.33 #2 ) id 16dHHH-0004LF-00 for ; Tue, 19 Feb 2002 21:54:19 +0100 Received: (qmail 25838 invoked from network); 19 Feb 2002 20:54:18 -0000 Received: from pd950f6a4.dip.t-dialin.net (HELO ??) (217.80.246.164) by mail.bieringer.de with SMTP; 19 Feb 2002 20:54:18 -0000 Date: Tue, 19 Feb 2002 21:54:34 +0100 From: Peter Bieringer To: Maillist Linux DVB Subject: [linux-dvb] Re: module loading outside of src/driver dir: - solved, but... Message-ID: <23480000.1014152074@localhost> In-Reply-To: <14590000.1013882725@localhost> References: <14590000.1013882725@localhost> X-Mailer: Mulberry/2.2.0b2 (Linux/x86) X-Echelon: GRU NSA GCHQ CIA Pentagon nuclear war terror anthrax X-URL: http://www.bieringer.de/pb/ X-OS: Linux MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Content-Disposition: inline X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: pb@bieringer.de Precedence: bulk X-list: linux-dvb Hi again, --On Saturday, February 16, 2002 07:05:25 PM +0100 Peter Bieringer wrote: > Running a "modprobe siemens_dvb" on root's home directory, all > modules were loaded, but running tuxview didn't show a nice picture, > also if tuxview window was moved, the picture is still on original > location. > > Stopping tuxview, removing all modules, changing to the drivers > directory (where the same modules live) and running a > "modprobe siemens_dvb", all works fine afterwards using tuxview > > Can anyone explain this to me? I thought, it shouldindepended from a > directory, where "modprobe" is used. I solved this now by myself, but looking for a hint in INSTALL or README shows me nothing. Problem was, that the ARM files "Dpram" and "Boot" have to be located in specific directories, either "./arm_firm", "./" or "DVB_FIRM_PATH" where DVB_FIRM_PATH is defined as "/lib/DVB" After creating upper directory and copy both files into, the module loading step works well staying elsewhere in FS. mho: a hint in INSTALL or FAQ regarding this issue would be great... Peter -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Tue Feb 19 21:13:10 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 3726 invoked by uid 0); 19 Feb 2002 21:13:10 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 19 Feb 2002 21:13:10 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dHYw-0005yq-00; Tue, 19 Feb 2002 22:12:34 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 19 Feb 2002 22:11:39 +0100 (CET) Received: from ulima.unil.ch ([130.223.144.143]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dHY2-0005mI-00 for ; Tue, 19 Feb 2002 22:11:38 +0100 Received: by ulima.unil.ch (Postfix, from userid 500) id F24705CABD; Tue, 19 Feb 2002 22:11:37 +0100 (CET) Date: Tue, 19 Feb 2002 22:11:37 +0100 From: Gregoire Favre To: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: dvbdev.c in CVS is troncated... Message-ID: <20020219211137.GB26823@ulima.unil.ch> References: <20020219142724.GB12661@ulima.unil.ch> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <20020219142724.GB12661@ulima.unil.ch> User-Agent: Mutt/1.3.27i X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: greg@ulima.unil.ch Precedence: bulk X-list: linux-dvb Hello, as I was so much suprised to find a truncated file in the CVS, I done a fresh CVS update, and the file was then complete??? I have no idea what has arrived, I got the same with avifile CVS, but it was after the crash of the CVS server... So sorry for the post, but the current CVS didn't work under 2.4.18-rc2 for me, but the patched one yes ;-)) Thanks you very much, Grégoire ________________________________________________________________ http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Tue Feb 19 23:46:21 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 23739 invoked by uid 0); 19 Feb 2002 23:46:21 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 19 Feb 2002 23:46:21 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dJxA-0005mA-00; Wed, 20 Feb 2002 00:45:44 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 20 Feb 2002 00:43:45 +0100 (CET) Received: from imo-d05.mx.aol.com ([205.188.157.37]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dJvF-0005WJ-00 for ; Wed, 20 Feb 2002 00:43:45 +0100 Received: from Myrmika@aol.com by imo-d05.mx.aol.com (mail_out_v32.5.) id m.12c.cc0d740 (18252) for ; Tue, 19 Feb 2002 18:43:05 -0500 (EST) From: Myrmika@aol.com Message-ID: <12c.cc0d740.29a43d08@aol.com> Date: Tue, 19 Feb 2002 18:43:04 EST Subject: [linux-dvb] extra decryptring layers in rendering stream of dv card To: linux-dvb@linuxtv.org MIME-Version: 1.0 Content-type: text/plain X-Mailer: AOL 7.0 for Windows UK sub 52 X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: Myrmika@aol.com Precedence: bulk X-list: linux-dvb i've got a nova-t, and i'm wondering if anyone has yet managed to place a eurocrypt filter into dv card / dvb streams. it is possible to backwards engineer any of the uncopyrighted codes that are used by companies, and this is already done for windows. has anyone done this, from scratch or by importing the ready made windows codes? discovery the sci fi channel etc are with many connections. what would be simplest...a modification of the nova-t driver? -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 20 08:09:51 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 21672 invoked by uid 0); 20 Feb 2002 08:09:51 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 20 Feb 2002 08:09:51 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dRoR-0002gi-00; Wed, 20 Feb 2002 09:09:15 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 20 Feb 2002 09:06:30 +0100 (CET) Received: from [151.17.240.110] (helo=sardegna.mbigroup.it) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dRlk-0002QM-00 for ; Wed, 20 Feb 2002 09:06:28 +0100 Received: from sicilia.mbigroup.it (suez.mbigroup.it.240.17.151.in-addr.arpa [151.17.240.106] (may be forged)) by sardegna.mbigroup.it (8.11.0/8.8.7) with ESMTP id g1K85qF20236 for ; Wed, 20 Feb 2002 09:05:52 +0100 Received: from tin.it (malta.mbi.net [192.168.9.103]) by sicilia.mbigroup.it (8.11.2/8.8.7) with ESMTP id g1K85lt21013 for ; Wed, 20 Feb 2002 09:05:47 +0100 Message-ID: <3C7366EB.1090203@tin.it> Date: Wed, 20 Feb 2002 10:05:47 +0100 From: Attilio Vaccaro User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:0.9.4) Gecko/20011126 Netscape6/6.2.1 X-Accept-Language: en-us MIME-Version: 1.0 To: linux-dvb Subject: [linux-dvb] Multicast support and drivers rel. 0.9.x Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: vattila@tin.it Precedence: bulk X-list: linux-dvb Hi all, can anyone tell me if there is any way to get multicast traffic with driver 0.9.x (maybe using dvb_network_activator or other utilities)? My interest is mainly directed to the possibility of streaming multicast traffic over a LAN using latest drivers. I'm currently doing that using driver 0.8.2, dvbd and mrouted and TT DVBsat PCI adapter; I tried a TT Budget board for the same stuff, but I'm not able to make it work with driver 0.8.2, so I had to switch to driver 0.9.4 in order to get (at least) unicast traffic. I also have an additional question: does anyone know what is the maximum number (and bandwidth) of the PIDs that can be received using a DVB adapter? What I see is that if I set more than a couple of PIDs in the filters section of dvbd.conf I get no more data. I'm doing all these tests using OpenSky. Thanks, Attilio -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 20 08:29:37 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 26839 invoked by uid 0); 20 Feb 2002 08:29:37 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 20 Feb 2002 08:29:37 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dS7S-0003JE-00; Wed, 20 Feb 2002 09:28:54 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 20 Feb 2002 09:28:17 +0100 (CET) Received: from www2.pogled.net ([212.124.183.2] helo=mail.pogled.net) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dS6r-0003Ak-00 for ; Wed, 20 Feb 2002 09:28:17 +0100 Received: from pogled.net ([192.168.0.14]) by mail.pogled.net (Netscape Messaging Server 3.6) with ESMTP id 644 for ; Wed, 20 Feb 2002 09:30:07 +0100 Message-ID: <3C735E8E.EC2C5C86@pogled.net> Date: Wed, 20 Feb 2002 09:30:06 +0100 From: Milan Kecman Organization: POGLEDnet X-Mailer: Mozilla 4.6 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: Multicast support and drivers rel. 0.9.x References: <3C7366EB.1090203@tin.it> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: mkecman@pogled.net Precedence: bulk X-list: linux-dvb Hi, I am trying currently to get unicast working wit OpenSky, on 2.4.14 kernel and 0.9.4 drivers and TT-DVB-S card, but no luck. Whitch kernel do You use? After lookung to syslog, I saw three lunes that say setting mc filter and MAC addresses for EOL, Feb 20 09:24:02 proxy kernel: dvb_net: dvb_net_init_dev() Feb 20 09:24:08 proxy kernel: dvb0_0: filter_set Feb 20 09:24:08 proxy kernel: dvb_net: open Feb 20 09:24:08 proxy kernel: dvb0_0: set_multi Feb 20 09:24:08 proxy kernel: dvb0_0: set_multi Feb 20 09:24:08 proxy kernel: dvb0_0: set_mc_filter 01 00 5e 00 00 01 Feb 20 09:24:08 proxy kernel: dvb0_0: set_multi Feb 20 09:24:08 proxy kernel: dvb0_0: set_mc_filter 01 00 5e 00 00 01 Feb 20 09:24:08 proxy kernel: dvb0_0: set_mac Feb 20 09:24:08 proxy kernel: dvb0_0: filter_free Feb 20 09:24:08 proxy kernel: dvb0_0: filter_set but since in network_activator I dont se nothing, I guess that driver sets these. Best regards Milan Kecman Attilio Vaccaro wrote: > Hi all, > can anyone tell me if there is any way to get multicast traffic with > driver 0.9.x (maybe using dvb_network_activator or other utilities)? > > My interest is mainly directed to the possibility of streaming multicast > traffic over a LAN using latest drivers. > I'm currently doing that using driver 0.8.2, dvbd and mrouted and TT > DVBsat PCI adapter; I tried a TT Budget board for the same stuff, but > I'm not able to make it work with driver 0.8.2, so I had to switch to > driver 0.9.4 in order to get (at least) unicast traffic. > > I also have an additional question: does anyone know what is the maximum > number (and bandwidth) of the PIDs that can be received using a DVB adapter? > What I see is that if I set more than a couple of PIDs in the filters > section of dvbd.conf I get no more data. > > I'm doing all these tests using OpenSky. > > Thanks, > Attilio > > -- > Info: > To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. -- -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 20 08:32:42 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 30792 invoked by uid 0); 20 Feb 2002 08:32:42 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 20 Feb 2002 08:32:42 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dSAQ-0004MH-00; Wed, 20 Feb 2002 09:31:58 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 20 Feb 2002 09:31:33 +0100 (CET) Received: from tmhoyle.gotadsl.co.uk ([195.149.46.162] helo=mail.cvsnt.org) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dSA0-0004FK-00 for ; Wed, 20 Feb 2002 09:31:32 +0100 Received: from localhost (localhost [127.0.0.1]) by mail.cvsnt.org (Postfix) with ESMTP id D8724286CBE; Wed, 20 Feb 2002 08:31:31 +0000 (GMT) Mailbox-Line: From tmh@nothing-on.tv Wed Feb 20 08:31:30 2002 Received: from nothing-on.tv (spock.my.home [192.168.2.3]) by mail.cvsnt.org (Postfix) with ESMTP id 37ED3286C18; Wed, 20 Feb 2002 08:31:29 +0000 (GMT) Message-ID: <3C735F04.8080905@nothing-on.tv> Date: Wed, 20 Feb 2002 08:32:04 +0000 From: Tony Hoyle User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:0.9.8) Gecko/20020214 MIME-Version: 1.0 To: Myrmika@aol.com Cc: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: extra decryptring layers in rendering stream of dv card References: <12c.cc0d740.29a43d08@aol.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit X-Spam-Status: No, hits=-100.0 required=5.0 tests=A_FROM_IN_AUTO_WLIST version=2.1 X-Virus-Scanned: by AMaViS perl-11 X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: tmh@nothing-on.tv Precedence: bulk X-list: linux-dvb Myrmika@aol.com wrote: > i've got a nova-t, and i'm wondering if anyone has yet managed to place a > eurocrypt filter into dv card / dvb streams. it is possible to backwards > engineer any of the uncopyrighted codes that are used by companies, and this > is already done for windows. has anyone done this, from scratch or by > importing the ready made windows codes? discovery the sci fi channel etc are > with many connections. > what would be simplest...a modification of the nova-t driver? (FYI: They're tetchy on this list about talking about such things, so best to reply off-list) First off... using the hacked codes/keys published on the web is likely to get you into big trouble. You shouldn't even be thinking of going this route. At the very least you'd need a smartcard reader and software to talk to it (I'm thinking of writing such a piece of software myself, since hardware CAMs weigh in at £200+ and I don't have that sort of money.. I just picked up a reader for £30. Interesting project, at least - it has lots of geek value.). However that only gets you half way. The DVB common scrambling algorithm is a complete unknown and not reproducible in software AFAIK. Without this info you won't be able to view encrypted channels. Expensive cards have the hardware that does this kind of thing automatically - you'd only have to implement the CAM. The Hauppauge is not designed for viewing encrypted channels and is unlikely to be coerced into doing so in the forseeable future. Tony -- "Wipe Info uses hexadecimal values to wipe files. This provides more security than wiping with decimal values." -- Norton SystemWorks 2002 Manual tmh@nothing-on.tv http://www.nothing-on.tv -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 20 08:40:46 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 31436 invoked by uid 0); 20 Feb 2002 08:40:46 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 20 Feb 2002 08:40:46 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dSIJ-0004og-00; Wed, 20 Feb 2002 09:40:07 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 20 Feb 2002 09:39:20 +0100 (CET) Received: from [10.1.1.69] (helo=rjkm.de ident=root) by chambertin.convergence.de with TLSv1:DES-CBC3-SHA:168 encrypted esmtp (Exim 3.33 #2 ) id 16dSHX-0004cD-00 for ; Wed, 20 Feb 2002 09:39:19 +0100 Received: (from rjkm@localhost) by rjkm.de (8.12.0.Beta19/8.12.0.Beta19) id g1K8dgDj001977; Wed, 20 Feb 2002 09:39:42 +0100 From: Ralph Metzler Message-ID: <15475.24780.989881.164535@draal.metzler> Date: Wed, 20 Feb 2002 09:39:40 +0100 To: "Marc Hutten" Cc: "linux DVB" Subject: [linux-dvb] TDA8083 tuner In-Reply-To: <005001c1b973$dc29f780$ef02a8c0@quasar> References: <005001c1b973$dc29f780$ef02a8c0@quasar> X-Mailer: VM 6.95 under 21.4 (patch 4) "Artificial Intelligence" XEmacs Lucid Mime-Version: 1.0 (generated by tm-edit 1.8) Content-Type: text/plain; charset=US-ASCII X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: rjkm@convergence.de Precedence: bulk X-list: linux-dvb Marc Hutten writes: > > Hello, > > I have an TTDVB-S card wqith the TDA8083 tuner. > Will this tuner be supported or does anybody know how I create the software myself. > No, this demodulator is not supported and will not be until we are able to get some kind of documentation. If you have documentation or have the time to reverse engineer the windoze driver you can of course write this driver yourself. Ralph -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 20 09:08:15 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 8390 invoked by uid 0); 20 Feb 2002 09:08:15 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 20 Feb 2002 09:08:15 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dSiv-000709-00; Wed, 20 Feb 2002 10:07:37 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 20 Feb 2002 10:05:13 +0100 (CET) Received: from [151.17.240.110] (helo=sardegna.mbigroup.it) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dSga-0006lg-00 for ; Wed, 20 Feb 2002 10:05:13 +0100 Received: from sicilia.mbigroup.it (suez.mbigroup.it.240.17.151.in-addr.arpa [151.17.240.106] (may be forged)) by sardegna.mbigroup.it (8.11.0/8.8.7) with ESMTP id g1K94fF20403 for ; Wed, 20 Feb 2002 10:04:41 +0100 Received: from tin.it (malta.mbi.net [192.168.9.103]) by sicilia.mbigroup.it (8.11.2/8.8.7) with ESMTP id g1K94at22037 for ; Wed, 20 Feb 2002 10:04:36 +0100 Message-ID: <3C7366A3.2060208@tin.it> Date: Wed, 20 Feb 2002 10:04:35 +0100 From: Attilio Vaccaro User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.1) Gecko/20010607 Netscape6/6.1b1 X-Accept-Language: en-us MIME-Version: 1.0 To: linuxdvb Subject: [linux-dvb] Re: Multicast support and drivers rel. 0.9.x References: <3C7366EB.1090203@tin.it> <3C735E8E.EC2C5C86@pogled.net> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: vattila@tin.it Precedence: bulk X-list: linux-dvb Milan Kecman wrote: >Hi, > >I am trying currently to get unicast working wit OpenSky, on 2.4.14 kernel and 0.9.4 drivers >and TT-DVB-S card, but no luck. Whitch kernel do You use? > I tried with kernel 2.4.9, 2.4.16 and 2.4.17 and for unicast traffic things seem to work fine, but no multicast... Regards, Attilio P.S.: sorry for the wrong date of my previous message -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 20 09:52:21 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 22954 invoked by uid 0); 20 Feb 2002 09:52:20 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 20 Feb 2002 09:52:20 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dTPY-0001jY-00; Wed, 20 Feb 2002 10:51:40 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 20 Feb 2002 10:48:56 +0100 (CET) Received: from [212.84.236.168] (helo=wipeout.convergence.de) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dTMu-0001Mp-00 for ; Wed, 20 Feb 2002 10:48:56 +0100 Received: from szymon by wipeout.convergence.de with local (Exim 3.34 #1 (Debian)) id 16dTMs-00020T-00; Wed, 20 Feb 2002 10:48:54 +0100 Date: Wed, 20 Feb 2002 10:48:54 +0100 From: Szymon Polom To: Myrmika@aol.com Cc: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: extra decryptring layers in rendering stream of dv card Message-ID: <20020220094854.GA7436@wipeout.convergence.de> Reply-To: Szymon Polom References: <12c.cc0d740.29a43d08@aol.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <12c.cc0d740.29a43d08@aol.com> User-Agent: Mutt/1.3.27i X-Operating-System: Linux wipeout 2.4.17 Sender: Szymon Polom X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: polom@convergence.de Precedence: bulk X-list: linux-dvb Hi, Quoting Myrmika@aol.com (Myrmika@aol.com): > i've got a nova-t, and i'm wondering if anyone has yet managed to place a > eurocrypt filter into dv card / dvb streams. it is possible to backwards > engineer any of the uncopyrighted codes that are used by companies, and this What kind of uncopyrighted code do you mean!? > is already done for windows. has anyone done this, from scratch or by > importing the ready made windows codes? discovery the sci fi channel etc are > with many connections. > what would be simplest...a modification of the nova-t driver? While the driver is GPL, convergence is still the copyright holder. We will never ever allow to import some illegal modifications. Bye... Tetchy Szymon. -- Szymon Polom, Project Manager Middleware GPG Key-ID: E6EA36F2 convergence integrated media GmbH http://www.convergence.de Rosenthaler Str. 51 fon: +49(0)30-72 62 06 68 D-10178 Berlin fax: +49(0)30-72 62 06 55 -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 20 09:53:22 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 22967 invoked by uid 0); 20 Feb 2002 09:53:22 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 20 Feb 2002 09:53:22 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dTQW-0001xU-00; Wed, 20 Feb 2002 10:52:40 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 20 Feb 2002 10:50:59 +0100 (CET) Received: from [10.1.1.38] (helo=mocm.de ident=root) by chambertin.convergence.de with TLSv1:DES-CBC3-SHA:168 encrypted esmtp (Exim 3.33 #2 ) id 16dTOs-0001eK-00 for ; Wed, 20 Feb 2002 10:50:58 +0100 Received: (from mocm@localhost) by mocm.de (8.12.0.Beta19/8.12.0.Beta19) id g1K9owZR002284; Wed, 20 Feb 2002 10:50:58 +0100 From: "Marcus O. C. Metzler" Message-ID: <15475.29058.246606.512281@titano.metzler> Date: Wed, 20 Feb 2002 10:50:58 +0100 (CET) To: Attilio Vaccaro Cc: linuxdvb Subject: [linux-dvb] Re: Multicast support and drivers rel. 0.9.x In-Reply-To: <3C7366A3.2060208@tin.it> References: <3C7366EB.1090203@tin.it> <3C735E8E.EC2C5C86@pogled.net> <3C7366A3.2060208@tin.it> X-Mailer: VM 6.75 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid Reply-To: Marcus Metzler X-Face: X!$Vwl\?,AW_[zm^ej\MLxN>q;R?C_sRZ*XE4V;BGT28Ewyd\:TS')W'G#Dgay8ci$*{lEd 02(Nk0OndG\752U>lozmb_R1poDm6mgHm_4.}bdS0hh.`xGUI.X2x_50T9.?_v~.,QI*$2:Q=HV@>F IP6%l~E:T|w,X[eC;|YD(A9X'sS"r$l]g<4CjAm4|f7o0>6zGwUPLinP0.d=E+_%?4>0A9'esEZ=9h $#b[g*/q/g'GVj-hDc,+V_]1.H^N,1Bju,>5FZn"B Mime-Version: 1.0 (generated by tm-edit 1.6) Content-Type: text/plain; charset=US-ASCII X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: mocm@convergence.de Precedence: bulk X-list: linux-dvb Attilio Vaccaro writes: > > > Milan Kecman wrote: > > >Hi, > > > >I am trying currently to get unicast working wit OpenSky, on 2.4.14 kernel and 0.9.4 drivers > >and TT-DVB-S card, but no luck. Whitch kernel do You use? > > > I tried with kernel 2.4.9, 2.4.16 and 2.4.17 and for unicast traffic > things seem to work fine, but no multicast... > > Regards, > Attilio > Get the latest CVS version. Multicast is now supported just like for other network devices. Of course, you have to write your own application for joining multicast groups etc. Marcus -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 20 10:01:48 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 27517 invoked by uid 0); 20 Feb 2002 10:01:48 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 20 Feb 2002 10:01:48 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dTYg-0003QJ-00; Wed, 20 Feb 2002 11:01:06 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 20 Feb 2002 10:59:16 +0100 (CET) Received: from www2.pogled.net ([212.124.183.2] helo=mail.pogled.net) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dTWq-0002PA-00 for ; Wed, 20 Feb 2002 10:59:15 +0100 Received: from pogled.net ([192.168.0.14]) by mail.pogled.net (Netscape Messaging Server 3.6) with ESMTP id 265; Wed, 20 Feb 2002 11:01:01 +0100 Message-ID: <3C7373DB.DAE15EC6@pogled.net> Date: Wed, 20 Feb 2002 11:00:59 +0100 From: Milan Kecman Organization: POGLEDnet X-Mailer: Mozilla 4.6 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: Attilio Vaccaro , linux-dvb@linuxtv.org Subject: [linux-dvb] Re: Multicast support and drivers rel. 0.9.x References: <3C7366EB.1090203@tin.it> <3C735E8E.EC2C5C86@pogled.net> <3C7366A3.2060208@tin.it> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: mkecman@pogled.net Precedence: bulk X-list: linux-dvb Hi, so the procedure that is working for You is: make insmod szap -n OpenSky channel number networkactivator 3003 and ifconfig dvb0_0 192.168.x.x ? Best regards Milan Kecman Attilio Vaccaro wrote: > Milan Kecman wrote: > > >Hi, > > > >I am trying currently to get unicast working wit OpenSky, on 2.4.14 kernel and 0.9.4 drivers > >and TT-DVB-S card, but no luck. Whitch kernel do You use? > > > I tried with kernel 2.4.9, 2.4.16 and 2.4.17 and for unicast traffic > things seem to work fine, but no multicast... > > Regards, > Attilio > > P.S.: sorry for the wrong date of my previous message > > -- > Info: > To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 20 10:20:38 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 32417 invoked by uid 0); 20 Feb 2002 10:20:38 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 20 Feb 2002 10:20:38 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dTqc-0004Yz-00; Wed, 20 Feb 2002 11:19:38 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 20 Feb 2002 11:17:29 +0100 (CET) Received: from imdns1.tin.it ([212.216.176.237] helo=fep41-svc.tin.it) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dToX-0004J6-00 for ; Wed, 20 Feb 2002 11:17:29 +0100 Received: from zio ([62.211.236.93]) by fep41-svc.tin.it (InterMail vM.4.01.03.13 201-229-121-113) with SMTP id <20020220101719.UCMJ28443.fep41-svc.tin.it@zio> for ; Wed, 20 Feb 2002 11:17:19 +0100 Date: Wed, 20 Feb 2002 12:20:52 +0100 From: aded To: linux-dvb@linuxtv.org Subject: [linux-dvb] saa7146_core.o problems... Message-Id: <20020220122052.6599caeb.aleohoh@libero.it> X-Mailer: Sylpheed version 0.7.0 (GTK+ 1.2.10; i686-pc-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: aleohoh@libero.it Precedence: bulk X-list: linux-dvb Hello, I'm trying to use Siemens drivers with Broadlogic 2030 PCI card (BTW, is it possible?). Unfortunately when I do "make insmod" in "driver" subdir, I see that all drivers are "insmod-ed" until saa7146_core.o. This is the output (without warning about "no license"): saa7146_core.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters Of course, starting now, I have a lot of problems for dependencies between modules (problems with saa7146_v4l.o, dvb.o, etc.). In my kernel configuration, I have set as "module" all the options for "Multimedia Devices" and "I2C support". Can someone help me? Thank you. PS: I apologize for my English :( -- saluti, aded -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 20 10:20:57 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 32699 invoked by uid 0); 20 Feb 2002 10:20:57 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 20 Feb 2002 10:20:57 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dTqz-0004kG-00; Wed, 20 Feb 2002 11:20:01 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 20 Feb 2002 11:18:18 +0100 (CET) Received: from [151.17.240.110] (helo=sardegna.mbigroup.it) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dTpJ-0004Jd-00 for ; Wed, 20 Feb 2002 11:18:17 +0100 Received: from sicilia.mbigroup.it (suez.mbigroup.it.240.17.151.in-addr.arpa [151.17.240.106] (may be forged)) by sardegna.mbigroup.it (8.11.0/8.8.7) with ESMTP id g1KAHkF20663 for ; Wed, 20 Feb 2002 11:17:46 +0100 Received: from tin.it (malta.mbi.net [192.168.9.103]) by sicilia.mbigroup.it (8.11.2/8.8.7) with ESMTP id g1KAHft23004 for ; Wed, 20 Feb 2002 11:17:41 +0100 Message-ID: <3C7377C4.3070702@tin.it> Date: Wed, 20 Feb 2002 11:17:40 +0100 From: Attilio Vaccaro User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.1) Gecko/20010607 Netscape6/6.1b1 X-Accept-Language: en-us MIME-Version: 1.0 To: linuxdvb Subject: [linux-dvb] Re: Multicast support and drivers rel. 0.9.x References: <3C7366EB.1090203@tin.it> <3C735E8E.EC2C5C86@pogled.net> <3C7366A3.2060208@tin.it> <3C7373DB.DAE15EC6@pogled.net> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: vattila@tin.it Precedence: bulk X-list: linux-dvb Milan Kecman wrote: >Hi, > >so the procedure that is working for You is: > >make insmod >szap -n OpenSky channel number >networkactivator 3003 >and >ifconfig dvb0_0 192.168.x.x ? > The sequence that I use is similar to that one, but I run network activator before tuning the channel. Attilio -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 20 10:25:33 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 352 invoked by uid 0); 20 Feb 2002 10:25:33 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 20 Feb 2002 10:25:33 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dTvQ-0005I5-00; Wed, 20 Feb 2002 11:24:36 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 20 Feb 2002 11:22:59 +0100 (CET) Received: from [151.17.240.110] (helo=sardegna.mbigroup.it) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dTtq-00053v-00 for ; Wed, 20 Feb 2002 11:22:58 +0100 Received: from sicilia.mbigroup.it (suez.mbigroup.it.240.17.151.in-addr.arpa [151.17.240.106] (may be forged)) by sardegna.mbigroup.it (8.11.0/8.8.7) with ESMTP id g1KAMRF20690 for ; Wed, 20 Feb 2002 11:22:27 +0100 Received: from tin.it (malta.mbi.net [192.168.9.103]) by sicilia.mbigroup.it (8.11.2/8.8.7) with ESMTP id g1KAMMt23058 for ; Wed, 20 Feb 2002 11:22:22 +0100 Message-ID: <3C7378DD.8090800@tin.it> Date: Wed, 20 Feb 2002 11:22:21 +0100 From: Attilio Vaccaro User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.1) Gecko/20010607 Netscape6/6.1b1 X-Accept-Language: en-us MIME-Version: 1.0 To: linuxdvb Subject: [linux-dvb] Re: Multicast support and drivers rel. 0.9.x References: <3C7366EB.1090203@tin.it> <3C735E8E.EC2C5C86@pogled.net> <3C7366A3.2060208@tin.it> <15475.29058.246606.512281@titano.metzler> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: vattila@tin.it Precedence: bulk X-list: linux-dvb Marcus O. C. Metzler wrote: > >Get the latest CVS version. Multicast is now supported just like for >other network devices. Of course, you have to write your own >application for joining multicast groups etc. > Do you mean by that that with a tcpdump on dvb0_0, after tuning to the right transponder/PID I will be able to see multicast traffic through the DVB adapter? What about the possibility to get more PIDs at the same time (multicast + unicast)? I'll try ASAP. Thanks, Attilio -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 20 10:31:49 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 4938 invoked by uid 0); 20 Feb 2002 10:31:49 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 20 Feb 2002 10:31:49 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dU1j-0006qy-00; Wed, 20 Feb 2002 11:31:07 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 20 Feb 2002 11:29:27 +0100 (CET) Received: from [10.1.1.69] (helo=rjkm.de ident=root) by chambertin.convergence.de with TLSv1:DES-CBC3-SHA:168 encrypted esmtp (Exim 3.33 #2 ) id 16dU07-0005px-00 for ; Wed, 20 Feb 2002 11:29:27 +0100 Received: (from rjkm@localhost) by rjkm.de (8.12.0.Beta19/8.12.0.Beta19) id g1KATwaR002292; Wed, 20 Feb 2002 11:29:58 +0100 From: Ralph Metzler Message-ID: <15475.31398.236788.974523@draal.metzler> Date: Wed, 20 Feb 2002 11:29:58 +0100 To: aded Cc: linux-dvb@linuxtv.org Subject: [linux-dvb] saa7146_core.o problems... In-Reply-To: <20020220122052.6599caeb.aleohoh@libero.it> References: <20020220122052.6599caeb.aleohoh@libero.it> X-Mailer: VM 6.95 under 21.4 (patch 4) "Artificial Intelligence" XEmacs Lucid Mime-Version: 1.0 (generated by tm-edit 1.8) Content-Type: text/plain; charset=US-ASCII X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: rjkm@convergence.de Precedence: bulk X-list: linux-dvb aded writes: > I'm trying to use Siemens drivers with Broadlogic 2030 PCI card (BTW, is > it possible?). Unfortunately when I do "make insmod" in "driver" subdir, No, you cannot use the "Siemens" drivers for a "Broadlogic" card. AFAIK, there is no Linux driver for the Broadlogic cards. Please refer to our pages on www.linuxtv.org to see which cards are supported. Ralph -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 20 10:43:34 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 5721 invoked by uid 0); 20 Feb 2002 10:43:34 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 20 Feb 2002 10:43:34 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dUDA-0007fJ-00; Wed, 20 Feb 2002 11:42:56 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 20 Feb 2002 11:40:43 +0100 (CET) Received: from web20307.mail.yahoo.com ([216.136.226.88]) by chambertin.convergence.de with smtp (Exim 3.33 #2 ) id 16dUB0-0007Mn-00 for ; Wed, 20 Feb 2002 11:40:42 +0100 Message-ID: <20020220104040.87575.qmail@web20307.mail.yahoo.com> Received: from [193.95.113.27] by web20307.mail.yahoo.com via HTTP; Wed, 20 Feb 2002 02:40:40 PST Date: Wed, 20 Feb 2002 02:40:40 -0800 (PST) From: IES BEN HAMIDA Subject: [linux-dvb] Installing dvb card ??? To: linux-dvb@linuxtv.org MIME-Version: 1.0 Content-type: text/plain X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: iesbh2@yahoo.com Precedence: bulk X-list: linux-dvb Hi evry one, this is my first message, in fact I have some problem in installing dvb card, I know that I need to install i2c & videodev first of all, but I dont now how. Please can you help me step by step. I use mandrake 8.1, kernel 2.4.8. I'm waiting for any help. Thnaks in advance. IES BH --------------------------------- Do You Yahoo!? Yahoo! Sports - Coverage of the 2002 Olympic Games -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 20 13:23:39 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 26761 invoked by uid 0); 20 Feb 2002 13:23:39 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 20 Feb 2002 13:23:39 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dWi5-0000WU-00; Wed, 20 Feb 2002 14:23:01 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 20 Feb 2002 14:19:24 +0100 (CET) Received: from varis.cs.tut.fi ([130.230.4.42] helo=cs.tut.fi ident=root) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dWea-00005p-00 for ; Wed, 20 Feb 2002 14:19:24 +0100 Received: from rotwailer (rotwailer.dmi.tut.fi [130.230.50.27]) by cs.tut.fi (8.8.8/8.8.8) with SMTP id PAA26945 for ; Wed, 20 Feb 2002 15:19:23 +0200 (EET) Message-ID: <000c01c1ba64$ca8dc870$1b32e682@rotwailer> From: "Aurelian Pop" To: "LinuxTV" Subject: [linux-dvb] NOVA+encrypted channels... Date: Wed, 20 Feb 2002 15:17:39 -0800 MIME-Version: 1.0 Content-type: text/plain X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: puiu@cs.tut.fi Precedence: bulk X-list: linux-dvb Hi, Is there a way of reading the encrypted channels using Nova cards (DVBS and DVBT)? Note, that I'm only asking about "legal" ways (using CAMs) or something else... My problem is that on the NOVA cards there's no CAM socket... so then how can I do it? Aurelian -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 20 14:16:15 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 13722 invoked by uid 0); 20 Feb 2002 14:16:15 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 20 Feb 2002 14:16:15 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dXX1-0005Ol-00; Wed, 20 Feb 2002 15:15:39 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 20 Feb 2002 15:12:58 +0100 (CET) Received: from mailout07.sul.t-online.com ([194.25.134.83]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dXUQ-000534-00 for ; Wed, 20 Feb 2002 15:12:58 +0100 Received: from fwd11.sul.t-online.de by mailout07.sul.t-online.com with smtp id 16dXUQ-0006NM-04; Wed, 20 Feb 2002 15:12:58 +0100 Received: from diadem.milky.way (04335931990-0001@[217.1.39.14]) by fwd11.sul.t-online.com with esmtp id 16dXUH-2F5AgaC; Wed, 20 Feb 2002 15:12:49 +0100 Received: from localhost (crest@localhost) by diadem.milky.way (8.9.3/8.9.3) with ESMTP id PAA02167 for ; Wed, 20 Feb 2002 15:11:32 +0100 Date: Wed, 20 Feb 2002 15:11:32 +0100 (CET) From: rolf.siebrecht@t-online.de (Rolf Siebrecht) To: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: Installing dvb card ??? In-Reply-To: <20020220104040.87575.qmail@web20307.mail.yahoo.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-Sender: 04335931990-0001@t-dialin.net X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: rolf.siebrecht@t-online.de Precedence: bulk X-list: linux-dvb Hi! On Wed, 20 Feb 2002, IES BEN HAMIDA wrote: > this is my first message, in fact I have some problem in installing dvb > card, I know that I need to install i2c & videodev first of all, but I > dont now how. Please can you help me step by step. I use mandrake 8.1, > kernel 2.4.8. First type as root insmod i2c-core insmod videodev If it passes without errors or warnings the needed modules are already present. Maybe the modules are even already loaded - the better for you. Else learn about configuring and installing a new kernel including modules - and choose [m] I2C support [m] I2C /proc interface // <-- this is not urgently needed, // but IMHO a great help [m] Video For Linux while you are walking through `make [x|menu]config`. Then tell about your next problems... DVB related. Bye, Rolf -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 20 14:29:47 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 14442 invoked by uid 0); 20 Feb 2002 14:29:47 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 20 Feb 2002 14:29:47 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dXk5-0006RN-00; Wed, 20 Feb 2002 15:29:09 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 20 Feb 2002 15:26:56 +0100 (CET) Received: from anice-101-1-5-145.abo.wanadoo.fr ([193.252.185.145] helo=mxmlab.com) by chambertin.convergence.de with smtp (Exim 3.33 #2 ) id 16dXhv-00067s-00 for ; Wed, 20 Feb 2002 15:26:56 +0100 Received: (qmail 1928 invoked by uid 8); 20 Feb 2002 14:29:50 -0000 Received: from pc-00010.mxm (192.168.0.10, claiming to be "jeanclaude") by e-smith.mxm with SMTP id smtpdg9pYaz; Wed, 20 Feb 2002 09:29:49 EST Message-ID: <024601c1ba1b$2a2b5210$0a00a8c0@jeanclaude> From: "Jean-Claude Repetto" To: "LinuxTV" References: <000c01c1ba64$ca8dc870$1b32e682@rotwailer> Subject: [linux-dvb] Re: NOVA+encrypted channels... Date: Wed, 20 Feb 2002 15:30:37 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 X-AntiVirus: scanned for viruses by AMaViS 0.2.1 (http://amavis.org/) X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: jrepetto@francenet.fr Precedence: bulk X-list: linux-dvb ----- Original Message ----- From: "Aurelian Pop" To: "LinuxTV" Sent: Thursday, February 21, 2002 12:17 AM Subject: [linux-dvb] NOVA+encrypted channels... > > Hi, > > Is there a way of reading the encrypted channels using Nova cards (DVBS and DVBT)? > Note, that I'm only asking about "legal" ways (using CAMs) or something else... > My problem is that on the NOVA cards there's no CAM socket... so then how can I do it? > > Aurelian > > I think there is a legal way. Add a PCMCIA interface to your PC, plug a CAM, and write a PCMCIA driver using the pcmcia-cs package. You'll find all the documentation on the Common Interface at www.etsi.org . I think it shouldn't be very difficult. Jean-Claude -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 20 14:34:02 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 18683 invoked by uid 0); 20 Feb 2002 14:34:02 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 20 Feb 2002 14:34:02 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dXoB-0007oj-00; Wed, 20 Feb 2002 15:33:23 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 20 Feb 2002 15:31:27 +0100 (CET) Received: from raptor.micronas.com ([192.166.137.1]) by chambertin.convergence.de with smtp (Exim 3.33 #2 ) id 16dXmJ-0007WZ-00 for ; Wed, 20 Feb 2002 15:31:27 +0100 Received: from cachalot.micronas.com by raptor.micronas.com via smtpd (for chambertin.convergence.de [212.84.236.2]) with SMTP; 20 Feb 2002 14:31:27 UT Received: FROM EXCHANGE1.Micronas.com BY CACHALOT.Micronas.com ; Wed Feb 20 15:32:44 2002 +0100 Received: by exchange1.micronas.com with Internet Mail Service (5.5.2653.19) id ; Wed, 20 Feb 2002 15:32:43 +0100 Message-ID: <511F0D67B671D311935F0008C7F99DFB061F08D2@exchange1.micronas.com> From: Hakenes Rolf To: LinuxTV Subject: [linux-dvb] Re: NOVA+encrypted channels... Date: Wed, 20 Feb 2002 15:32:42 +0100 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: text/plain; charset="iso-8859-1" X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: Rolf.Hakenes@Micronas.com Precedence: bulk X-list: linux-dvb > > Hi, > > Is there a way of reading the encrypted channels using Nova cards (DVBS and DVBT)? > Note, that I'm only asking about "legal" ways (using CAMs) or something else... > My problem is that on the NOVA cards there's no CAM socket... > so then how can I do it? > No, it is not !!! The DVB descrambling algorithm is protected and without the permission of the DVB consortium you are not allowed to implement this algorithm (beside the fact, that they will not tell you how it works). Only semiconductor vendors which produce descrambler chips (like TI for DVB-s) are able to get this permission. The NOVA card does not include such a circuit !! This is completely independent from the crypting algorithms used do crypt the decryption-keys (IRDETO, SECA etc.). These are protected schemes as well, but you buy the right to use it when purchasing a CI-module. Regards, Rolf -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 20 14:43:22 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 19451 invoked by uid 0); 20 Feb 2002 14:43:21 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 20 Feb 2002 14:43:21 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dXx9-0000Ba-00; Wed, 20 Feb 2002 15:42:39 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 20 Feb 2002 15:40:53 +0100 (CET) Received: from [10.1.1.38] (helo=mocm.de ident=root) by chambertin.convergence.de with TLSv1:DES-CBC3-SHA:168 encrypted esmtp (Exim 3.33 #2 ) id 16dXvR-0008Kg-00 for ; Wed, 20 Feb 2002 15:40:53 +0100 Received: (from mocm@localhost) by mocm.de (8.12.0.Beta19/8.12.0.Beta19) id g1KEep1u003212; Wed, 20 Feb 2002 15:40:51 +0100 From: "Marcus O. C. Metzler" Message-ID: <15475.46451.380575.843985@titano.metzler> Date: Wed, 20 Feb 2002 15:40:51 +0100 (CET) To: "Jean-Claude Repetto" Cc: "LinuxTV" Subject: [linux-dvb] Re: NOVA+encrypted channels... In-Reply-To: <024601c1ba1b$2a2b5210$0a00a8c0@jeanclaude> References: <000c01c1ba64$ca8dc870$1b32e682@rotwailer> <024601c1ba1b$2a2b5210$0a00a8c0@jeanclaude> X-Mailer: VM 6.75 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid Reply-To: Marcus Metzler X-Face: X!$Vwl\?,AW_[zm^ej\MLxN>q;R?C_sRZ*XE4V;BGT28Ewyd\:TS')W'G#Dgay8ci$*{lEd 02(Nk0OndG\752U>lozmb_R1poDm6mgHm_4.}bdS0hh.`xGUI.X2x_50T9.?_v~.,QI*$2:Q=HV@>F IP6%l~E:T|w,X[eC;|YD(A9X'sS"r$l]g<4CjAm4|f7o0>6zGwUPLinP0.d=E+_%?4>0A9'esEZ=9h $#b[g*/q/g'GVj-hDc,+V_]1.H^N,1Bju,>5FZn"B Mime-Version: 1.0 (generated by tm-edit 1.6) Content-Type: text/plain; charset=US-ASCII X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: mocm@convergence.de Precedence: bulk X-list: linux-dvb Jean-Claude Repetto writes: > > ----- Original Message ----- > From: "Aurelian Pop" > To: "LinuxTV" > Sent: Thursday, February 21, 2002 12:17 AM > Subject: [linux-dvb] NOVA+encrypted channels... > > > > > > Hi, > > > > Is there a way of reading the encrypted channels using Nova cards (DVBS > and DVBT)? > > Note, that I'm only asking about "legal" ways (using CAMs) or something > else... > > My problem is that on the NOVA cards there's no CAM socket... so then how > can I do it? > > > > Aurelian > > > > > > I think there is a legal way. Add a PCMCIA interface to your PC, plug a CAM, > and write a PCMCIA driver using the pcmcia-cs package. You'll find all the > documentation on the Common Interface at www.etsi.org . > I think it shouldn't be very difficult. > The only problem is how to get the TS into the CAM and at a reasonable speed, preferably realtime. Although you can talk to the CAM via the PCMCIA interface and implement the CI layers, you just don't have the correct pin assignment for the TS io. You'll have to somehow trick your PCMCIA controller into transmitting the encrypted and receiving the unencrypted TS data. Marcus -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 20 17:03:36 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 2679 invoked by uid 0); 20 Feb 2002 17:03:36 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 20 Feb 2002 17:03:36 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16da8y-0002BC-00; Wed, 20 Feb 2002 18:03:00 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 20 Feb 2002 17:58:24 +0100 (CET) Received: from mta21-acc.tin.it ([212.216.176.74] helo=fep21-svc.tin.it) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16da4W-00010a-00 for ; Wed, 20 Feb 2002 17:58:24 +0100 Received: from zio ([62.211.236.82]) by fep21-svc.tin.it (InterMail vM.4.01.03.13 201-229-121-113) with SMTP id <20020220165748.WFTP12534.fep21-svc.tin.it@zio>; Wed, 20 Feb 2002 17:57:48 +0100 Date: Wed, 20 Feb 2002 19:00:52 +0100 From: aded To: Ralph Metzler Cc: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: saa7146_core.o problems... Message-Id: <20020220190052.59e23f85.aleohoh@libero.it> In-Reply-To: <15475.31398.236788.974523@draal.metzler> References: <20020220122052.6599caeb.aleohoh@libero.it> <15475.31398.236788.974523@draal.metzler> X-Mailer: Sylpheed version 0.7.0 (GTK+ 1.2.10; i686-pc-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: aleohoh@libero.it Precedence: bulk X-list: linux-dvb > > I'm trying to use Siemens drivers with Broadlogic 2030 PCI card > > (BTW, is it possible?). Unfortunately when I do "make insmod" in > > "driver" subdir, > No, you cannot use the "Siemens" drivers for a "Broadlogic" card. > AFAIK, there is no Linux driver for the Broadlogic cards. > Please refer to our pages on www.linuxtv.org to see which cards are > supported. > Ralph Hello Ralph, thank you for your reply. The last question: what about the external version of the Hauppauge, on USB port? Is it just the same, i.e. a good support? Thank you. -- Cordiali saluti, Alessandro "aded" -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 20 17:21:50 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 7771 invoked by uid 0); 20 Feb 2002 17:21:50 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 20 Feb 2002 17:21:50 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16daQ6-00031T-00; Wed, 20 Feb 2002 18:20:42 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 20 Feb 2002 18:17:31 +0100 (CET) Received: from 20-102.campusnet.ucl.ac.be ([130.104.20.102] helo=ayanami.246tNt.com) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16daN0-0002je-00 for ; Wed, 20 Feb 2002 18:17:31 +0100 Received: from 246tNt.com (246tNt-main.internal.ayanami.246tNt.com [10.0.0.246]) by ayanami.246tNt.com (Postfix) with ESMTP id 774AB10B5F for ; Wed, 20 Feb 2002 18:12:54 +0100 (CET) Sender: tnt@ayanami.246tNt.com Message-ID: <3C73DA90.8FA702EF@246tNt.com> Date: Wed, 20 Feb 2002 18:19:12 +0100 From: Munaut Sylvain X-Mailer: Mozilla 4.77 [en] (X11; U; Linux 2.4.16 i686) X-Accept-Language: en MIME-Version: 1.0 To: LinuxTV Subject: [linux-dvb] Infrared and CI Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: tnt@246tNt.com Precedence: bulk X-list: linux-dvb Hello I have a hauppauge wintvdvb. With it i have a IR receiver ( shipped withe the card and that is plugged on the Card ). And a CI interface with a CAM. When a don't plug in the CI into the card, the IR is working but when i plug the CI into the card, it doesn't work anymore .... What should i do ??? Tanx Munaut Sylvain -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 20 17:57:48 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 17949 invoked by uid 0); 20 Feb 2002 17:57:47 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 20 Feb 2002 17:57:47 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dazI-0005Jt-00; Wed, 20 Feb 2002 18:57:04 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 20 Feb 2002 18:52:15 +0100 (CET) Received: from relay1.soft.net ([164.164.128.17] helo=cyclops.soft.net) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16daub-0004ys-00 for ; Wed, 20 Feb 2002 18:52:14 +0100 Received: from Bhishma.Kshema.com (valmiki.kshema.com [164.164.59.2]) by cyclops.soft.net (Switch-2.0.1/Switch-2.0.1) with SMTP id g1L2xWm21430; Wed, 20 Feb 2002 21:59:34 -0500 (GMT) Received: from SMTP agent by mail gateway Wed, 20 Feb 2002 23:27:02 --5-30 Received: from kshema2 (KSHEMAUSA [192.168.1.50]) by Bhishma.Kshema.com with SMTP (Microsoft Exchange Internet Mail Service Version 5.5.2653.13) id 12QMGK44; Wed, 20 Feb 2002 23:24:09 +0530 Received: from SMTP agent by mail gateway Wed, 20 Feb 2002 12:48:25 -0500 Reply-To: From: "iqbal" To: "'Munaut Sylvain'" , "'LinuxTV'" Subject: [linux-dvb] Re: Infrared and CI Date: Wed, 20 Feb 2002 17:51:06 -0000 Message-ID: <001a01c1ba37$2c5d8aa0$8434aa88@cam.pace.co.uk> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 In-Reply-To: <3C73DA90.8FA702EF@246tNt.com> X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211 Importance: Normal X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: iqbal.s@kshema.com Precedence: bulk X-list: linux-dvb Hi, i am writing device drivers for set top box. Current i am involved in scart device which is in I2C. Since i am new to I2C.Do anybody tell me how do i write a driver for I2C-SCART. Please give some suggestions regards iqbal -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 20 20:23:01 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 2186 invoked by uid 0); 20 Feb 2002 20:23:00 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 20 Feb 2002 20:23:00 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16ddFu-0005bC-00; Wed, 20 Feb 2002 21:22:22 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 20 Feb 2002 21:17:51 +0100 (CET) Received: from mail.gmx.net ([213.165.64.20]) by chambertin.convergence.de with smtp (Exim 3.33 #2 ) id 16ddBU-00059x-00 for ; Wed, 20 Feb 2002 21:17:48 +0100 Received: (qmail 30399 invoked by uid 0); 20 Feb 2002 20:17:18 -0000 Received: from pd9e6e31a.dip0.t-ipconnect.de (HELO gmx.de) (217.230.227.26) by mail.gmx.net (mp004-rz3) with SMTP; 20 Feb 2002 20:17:18 -0000 Message-ID: <3C74047F.4FA7B0D7@gmx.de> Date: Wed, 20 Feb 2002 21:18:07 +0100 From: Joerg Riechardt X-Mailer: Mozilla 4.79 [en] (Win98; U) X-Accept-Language: de,en MIME-Version: 1.0 CC: LinuxTV Subject: [linux-dvb] Re: Infrared and CI References: <3C73DA90.8FA702EF@246tNt.com> Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: J.Riechardt@gmx.de Precedence: bulk X-list: linux-dvb Munaut Sylvain wrote: > . With it i have a IR receiver ( shipped > withe the card and that is plugged on the Card ). either > And a CI interface > with a CAM. or > When a don't plug in the CI into the card, the IR is working > but when i plug the CI into the card, it doesn't work anymore .... they don't work together, see also http://www.linuxdvb.tv/documentation/ir-j2.html > What > should i do ??? if you really want you could kill one connection Jörg -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 20 21:06:31 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 17989 invoked by uid 0); 20 Feb 2002 21:06:31 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 20 Feb 2002 21:06:31 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16ddvx-00008T-00; Wed, 20 Feb 2002 22:05:49 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 20 Feb 2002 22:02:34 +0100 (CET) Received: from mail.gmx.net ([213.165.64.20]) by chambertin.convergence.de with smtp (Exim 3.33 #2 ) id 16ddso-0008NY-00 for ; Wed, 20 Feb 2002 22:02:34 +0100 Received: (qmail 14762 invoked by uid 0); 20 Feb 2002 21:02:12 -0000 Received: from pd9e6e468.dip0.t-ipconnect.de (HELO gmx.de) (217.230.228.104) by mail.gmx.net (mp005-rz3) with SMTP; 20 Feb 2002 21:02:12 -0000 Message-ID: <3C740F07.19384CE7@gmx.de> Date: Wed, 20 Feb 2002 22:03:03 +0100 From: Joerg Riechardt X-Mailer: Mozilla 4.79 [en] (Win98; U) X-Accept-Language: de,en MIME-Version: 1.0 To: LinuxTV Subject: [linux-dvb] Re: Infrared and CI References: <3C73DA90.8FA702EF@246tNt.com> <3C74047F.4FA7B0D7@gmx.de> Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: J.Riechardt@gmx.de Precedence: bulk X-list: linux-dvb ..., but more easy would be, to plug in a IR receiver in the CAM or use the built in, if it has one, only. Jörg -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 20 21:29:02 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 24588 invoked by uid 0); 20 Feb 2002 21:29:02 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 20 Feb 2002 21:29:02 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16deHo-0000u4-00; Wed, 20 Feb 2002 22:28:24 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 20 Feb 2002 22:23:29 +0100 (CET) Received: from mail.epost.de ([64.39.38.72]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16deD2-0000bW-00 for ; Wed, 20 Feb 2002 22:23:29 +0100 Received: from Peter (62.245.149.3) by mail.epost.de (5.5.052) (authenticated as Peter.Schmidmeir@epost.de) id 3C6B20280002B748 for linux-dvb@linuxtv.org; Wed, 20 Feb 2002 22:22:13 +0100 Message-ID: <001801c1ba54$c4decec0$152ea8c0@Peter> From: "Peter Schmidmeir" To: Subject: [linux-dvb] Problems with insmod - Help needed Date: Wed, 20 Feb 2002 22:22:58 +0100 MIME-Version: 1.0 Content-type: text/plain X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: Peter.Schmidmeir@epost.de Precedence: bulk X-list: linux-dvb I have Red-Hat Linux installed on my system and I am new to Linux - so maybe there is a simple solution to my problem. make insmod of the dvb-driver throws the following error (everything before that seemed to work correctly): " Using /lib/modules/2.4.7-10custom/kernel/drivers/i2c/i2c-core.o Using /lib/modules/2.4.7-10custom/kernel/drivers/media/video/videodev.o dvb.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including inva lid IO or IRQ parameters make: *** [insmod] Error 1 " dmesg says this: " saa7146_core.o: saa7146(1): bus:0, rev:1, mem:0xcc8a4000. i2c-core.o: client [VES1893] registered to adapter [saa7146(1)](pos. 0). VES1893: attaching VES1893 at 0x10 to adapter saa7146(1) SP8870: no SP8870 found ... tuner: chip found @ 0x61 i2c-core.o: client [i2c tv tuner chip] registered to adapter [saa7146(1)](pos. 1 ). i2c-core.o: adapter saa7146(1) registered as adapter 0. dvb: no dvb(s) found! " I have tried to recompile my Kernel but it didn't help. Thanks in advance, Peter -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 20 22:03:40 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 8155 invoked by uid 0); 20 Feb 2002 22:03:40 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 20 Feb 2002 22:03:40 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16depK-0003Tn-00; Wed, 20 Feb 2002 23:03:02 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 20 Feb 2002 22:58:45 +0100 (CET) Received: from mail.gmx.net ([213.165.64.20]) by chambertin.convergence.de with smtp (Exim 3.33 #2 ) id 16delB-0002SU-00 for ; Wed, 20 Feb 2002 22:58:45 +0100 Received: (qmail 16697 invoked by uid 0); 20 Feb 2002 21:58:41 -0000 Received: from pd9e6e5e0.dip0.t-ipconnect.de (HELO gmx.de) (217.230.229.224) by mail.gmx.net (mp003-rz3) with SMTP; 20 Feb 2002 21:58:41 -0000 Message-ID: <3C741C44.2F16E79@gmx.de> Date: Wed, 20 Feb 2002 22:59:32 +0100 From: Joerg Riechardt X-Mailer: Mozilla 4.79 [en] (Win98; U) X-Accept-Language: de,en MIME-Version: 1.0 To: LinuxTV Subject: [linux-dvb] Re: Infrared and CI References: <3C73DA90.8FA702EF@246tNt.com> <3C74047F.4FA7B0D7@gmx.de> <3C740F07.19384CE7@gmx.de> Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: J.Riechardt@gmx.de Precedence: bulk X-list: linux-dvb writing faster than thinking ..., you probably have a Rev. 2.1, I had a Rev 1.3 in mind. But my last message is the right way to go. Jörg -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 20 22:08:03 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 8440 invoked by uid 0); 20 Feb 2002 22:08:02 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 20 Feb 2002 22:08:02 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16detX-0003jc-00; Wed, 20 Feb 2002 23:07:23 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 20 Feb 2002 23:04:27 +0100 (CET) Received: from moutvdom01.kundenserver.de ([195.20.224.200]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16deqh-0003YL-00 for ; Wed, 20 Feb 2002 23:04:27 +0100 Received: from [195.20.224.204] (helo=mrvdom00.kundenserver.de) by moutvdom01.kundenserver.de with esmtp (Exim 2.12 #2) id 16deqg-00022w-00; Wed, 20 Feb 2002 23:04:26 +0100 Received: from p3ee292c2.dip0.t-ipconnect.de ([62.226.146.194] helo=flood-net.de) by mrvdom00.kundenserver.de with esmtp (Exim 2.12 #2) id 16deqf-0001bG-00; Wed, 20 Feb 2002 23:04:26 +0100 Received: from localhost (unknown [127.0.0.1]) by flood-net.de (Postfix) with ESMTP id 860DB7DC0; Wed, 20 Feb 2002 22:03:22 +0000 (UTC) Content-Transfer-Encoding: 8bit Content-Type: text/plain; charset="iso-8859-1" Date: Wed, 20 Feb 2002 23:05:47 +0100 From: Andreas Roedl In-Reply-To: <001801c1ba54$c4decec0$152ea8c0@Peter> Message-Id: <20020220220240.29B3C7DBB@flood-net.de> MIME-Version: 1.0 Organization: Flood-Net Received: from flood-net.de (localhost [127.0.0.1]) by localhost (AvMailGate-6.11.0.4) id 22545-3FBD3790; Wed, 20 Feb 2002 23:02:40 +0100 Received: from there (hydra.flood-net.local [10.0.0.11]) by flood-net.de (Postfix) with SMTP id 29B3C7DBB; Wed, 20 Feb 2002 23:02:40 +0100 (CET) References: <001801c1ba54$c4decec0$152ea8c0@Peter> Subject: [linux-dvb] Re: Problems with insmod - Help needed To: "Peter Schmidmeir" , X-AntiVirus: OK! AvMailGate Version 6.11.0.5 at exciter has not found any known virus in this email. X-Mailer: KMail [version 1.3] X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: flood@flood-net.de Precedence: bulk X-list: linux-dvb Hello! Am Mittwoch, 20. Februar 2002 22:22 schrieb Peter Schmidmeir: > saa7146_core.o: saa7146(1): bus:0, rev:1, mem:0xcc8a4000. > i2c-core.o: client [VES1893] registered to adapter [saa7146(1)](pos. 0). > VES1893: attaching VES1893 at 0x10 to adapter saa7146(1) > SP8870: no SP8870 found ... > tuner: chip found @ 0x61 > i2c-core.o: client [i2c tv tuner chip] registered to adapter > [saa7146(1)](pos. 1 ). > i2c-core.o: adapter saa7146(1) registered as adapter 0. > dvb: no dvb(s) found! You could change the return value of the get_card_type() function which you can find in dvb.c to "DVB_CARD_TT_SIEMENS". This is not the solution, but a quick check. Later on you can add the subvendor id of your dvb board to the switch-statement in the same function. If you don't know what I'm talking about, feel free to ask me for a patch. :-) Andi (Whose DVB-T-Board still isn't working :-() -- Web: http://www.flood-net.de/ Mail: flood@flood-net.de Phone: +49-(0)-30-680577-44 Linux opens doors, not windows! http://www.bundestux.de/ http://counter.li.org/ -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Thu Feb 21 06:02:59 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 1399 invoked by uid 0); 21 Feb 2002 06:02:59 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 21 Feb 2002 06:02:59 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dmJC-00072Z-00; Thu, 21 Feb 2002 07:02:22 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Thu, 21 Feb 2002 06:56:25 +0100 (CET) Received: from [211.48.62.165] (helo=relay5.kornet.net) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dmDQ-0005yy-00 for ; Thu, 21 Feb 2002 06:56:25 +0100 Received: from localhost (61.77.230.242) by relay5.kornet.net; 21 Feb 2002 14:55:39 +0900 Message-ID: <002a01c1ba9c$7d47da50$6f01a8c0@LocalHost> From: =?ks_c_5601-1987?B?wMy787/4?= To: Subject: [linux-dvb] DVB MHP Steam Date: Thu, 21 Feb 2002 14:56:21 +0900 MIME-Version: 1.0 Content-type: text/plain X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: swlee@keti.re.kr Precedence: bulk X-list: linux-dvb Yes.. I need it. Thanks. =================================== Internet-Media Research Center, KETI. Researcher. Lee Sang Won ICQ# : 16089738 Phone : +82-31-780-7024 Fax : +82-31-780-7060 =================================== -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Thu Feb 21 13:34:58 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 17199 invoked by uid 0); 21 Feb 2002 13:34:58 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 21 Feb 2002 13:34:58 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dtMX-00037v-00; Thu, 21 Feb 2002 14:34:17 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Thu, 21 Feb 2002 14:27:49 +0100 (CET) Received: from ulima.unil.ch ([130.223.144.143]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dtGH-0001ah-00 for ; Thu, 21 Feb 2002 14:27:49 +0100 Received: by ulima.unil.ch (Postfix, from userid 500) id 338AE5CEF9; Thu, 21 Feb 2002 14:27:48 +0100 (CET) Date: Thu, 21 Feb 2002 14:27:48 +0100 From: Gregoire Favre To: linux-dvb@linuxtv.org Subject: [linux-dvb] OT: Business Software Alliance Writes European Regulations? Message-ID: <20020221132748.GE7621@ulima.unil.ch> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit User-Agent: Mutt/1.3.27i X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: greg@ulima.unil.ch Precedence: bulk X-list: linux-dvb I think it might be of some interest: http://slashdot.org/articles/02/02/20/1351219.shtml?tid=155 Grégoire ________________________________________________________________ http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Thu Feb 21 15:36:34 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 23540 invoked by uid 0); 21 Feb 2002 15:36:34 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 21 Feb 2002 15:36:34 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dvGG-0002Qi-00; Thu, 21 Feb 2002 16:35:56 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Thu, 21 Feb 2002 16:32:01 +0100 (CET) Received: from mail.epost.de ([64.39.38.76]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dvCS-00028a-00 for ; Thu, 21 Feb 2002 16:32:00 +0100 Received: from Peter (62.245.148.76) by mail.epost.de (5.5.052) (authenticated as Peter.Schmidmeir@epost.de) id 3C6B20EC001736F1; Thu, 21 Feb 2002 16:31:34 +0100 Message-ID: <003401c1baec$d5bbd6f0$152ea8c0@Peter> From: "Peter Schmidmeir" To: "Andreas Roedl" , References: <001801c1ba54$c4decec0$152ea8c0@Peter> <20020220220240.29B3C7DBB@flood-net.de> Subject: [linux-dvb] Re: Problems with insmod - Help needed Date: Thu, 21 Feb 2002 16:31:29 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: Peter.Schmidmeir@epost.de Precedence: bulk X-list: linux-dvb Thank you - now everything works Hmmm i just wonder why my dumb card had the wrong number.... Peter ----- Original Message ----- From: "Andreas Roedl" To: "Peter Schmidmeir" ; Sent: Wednesday, February 20, 2002 11:05 PM Subject: Re: [linux-dvb] Problems with insmod - Help needed > Hello! > > Am Mittwoch, 20. Februar 2002 22:22 schrieb Peter Schmidmeir: > > > saa7146_core.o: saa7146(1): bus:0, rev:1, mem:0xcc8a4000. > > i2c-core.o: client [VES1893] registered to adapter [saa7146(1)](pos. 0). > > VES1893: attaching VES1893 at 0x10 to adapter saa7146(1) > > SP8870: no SP8870 found ... > > tuner: chip found @ 0x61 > > i2c-core.o: client [i2c tv tuner chip] registered to adapter > > [saa7146(1)](pos. 1 ). > > i2c-core.o: adapter saa7146(1) registered as adapter 0. > > dvb: no dvb(s) found! > > You could change the return value of the get_card_type() function which you > can find in dvb.c to "DVB_CARD_TT_SIEMENS". This is not the solution, but a > quick check. Later on you can add the subvendor id of your dvb board to the > switch-statement in the same function. > > If you don't know what I'm talking about, feel free to ask me for a patch. :-) > > > Andi > (Whose DVB-T-Board still isn't working :-() > -- > Web: http://www.flood-net.de/ > Mail: flood@flood-net.de > Phone: +49-(0)-30-680577-44 > Linux opens doors, not windows! > http://www.bundestux.de/ http://counter.li.org/ -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Thu Feb 21 15:41:37 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 23847 invoked by uid 0); 21 Feb 2002 15:41:37 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 21 Feb 2002 15:41:37 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dvL9-0002n9-00; Thu, 21 Feb 2002 16:40:59 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Thu, 21 Feb 2002 16:38:01 +0100 (CET) Received: from mail.gmx.net ([213.165.64.20]) by chambertin.convergence.de with smtp (Exim 3.33 #2 ) id 16dvIH-0002VG-00 for ; Thu, 21 Feb 2002 16:38:01 +0100 Received: (qmail 12597 invoked by uid 0); 21 Feb 2002 15:37:30 -0000 Received: from pd9e46238.dip.t-dialin.net (HELO avia) (217.228.98.56) by mail.gmx.net (mp014-rz3) with SMTP; 21 Feb 2002 15:37:30 -0000 Message-ID: <00ff01c1baed$a291e390$4b00000a@avia> From: "Felix Domke" To: "LinuxTV" References: <000c01c1ba64$ca8dc870$1b32e682@rotwailer><024601c1ba1b$2a2b5210$0a00a8c0@jeanclaude> <15475.46451.380575.843985@titano.metzler> Subject: [linux-dvb] Adding a real cam to a nova - was: Re: Re: NOVA+encrypted channels... Date: Thu, 21 Feb 2002 16:37:13 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4807.1700 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4807.1700 X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: tmbinc@gmx.net Precedence: bulk X-list: linux-dvb > I think there is a legal way. Add a PCMCIA interface to your PC, plug a CAM, > and write a PCMCIA driver using the pcmcia-cs package. You'll find all the > documentation on the Common Interface at www.etsi.org . > I think it shouldn't be very difficult. We once build an interface to a CA-Module (the Modules used in the d-box and Micronik (for example in the MAM600+)). We took an old PCMCIA-Socket, disconnected the TS at the tuner, and fed it through the CAM. These CA-Modules aren't anything like CI or even PCMCIA, they just share the physical interface. It is a much easier interface, both at the hardware layer and in the software layer. It just controlled via I2C-Commands, which are undocumented but easy to sniff using some hardware. We never came to the part where the cam was actually descrambling, since we had never connect a cardslot, but the cam accepted and responded to our I2C-Commands and let the TS stream come through (which is an indication for a proper initialisation of the hardware of the cam). We had to invert some lines before and after the CAM though. (explained a bit at http://www.dominance.net/overflow/kg.html, in german) The advantage of this "project" would be that it's perfectly legal (comparable to a self-made CI-interface), the disadvantage is, off course, that you're limited to Betacrypt, or, with the 0CAM-Patch (which is, in my eyes, not so legal anymore), even irdeto. the next step would be to extend this to a CI-interface, but this would be a bit more complex. Maybe somebody is able to take a PCI->PCMCIA bridge, and reconnect the redefined lines to the NOVA, which leads to a "dual" PCI card. bye, felix domke -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Thu Feb 21 16:05:45 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 725 invoked by uid 0); 21 Feb 2002 16:05:45 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 21 Feb 2002 16:05:45 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dviV-0004Qr-00; Thu, 21 Feb 2002 17:05:07 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Thu, 21 Feb 2002 17:02:56 +0100 (CET) Received: from [193.45.189.139] (helo=pcmsgroup.com) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dvgN-0004CJ-00 for ; Thu, 21 Feb 2002 17:02:56 +0100 Received: from [192.168.161.55] (account john.williams@pcmsdatafit.co.uk HELO JohnW.pcmsdatafit.co.uk) by pcmsgroup.com (CommuniGate Pro SMTP 3.4.5) with ESMTP id 778861 for linux-dvb@linuxtv.org; Thu, 21 Feb 2002 16:04:21 +0000 Message-Id: <5.1.0.14.1.20020221160037.009f92c0@mail-host.pcmsgroup.com> X-Sender: John.Williams@pcmsdatafit.co.uk@mail-host.pcmsgroup.com X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Thu, 21 Feb 2002 16:01:52 +0000 To: linux-dvb@linuxtv.org From: John Williams Subject: [linux-dvb] Re: Adding a real cam to a nova - was: Re: Re: NOVA+encrypted channels... In-Reply-To: <00ff01c1baed$a291e390$4b00000a@avia> References: <000c01c1ba64$ca8dc870$1b32e682@rotwailer> <024601c1ba1b$2a2b5210$0a00a8c0@jeanclaude> <15475.46451.380575.843985@titano.metzler> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: John.Williams@pcmsdatafit.co.uk Precedence: bulk X-list: linux-dvb At 16:37 21/02/02 +0100, you wrote: > > I think there is a legal way. Add a PCMCIA interface to your PC, plug a >CAM, > > and write a PCMCIA driver using the pcmcia-cs package. You'll find all the > > documentation on the Common Interface at www.etsi.org . > > I think it shouldn't be very difficult. Maybe an alternative would be to modify a DVB-S or DVB-C board to use a DVB-T tuner module. Is this possible ? Or are there demodulator chips outside of the tuner that would need to be changed ? ______________________________________________ The information contained in this e-mail is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. If you are not the intended recipient of this e-mail, the use of this information or any disclosure, copying or distribution is prohibited and may be unlawful. If you received this in error, please contact the sender and delete the material from any computer. The views expressed in this e-mail may not necessarily be the views of The PCMS Group plc and should not be taken as authority to carry out any instruction contained. -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Thu Feb 21 16:13:18 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 1294 invoked by uid 0); 21 Feb 2002 16:13:18 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 21 Feb 2002 16:13:18 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dvpr-0004w8-00; Thu, 21 Feb 2002 17:12:43 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Thu, 21 Feb 2002 17:10:56 +0100 (CET) Received: from www.k.ro ([194.102.255.23] ident=root) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dvfG-0004Bb-00 for ; Thu, 21 Feb 2002 17:01:46 +0100 Received: (from www@localhost) by www.k.ro (8.11.2/8.11.2) id g1LG1ew01191; Thu, 21 Feb 2002 18:01:40 +0200 Date: Thu, 21 Feb 2002 18:01:40 +0200 Message-Id: <200202211601.g1LG1ew01191@www.k.ro> From: X-Mailer: Super-Mail@k.ro http://mail.k.ro/ Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Sender-IP: 212.208.74.200 To: linux-dvb@linuxtv.org Subject: [linux-dvb] "BootARM fail"? X-Approved-By: dirk@convergence.de X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: extremeforce@k.ro Precedence: bulk X-list: linux-dvb Hello everybody, I am new in linux world. Can anybody help me? With some day before I buy a Fujitsu-Siemens DVB Sat card. The card work good with the drivers provided by Siemens, but with those drivers is very painful to select a frequency and to search a channel and this is why I installed the latest drivers from TechnoTrend (2.02 if I remember exactly). The card was working, but in a moment, when I tried to change the channel, there was an error message from windows and the application it was switched off. After that I try to restart the application but I receive an error message from application : "BootARM fail". After that I reinstall the original driver and after that the application from Siemens works. I remove the Siemens driver again and I reinstall the TechnoTrend driver and application, everything was ok until I was trying to search a new channel. I receive the same error message, but from this moment was impossible to use the card. I try to reinstall the driver and application but after that the application from Siemens not start. Also I reinstall the windows and the drivers from Siemens but don't work. If I will try to install the linux driver the card will works ? I don't know if is a hardware problem or a software problem ? Thanks in advance. Best Regards, Ghitsa. ------------------------------ K Free E-mail http://www.k.ro/ by KappaNet http://www.kappa.ro/ -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Thu Feb 21 16:29:34 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 6152 invoked by uid 0); 21 Feb 2002 16:29:34 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 21 Feb 2002 16:29:34 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dw5T-00063z-00; Thu, 21 Feb 2002 17:28:51 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Thu, 21 Feb 2002 17:25:34 +0100 (CET) Received: from moutvdom00.kundenserver.de ([195.20.224.149]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dw2H-0005bC-00 for ; Thu, 21 Feb 2002 17:25:33 +0100 Received: from [195.20.224.204] (helo=mrvdom00.kundenserver.de) by moutvdom00.kundenserver.de with esmtp (Exim 2.12 #2) id 16dw2B-00066A-00; Thu, 21 Feb 2002 17:25:27 +0100 Received: from p3e9922c2.dip0.t-ipconnect.de ([62.153.34.194] helo=flood-net.de) by mrvdom00.kundenserver.de with esmtp (Exim 2.12 #2) id 16dw29-0004iS-00; Thu, 21 Feb 2002 17:25:25 +0100 Received: from localhost (unknown [127.0.0.1]) by flood-net.de (Postfix) with ESMTP id E8A3A7B25; Thu, 21 Feb 2002 16:25:19 +0000 (UTC) Content-Transfer-Encoding: 8bit Content-Type: text/plain; charset="iso-8859-1" Date: Thu, 21 Feb 2002 17:27:16 +0100 From: Andreas Roedl In-Reply-To: <003401c1baec$d5bbd6f0$152ea8c0@Peter> Message-Id: <20020221162509.CED0C7B35@flood-net.de> MIME-Version: 1.0 Organization: Flood-Net Received: from flood-net.de (localhost [127.0.0.1]) by localhost (AvMailGate-6.11.0.4) id 17447-7197E967; Thu, 21 Feb 2002 17:25:09 +0100 Received: from there (hydra.flood-net.local [10.0.0.11]) by flood-net.de (Postfix) with SMTP id CED0C7B35; Thu, 21 Feb 2002 17:25:09 +0100 (CET) References: <001801c1ba54$c4decec0$152ea8c0@Peter> <20020220220240.29B3C7DBB@flood-net.de> <003401c1baec$d5bbd6f0$152ea8c0@Peter> Subject: [linux-dvb] Re: Problems with insmod - Help needed To: "Peter Schmidmeir" , X-AntiVirus: OK! AvMailGate Version 6.11.0.5 at exciter has not found any known virus in this email. X-Mailer: KMail [version 1.3] X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: flood@flood-net.de Precedence: bulk X-list: linux-dvb Hello! Am Donnerstag, 21. Februar 2002 16:31 schrieb Peter Schmidmeir: > Thank you - now everything works > Hmmm i just wonder why my dumb card had the wrong number.... Yes, but you should/could send your lspci -v output to rjkm@convergence.de. He'll add the sub device ids to the CVS tree :-) http://linuxtv.org/cgi-bin/cvsweb.cgi/DVB/driver/dvb.c Andi -- Web: http://www.flood-net.de/ Mail: flood@flood-net.de Phone: +49-(0)-30-680577-44 Linux opens doors, not windows! http://www.bundestux.de/ http://counter.li.org/ -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Thu Feb 21 16:44:09 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 11013 invoked by uid 0); 21 Feb 2002 16:44:09 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 21 Feb 2002 16:44:09 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dwJh-0007Wh-00; Thu, 21 Feb 2002 17:43:33 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Thu, 21 Feb 2002 17:39:37 +0100 (CET) Received: from mail.epost.de ([64.39.38.76]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dwFt-0007F7-00 for ; Thu, 21 Feb 2002 17:39:37 +0100 Received: from Peter (62.245.148.76) by mail.epost.de (5.5.052) (authenticated as Peter.Schmidmeir@epost.de) id 3C6B20EC00177490; Thu, 21 Feb 2002 17:39:10 +0100 Message-ID: <005e01c1baf6$4784a100$152ea8c0@Peter> From: "Peter Schmidmeir" To: "Andreas Roedl" , References: <001801c1ba54$c4decec0$152ea8c0@Peter> <20020220220240.29B3C7DBB@flood-net.de> <003401c1baec$d5bbd6f0$152ea8c0@Peter> <20020221162509.CED0C7B35@flood-net.de> Subject: [linux-dvb] Re: Problems with insmod - Help needed Date: Thu, 21 Feb 2002 17:39:06 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: Peter.Schmidmeir@epost.de Precedence: bulk X-list: linux-dvb Hello lspci -v says: 00:0d.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) Subsystem: Technotrend Systemtechnik GmbH: Unknown device 1002 Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at d8000000 (32-bit, non-prefetchable) [size=512] and lspci -n says: 00:0d.0 Class 0480: 1131:7146 (rev 01) I have sent it to rjkm@convergence.de Peter ----- Original Message ----- From: "Andreas Roedl" To: "Peter Schmidmeir" ; Sent: Thursday, February 21, 2002 5:27 PM Subject: Re: [linux-dvb] Problems with insmod - Help needed > Hello! > > Am Donnerstag, 21. Februar 2002 16:31 schrieb Peter Schmidmeir: > > Thank you - now everything works > > Hmmm i just wonder why my dumb card had the wrong number.... > > Yes, but you should/could send your lspci -v output to rjkm@convergence.de. > He'll add the sub device ids to the CVS tree :-) > > http://linuxtv.org/cgi-bin/cvsweb.cgi/DVB/driver/dvb.c > > > Andi > > -- > Web: http://www.flood-net.de/ > Mail: flood@flood-net.de > Phone: +49-(0)-30-680577-44 > Linux opens doors, not windows! > http://www.bundestux.de/ http://counter.li.org/ -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Thu Feb 21 17:55:58 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 2560 invoked by uid 0); 21 Feb 2002 17:55:58 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 21 Feb 2002 17:55:58 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dxRB-0002d2-00; Thu, 21 Feb 2002 18:55:21 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Thu, 21 Feb 2002 18:52:44 +0100 (CET) Received: from gw-nl4.philips.com ([212.153.190.6]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dxOe-0002OA-00 for ; Thu, 21 Feb 2002 18:52:44 +0100 Received: from smtpscan-nl4.philips.com (localhost.philips.com [127.0.0.1]) by gw-nl4.philips.com with ESMTP id SAA16057 for ; Thu, 21 Feb 2002 18:51:37 +0100 (CET) (envelope-from immo.benjes@philips.com) From: immo.benjes@philips.com Received: from smtpscan-nl4.philips.com(130.139.36.24) by gw-nl4.philips.com via mwrap (4.0a) id xma016054; Thu, 21 Feb 02 18:51:37 +0100 Received: from smtprelay-nl1.philips.com (localhost [127.0.0.1]) by smtpscan-nl4.philips.com (8.9.3/8.8.5-1.2.2m-19990317) with ESMTP id SAA28807 for ; Thu, 21 Feb 2002 18:52:42 +0100 (MET) Received: from hbg001soh.diamond.philips.com (e1soh01.diamond.philips.com [130.143.165.212]) by smtprelay-nl1.philips.com (8.9.3/8.8.5-1.2.2m-19990317) with ESMTP id SAA11070 for ; Thu, 21 Feb 2002 18:52:41 +0100 (MET) To: , jonathan.foster@philips.com Subject: [linux-dvb] Proposal for MHP extension Date: Thu, 21 Feb 2002 17:52:37 +0000 Message-ID: X-MIMETrack: Serialize by Router on hbg001soh/H/SERVER/PHILIPS(Release 5.0.5 |September 22, 2000) at 21/02/2002 19:11:23, Serialize complete at 21/02/2002 19:11:23 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: 8bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: immo.benjes@philips.com Precedence: bulk X-list: linux-dvb Hi Jon, could you write a bit about a 'proposal on how to extend the MHP with your BackgroundOrdering. Immo -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Thu Feb 21 19:39:46 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 3761 invoked by uid 0); 21 Feb 2002 19:39:46 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 21 Feb 2002 19:39:46 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dz3c-00005o-00; Thu, 21 Feb 2002 20:39:08 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Thu, 21 Feb 2002 20:35:52 +0100 (CET) Received: from pd9e0f5db.dip.t-dialin.net ([217.224.245.219] helo=catania.camorra.org) by chambertin.convergence.de with smtp (Exim 3.33 #2 ) id 16dz0S-0008G9-00 for ; Thu, 21 Feb 2002 20:35:52 +0100 Received: (qmail 4473 invoked by uid 2009); 21 Feb 2002 19:30:50 -0000 Sender: martin@catania.camorra.org To: immo.benjes@philips.com Cc: , jonathan.foster@philips.com Subject: [linux-dvb] Re: Proposal for MHP extension References: From: Martin Springer Organization: camorra.org Date: 21 Feb 2002 20:30:49 +0100 In-Reply-To: Message-ID: Lines: 17 User-Agent: Gnus/5.0808 (Gnus v5.8.8) XEmacs/21.4 (Common Lisp) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: dtv@camorra.org Precedence: bulk X-list: linux-dvb immo.benjes@philips.com writes: > Hi Jon, > > could you write a bit about a 'proposal on how to extend the MHP with your > BackgroundOrdering. Is the Philips MHP stack going open source now? Welcome to the list! We are eager to discuss Linux/MHP related issues with you. sincerely -- Martin Springer GPG Key-ID 1024D/8EFE7B2F Rosenthaler Str. 9 ph/ +49 (0)30- 28 30 08 1 D-10119 Berlin +49 (0)172 - 30 36 70 2 -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Thu Feb 21 19:56:51 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 8995 invoked by uid 0); 21 Feb 2002 19:56:51 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 21 Feb 2002 19:56:51 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dzKA-0000rj-00; Thu, 21 Feb 2002 20:56:14 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Thu, 21 Feb 2002 20:54:12 +0100 (CET) Received: from moutvdom01.kundenserver.de ([195.20.224.200]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dzIC-0000Yy-00 for ; Thu, 21 Feb 2002 20:54:12 +0100 Received: from [195.20.224.219] (helo=mrvdom03.kundenserver.de) by moutvdom01.kundenserver.de with esmtp (Exim 2.12 #2) id 16dwZq-0000Lj-00; Thu, 21 Feb 2002 18:00:14 +0100 Received: from p3ee286f1.dip0.t-ipconnect.de ([62.226.134.241] helo=flood-net.de) by mrvdom03.kundenserver.de with esmtp (Exim 2.12 #2) id 16dwZm-0006sz-00; Thu, 21 Feb 2002 18:00:10 +0100 Received: from localhost (unknown [127.0.0.1]) by flood-net.de (Postfix) with ESMTP id 38F2E7C75; Thu, 21 Feb 2002 17:00:06 +0000 (UTC) Content-Transfer-Encoding: 8bit Content-Type: text/plain; charset="iso-8859-1" Date: Thu, 21 Feb 2002 18:01:57 +0100 From: Andreas Roedl In-Reply-To: <200202211601.g1LG1ew01191@www.k.ro> Message-Id: <20020221165949.CD7697C2F@flood-net.de> MIME-Version: 1.0 Organization: Flood-Net Received: from flood-net.de (localhost [127.0.0.1]) by localhost (AvMailGate-6.11.0.4) id 25442-7B22BE7F; Thu, 21 Feb 2002 17:59:49 +0100 Received: from there (hydra.flood-net.local [10.0.0.11]) by flood-net.de (Postfix) with SMTP id CD7697C2F; Thu, 21 Feb 2002 17:59:49 +0100 (CET) References: <200202211601.g1LG1ew01191@www.k.ro> Subject: [linux-dvb] Re: "BootARM fail"? To: , linux-dvb@linuxtv.org X-AntiVirus: OK! AvMailGate Version 6.11.0.5 at exciter has not found any known virus in this email. X-Mailer: KMail [version 1.3] X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: flood@flood-net.de Precedence: bulk X-list: linux-dvb Hello! Am Donnerstag, 21. Februar 2002 17:01 schrieb extremeforce@k.ro: Never seen a single letter second level domain before... > If I will try to install the linux driver the card will works ? Try it. Andi -- Web: http://www.flood-net.de/ Mail: flood@flood-net.de Phone: +49-(0)-30-680577-44 Linux opens doors, not windows! http://www.bundestux.de/ http://counter.li.org/ -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Thu Feb 21 20:01:17 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 12973 invoked by uid 0); 21 Feb 2002 20:01:17 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 21 Feb 2002 20:01:17 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dzOU-00020B-00; Thu, 21 Feb 2002 21:00:42 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Thu, 21 Feb 2002 20:59:02 +0100 (CET) Received: from mailout08.sul.t-online.com ([194.25.134.20]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16dzMs-0000zF-00 for ; Thu, 21 Feb 2002 20:59:02 +0100 Received: from fwd06.sul.t-online.de by mailout08.sul.t-online.com with smtp id 16dzMr-0003U8-07; Thu, 21 Feb 2002 20:59:01 +0100 Received: from linuxserv.kuba4u.de (320097834891-0001@[80.131.80.33]) by fmrl06.sul.t-online.com with esmtp id 16dzMp-18JIKOC; Thu, 21 Feb 2002 20:58:59 +0100 Received: from a600base (a600base.kuba4u.de [192.168.98.50]) by linuxserv.kuba4u.de (8.9.3/8.8.7) with SMTP id TAA27065 for ; Thu, 21 Feb 2002 19:36:06 +0100 From: Marcus Kuba To: linux-dvb@linuxtv.org Date: Thu, 21 Feb 2002 19:37:27 +0100 X-Priority: 3 (Normal) Reply-To: marcus@kuba4u.de In-Reply-To: <00ff01c1baed$a291e390$4b00000a@avia> Message-Id: Subject: [linux-dvb] Re: Adding a real cam to a nova - was: Re: Re: NOVA+encrypted channels... MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" X-Mailer: Opera 6.01 build 1041 X-Sender: 320097834891-0001@t-dialin.net X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: marcus@kuba4u.de Precedence: bulk X-list: linux-dvb Am 21.02.2002 16:37:13, schrieb "Felix Domke" : >the next step would be to extend this to a CI-interface, but this would be a >bit more complex. Maybe somebody is able to take a PCI->PCMCIA bridge, and >reconnect the redefined lines to the NOVA, which leads to a "dual" PCI card. FYI: Hauppauge already has announced a NOVA-CI. The price incl. remote is something around 180?. The question now is if that version works with the drivers... Greetings, Marcus -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Feb 22 09:43:34 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 17352 invoked by uid 0); 22 Feb 2002 09:43:34 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 22 Feb 2002 09:43:34 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eCDl-0002In-00; Fri, 22 Feb 2002 10:42:29 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 22 Feb 2002 10:38:25 +0100 (CET) Received: from [193.45.189.139] (helo=pcmsgroup.com) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eC9o-0001hW-00 for ; Fri, 22 Feb 2002 10:38:24 +0100 Received: from [192.168.161.55] (account john.williams@pcmsdatafit.co.uk HELO JohnW.pcmsdatafit.co.uk) by pcmsgroup.com (CommuniGate Pro SMTP 3.4.5) with ESMTP id 779812 for linux-dvb@linuxtv.org; Fri, 22 Feb 2002 09:09:22 +0000 Message-Id: <5.1.0.14.1.20020222090353.009f6b20@mail-host.pcmsgroup.com> X-Sender: John.Williams@pcmsdatafit.co.uk@mail-host.pcmsgroup.com X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Fri, 22 Feb 2002 09:06:49 +0000 To: linux-dvb@linuxtv.org From: John Williams Subject: [linux-dvb] Re: Adding a real cam to a nova - was: Re: Re: NOVA+encrypted channels... In-Reply-To: References: <00ff01c1baed$a291e390$4b00000a@avia> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: John.Williams@pcmsdatafit.co.uk Precedence: bulk X-list: linux-dvb At 19:37 21/02/02 +0100, you wrote: >Am 21.02.2002 16:37:13, schrieb "Felix Domke" : > > >the next step would be to extend this to a CI-interface, but this would be a > >bit more complex. Maybe somebody is able to take a PCI->PCMCIA bridge, and > >reconnect the redefined lines to the NOVA, which leads to a "dual" PCI card. > >FYI: Hauppauge already has announced a NOVA-CI. The price incl. remote is >something around >180?. The question now is if that version works with the drivers... Where can I buy one ? ______________________________________________ The information contained in this e-mail is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. If you are not the intended recipient of this e-mail, the use of this information or any disclosure, copying or distribution is prohibited and may be unlawful. If you received this in error, please contact the sender and delete the material from any computer. The views expressed in this e-mail may not necessarily be the views of The PCMS Group plc and should not be taken as authority to carry out any instruction contained. -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Feb 22 09:44:33 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 17366 invoked by uid 0); 22 Feb 2002 09:44:33 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 22 Feb 2002 09:44:33 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eCF9-0002gz-00; Fri, 22 Feb 2002 10:43:55 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 22 Feb 2002 10:42:16 +0100 (CET) Received: from [194.109.134.226] (helo=mail.adrenochrome.nl ident=mail) by chambertin.convergence.de with TLSv1:DES-CBC3-SHA:168 encrypted esmtp (Exim 3.33 #2 ) id 16eCDX-0002Gj-00 for ; Fri, 22 Feb 2002 10:42:16 +0100 Received: from buserror-extern.convergence.de ([212.84.236.66] helo=rjkm.de) by mail.adrenochrome.nl with TLSv1:DES-CBC3-SHA:168 encrypted esmtp (Exim 3.33 #1 (Debian)) id 16dIL8-0006wH-00 for ; Tue, 19 Feb 2002 23:02:22 +0100 Received: (from rjkm@localhost) by rjkm.de (8.12.0.Beta19/8.12.0.Beta19) id g1M8gHPH001340; Fri, 22 Feb 2002 09:42:17 +0100 From: Ralph Metzler Message-ID: <15478.1129.422881.306251@draal.metzler> Date: Fri, 22 Feb 2002 09:42:17 +0100 To: marcus@kuba4u.de Cc: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: Adding a real cam to a nova - was: Re: Re: NOVA+encrypted channels... In-Reply-To: References: <00ff01c1baed$a291e390$4b00000a@avia> X-Mailer: VM 6.95 under 21.4 (patch 4) "Artificial Intelligence" XEmacs Lucid Mime-Version: 1.0 (generated by tm-edit 1.8) Content-Type: text/plain; charset=US-ASCII X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: rjkm@convergence.de Precedence: bulk X-list: linux-dvb Marcus Kuba writes: > Am 21.02.2002 16:37:13, schrieb "Felix Domke" : > > >the next step would be to extend this to a CI-interface, but this would be a > >bit more complex. Maybe somebody is able to take a PCI->PCMCIA bridge, and > >reconnect the redefined lines to the NOVA, which leads to a "dual" PCI card. > > FYI: Hauppauge already has announced a NOVA-CI. The price incl. remote is something around > 180?. The question now is if that version works with the drivers... Maybe the normal "Nova part". The "remote part" might be similar to what they did with older Bt848 cards. So, maybe with some patches ... The CI part most definitely won't work. Somebody will have to write drivers for this. Ralph -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Feb 22 09:47:38 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 21586 invoked by uid 0); 22 Feb 2002 09:47:37 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 22 Feb 2002 09:47:37 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eCI4-000355-00; Fri, 22 Feb 2002 10:46:56 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 22 Feb 2002 10:45:18 +0100 (CET) Received: from mail.mktconnect.com ([62.172.158.195] helo=mail.e-market.net.uk) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eCEZ-0002S0-00 for ; Fri, 22 Feb 2002 10:43:19 +0100 Received: from lmi-keyb-mrs1.e-market.net.uk (unverified) by mail.e-market.net.uk (Content Technologies SMTPRS 2.0.15) with ESMTP id for ; Fri, 22 Feb 2002 09:33:33 +0000 Received: from lmi-keyb-mrs1.e-market.net.uk (62.172.158.249) by lmi-keyb-mrs1.e-market.net.uk (5.1.036) id 3C04D36A00319DC0 for linux-dvb@linuxtv.org; Fri, 22 Feb 2002 09:29:28 +0000 Received: from vuasecure.talbotuw.com (194.130.214.45) by lmi-keyb-mrs1.e-market.net.uk (5.1.036) id 3C178E77000F3DBA for linux-dvb@linuxtv.org; Fri, 22 Feb 2002 09:29:28 +0000 Received: from 194.130.214.200 by vuasecure.talbotuw.com with ESMTP ( Tumbleweed MMS SMTP Relay (MMS v4.7)); Fri, 22 Feb 2002 09:33:41 -0000 X-Server-Uuid: 97ab9c62-2b42-11d4-90ae-00a0c9294605 Received: by vua_exchange.venton.co.uk with Internet Mail Service ( 5.5.2653.19) id ; Fri, 22 Feb 2002 09:38:09 -0000 Message-Id: From: "Jonathan Meads" To: "'linux-dvb@linuxtv.org'" Subject: [linux-dvb] Re: Adding a real cam to a nova - was: Re: Re: NOVA+encrypte d channels... Date: Fri, 22 Feb 2002 09:38:07 -0000 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) X-WSS-ID: 1068CFFF429795-01-03 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 7bit X-Approved-By: dirk@convergence.de X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: dirk@convergence.de Precedence: bulk X-list: linux-dvb Marcus, Do you know when its release date is ? Cheers Jon -----Original Message----- From: Marcus Kuba [mailto:marcus@kuba4u.de] Sent: 21 February 2002 6:37 pm To: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: Adding a real cam to a nova - was: Re: Re: NOVA+encrypted channels... Am 21.02.2002 16:37:13, schrieb "Felix Domke" : >the next step would be to extend this to a CI-interface, but this would be a >bit more complex. Maybe somebody is able to take a PCI->PCMCIA bridge, and >reconnect the redefined lines to the NOVA, which leads to a "dual" PCI card. FYI: Hauppauge already has announced a NOVA-CI. The price incl. remote is something around 180?. The question now is if that version works with the drivers... Greetings, Marcus -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. ***> "WorldSecure " made the following annotations on 02/21/02 19:55:39 ---------------------------------------------------------------------------- -- [INFO] -- Virus Manager: Virus swept by Talbot Underwriting Ltd ============================== No Viruses were detected in this message. ============================================================================ == "WorldSecure " made the following annotations on 02/22/02 09:33:42 ------------------------------------------------------------------------------ Talbot Underwriting Ltd Registered Office: Gracechurch House 55 Gracechurch Street London EC3V 0JP Registered Number: 2202362 England Telephone: 020 7550 3500 Facsimile: 020 7550 3555 For more information about Talbot Underwriting please visit our website at www.talbotuw.com Confidentiality Notice : This message is confidential to the sender and the persons to whom it is addressed and may be protected by legal privilege. Reproduction or publication of the message or its contents without consent is prohibited. If you receive the message in error, please destroy the same and if you could in such case inform the sender of the misdirection, it would be appreciated. [INFO] -- Virus Manager: Virus swept by Talbot Underwriting Ltd ============================== No Viruses were detected in this message. ============================================================================== > ************ -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Feb 22 11:45:46 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 27900 invoked by uid 0); 22 Feb 2002 11:45:46 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 22 Feb 2002 11:45:46 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eE8O-0005VW-00; Fri, 22 Feb 2002 12:45:04 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 22 Feb 2002 12:41:16 +0100 (CET) Received: from [194.145.112.1] (helo=localhost.localdomain) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eE4i-00059M-00 for ; Fri, 22 Feb 2002 12:41:16 +0100 Received: from intmail.nptv.fr (central.nptv.fr [10.0.0.4]) by localhost.localdomain (8.9.3/8.9.3) with SMTP id MAA06960 for ; Fri, 22 Feb 2002 12:04:26 +0100 Message-Id: <200202221104.MAA06960@localhost.localdomain> Received: (qmail 21185 invoked from network); 22 Feb 2002 11:41:15 -0000 Received: from munster.nptv.fr (HELO MUNSTER) (10.0.50.18) by central.nptv.fr with SMTP; 22 Feb 2002 11:41:15 -0000 Date: Fri, 22 Feb 2002 12:43:08 +0100 To: Martin Springer , immo.benjes@philips.com CC: linux-dvb@linuxtv.org, jonathan.foster@philips.com From: Karl ROUSSEAU Subject: [linux-dvb] Re: Proposal for MHP extension Reply-To: krousseau@nptv.fr Organization: NPTV S.A. X-Mailer: Opera 5.12 build 932 X-Priority: 3 (Normal) Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: krousseau@nptv.fr Precedence: bulk X-list: linux-dvb Hi Martin, This will be a great idea but I don't thing it will be possible because of NDA problems. Every company doing MHP STB (even Philips has 2 MHP stacks), have their own piece of code which has a copyright. (mainly C code linked to JAVA using JNI or ...) But there is an issue, we can do a layer (compliant SUN DVB as describe here: http://java.sun.com/products/specformhp) which is linked to the driver dvbd using those DVB PCI cards. With those PCI cards, we can get the TS and generates Java classes files from this DSMCC carousel object to the hard disk, then we can do a bytecode interpretor in C which renders everything over the OSD display of the dvbd driver. I don't think it's a big deal but just pieces of code to stick together and some time to spend on this kind of emulator. Regards. --- Karl ROUSSEAU - JAVA iTV Software Manager NPTV - "Ready for a new 'i' on TV ?" - http://www.nptv.fr Republic Alley - 18 rue du Faubourg du Temple - 75011 PARIS Tel: 33 (0)1 55 28 89 89 - Fax: 33 (0)1 55 28 89 90 21/02/2002 20:30:49, Martin Springer wrote: >immo.benjes@philips.com writes: > >> Hi Jon, >> >> could you write a bit about a 'proposal on how to extend the MHP with your >> BackgroundOrdering. > >Is the Philips MHP stack going open source now? > >Welcome to the list! We are eager to discuss Linux/MHP related issues >with you. > >sincerely >-- >Martin Springer GPG Key-ID 1024D/8EFE7B2F >Rosenthaler Str. 9 ph/ +49 (0)30- 28 30 08 1 >D-10119 Berlin +49 (0)172 - 30 36 70 2 > > >-- >Info: >To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Feb 22 12:39:38 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 10710 invoked by uid 0); 22 Feb 2002 12:39:38 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 22 Feb 2002 12:39:38 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eEyX-00025E-00; Fri, 22 Feb 2002 13:38:57 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 22 Feb 2002 13:36:32 +0100 (CET) Received: from gw-nl5.philips.com ([212.153.235.99]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eEw8-0001j4-00 for ; Fri, 22 Feb 2002 13:36:32 +0100 Received: from smtpscan-nl1.philips.com (localhost.philips.com [127.0.0.1]) by gw-nl5.philips.com with ESMTP id NAA14048 for ; Fri, 22 Feb 2002 13:36:23 +0100 (MET) (envelope-from immo.benjes@philips.com) From: immo.benjes@philips.com Received: from smtpscan-nl1.philips.com(130.139.36.21) by gw-nl5.philips.com via mwrap (4.0a) id xma014045; Fri, 22 Feb 02 13:36:23 +0100 Received: from smtprelay-nl1.philips.com (localhost [127.0.0.1]) by smtpscan-nl1.philips.com (8.9.3/8.8.5-1.2.2m-19990317) with ESMTP id NAA02320 for ; Fri, 22 Feb 2002 13:36:15 +0100 (MET) Received: from hbg001soh.diamond.philips.com (e1soh01.diamond.philips.com [130.143.165.212]) by smtprelay-nl1.philips.com (8.9.3/8.8.5-1.2.2m-19990317) with ESMTP id NAA02186 for ; Fri, 22 Feb 2002 13:36:12 +0100 (MET) To: Subject: [linux-dvb] Re: Proposal for MHP extension Date: Fri, 22 Feb 2002 12:36:07 +0000 Message-ID: X-MIMETrack: Serialize by Router on hbg001soh/H/SERVER/PHILIPS(Release 5.0.5 |September 22, 2000) at 22/02/2002 13:54:55, Serialize complete at 22/02/2002 13:54:55 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: immo.benjes@philips.com Precedence: bulk X-list: linux-dvb Hi, the email was send by accident to this list. Regards Immo On Friday 22 Feb 2002 11:43 am, you wrote: > Hi Martin, > > This will be a great idea but I don't thing it will be possible because of > NDA problems. Every company doing MHP STB (even Philips has 2 MHP stacks), > have their own piece of code which has a copyright. > (mainly C code linked to JAVA using JNI or ...) > > But there is an issue, we can do a layer (compliant SUN DVB as describe > here: http://java.sun.com/products/specformhp) which is linked to the > driver dvbd using those DVB PCI cards. > With those PCI cards, we can get the TS and generates Java classes > files from this DSMCC carousel object to the hard disk, then we can do > a bytecode interpretor in C which renders everything over the OSD display > of the dvbd driver. > I don't think it's a big deal but just pieces of code to stick together and > some time to spend on this kind of emulator. > > Regards. > --- > Karl ROUSSEAU - JAVA iTV Software Manager > NPTV - "Ready for a new 'i' on TV ?" - http://www.nptv.fr > Republic Alley - 18 rue du Faubourg du Temple - 75011 PARIS > Tel: 33 (0)1 55 28 89 89 - Fax: 33 (0)1 55 28 89 90 > > 21/02/2002 20:30:49, Martin Springer wrote: > >immo.benjes@philips.com writes: > >> Hi Jon, > >> > >> could you write a bit about a 'proposal on how to extend the MHP with > >> your BackgroundOrdering. > > > >Is the Philips MHP stack going open source now? > > > >Welcome to the list! We are eager to discuss Linux/MHP related issues > >with you. > > > >sincerely > >-- > >Martin Springer GPG Key-ID 1024D/8EFE7B2F > >Rosenthaler Str. 9 ph/ +49 (0)30- 28 30 08 1 > >D-10119 Berlin +49 (0)172 - 30 36 70 2 > > > > > >-- > >Info: > >To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe > > linux-dvb" as subject. -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Feb 22 15:16:23 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 31194 invoked by uid 0); 22 Feb 2002 15:16:23 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 22 Feb 2002 15:16:23 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eHQI-0006BV-00; Fri, 22 Feb 2002 16:15:46 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 22 Feb 2002 16:11:44 +0100 (CET) Received: from [217.57.106.41] (helo=lasersat.it) by chambertin.convergence.de with smtp (Exim 3.33 #2 ) id 16eHJh-0005eV-00 for ; Fri, 22 Feb 2002 16:08:58 +0100 Received: (qmail 20387 invoked by uid 48); 22 Feb 2002 15:13:45 -0000 Date: 22 Feb 2002 15:13:45 -0000 Message-ID: <20020222151345.20386.qmail@lasersat.it> To: linux-dvb@linuxtv.org Subject: [linux-dvb] 1 card many pc From: scire@libero.it X-Sender: X-Mailer: PHP X-Approved-By: dirk@convergence.de X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: dirk@convergence.de Precedence: bulk X-list: linux-dvb hi all, I have a DVB-S card in a PC,my idea is to send audio/video to other PC with RTP protocol,is this possible?some idea? thanks very much scire IP Mittente: 156.148.2.22 E-mail inviata da http://www.gratismania.tv -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Feb 22 15:26:35 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 31821 invoked by uid 0); 22 Feb 2002 15:26:35 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 22 Feb 2002 15:26:35 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eHa3-0006zo-00; Fri, 22 Feb 2002 16:25:51 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 22 Feb 2002 16:23:38 +0100 (CET) Received: from facade.firsthop.fi ([195.163.185.50] helo=factory.firsthop.fi) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eHXu-0006cr-00 for ; Fri, 22 Feb 2002 16:23:38 +0100 Received: (from smile@localhost) by factory.firsthop.fi (8.9.3/8.9.3) id RAA28071 for linux-dvb@linuxtv.org; Fri, 22 Feb 2002 17:23:04 +0200 Date: Fri, 22 Feb 2002 17:23:03 +0200 From: Lauri Pesonen To: linux-dvb@linuxtv.org Subject: [linux-dvb] <200MHz frequencies Message-ID: <20020222172303.C27562@firsthop.com> Reply-To: lauri.pesonen@firsthop.com Mail-Followup-To: linux-dvb@linuxtv.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: lauri.pesonen@firsthop.com Precedence: bulk X-list: linux-dvb Hi list, A while back Kenneth Falck reported that he's TT-DVB-C card did not tune to frequencies below 200 MHz. Last week I got an answer regarding this issue from TechnoTrend where they acknowledged the problem and this week they said that I could donwload a new TT-PCI-budget card software from their site. I was under the impression that the problem would be hardware related, but apparently it was either software realted or they could do some kind of workaround in software/firmware. The problem is that we (me and Kenneth) are experiencing the same problem with the Linux driver; it won't tune to frequencies below 200MHz. Most LinuxDVB users have not encountered this problem (the same goes for TT) since all DVB bouquets in Germany are located in the higher frequency ranges. I tried to ask TT for some clues what they fixed, but I haven't heard from them since. I also asked them to cooperate with Convergence relating to the driver, but, as I said, I haven't heard from them since. I would really much like to see this problem fixed in the linux driver since 4 out of 7 bouquets in Finland are located below 200MHz. But I don't have any idea where to start fixing this. I'd assume that it's something in the firmware, but I don't really have a clue. Could the driver developers please comment on this? Br, Lauri -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Feb 22 16:02:22 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 13381 invoked by uid 0); 22 Feb 2002 16:02:22 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 22 Feb 2002 16:02:22 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eI8l-0002TI-00; Fri, 22 Feb 2002 17:01:43 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 22 Feb 2002 16:57:57 +0100 (CET) Received: from [10.1.1.69] (helo=rjkm.de ident=root) by chambertin.convergence.de with TLSv1:DES-CBC3-SHA:168 encrypted esmtp (Exim 3.33 #2 ) id 16eHtW-0000Sh-00 for ; Fri, 22 Feb 2002 16:45:58 +0100 Received: (from rjkm@localhost) by rjkm.de (8.12.0.Beta19/8.12.0.Beta19) id g1MFkcxY003807; Fri, 22 Feb 2002 16:46:38 +0100 Message-ID: <15478.26589.424587.495727@draal.metzler> Date: Fri, 22 Feb 2002 16:46:37 +0100 To: lauri.pesonen@firsthop.com Cc: linux-dvb@linuxtv.org from: rjkm@convergence.de Subject: [linux-dvb] <200MHz frequencies In-Reply-To: <20020222172303.C27562@firsthop.com> References: <20020222172303.C27562@firsthop.com> X-Mailer: VM 6.95 under 21.4 (patch 4) "Artificial Intelligence" XEmacs Lucid Mime-Version: 1.0 (generated by tm-edit 1.8) Content-Type: text/plain; charset=US-ASCII X-Approved-By: dirk@convergence.de X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: dirk@convergence.de Precedence: bulk X-list: linux-dvb Lauri Pesonen writes: > A while back Kenneth Falck reported that he's TT-DVB-C card did not tune > to frequencies below 200 MHz. Last week I got an answer regarding this [...] > I would really much like to see this problem fixed in the linux driver > since 4 out of 7 bouquets in Finland are located below 200MHz. But I don't > have any idea where to start fixing this. I'd assume that it's something > in the firmware, but I don't really have a clue. > > Could the driver developers please comment on this? It's probably something in the tuner code. Maybe you only have to adjust some of the values in tuner.c. The SP5659C entry is used for the TT DVB-C cards: {"SP5659C", MITEL, DVBC, 40000000UL, 870000000UL, 62500, 1, 36125000, 174000000UL, 470000000UL, 0xa1, 0x84, 0x81, 0x85}, 174000000 and 47000000 are the boundaries for the 3 frequency bands. 0x84, 0x81 and 0x85 are the values used for the first control register in those bands. Either the boundary values or the control register values (or both) might be wrong. Since I don't have a TT DVB-C card and also no digital channels at low frequencies I cannot really do anything about the problem. Ralph -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Feb 22 19:27:09 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 12277 invoked by uid 0); 22 Feb 2002 19:27:08 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 22 Feb 2002 19:27:08 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eLKv-0006Wu-00; Fri, 22 Feb 2002 20:26:29 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 22 Feb 2002 20:22:19 +0100 (CET) Received: from mail.bieringer.de ([195.226.187.51] helo=titan.bieringer.de) by chambertin.convergence.de with smtp (Exim 3.33 #2 ) id 16eLGt-0006B8-00 for ; Fri, 22 Feb 2002 20:22:19 +0100 Received: (qmail 11114 invoked from network); 22 Feb 2002 19:22:18 -0000 Received: from p5080537f.dip.t-dialin.net (HELO ??) (80.128.83.127) by mail.bieringer.de with SMTP; 22 Feb 2002 19:22:18 -0000 Date: Fri, 22 Feb 2002 20:22:44 +0100 From: Peter Bieringer To: Maillist Linux DVB Subject: [linux-dvb] tuner.h mixup with kernel source tree Message-ID: <48100000.1014405764@localhost> X-Mailer: Mulberry/2.2.0b2 (Linux/x86) X-Echelon: GRU NSA GCHQ CIA Pentagon nuclear war terror anthrax X-URL: http://www.bieringer.de/pb/ X-OS: Linux MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Content-Disposition: inline X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: pb@bieringer.de Precedence: bulk X-list: linux-dvb Hi, while trying to merge the Matrox tuner.* changes with the DVB ones I want to start from a vanilla code. I'll took kernel 2.4.17-0.13 (RHL rawhide) as baseline. Unfortunately, a diff of the DVB tuner.h against the one included in the kernel shows me that the tuner numbers are overlapping, namely: -#define TUNER_TEMIC_PAL_DK 16 -#define TUNER_PHILIPS_NTSC_M 17 -#define TUNER_TEMIC_4066FY5_PAL_I 18 -#define TUNER_TEMIC_4006FN5_MULTI_PAL 19 -#define TUNER_TEMIC_4009FR5_PAL 20 -#define TUNER_TEMIC_4039FR5_NTSC 21 -#define TUNER_TEMIC_4046FM5 22 +#define TUNER_SP5659 16 +#define TUNER_DVBC 17 +#define TUNER_TSA5059 18 +#define TUNER_TSA5522 19 +#define TUNER_TSA5060 20 +#define TUNER_SP5668 21 +#define TUNER_SP5659_C 22 Are the numbers hardcoded used somewhere? Is this a dvb driver design issue? Can I change the DVB tuner numbers easily? I only found references in dvb.c Such interferences aren't well, if dvb driver should go (parially?) into main kernel source tree later. Peter -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Feb 22 22:04:42 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 32716 invoked by uid 0); 22 Feb 2002 22:04:42 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 22 Feb 2002 22:04:42 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eNnP-0006H1-00; Fri, 22 Feb 2002 23:04:03 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 22 Feb 2002 23:01:34 +0100 (CET) Received: from web10105.mail.yahoo.com ([216.136.130.55]) by chambertin.convergence.de with smtp (Exim 3.33 #2 ) id 16eNl0-00063r-00 for ; Fri, 22 Feb 2002 23:01:34 +0100 Message-ID: <20020222220133.62412.qmail@web10105.mail.yahoo.com> Received: from [217.10.196.46] by web10105.mail.yahoo.com via HTTP; Fri, 22 Feb 2002 14:01:33 PST Date: Fri, 22 Feb 2002 14:01:33 -0800 (PST) From: flyer musculitz Subject: [linux-dvb] can someone compile ntuxzap and send it to me? To: linux-dvb@linuxtv.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: musculitz@yahoo.com Precedence: bulk X-list: linux-dvb i have RedHat 7.2 with 2.4.7 kernel and 0.9.2 drivers for DVB. i can't compile ntuxzap even i patched the drivers and copied ctk lib and everithing... So if anybody could send me the executable ntuxzap i thank him in advance :) __________________________________________________ Do You Yahoo!? Yahoo! Sports - Coverage of the 2002 Olympic Games http://sports.yahoo.com -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Feb 22 23:32:01 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 29315 invoked by uid 0); 22 Feb 2002 23:32:01 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 22 Feb 2002 23:32:01 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eP9u-00028m-00; Sat, 23 Feb 2002 00:31:22 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Sat, 23 Feb 2002 00:27:42 +0100 (CET) Received: from varis.cs.tut.fi ([130.230.4.42] helo=cs.tut.fi ident=root) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eP6L-00015W-00 for ; Sat, 23 Feb 2002 00:27:41 +0100 Received: from rotwailer (rotwailer.dmi.tut.fi [130.230.50.27]) by cs.tut.fi (8.8.8/8.8.8) with SMTP id BAA18317 for ; Sat, 23 Feb 2002 01:27:41 +0200 (EET) Message-ID: <000a01c1bc4c$17bf8b90$1b32e682@rotwailer> From: "Aurelian Pop" To: "LinuxTV" Subject: [linux-dvb] VIRUS WARNING!!! Date: Sat, 23 Feb 2002 01:25:54 -0800 MIME-Version: 1.0 Content-type: text/plain X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: puiu@cs.tut.fi Precedence: bulk X-list: linux-dvb IF YOU'RE A WINDOWS USER!!! DO NOT OPEN THE ATTACHEMENT FROM THE PROBLEMS WITH CARD DETECTION MAIL!!! IT'S A TROIAN VIRUS!!! Aurelian -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Sat Feb 23 00:04:39 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 7008 invoked by uid 0); 23 Feb 2002 00:04:39 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 23 Feb 2002 00:04:39 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16ePfU-0003eB-00; Sat, 23 Feb 2002 01:04:00 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Sat, 23 Feb 2002 01:01:53 +0100 (CET) Received: from web14912.mail.yahoo.com ([216.136.225.248]) by chambertin.convergence.de with smtp (Exim 3.33 #2 ) id 16ePdR-0003RB-00 for ; Sat, 23 Feb 2002 01:01:53 +0100 Message-ID: <20020223000151.38197.qmail@web14912.mail.yahoo.com> Received: from [62.251.93.151] by web14912.mail.yahoo.com via HTTP; Sat, 23 Feb 2002 00:01:51 GMT Date: Sat, 23 Feb 2002 00:01:51 +0000 (GMT) From: =?iso-8859-1?q?A=20rno?= Subject: [linux-dvb] Linux DVB Aston Seca 1.05 Module support To: linux-dvb@linuxtv.org MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: nvana_30@yahoo.com Precedence: bulk X-list: linux-dvb Hello, Anyone got the Aston 1.05 Seca module working well under Linux ? I've tried several setups but nothing worked well for the dutch channels, all I get is a black screen when I try an encrypted channel. Menus of VDR 0.98 get weird colors... Btw my setup works fine in Winslows... Thanks, Arno __________________________________________________ Do You Yahoo!? Everything you'll ever need on one web page from News and Sport to Email and Music Charts http://uk.my.yahoo.com -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Sat Feb 23 00:41:01 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 17048 invoked by uid 0); 23 Feb 2002 00:41:01 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 23 Feb 2002 00:41:01 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eQEg-0005Fw-00; Sat, 23 Feb 2002 01:40:22 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Sat, 23 Feb 2002 01:37:22 +0100 (CET) Received: from varis.cs.tut.fi ([130.230.4.42] helo=cs.tut.fi ident=root) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eQBm-000506-00 for ; Sat, 23 Feb 2002 01:37:22 +0100 Received: from rotwailer (rotwailer.dmi.tut.fi [130.230.50.27]) by cs.tut.fi (8.8.8/8.8.8) with SMTP id CAA22634 for ; Sat, 23 Feb 2002 02:37:21 +0200 (EET) Message-ID: <001201c1bc55$d09e1e70$1b32e682@rotwailer> From: "Aurelian Pop" To: "LinuxTV" Subject: [linux-dvb] SORRY.. Date: Sat, 23 Feb 2002 02:35:24 -0800 MIME-Version: 1.0 Content-type: text/plain X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: puiu@cs.tut.fi Precedence: bulk X-list: linux-dvb Hello List, I have received about an hour ago a mail containing a trojan virus. The subject was [linux dvb]... and I thought it came to me from the list. For a moment I forgot that the list doesn't allow attachements, and that's why I send that virus warning mail. So I apologize for that :))) It's just that I got virused and I wanted to be fast in preventing you from getting it also... Now I'm clean :))) Best Regards, Aurelian -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Sat Feb 23 06:09:21 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 27948 invoked by uid 0); 23 Feb 2002 06:09:21 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 23 Feb 2002 06:09:21 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eVMR-0001tH-00; Sat, 23 Feb 2002 07:08:43 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Sat, 23 Feb 2002 07:05:36 +0100 (CET) Received: from [212.84.236.169] (helo=skunk.directfb.org) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eVJQ-0001cg-00 for ; Sat, 23 Feb 2002 07:05:36 +0100 Received: by directfb.org via sendmail from stdin id (Debian Smail3.2.0.114) for linux-dvb@linuxtv.org; Sat, 23 Feb 2002 07:04:36 +0100 (CET) Date: Sat, 23 Feb 2002 07:04:36 +0100 From: Denis Oliver Kropp To: Aurelian Pop Cc: LinuxTV Subject: [linux-dvb] Re: SORRY.. Message-ID: <20020223060436.GA6411@skunk.convergence.de> Reply-To: Denis Oliver Kropp References: <001201c1bc55$d09e1e70$1b32e682@rotwailer> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <001201c1bc55$d09e1e70$1b32e682@rotwailer> User-Agent: Mutt/1.3.27i X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: dok@directfb.org Precedence: bulk X-list: linux-dvb Quoting Aurelian Pop (puiu@cs.tut.fi): > > Hello List, > > I have received about an hour ago a mail containing a trojan virus. > The subject was [linux dvb]... and I thought it came to me from the list. > For a moment I forgot that the list doesn't allow attachements, and that's why I send that virus warning mail. So I apologize for that :))) > It's just that I got virused and I wanted to be fast in preventing you from getting it also... > Now I'm clean :))) I also got this virus as a reply to a mail from me. But my mutt has no builtin wine ;) -- Best regards, Denis Oliver Kropp .------------------------------------------. | DirectFB - Hardware accelerated graphics | | http://www.directfb.org/ | "------------------------------------------" convergence integrated media GmbH -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Sat Feb 23 09:10:20 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 21164 invoked by uid 0); 23 Feb 2002 09:10:20 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 23 Feb 2002 09:10:20 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eYBa-0000vD-00; Sat, 23 Feb 2002 10:09:42 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Sat, 23 Feb 2002 10:06:59 +0100 (CET) Received: from cartero.austria.eu.net ([193.154.160.153]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eY8x-0000hv-00 for ; Sat, 23 Feb 2002 10:06:59 +0100 Received: from red.barndance.at (dialup135.d2-Bst1.Riii.AT.KPNQwest.net [193.154.148.135]) by cartero.austria.eu.net (8.12.1/8.12.1) with ESMTP id g1N97ibB010743; Sat, 23 Feb 2002 10:07:46 +0100 (MET) Received: from EUnet.at (localhost [127.0.0.1]) by red.barndance.at (8.11.3/8.11.3/SuSE Linux 8.11.1-0.5) with ESMTP id g1N964L01465; Sat, 23 Feb 2002 10:06:04 +0100 Sender: jando@EUnet.at Message-ID: <3C775B7C.7938E30@EUnet.at> Date: Sat, 23 Feb 2002 10:06:04 +0100 From: Johann Andorfer X-Mailer: Mozilla 4.77 [de] (X11; U; Linux 2.4.4-4GB i686) X-Accept-Language: German/Austria, de-AU, en MIME-Version: 1.0 To: Munaut Sylvain , linux-dvb@linuxtv.org Subject: [linux-dvb] Re: Infrared and CI References: <3C73DA90.8FA702EF@246tNt.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: jando@EUnet.at Precedence: bulk X-list: linux-dvb Munaut Sylvain wrote: > > Hello > > I have a hauppauge wintvdvb. With it i have a IR receiver ( shipped > withe the card and that is plugged on the Card ). And a CI interface > with a CAM. When a don't plug in the CI into the card, the IR is working > but when i plug the CI into the card, it doesn't work anymore .... What > should i do ??? > Hallo I had the same problem (Hauppauge DVBs Rev. 2.1, CI-Interface PCI slot version). If you have a CI-Interface for the 3 1/2 " floppy slot, there is a jumper on the CI-Interface to select where you plug in the IR-receiver. On the PCI slot version you have to connect the IR receiver to the CI-Interface. Therefor you need a adapter from 2,5 mm to 3,5 mm. If you don't find one by your dealer, you can get one for free from Hauppauge. MfG Johann Andorfer -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Sat Feb 23 09:46:20 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 2645 invoked by uid 0); 23 Feb 2002 09:46:20 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 23 Feb 2002 09:46:20 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eYkH-0002WP-00; Sat, 23 Feb 2002 10:45:33 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Sat, 23 Feb 2002 10:43:02 +0100 (CET) Received: from riker.skynet.be ([195.238.3.132]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eYhq-0002JM-00 for ; Sat, 23 Feb 2002 10:43:02 +0100 Received: from pc-stvincent.246tNt.com (80-200-145-217.adsl.powered-by.skynet.be [80.200.145.217]) by riker.skynet.be (8.11.6/8.11.6/Skynet-OUT-2.16) with ESMTP id g1N9h0c24948 for ; Sat, 23 Feb 2002 10:43:01 +0100 (MET) (envelope-from ) Message-Id: <5.1.0.14.2.20020223103525.00a55e50@totophe.com> X-Sender: tnt@totophe.com (Unverified) X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Sat, 23 Feb 2002 10:36:42 +0100 To: linux-dvb@linuxtv.org From: Munaut Sylvain Subject: [linux-dvb] Infrared and CI In-Reply-To: <3C775B7C.7938E30@EUnet.at> References: <3C73DA90.8FA702EF@246tNt.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: tnt@246tNt.com Precedence: bulk X-list: linux-dvb Tanx every body for all your answer, i've connected the IR receiver on the CI and it works perfectly ! Munaut Sylvain -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Sat Feb 23 09:49:48 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 2674 invoked by uid 0); 23 Feb 2002 09:49:48 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 23 Feb 2002 09:49:48 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eYnm-0002n0-00; Sat, 23 Feb 2002 10:49:10 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Sat, 23 Feb 2002 10:47:32 +0100 (CET) Received: from riker.skynet.be ([195.238.3.132]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eYmB-0002aO-00 for ; Sat, 23 Feb 2002 10:47:31 +0100 Received: from pc-stvincent.246tNt.com (80-200-145-217.adsl.powered-by.skynet.be [80.200.145.217]) by riker.skynet.be (8.11.6/8.11.6/Skynet-OUT-2.16) with ESMTP id g1N9lSc29998 for ; Sat, 23 Feb 2002 10:47:28 +0100 (MET) (envelope-from ) Message-Id: <5.1.0.14.2.20020223103737.00aedea0@totophe.com> X-Sender: tnt@totophe.com (Unverified) X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Sat, 23 Feb 2002 10:41:10 +0100 To: linux-dvb@linuxtv.org From: Munaut Sylvain Subject: [linux-dvb] Re: Linux DVB Aston Seca 1.05 Module support In-Reply-To: <20020223000151.38197.qmail@web14912.mail.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: tnt@246tNt.com Precedence: bulk X-list: linux-dvb I have a AstonCrypt 1.05 module and it works. But when i load the module, i have to check in the sys log if has detected the aston crypt module for that just type dmesg and look for "ASTON" on the 5 or 10 last lines. if you can't see it, wait 30 sec ( sometime it's slow to load ... ) and retry dmesg If you don't see it, unload all the modules. ( make rmmod ), wait 10 sec and reload ( make insmod ). Don't do do a "make reload", it never worked for me .. Munaut Sylvain -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Sat Feb 23 09:56:33 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 3330 invoked by uid 0); 23 Feb 2002 09:56:33 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 23 Feb 2002 09:56:33 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eYuJ-00039D-00; Sat, 23 Feb 2002 10:55:55 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Sat, 23 Feb 2002 10:54:06 +0100 (CET) Received: from riker.skynet.be ([195.238.3.132]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eYsX-0002vM-00 for ; Sat, 23 Feb 2002 10:54:05 +0100 Received: from pc-stvincent.246tNt.com (80-200-145-217.adsl.powered-by.skynet.be [80.200.145.217]) by riker.skynet.be (8.11.6/8.11.6/Skynet-OUT-2.16) with ESMTP id g1N9s4c07842 for ; Sat, 23 Feb 2002 10:54:04 +0100 (MET) (envelope-from ) Message-Id: <5.1.0.14.2.20020223104650.02d7bb20@totophe.com> X-Sender: tnt@totophe.com (Unverified) X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Sat, 23 Feb 2002 10:47:45 +0100 To: linux-dvb@linuxtv.org From: Munaut Sylvain Subject: [linux-dvb] Re: 1 card many pc In-Reply-To: <20020222151345.20386.qmail@lasersat.it> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: tnt@246tNt.com Precedence: bulk X-list: linux-dvb Sure it's possible. Try dvbstream. To find it, look in the news page of linuxtv.org At 15:13 22/02/2002 +0000, you wrote: >hi all, >I have a DVB-S card in a PC,my idea is to send audio/video to other PC >with RTP protocol,is this possible?some idea? >thanks very much >scire > >IP Mittente: 156.148.2.22 >E-mail inviata da http://www.gratismania.tv > > >-- >Info: >To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe >linux-dvb" as subject. -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Sat Feb 23 10:26:24 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 12970 invoked by uid 0); 23 Feb 2002 10:26:23 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 23 Feb 2002 10:26:23 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eZN9-0004qL-00; Sat, 23 Feb 2002 11:25:43 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Sat, 23 Feb 2002 11:23:23 +0100 (CET) Received: from postfix2-2.free.fr ([213.228.0.140]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eZKt-0004bB-00 for ; Sat, 23 Feb 2002 11:23:23 +0100 Received: from wanadoo.fr (bordeaux-1-a7-86-165.dial.proxad.net [62.147.86.165]) by postfix2-2.free.fr (Postfix) with ESMTP id 7B0715F86D for ; Sat, 23 Feb 2002 11:23:22 +0100 (CET) Sender: root@free.fr Message-ID: <3C776D4A.E9964757@wanadoo.fr> Date: Sat, 23 Feb 2002 11:22:02 +0100 From: Patrick GUENEAU X-Mailer: Mozilla 4.76 [en] (X11; U; Linux 2.4.10 i686) X-Accept-Language: en MIME-Version: 1.0 To: "linux-dvb@linuxtv.org" Subject: [linux-dvb] Re : Linux DVB Aston Seca 1.05 Module support References: <20020223000151.38197.qmail@web14912.mail.yahoo.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: pgueneau@wanadoo.fr Precedence: bulk X-list: linux-dvb Hello Arno, I am using this shell script : ===================================== #/bin/bash # cd /home/dvb/DVB/driver rmmod dvb make insmod sleep 5 # # tail -8 /var/log/messages | grep ASTON > /dev/null ret=$? while [ $ret -ne 0 ] ; do rmmod dvb insmod dvb.o init_chan=2 pids_off=0 sleep 15 #/home/dvb/bin/szap 'C+' tail -8 /var/log/messages | grep ASTON > /dev/null ret=$? done # ====================================== And it works very well ; sometimes it needs some minutes before i have ASTON in log file. Patrick. A rno wrote: > > Hello, > > Anyone got the Aston 1.05 Seca module working well > under Linux ? > > I've tried several setups but nothing worked well for > the dutch channels, all I get is a black screen when I > try an encrypted channel. Menus of VDR 0.98 get weird > colors... > > Btw my setup works fine in Winslows... > > Thanks, > > Arno > > __________________________________________________ > Do You Yahoo!? > Everything you'll ever need on one web page > from News and Sport to Email and Music Charts > http://uk.my.yahoo.com > > -- > Info: > To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Sat Feb 23 12:33:38 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 23711 invoked by uid 0); 23 Feb 2002 12:33:38 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 23 Feb 2002 12:33:38 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16ebMF-0003P9-00; Sat, 23 Feb 2002 13:32:55 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Sat, 23 Feb 2002 13:29:52 +0100 (CET) Received: from facade.firsthop.fi ([195.163.185.50] helo=factory.firsthop.fi) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16ebJI-0002MJ-00 for ; Sat, 23 Feb 2002 13:29:52 +0100 Received: (from smile@localhost) by factory.firsthop.fi (8.9.3/8.9.3) id OAA21101; Sat, 23 Feb 2002 14:28:49 +0200 Date: Sat, 23 Feb 2002 14:28:49 +0200 From: Lauri Pesonen To: rjkm@convergence.de, linux-dvb@linuxtv.org Subject: [linux-dvb] Re: <200MHz frequencies Message-ID: <20020223142849.B21036@firsthop.com> Reply-To: lauri.pesonen@firsthop.com Mail-Followup-To: rjkm@convergence.de, linux-dvb@linuxtv.org References: <20020222172303.C27562@firsthop.com> <15478.26589.424587.495727@draal.metzler> <20020222194505.A29001@firsthop.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20020222194505.A29001@firsthop.com>; from lauri.pesonen@firsthop.com on Fri, Feb 22, 2002 at 07:45:06PM +0200 X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: lauri.pesonen@firsthop.com Precedence: bulk X-list: linux-dvb On Fri, Feb 22, 2002 at 07:45:06PM +0200, Lauri Pesonen wrote: > On Fri, Feb 22, 2002 at 04:46:37PM +0100, rjkm@convergence.de wrote: > > > > It's probably something in the tuner code. > > Maybe you only have to adjust some of the values in tuner.c. > > The SP5659C entry is used for the TT DVB-C cards: > > > > > > {"SP5659C", MITEL, DVBC, > > 40000000UL, 870000000UL, 62500, 1, 36125000, > > 174000000UL, 470000000UL, 0xa1, 0x84, 0x81, 0x85}, > > > > > > 174000000 and 47000000 are the boundaries for the 3 frequency bands. > > 0x84, 0x81 and 0x85 are the values used for the first control register > > in those bands. Either the boundary values or the control register > > values (or both) might be wrong. > > > > Actually looking at the numbers of the limits, I'm guessing that the three > bands are between the limits. The four bouquets that I'm missing are 146, > 154, 162 and 170 MHz. So I'll try lowering the lower limit to below > 146000000 and see what happens. I'll let you know how it went. I changed the lower value (174000000) to 140000000UL. Now I can tune to all bouquets here in Finland! Peoblem solved. Thanks Ralph for your swifty response! I don't know what the limits should be in the driver, but I would really appreciate it if you could change the lower limit to 140MHz at least. This way the finnish users would not have to patch the driver after every update. There's been a lot of interest in finland for DVB-C PCI cards. Unfortunately it is extremely hard to get a DVB-C card from Finland since TT does not have so many resellers and Siemens won't sell to Finland. But I think the situation will change in the near future. After that I would assume that both the DVB driver and VDR will be very popular here in Finland! Br, Lauri -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Sat Feb 23 12:43:09 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 24142 invoked by uid 0); 23 Feb 2002 12:43:09 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 23 Feb 2002 12:43:09 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16ebVW-00041j-00; Sat, 23 Feb 2002 13:42:30 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Sat, 23 Feb 2002 13:40:43 +0100 (CET) Received: from rztsun.rz.tu-harburg.de ([134.28.200.14]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16ebTn-0003mk-00 for ; Sat, 23 Feb 2002 13:40:43 +0100 Received: from apollo (root@erasmus.rz.tu-harburg.de [134.28.6.100]) by rztsun.rz.tu-harburg.de (8.9.0/8.8.8) with ESMTP id NAA10412 for ; Sat, 23 Feb 2002 13:40:42 +0100 (MET) From: "Marc Sowen" To: Subject: [linux-dvb] AW: Re: <200MHz frequencies Date: Sat, 23 Feb 2002 13:40:55 +0100 Organization: Hamburg University of Technology Message-ID: <000001c1bc67$56aac4d0$0101230a@apollo> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.2616 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal In-Reply-To: <20020223142849.B21036@firsthop.com> X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: marc.sowen@tu-harburg.de Precedence: bulk X-list: linux-dvb Hi, > There's been a lot of interest in finland for DVB-C PCI > cards. Unfortunately it is extremely hard to get a DVB-C card > from Finland since > TT does not have so many resellers and Siemens won't sell to > Finland. But I found a new distributor, which seems to ship devices all over europe. They also sell the Budget-Version of the C and T Version. http://www.satland-shop.de Hope this helps. :) Regards, Marc -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Sat Feb 23 14:30:07 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 26667 invoked by uid 0); 23 Feb 2002 14:30:07 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 23 Feb 2002 14:30:07 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16edAy-0000fR-00; Sat, 23 Feb 2002 15:29:24 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Sat, 23 Feb 2002 15:25:36 +0100 (CET) Received: from community4.interfree.it ([213.158.72.34]) by chambertin.convergence.de with smtp (Exim 3.33 #2 ) id 16ed7I-0000O2-00 for ; Sat, 23 Feb 2002 15:25:36 +0100 Received: (qmail 4912 invoked from network); 23 Feb 2002 14:25:22 -0000 Received: from unknown (HELO Esky?Pastore.roma.alespazio.it) (213.213.58.126) by mail.interfree.it with SMTP; 23 Feb 2002 14:25:22 -0000 Message-ID: <000601c1913e$06764a60$7e3ad5d5@Esky_Pastore.roma.alespazio.it> From: "Gaetano Pastore" To: Subject: [linux-dvb] Service Identifier (SID) Date: Sun, 30 Dec 2001 15:26:44 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 4.72.3110.5 X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3 X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: gpastore@interfree.it Precedence: bulk X-list: linux-dvb Hello, it is not clear to me the usage of the Service_ID within a DVB receiver. Is it mandatory to use SID to filter the information flows. In my understunding PIDs are the only identifiers that I need to filter Information flows. Thanks for the clarifications Gaetano Pastore -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Sat Feb 23 15:48:05 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 21803 invoked by uid 0); 23 Feb 2002 15:48:05 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 23 Feb 2002 15:48:05 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eeOQ-0004kL-00; Sat, 23 Feb 2002 16:47:22 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Sat, 23 Feb 2002 16:41:39 +0100 (CET) Received: from postfix2-2.free.fr ([213.228.0.140]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eeIt-0004SN-00 for ; Sat, 23 Feb 2002 16:41:39 +0100 Received: from plexxus (nas-cbv-1-131-7.dial.proxad.net [62.147.131.7]) by postfix2-2.free.fr (Postfix) with SMTP id 18DC85F82C for ; Sat, 23 Feb 2002 16:41:38 +0100 (CET) Message-ID: <000901c1bc80$96155220$152ea8c0@plexxus> From: "Plexxus" To: "[linux-dvb]" Subject: [linux-dvb] Make insmod produce unresolved symbol errors - Need help Date: Sat, 23 Feb 2002 16:41:38 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: plexxus@free.fr Precedence: bulk X-list: linux-dvb Hi all, I have a RedHat v7.2beta version I'm trying to install my Hauppauge DVB-s card. Make works perfectly (siemens_dvb-0.9.4 driver) Make insmod produces this: ------------------------------------------------ /usr/src/linux/scripts/pathdown.sh: TOPDIR: parameter null or not set ./makedev.napi make make[1]: Entre dans le répertoire `/home/plexxus/dvb/DVB/driver' DIR=`pwd`; (cd /usr/src/linux; make SUBDIRS=$DIR modules) make[2]: Entre dans le répertoire `/usr/src/linux-2.4.7-2' make -C /home/plexxus/dvb/DVB/driver CFLAGS="-D__KERNEL__ -I/usr/src/linux-2.4.7-2/include -Wall -Wstrict-prototy pes -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -Wno-unused -pipe -mpreferred-stack-boundary=2 -march=i686 -fno-merge-const ants -DMODULE -DMODVERSIONS -include /usr/src/linux-2.4.7-2/include/linux/modversions.h" MAKING_MODULES=1 modules make[3]: Entre dans le répertoire `/home/plexxus/dvb/DVB/driver' make[3]: Rien à faire pour `modules'. make[3]: Quitte le répertoire `/home/plexxus/dvb/DVB/driver' make[2]: Quitte le répertoire `/usr/src/linux-2.4.7-2' make[1]: Quitte le répertoire `/home/plexxus/dvb/DVB/driver' ( \ insmod dvbdev.o; \ insmod dvb_net.o; \ insmod i2c-core; \ insmod videodev; \ insmod dvb_filter.o; \ insmod dmxdev.o; \ insmod VES1893.o; \ insmod VES1820.o; \ insmod L64781.o; \ insmod SP8870.o debug=1; \ insmod tda8083.o; \ insmod stv0299.o; \ insmod tuner.o; \ insmod saa7146_core.o mode=0; \ insmod saa7146_v4l.o; \ insmod dvb_demux.o; \ insmod dvb_frontend.o; \ insmod dvb.o init_chan=2 pids_off=0; \ ) dvb_net.o: unresolved symbol __global_sti insmod: a module named i2c-core already exists Using /lib/modules/2.4.7-2/kernel/drivers/i2c/i2c-core.o insmod: a module named videodev already exists Using /lib/modules/2.4.7-2/kernel/drivers/media/video/videodev.o L64781.o: unresolved symbol kernel_flag insmod: a module named tuner already exists dvb_frontend.o: unresolved symbol kernel_flag dvb.o: unresolved symbol dvb_frontend_poll dvb.o: unresolved symbol dvb_net_add_if dvb.o: unresolved symbol dvb_frontend_get_event dvb.o: unresolved symbol dvb_net_remove_if dvb.o: unresolved symbol kernel_flag dvb.o: unresolved symbol dvb_frontend_stop dvb.o: unresolved symbol dvb_frontend_init dvb.o: unresolved symbol dvb_net_release dvb.o: unresolved symbol dvb_frontend_demod_command dvb.o: unresolved symbol dvb_frontend_exit dvb.o: unresolved symbol dvb_net_init dvb.o: unresolved symbol dvb_frontend_tune make: *** [insmod] Erreur 1 ------------------------------------------------ My knowledge of Linux is limited :-( Can you please, help me ?! TIA -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Sun Feb 24 12:47:10 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 9951 invoked by uid 0); 24 Feb 2002 12:47:09 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 24 Feb 2002 12:47:09 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16ey2k-0000hO-00; Sun, 24 Feb 2002 13:46:18 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Sun, 24 Feb 2002 13:38:13 +0100 (CET) Received: from mailout01.sul.t-online.com ([194.25.134.80]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16ehTm-0005QK-00 for ; Sat, 23 Feb 2002 20:05:06 +0100 Received: from fwd09.sul.t-online.de by mailout01.sul.t-online.com with smtp id 16ehSk-0002zc-01; Sat, 23 Feb 2002 20:04:02 +0100 Received: from dh3mb.ampr.org (520062039130-0001@[80.132.90.122]) by fmrl09.sul.t-online.com with esmtp id 16ehSa-1PgOtkC; Sat, 23 Feb 2002 20:03:52 +0100 Date: Sat, 23 Feb 2002 21:07:49 +0100 (CET) From: Johann Hanne X-X-Sender: To: Subject: [linux-dvb] black borders in xawtv Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-Sender: 520062039130-0001@t-dialin.net X-Approved-By: dirk@convergence.de X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: dirk@convergence.de Precedence: bulk X-list: linux-dvb Hi folks, i'm still fiddling around with my linux based video recorder. After having found out how to get my nvidia-video-board to give me a nice PAL overscan signal (http://sf.net/projects/nv-tv-out), I decided to not use the composite out of the DVB board but the svhs out of the graphics board. DVD playback already works wonderfully, but I have problems with the DVB stuff. I'm using xawtv just for telling the hardware to put an overlay from the DVB board on the X display - after quitting xawtv, the overlay still works. But the overlay region is not completely filled up with the TV picture, there are borders at the left, at the right and at the bottom of the overlay region. When taking a screenshot with xawtv, I get a 768x576 picture (PAL size). When examinig it with a picture viewer, the left border is about 14 pixels, the right border is about 12 pixels and the bottom border is about 3 pixels. Where do these borders come from? Is it a DVB driver, v4l or xawtv problem? Is there a solution for getting around this problem? Is there a way to put the overlay on the X display without an application like xawtv? Thanks, Jonny -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Sun Feb 24 13:26:45 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 20426 invoked by uid 0); 24 Feb 2002 13:26:45 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 24 Feb 2002 13:26:45 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eyfE-0002Qm-00; Sun, 24 Feb 2002 14:26:04 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Sun, 24 Feb 2002 14:23:58 +0100 (CET) Received: from postfix1-2.free.fr ([213.228.0.130]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16eydC-0002Ag-00 for ; Sun, 24 Feb 2002 14:23:58 +0100 Received: from toulouse-1-a7-32-45.dial.proxad.net (toulouse-1-a7-32-45.dial.proxad.net [62.147.32.45]) by postfix1-2.free.fr (Postfix) with ESMTP id 7250EAB120; Sun, 24 Feb 2002 14:23:53 +0100 (CET) Date: Sun, 24 Feb 2002 14:24:19 +0100 (CET) From: pguiral X-X-Sender: pguiral@debian To: Johann Hanne Cc: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: black borders in xawtv In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: pguiral@free.fr Precedence: bulk X-list: linux-dvb On Sat, 23 Feb 2002, Johann Hanne wrote: > found out how to get my nvidia-video-board to give me a nice PAL overscan > signal (http://sf.net/projects/nv-tv-out), I decided to not use the > composite out of the DVB board but the svhs out of the graphics board. DVD > playback already works wonderfully, but I have problems with the DVB > stuff. > > Is there a way to put the overlay on the X display without an application > like xawtv? > > Thanks, Jonny Maybe you can try gVideo. gVideo can use overlay, work with fullscreen Work fine with an S3 Inc. 86c368 [Trio 3D/2X] You can see a screenshot at http://pguiral.free.fr/images/screenshots/gvideo/gvideo3.jpg Pierre. -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Sun Feb 24 20:40:07 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 31372 invoked by uid 0); 24 Feb 2002 20:40:07 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 24 Feb 2002 20:40:07 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16f5QW-0006am-00; Sun, 24 Feb 2002 21:39:20 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Sun, 24 Feb 2002 21:28:59 +0100 (CET) Received: from mailout07.sul.t-online.com ([194.25.134.83]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16f5GU-0005E0-00 for ; Sun, 24 Feb 2002 21:28:59 +0100 Received: from fwd02.sul.t-online.de by mailout07.sul.t-online.com with smtp id 16f54e-00057Y-0G; Sun, 24 Feb 2002 21:16:44 +0100 Received: from grobi.holtschneider.com (320026213848-0001@[80.135.95.195]) by fmrl02.sul.t-online.com with smtp id 16f54V-1NKNvcC; Sun, 24 Feb 2002 21:16:35 +0100 Received: (qmail 20706 invoked from network); 24 Feb 2002 19:16:33 -0000 Received: from kruemelmonster.holtschneider.com (HELO kruemelmonster) (212.28.232.34) by grobi.holtschneider.com with SMTP; 24 Feb 2002 19:16:33 -0000 Message-ID: <001a01c1bd67$bf678c00$22e81cd4@kruemelmonster> From: "Henning Holtschneider" To: References: <5.1.0.14.1.20020218094009.00a04a80@mail-host.pcmsgroup.com> Subject: [linux-dvb] How to CA support in current driver? (was: Re: Re: OSD problems investigated) Date: Sun, 24 Feb 2002 20:16:23 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 X-Sender: 320026213848-0001@t-dialin.net X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: hh@holtschneider.com Precedence: bulk X-list: linux-dvb ----- Original Message ----- From: "John Williams" To: Sent: Monday, February 18, 2002 10:41 AM Subject: [linux-dvb] Re: OSD problems investigated > You might like to investigate the new code to read and write the CI that > has appeared in the latest driver versions (0.9.4 and later). It is > undocumented, but I suppose it is doing the same as my code was trying to > do. Perhaps Convergence have fixed the CI support in their firmware; if so, > then I'll be the first to throw away what I've done and use their code. I'm currently trying to use the new code, but I don't know how to do it right. I haven't done any DVB programming before so please be gentle with me if I'm doing something fundamentally wrong here ;-) If I understand correctly, I have to send the Program Number to the CA-Interface to start decrypting a program stream. How do I do this? The driver code in dvb.c just reads: [dvb.c lines 4154ff] case CA_SEND_MSG: break; This does nothing, so how do I get a message sent to the CA system? Here is my "work in progress" patch against VDR 0.99: --- dvbapi.c.orig Sun Feb 24 18:15:46 2002 +++ dvbapi.c Sun Feb 24 20:09:18 2002 @@ -48,6 +48,7 @@ #define DEV_OST_DEMUX "/dev/ost/demux" #define DEV_OST_VIDEO "/dev/ost/video" #define DEV_OST_AUDIO "/dev/ost/audio" +#define DEV_OST_CA "/dev/ost/ca" // The size of the array used to buffer video data: // (must be larger than MINVIDEODATA - see remux.h) @@ -3262,6 +3263,24 @@ if (fd_audio >= 0) CHECK(ioctl(fd_audio, AUDIO_SET_AV_SYNC, true)); } + + // hh + if (Ca) { + ca_msg_t msg; + if(fd_ca >= 0) + close(fd_ca); + fd_ca = OstOpen(DEV_OST_CA, 0, O_RDWR); + if (fd_ca >= 0) { + esyslog(LOG_INFO, "sending Pnr %d to CA", Pnr); + msg.type = 0xfffe; + msg.index = Pnr; + CHECK(ioctl(fd_ca, CA_SEND_MSG, &msg)); + close(fd_ca); + fd_ca = -1; + } else { + esyslog(LOG_ERR, "Error: could not open CA on card %d", Ca); + } + } if (this == PrimaryDvbApi && siProcessor) siProcessor->SetCurrentServiceID(Pnr); --- dvbapi.h.orig Sun Feb 24 20:13:50 2002 +++ dvbapi.h Sun Feb 24 20:13:06 2002 @@ -26,6 +26,7 @@ #include #include #include +#include #include #include "dvbosd.h" @@ -89,7 +90,7 @@ friend class cTransferBuffer; private: FrontendType frontendType; - int fd_osd, fd_frontend, fd_sec, fd_dvr, fd_audio, fd_video, fd_demuxa1, fd_demuxa2, fd_demuxd1, fd_demuxd2, fd_demuxv, fd_demuxt; + int fd_osd, fd_frontend, fd_sec, fd_dvr, fd_audio, fd_video, fd_demuxa1, fd_demuxa2, fd_demuxd1, fd_demuxd2, fd_demuxv, fd_demuxt, fd_ca; int vPid, aPid1, aPid2, dPid1, dPid2; bool SetPid(int fd, dmxPesType_t PesType, int Pid, dmxOutput_t Output); bool SetVpid(int Vpid, dmxOutput_t Output) { return SetPid(fd_demuxv, DMX_PES_VIDEO, Vpid, Output); } Thanks, hh -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Mon Feb 25 00:05:16 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 2106 invoked by uid 0); 25 Feb 2002 00:05:16 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 25 Feb 2002 00:05:16 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16f8d4-0008Lf-00; Mon, 25 Feb 2002 01:04:30 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Mon, 25 Feb 2002 00:58:45 +0100 (CET) Received: from mail.gmx.net ([213.165.64.20]) by chambertin.convergence.de with smtp (Exim 3.33 #2 ) id 16f8XV-0007Hv-00 for ; Mon, 25 Feb 2002 00:58:45 +0100 Received: (qmail 6517 invoked by uid 0); 24 Feb 2002 23:58:14 -0000 Received: from unknown (HELO localhost) (194.162.158.24) by mail.gmx.net (mp015-rz3) with SMTP; 24 Feb 2002 23:58:14 -0000 Received: by localhost (Postfix, from userid 1002) id E16382A89B; Mon, 25 Feb 2002 00:57:13 +0100 (CET) Received: from localhost (localhost [127.0.0.1]) by localhost (Postfix) with ESMTP id C0C722A89A for ; Mon, 25 Feb 2002 00:57:13 +0100 (CET) Date: Mon, 25 Feb 2002 00:57:13 +0100 (CET) From: Martin aus Mainz X-Sender: martyausmainz@www.marty44.net To: linux-dvb@linuxtv.org Subject: [linux-dvb] DVB-C Analog module support? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: martyausmainz@gmx.de Precedence: bulk X-list: linux-dvb Hello to all, first: great driver and software (exspecially vdr) I have a Siemens DVB-Cable with the analog module. Is there support for this module planned? (driver and vdr) Is there any programm, that can search for channel, so I don't need to use the channel.conf.cable, that is in the package? thx a lot marty sorry for the bad english -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Mon Feb 25 00:17:34 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 6898 invoked by uid 0); 25 Feb 2002 00:17:33 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 25 Feb 2002 00:17:33 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16f8p0-0000KR-00; Mon, 25 Feb 2002 01:16:50 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Mon, 25 Feb 2002 01:14:56 +0100 (CET) Received: from smtp02.web.de ([217.72.192.151] helo=smtp.web.de) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16f8nA-00006h-00 for ; Mon, 25 Feb 2002 01:14:56 +0100 Received: from [217.82.228.41] (helo=gigaboy) by smtp.web.de with smtp (WEB.DE(Exim) 4.28 #21) id 16f8mf-0002SQ-00 for linux-dvb@linuxtv.org; Mon, 25 Feb 2002 01:14:25 +0100 Message-ID: <01fd01c1bd91$88b73460$0301a8c0@buero.de> From: "Reiner Rosin" To: References: Subject: [linux-dvb] Re: DVB-C Analog module support? Date: Mon, 25 Feb 2002 01:15:29 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: rosinr@web.de X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: rosinr@web.de Precedence: bulk X-list: linux-dvb Hello, > I have a Siemens DVB-Cable with the analog module. Is there support for > this module planned? (driver and vdr) AFAIR, not (at least not from convergence) ... but perhaps someone is working on a solution? > Is there any programm, that can search for channel, so I don't need to use > the channel.conf.cable, that is in the package? DTV should do the job, but I'm not really sure about this, since I only use DVBs. best regards, reiner -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Mon Feb 25 05:16:33 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 6534 invoked by uid 0); 25 Feb 2002 05:16:33 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 25 Feb 2002 05:16:33 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16fDUL-0004WD-00; Mon, 25 Feb 2002 06:15:49 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Mon, 25 Feb 2002 06:11:32 +0100 (CET) Received: from oe102.pav0.hotmail.com ([64.4.33.244] helo=hotmail.com) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16fDQB-0004F5-00 for ; Mon, 25 Feb 2002 06:11:31 +0100 Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sun, 24 Feb 2002 20:58:59 -0800 X-Originating-IP: [61.171.31.32] From: "wong hermit" To: Subject: [linux-dvb] how to fill data from local file to demux Date: Mon, 25 Feb 2002 12:58:52 +0800 MIME-Version: 1.0 X-Mailer: MSN Explorer 7.00.0021.1700 Content-type: text/plain Message-ID: X-OriginalArrivalTime: 25 Feb 2002 04:58:59.0597 (UTC) FILETIME=[22F203D0:01C1BDB9] X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: hermitcranecn@msn.com Precedence: bulk X-list: linux-dvb i am a beginner of using linux dvb card . now i must write a application which read ts from file and fill it to demux of dvb card, and then read these data section from demux. but i don't know how to fill these data to demux. help me please!´ÓÍøÕ¾µÃµ½¸ü¶àÐÅÏ¢¡£MSN Explorer Ãâ·ÑÏÂÔØ:http://explorer.msn.com/lccn -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Mon Feb 25 09:33:38 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 23859 invoked by uid 0); 25 Feb 2002 09:33:38 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 25 Feb 2002 09:33:38 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16fHUo-0007gb-00; Mon, 25 Feb 2002 10:32:34 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Mon, 25 Feb 2002 10:28:31 +0100 (CET) Received: from [193.45.189.139] (helo=pcmsgroup.com) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16fHQt-0006S3-00 for ; Mon, 25 Feb 2002 10:28:31 +0100 Received: from [192.168.161.55] (account john.williams@pcmsdatafit.co.uk HELO JohnW.pcmsdatafit.co.uk) by pcmsgroup.com (CommuniGate Pro SMTP 3.4.5) with ESMTP id 783292 for linux-dvb@linuxtv.org; Mon, 25 Feb 2002 09:30:06 +0000 Message-Id: <5.1.0.14.1.20020225092127.00a07780@mail-host.pcmsgroup.com> X-Sender: John.Williams@pcmsdatafit.co.uk@mail-host.pcmsgroup.com X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Mon, 25 Feb 2002 09:27:22 +0000 To: linux-dvb@linuxtv.org From: John Williams Subject: [linux-dvb] Re: How to CA support in current driver? (was: Re: Re: OSD problems investigated) In-Reply-To: <001a01c1bd67$bf678c00$22e81cd4@kruemelmonster> References: <5.1.0.14.1.20020218094009.00a04a80@mail-host.pcmsgroup.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: John.Williams@pcmsdatafit.co.uk Precedence: bulk X-list: linux-dvb At 20:16 24/02/02 +0100, you wrote: > > You might like to investigate the new code to read and write the CI that > > has appeared in the latest driver versions (0.9.4 and later). It is > > undocumented, but I suppose it is doing the same as my code was trying to > > do. Perhaps Convergence have fixed the CI support in their firmware; if >so, > > then I'll be the first to throw away what I've done and use their code. > >I'm currently trying to use the new code, but I don't know how to do it >right. I haven't done any DVB programming before so please be gentle with me >if I'm doing something fundamentally wrong here ;-) > >If I understand correctly, I have to send the Program Number to the >CA-Interface to start decrypting a program stream. How do I do this? The >driver code in dvb.c just reads: Henning, First I should say that I haven't tried this, so anything I say about it might be wrong. With the original Technotrend firmware, you have to send the program number to the CI in order for it to start decrypting. But the Convergence firmware is different: you don't need to do this. It should start decrypting as soon as you set the video and audio PIDs. So the CA_SEND_MSG ioctl is just not needed with their firmware. That's why it has no code to support it. If you don't see a decrypted program already with the Convergence firmware, something else is wrong. The thing that was missing in the Convergence stuff was a way of reading the "CAM menu" (used for setting the PIN code, accessing the "goodies" menu or whatever). My code accessed this by ioctl calls, which has not a very good design. Convergence have now added some code to their driver to support read() and write() for the "ca" device; I suppose this gives access to the "CAM menu". If you want to experiment, try just opening /dev/ost/ca and reading from it, and see what you get. John ______________________________________________ The information contained in this e-mail is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. If you are not the intended recipient of this e-mail, the use of this information or any disclosure, copying or distribution is prohibited and may be unlawful. If you received this in error, please contact the sender and delete the material from any computer. The views expressed in this e-mail may not necessarily be the views of The PCMS Group plc and should not be taken as authority to carry out any instruction contained. -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Mon Feb 25 09:34:53 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 24138 invoked by uid 0); 25 Feb 2002 09:34:53 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 25 Feb 2002 09:34:53 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16fHWG-0007vv-00; Mon, 25 Feb 2002 10:34:04 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Mon, 25 Feb 2002 10:31:11 +0100 (CET) Received: from [193.45.189.139] (helo=pcmsgroup.com) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16fHTS-0007Od-00 for ; Mon, 25 Feb 2002 10:31:10 +0100 Received: from [192.168.161.55] (account john.williams@pcmsdatafit.co.uk HELO JohnW.pcmsdatafit.co.uk) by pcmsgroup.com (CommuniGate Pro SMTP 3.4.5) with ESMTP id 783304 for linux-dvb@linuxtv.org; Mon, 25 Feb 2002 09:32:46 +0000 Message-Id: <5.1.0.14.1.20020225092800.009f5ce0@mail-host.pcmsgroup.com> X-Sender: John.Williams@pcmsdatafit.co.uk@mail-host.pcmsgroup.com X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Mon, 25 Feb 2002 09:30:02 +0000 To: linux-dvb@linuxtv.org From: John Williams Subject: [linux-dvb] Undeliverable mail In-Reply-To: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: John.Williams@pcmsdatafit.co.uk Precedence: bulk X-list: linux-dvb Sorry for the off-topic post, but I'm getting this reply about 50% of the time when I try to post to the mailing list. Can anyone tell me what I'm doing wrong? John >Failed to deliver to 'linux-dvb@linuxtv.org' >SMTP module(domain linuxtv.org) reports: > host linuxtv.org says: > 553 sorry, that domain isn't in my list of allowed rcpthosts (#5.7.1) > >Reporting-MTA: dns; pcmsgroup.com > >Original-Recipient: rfc822;linux-dvb@linuxtv.org >Final-Recipient: rfc822;linux-dvb@linuxtv.org >Action: failed >Status: 5.0.0 >Received: from [192.168.161.55] (account john.williams@pcmsdatafit.co.uk >HELO JohnW.pcmsdatafit.co.uk) > by pcmsgroup.com (CommuniGate Pro SMTP 3.4.5) > with ESMTP id 783269 for linux-dvb@linuxtv.org; Mon, 25 Feb 2002 > 09:19:52 +0000 >Message-Id: <5.1.0.14.1.20020225090507.009fbe40@mail-host.pcmsgroup.com> >X-Sender: John.Williams@pcmsdatafit.co.uk@mail-host.pcmsgroup.com >X-Mailer: QUALCOMM Windows Eudora Version 5.1 >Date: Mon, 25 Feb 2002 09:17:08 +0000 >To: linux-dvb@linuxtv.org >From: John Williams >Subject: Re: [linux-dvb] How to CA support in current driver? (was: Re: > Re: OSD problems investigated) >In-Reply-To: <001a01c1bd67$bf678c00$22e81cd4@kruemelmonster> >References: <5.1.0.14.1.20020218094009.00a04a80@mail-host.pcmsgroup.com> >Mime-Version: 1.0 >Content-Type: text/plain; charset="us-ascii"; format=flowed ______________________________________________ The information contained in this e-mail is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. If you are not the intended recipient of this e-mail, the use of this information or any disclosure, copying or distribution is prohibited and may be unlawful. If you received this in error, please contact the sender and delete the material from any computer. The views expressed in this e-mail may not necessarily be the views of The PCMS Group plc and should not be taken as authority to carry out any instruction contained. -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Mon Feb 25 11:05:11 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 20558 invoked by uid 0); 25 Feb 2002 11:05:11 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 25 Feb 2002 11:05:11 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16fIvg-0006Wj-00; Mon, 25 Feb 2002 12:04:24 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Mon, 25 Feb 2002 12:01:34 +0100 (CET) Received: from [202.96.44.19] (helo=smtp.263.net) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16fIsw-0006DC-00 for ; Mon, 25 Feb 2002 12:01:34 +0100 Received: from localhost (localhost [127.0.0.1]) by smtp.263.net (Postfix) with SMTP id F34BB1D544E32 for ; Mon, 25 Feb 2002 18:49:12 +0800 (CST) Message-ID: <000901c1bde9$dad7f420$07040278@tb> From: "frankta" To: "linuxtv" Subject: [linux-dvb] Does the CI ioctl of the driver version 0.94 work? Date: Mon, 25 Feb 2002 18:47:43 +0800 MIME-Version: 1.0 Content-Type: text/plain; charset="gb2312" Content-Transfer-Encoding: base64 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2615.200 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: frankta@263.net Precedence: bulk X-list: linux-dvb SGksDQogIEFmdGVyIHJlYWRpbmcgdGhlIGNvZGUgb2YgZHZiLmMgb2YgdmVyc2lvbiAwLjk0LEkg ZmluZCB0aGF0IHRoZSBDb252ZXJnZW5jZSdzIGhhdmUgYWRkZWQgc29tZSBpb3RjbHMgYWJvdXQg Q0ksZG9lcyB0aGVzZSBpb2N0bCBjYWxscyB3b3JrPyBJZiB5ZXMsIGNhbiBhbnlvbmUgZ2l2ZSBt b3JlIGRldGFpbCBhYm91dCBob3cgdG8gdXNlIHRoZXNlPw0KDQoNClJlZ2FyZHMsDQpGcmFua3Rh DQo= -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Mon Feb 25 11:29:03 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 26011 invoked by uid 0); 25 Feb 2002 11:29:03 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 25 Feb 2002 11:29:03 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16fJIm-0008OE-00; Mon, 25 Feb 2002 12:28:16 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Mon, 25 Feb 2002 12:26:23 +0100 (CET) Received: from gw-nl4.philips.com ([212.153.190.6]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16fJGw-00087a-00 for ; Mon, 25 Feb 2002 12:26:22 +0100 Received: from smtpscan-nl3.philips.com (localhost.philips.com [127.0.0.1]) by gw-nl4.philips.com with ESMTP id MAA13496 for ; Mon, 25 Feb 2002 12:25:08 +0100 (CET) (envelope-from immo.benjes@philips.com) From: immo.benjes@philips.com Received: from smtpscan-nl3.philips.com(130.139.36.23) by gw-nl4.philips.com via mwrap (4.0a) id xma013492; Mon, 25 Feb 02 12:25:08 +0100 Received: from smtprelay-nl1.philips.com (localhost [127.0.0.1]) by smtpscan-nl3.philips.com (8.9.3/8.8.5-1.2.2m-19990317) with ESMTP id MAA29099 for ; Mon, 25 Feb 2002 12:26:21 +0100 (MET) Received: from hbg001soh.diamond.philips.com (e1soh01.diamond.philips.com [130.143.165.212]) by smtprelay-nl1.philips.com (8.9.3/8.8.5-1.2.2m-19990317) with ESMTP id LAA26120 for ; Mon, 25 Feb 2002 11:26:20 GMT To: Subject: [linux-dvb] devfs question Date: Mon, 25 Feb 2002 11:26:15 +0000 Message-ID: X-MIMETrack: Serialize by Router on hbg001soh/H/SERVER/PHILIPS(Release 5.0.5 |September 22, 2000) at 25/02/2002 12:45:07, Serialize complete at 25/02/2002 12:45:07 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: 8bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: immo.benjes@philips.com Precedence: bulk X-list: linux-dvb Hi are the drivers written for devfs only? When I look at the sources (version from 13/02/2002) devfs_fs_kernel.h is included in dvbdev.c without checking for CONFIG_DEVFS_FS. Will the driver work on a non devfs system with two cards (with one card it works). Do you recommend using a devfs enabled system? Regards Immo -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Mon Feb 25 12:33:39 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 17385 invoked by uid 0); 25 Feb 2002 12:33:38 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 25 Feb 2002 12:33:38 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16fKJK-0006Y5-00; Mon, 25 Feb 2002 13:32:54 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Mon, 25 Feb 2002 13:29:35 +0100 (CET) Received: from mailout04.sul.t-online.com ([194.25.134.18]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16fKG7-0005Qo-00 for ; Mon, 25 Feb 2002 13:29:35 +0100 Received: from fwd01.sul.t-online.de by mailout04.sul.t-online.com with smtp id 16fKG6-0002f1-03; Mon, 25 Feb 2002 13:29:34 +0100 Received: from diadem.milky.way (04335931990-0001@[217.1.39.156]) by fwd01.sul.t-online.com with esmtp id 16fKFt-0TiejAC; Mon, 25 Feb 2002 13:29:21 +0100 Received: from localhost (crest@localhost) by diadem.milky.way (8.9.3/8.9.3) with ESMTP id NAA03110 for ; Mon, 25 Feb 2002 13:28:01 +0100 Date: Mon, 25 Feb 2002 13:28:01 +0100 (CET) From: rolf.siebrecht@t-online.de (Rolf Siebrecht) To: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: how to fill data from local file to demux In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-Sender: 04335931990-0001@t-dialin.net X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: rolf.siebrecht@t-online.de Precedence: bulk X-list: linux-dvb Hi! On Mon, 25 Feb 2002, wong hermit wrote: > i am a beginner of using linux dvb card . > now i must write a application which read ts from file and fill it to demux of dvb card, > and then read these data section from demux. but i don't know how to fill these data to demux. Do you want to achieve a file-to-file conversion by using the hardware demuxer? That's rather fussy, isn't it? There are software converters in the mpegtools subdirectory of the driver package that can divide a transport stream into everything... (nearly). Bye, Rolf -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Mon Feb 25 13:01:27 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 26887 invoked by uid 0); 25 Feb 2002 13:01:27 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 25 Feb 2002 13:01:27 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16fKk5-0000WV-00; Mon, 25 Feb 2002 14:00:33 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Mon, 25 Feb 2002 13:57:09 +0100 (CET) Received: from mailout09.sul.t-online.com ([194.25.134.84]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16fKgm-0007pX-00 for ; Mon, 25 Feb 2002 13:57:08 +0100 Received: from fwd01.sul.t-online.de by mailout09.sul.t-online.com with smtp id 16fKG6-0000ak-0B; Mon, 25 Feb 2002 13:29:34 +0100 Received: from diadem.milky.way (04335931990-0001@[217.1.39.156]) by fwd01.sul.t-online.com with esmtp id 16fKFt-0TiejBC; Mon, 25 Feb 2002 13:29:21 +0100 Received: from localhost (crest@localhost) by diadem.milky.way (8.9.3/8.9.3) with ESMTP id JAA02429 for ; Mon, 25 Feb 2002 09:44:44 +0100 Date: Mon, 25 Feb 2002 09:44:44 +0100 (CET) From: rolf.siebrecht@t-online.de (Rolf Siebrecht) To: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: DVB-C Analog module support? In-Reply-To: <01fd01c1bd91$88b73460$0301a8c0@buero.de> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-Sender: 04335931990-0001@t-dialin.net X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: rolf.siebrecht@t-online.de Precedence: bulk X-list: linux-dvb Hi! On Mon, 25 Feb 2002, Reiner Rosin wrote: > > I have a Siemens DVB-Cable with the analog module. Is there support for > > this module planned? (driver and vdr) > AFAIR, not (at least not from convergence) ... but perhaps someone is > working > on a solution? But there _is_ code in dvb.c that initializes the analog sound module. (A module carrying an MSP3400 chip, right?) Does it not work properly? There should be a syslog message as dvb0: DVB-C analog module detected, initializing MSP3400 I myself have neither DVB-C card nor TV cable. Bye, Rolf -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From vdr-bounce@linuxtv.org Mon Feb 25 13:07:32 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 27239 invoked by uid 0); 25 Feb 2002 13:07:32 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 25 Feb 2002 13:07:32 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16fKqF-0001DL-00; Mon, 25 Feb 2002 14:06:55 +0100 Received: with LISTAR (v0.129a; list vdr); Mon, 25 Feb 2002 14:06:23 +0100 (CET) Received: from p50812f75.dip.t-dialin.net ([80.129.47.117] helo=kopernikus.tux-web.de) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16fKpj-00016P-00; Mon, 25 Feb 2002 14:06:23 +0100 Received: from kopernikus.tux-web.de (gernot@localhost [127.0.0.1]) by kopernikus.tux-web.de (8.12.1/8.12.1/Debian -5) with ESMTP id g1PD5pFo019911; Mon, 25 Feb 2002 14:05:52 +0100 Received: from localhost (gernot@localhost) by kopernikus.tux-web.de (8.12.1/8.12.1/Debian -5) with ESMTP id g1PD5p1F019907; Mon, 25 Feb 2002 14:05:51 +0100 X-Authentication-Warning: kopernikus.tux-web.de: gernot owned process doing -bs Date: Mon, 25 Feb 2002 14:05:51 +0100 (CET) From: "Gernot A. Weber" To: , Subject: [vdr] video output Rev 2.1 - questions to Rev 1.3 Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-listar-version: Listar v0.129a Sender: vdr-bounce@linuxtv.org Errors-to: vdr-bounce@linuxtv.org X-original-sender: gernot@tux-web.de Precedence: bulk Reply-to: vdr@linuxtv.org X-list: vdr Hi, I had my Hauppauge WinTV DVB-S Rev 2.1 working for half a year now. Last friday I built a new cinch-video cable (75 Ohm, 7m). Afterwards the quality of my picture was very bad (it seems like a strong blue and red but hardly any green). I switched back to my old cable but the problems were not gone. Someone who had similar problems? Any ideas? If there is no way to fix the card - I found some Rev 1.3. Is it possible to build a S-VHS output to every Rev 1.3 card? Is the AC3 patch also working for Rev 1.3 cards? Thanks in advance, Gernot Weber -- Gernot A. Weber http://www.tux-web.de Only wimps use tape backup: _real_ men just upload their important stuff on ftp, and let the rest of the world mirror it. Linus Torvalds, after a hard drive crash From linux-dvb-bounce@linuxtv.org Mon Feb 25 13:09:21 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 27574 invoked by uid 0); 25 Feb 2002 13:09:21 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 25 Feb 2002 13:09:21 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16fKrs-0001U3-00; Mon, 25 Feb 2002 14:08:36 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Mon, 25 Feb 2002 14:06:55 +0100 (CET) Received: from p50812f75.dip.t-dialin.net ([80.129.47.117] helo=kopernikus.tux-web.de) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16fKpj-00016P-00; Mon, 25 Feb 2002 14:06:23 +0100 Received: from kopernikus.tux-web.de (gernot@localhost [127.0.0.1]) by kopernikus.tux-web.de (8.12.1/8.12.1/Debian -5) with ESMTP id g1PD5pFo019911; Mon, 25 Feb 2002 14:05:52 +0100 Received: from localhost (gernot@localhost) by kopernikus.tux-web.de (8.12.1/8.12.1/Debian -5) with ESMTP id g1PD5p1F019907; Mon, 25 Feb 2002 14:05:51 +0100 X-Authentication-Warning: kopernikus.tux-web.de: gernot owned process doing -bs Date: Mon, 25 Feb 2002 14:05:51 +0100 (CET) From: "Gernot A. Weber" To: , Subject: [linux-dvb] video output Rev 2.1 - questions to Rev 1.3 Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: gernot@tux-web.de Precedence: bulk X-list: linux-dvb Hi, I had my Hauppauge WinTV DVB-S Rev 2.1 working for half a year now. Last friday I built a new cinch-video cable (75 Ohm, 7m). Afterwards the quality of my picture was very bad (it seems like a strong blue and red but hardly any green). I switched back to my old cable but the problems were not gone. Someone who had similar problems? Any ideas? If there is no way to fix the card - I found some Rev 1.3. Is it possible to build a S-VHS output to every Rev 1.3 card? Is the AC3 patch also working for Rev 1.3 cards? Thanks in advance, Gernot Weber -- Gernot A. Weber http://www.tux-web.de Only wimps use tape backup: _real_ men just upload their important stuff on ftp, and let the rest of the world mirror it. Linus Torvalds, after a hard drive crash -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Mon Feb 25 13:52:59 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 9627 invoked by uid 0); 25 Feb 2002 13:52:59 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 25 Feb 2002 13:52:59 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16fLY1-0004tD-00; Mon, 25 Feb 2002 14:52:09 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Mon, 25 Feb 2002 14:49:19 +0100 (CET) Received: from mail.swelcom.fi ([194.100.33.13]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16fLVH-0004YR-00 for ; Mon, 25 Feb 2002 14:49:19 +0100 Received: from swclus1.swelcom.swelcom.fi ([10.42.8.33]) by mail.swelcom.fi with Microsoft SMTPSVC(5.0.2195.4453); Mon, 25 Feb 2002 15:49:18 +0200 Received: by swclus1.swelcom.swelcom.fi with Internet Mail Service (5.5.2653.19) id <126TCT4V>; Mon, 25 Feb 2002 15:49:18 +0200 Message-ID: <90D2243C3D0B8B4AB20FAA77AFD974B6373F42@swclus1.swelcom.swelcom.fi> From: Falck Kenneth To: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: <200MHz frequencies Date: Mon, 25 Feb 2002 15:49:13 +0200 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable X-OriginalArrivalTime: 25 Feb 2002 13:49:18.0186 (UTC) FILETIME=[384D64A0:01C1BE03] X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: kennu@swelcom.fi Precedence: bulk X-list: linux-dvb Hi, I just want to verify that I also got the lower (<200MHz) frequencies = to work with TT-DVB-C PCI. I'm using the current CVS version and I changed = the SP5659C limit in tuner.c from 174000000 to 120000000. I am still suffering from a lot of instability when tuning in (tuning sometimes fails many times). I suppose it may be related to local bad = signal quality, unless there is something missing from the Linux driver. I = think Joachim K=F6nig (or somebody on the list) had a theory that AFC might = not be used correctly? Btw, the lowest frequency currently used on our network is 138 MHz, so = I lowered the limit of 140 MHz that Lauri and Ralph advised. However, I = have not been able to verify whether this works or not. I am not currently = able to tune into 138 MHz with either limit (120 or 140). PS. Finnish people may be interested to visit a website I've set up at http://dvb.swelcom.fi which contains information about the frequencies, services and other parameters of some Finnish DVB networks. The cable network info is in fact generated automatically from the DVB metadata (NIT/SDT tables) with a little program using the TechnoTrend DVB-C = card. I hope to add more details and perhaps DVB-T autogeneration in the = future. --=20 Kenneth Falck SWelcom Oy R&D Manager Ludviginkatu 6-8=20 +358 40 5103121 00130 Helsinki, Finland -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Tue Feb 26 10:02:12 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 14532 invoked by uid 0); 26 Feb 2002 10:02:12 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 26 Feb 2002 10:02:12 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16feQE-0000T4-00; Tue, 26 Feb 2002 11:01:22 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 26 Feb 2002 10:56:18 +0100 (CET) Received: from mail.gmx.net ([213.165.64.20]) by chambertin.convergence.de with smtp (Exim 3.33 #2 ) id 16feLJ-0007aU-00 for ; Tue, 26 Feb 2002 10:56:18 +0100 Received: (qmail 27942 invoked by uid 0); 26 Feb 2002 09:55:44 -0000 Received: from unknown (HELO localhost) (62.144.236.48) by mail.gmx.net (mp002-rz3) with SMTP; 26 Feb 2002 09:55:44 -0000 Received: by localhost (Postfix, from userid 1002) id B8B1C2A89B; Tue, 26 Feb 2002 10:38:26 +0100 (CET) Received: from localhost (localhost [127.0.0.1]) by localhost (Postfix) with ESMTP id 96AE12A89A; Tue, 26 Feb 2002 10:38:26 +0100 (CET) Date: Tue, 26 Feb 2002 10:38:26 +0100 (CET) From: Martin aus Mainz X-Sender: martyausmainz@www.marty44.net To: Rolf Siebrecht Cc: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: DVB-C Analog module support? In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: martyausmainz@gmx.de Precedence: bulk X-list: linux-dvb On Mon, 25 Feb 2002, Rolf Siebrecht wrote: > Hi! > > On Mon, 25 Feb 2002, Reiner Rosin wrote: > > > I have a Siemens DVB-Cable with the analog module. Is there support for > > > this module planned? (driver and vdr) > > AFAIR, not (at least not from convergence) ... but perhaps someone is > > working > > on a solution? > > But there _is_ code in dvb.c that initializes the analog sound module. (A > module carrying an MSP3400 chip, right?) Does it not work properly? There > should be a syslog message as > dvb0: DVB-C analog module detected, initializing MSP3400 > > I myself have neither DVB-C card nor TV cable. > Yes, you're right, the analog module is detected. But is there any kind of software, that can something do with the module? marty -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Tue Feb 26 13:14:10 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 8870 invoked by uid 0); 26 Feb 2002 13:14:10 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 26 Feb 2002 13:14:10 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16fhPw-0007FA-00; Tue, 26 Feb 2002 14:13:16 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 26 Feb 2002 14:08:44 +0100 (CET) Received: from postfix2-2.free.fr ([213.228.0.140]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16fhLY-0006r8-00 for ; Tue, 26 Feb 2002 14:08:44 +0100 Received: from wanadoo.fr (bordeaux-1-a7-86-84.dial.proxad.net [62.147.86.84]) by postfix2-2.free.fr (Postfix) with ESMTP id B37265F89F for ; Tue, 26 Feb 2002 14:08:43 +0100 (CET) Sender: root@free.fr Message-ID: <3C7B887D.FA6F752D@wanadoo.fr> Date: Tue, 26 Feb 2002 14:07:09 +0100 From: Patrick GUENEAU X-Mailer: Mozilla 4.76 [en] (X11; U; Linux 2.4.10 i686) X-Accept-Language: en MIME-Version: 1.0 To: "linux-dvb@linuxtv.org" Subject: [linux-dvb] Multiplexing Video+2audio+Subpicture Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: pgueneau@wanadoo.fr Precedence: bulk X-list: linux-dvb Hello, i am searching for a simple but complete multiplex program to convert PES streams to PS. I have found many utilities but a few are able to mix two audio streams (tcmplex from transcode package can do it for instance). I have found none that can mix mode than 1 video + 2 audio. I am adapting teletext addon from Peter Seyringer to extract subtitles from Teletext pages (used by Canal+ at least). My first idea is to generate subtitles supported by MPlayer. But it would be great if i can generate PS streams mixing Video, Multiple Audios ( original, and local version, PCM and AC3) and subpicture that could be burned on DVD-R or replayed by any Software DVD player. Do you think mplex or tcmplex could be easily adapted to mix subpictures streams (DVD style not DVB style) ? I don't want to spend too much time integrating the whole DVD-MPEG2 standard spec. to be able to build just another (and for sure incomplete and buggy) mplex program. Any idea ? Patrick. -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Tue Feb 26 13:42:58 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 18457 invoked by uid 0); 26 Feb 2002 13:42:58 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 26 Feb 2002 13:42:58 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16fhrh-0001HI-00; Tue, 26 Feb 2002 14:41:57 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 26 Feb 2002 14:39:53 +0100 (CET) Received: from mailout02.sul.t-online.com ([194.25.134.17]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16fhph-0000sl-00 for ; Tue, 26 Feb 2002 14:39:53 +0100 Received: from fwd04.sul.t-online.de by mailout02.sul.t-online.com with smtp id 16fhph-00088x-05; Tue, 26 Feb 2002 14:39:53 +0100 Received: from diadem.milky.way (04335931990-0001@[217.1.37.229]) by fwd04.sul.t-online.com with esmtp id 16fhpS-0aPKToC; Tue, 26 Feb 2002 14:39:38 +0100 Received: from localhost (crest@localhost) by diadem.milky.way (8.9.3/8.9.3) with ESMTP id OAA02130 for ; Tue, 26 Feb 2002 14:15:49 +0100 Date: Tue, 26 Feb 2002 14:15:49 +0100 (CET) From: rolf.siebrecht@t-online.de (Rolf Siebrecht) To: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: DVB-C Analog module support? In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-Sender: 04335931990-0001@t-dialin.net X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: rolf.siebrecht@t-online.de Precedence: bulk X-list: linux-dvb Hi! On Tue, 26 Feb 2002, Martin aus Mainz wrote: > > But there _is_ code in dvb.c that initializes the analog sound module. (A > > module carrying an MSP3400 chip, right?) Does it not work properly? There > > should be a syslog message as > > dvb0: DVB-C analog module detected, initializing MSP3400 > > > > I myself have neither DVB-C card nor TV cable. > Yes, you're right, the analog module is detected. But is there any kind of > software, that can something do with the module? I don't think so. The driver has no programming interface for this module, thus applications have no access to it. I can't create such extensions - just curious: what are you missing? Bye, Rolf -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Tue Feb 26 13:58:45 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 23391 invoked by uid 0); 26 Feb 2002 13:58:45 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 26 Feb 2002 13:58:45 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16fi7B-0001vU-00; Tue, 26 Feb 2002 14:57:57 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 26 Feb 2002 14:54:56 +0100 (CET) Received: from gw-nl5.philips.com ([212.153.235.99]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16fi4G-0001fF-00 for ; Tue, 26 Feb 2002 14:54:56 +0100 Received: from smtpscan-nl1.philips.com (localhost.philips.com [127.0.0.1]) by gw-nl5.philips.com with ESMTP id OAA24305; Tue, 26 Feb 2002 14:54:52 +0100 (MET) (envelope-from jonathan.foster@philips.com) From: jonathan.foster@philips.com Received: from smtpscan-nl1.philips.com(130.139.36.21) by gw-nl5.philips.com via mwrap (4.0a) id xma024295; Tue, 26 Feb 02 14:54:52 +0100 Received: from smtprelay-nl1.philips.com (localhost [127.0.0.1]) by smtpscan-nl1.philips.com (8.9.3/8.8.5-1.2.2m-19990317) with ESMTP id OAA24917; Tue, 26 Feb 2002 14:54:51 +0100 (MET) Received: from hbg001soh.diamond.philips.com (e1soh01.diamond.philips.com [130.143.165.212]) by smtprelay-nl1.philips.com (8.9.3/8.8.5-1.2.2m-19990317) with ESMTP id NAA25087; Tue, 26 Feb 2002 13:54:50 GMT Subject: [linux-dvb] Re: black borders in xawtv To: Johann Hanne Cc: linux-dvb@linuxtv.org X-Mailer: Lotus Notes Release 5.0.5 September 22, 2000 Message-ID: Date: Tue, 26 Feb 2002 13:46:42 +0000 X-MIMETrack: Serialize by Router on hbg001soh/H/SERVER/PHILIPS(Release 5.0.5 |September 22, 2000) at 26/02/2002 15:13:39 MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: jonathan.foster@philips.com Precedence: bulk X-list: linux-dvb Hi, Johann Hanne wrote: > But the overlay region is not completely filled up with the TV > picture, there are borders at the left, at the right and at the bottom of > the overlay region. When taking a screenshot with xawtv, I get a 768x576 > picture (PAL size). PAL is broadcast as 720x576 digital video. But the analog signal is only 702 pixels wide, so 9 pixels each side are left black. > When examinig it with a picture viewer, the left border is about 14 > pixels, the right border is about 12 pixels That sounds about right, given that you're scaling horizontally from 720 to 768 pixels. > and the bottom border is about 3 pixels. Don't know where this one is coming from, but bear in mind that any analog TV is going to lose some of the image around each edge, so (assuming this is in the original MPEG) it wouldn't be shown normally. > Is it a DVB driver, v4l or xawtv problem? No. > Is there a solution for getting around this problem? Yep, crop the image before you display it. Kind regards, Jon -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Tue Feb 26 14:37:38 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 5266 invoked by uid 0); 26 Feb 2002 14:37:38 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 26 Feb 2002 14:37:38 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16fiik-0004rf-00; Tue, 26 Feb 2002 15:36:46 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 26 Feb 2002 15:34:06 +0100 (CET) Received: from moutvdomng1.kundenserver.de ([212.227.126.181]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16figA-0004WG-00 for ; Tue, 26 Feb 2002 15:34:06 +0100 Received: from [172.19.20.62] (helo=mrvdomng1.kundenserver.de) by moutvdomng1.kundenserver.de with esmtp (Exim 3.22 #2) id 16fig9-0000iE-00 for linux-dvb@linuxtv.org; Tue, 26 Feb 2002 15:34:05 +0100 Received: from p3ee286c9.dip0.t-ipconnect.de ([62.226.134.201] helo=flood-net.de) by mrvdomng1.kundenserver.de with esmtp (Exim 3.22 #2) id 16fig9-0003Um-00 for linux-dvb@linuxtv.org; Tue, 26 Feb 2002 15:34:05 +0100 Received: from localhost (unknown [127.0.0.1]) by flood-net.de (Postfix) with ESMTP id F1922A3B6 for ; Tue, 26 Feb 2002 14:33:50 +0000 (UTC) Content-Transfer-Encoding: 8bit Content-Type: text/plain; charset="iso-8859-1" Date: Tue, 26 Feb 2002 15:35:21 +0100 From: Andreas Roedl Message-Id: <20020226143302.C5E62A3B3@flood-net.de> MIME-Version: 1.0 Organization: Flood-Net Received: from flood-net.de (localhost [127.0.0.1]) by localhost (AvMailGate-6.11.0.4) id 13019-41384A08; Tue, 26 Feb 2002 15:33:02 +0100 Received: from there (hydra.flood-net.local [10.0.0.11]) by flood-net.de (Postfix) with SMTP id C5E62A3B3 for ; Tue, 26 Feb 2002 15:33:02 +0100 (CET) Subject: [linux-dvb] No get_fast_time() in 2.4.18 To: linux-dvb@linuxtv.org X-AntiVirus: OK! AvMailGate Version 6.11.0.5 at exciter has not found any known virus in this email. X-Mailer: KMail [version 1.3] X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: flood@flood-net.de Precedence: bulk X-list: linux-dvb Hello! There's no function get_fast_time in 2.4.18 anymore, which is required for dvb_frontend.c. This should be changed to do_gettimeofday(). Andi -- Web: http://www.flood-net.de/ Mail: flood@flood-net.de Phone: +49-(0)-30-680577-44 Linux opens doors, not windows! http://www.bundestux.de/ http://counter.li.org/ -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Tue Feb 26 21:28:06 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 7603 invoked by uid 0); 26 Feb 2002 21:28:06 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 26 Feb 2002 21:28:06 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16fp85-0001iS-00; Tue, 26 Feb 2002 22:27:21 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Tue, 26 Feb 2002 22:22:56 +0100 (CET) Received: from mailout04.sul.t-online.com ([194.25.134.18]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16fp3o-0001JP-00 for ; Tue, 26 Feb 2002 22:22:56 +0100 Received: from fwd10.sul.t-online.de by mailout04.sul.t-online.com with smtp id 16fp3n-0006qz-03; Tue, 26 Feb 2002 22:22:55 +0100 Received: from cs.uni-magdeburg.de (03917347477-0001@[217.228.118.172]) by fmrl10.sul.t-online.com with esmtp id 16fp3U-07Zwa8C; Tue, 26 Feb 2002 22:22:36 +0100 Message-ID: <3C7C0A88.4030400@cs.uni-magdeburg.de> Date: Tue, 26 Feb 2002 22:22:00 +0000 From: Andreas Schultz User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:0.9.8+) Gecko/20020204 X-Accept-Language: en-us MIME-Version: 1.0 To: linux-dvb@linuxtv.org Subject: [linux-dvb] CAM support screwed Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit X-Sender: 03917347477-0001@t-dialin.net X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: aschultz@cs.uni-magdeburg.de Precedence: bulk X-list: linux-dvb Hi, The drivers CAM support has apparently become somewhat unstable between 17.12.2001 and now. If tried various drivers from Feb 2002, and all show the same behaviour. The first encrypted channel after a power cycle decrypts sucessfully. All switches to other decrypted channels after that are unreliable. Some work, some stay black. With the CVS version from 17.12.2001, all channel changes are succesfull. All userspace tools are the same. CAM: IRDETO 4.7SE Is there any chance to get the old behaviour back???? Andreas -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 27 08:17:21 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 26092 invoked by uid 0); 27 Feb 2002 08:17:20 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 27 Feb 2002 08:17:20 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16fzGB-00050w-00; Wed, 27 Feb 2002 09:16:23 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 27 Feb 2002 09:13:24 +0100 (CET) Received: from [202.96.44.19] (helo=smtp.263.net) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16fzDI-0004l0-00 for ; Wed, 27 Feb 2002 09:13:24 +0100 Received: from localhost (localhost [127.0.0.1]) by smtp.263.net (Postfix) with SMTP id CCCA11D544EF2 for ; Wed, 27 Feb 2002 16:06:01 +0800 (CST) Message-ID: <001001c1bf66$ad3c1590$445858c0@glowing> From: "glowing" To: Subject: [linux-dvb] How to get a complete sub_table ? Date: Wed, 27 Feb 2002 16:13:43 +0800 MIME-Version: 1.0 Content-type: text/plain X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2462.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2462.0000 X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: glowing@263.net Precedence: bulk X-list: linux-dvb Hi, I am using Linux DVB driver to parser the SI/PSI tables. but I set the filter and read the TS, I can get only a section, and when I filter and read next time, sometimes I can not get the next section of the sub table. How can i get a complete sub_table ? Regards Glowing. -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 27 10:06:57 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 27852 invoked by uid 0); 27 Feb 2002 10:06:57 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 27 Feb 2002 10:06:57 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16g0yQ-0002cF-00; Wed, 27 Feb 2002 11:06:10 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 27 Feb 2002 10:59:37 +0100 (CET) Received: from mail.gmx.net ([213.165.64.20]) by chambertin.convergence.de with smtp (Exim 3.33 #2 ) id 16g0s5-0001N9-00 for ; Wed, 27 Feb 2002 10:59:37 +0100 Received: (qmail 1273 invoked by uid 0); 27 Feb 2002 09:59:06 -0000 Received: from unknown (HELO localhost) (212.172.8.156) by mail.gmx.net (mp002-rz3) with SMTP; 27 Feb 2002 09:59:06 -0000 Received: by localhost (Postfix, from userid 1002) id E46052A89B; Wed, 27 Feb 2002 10:45:52 +0100 (CET) Received: from localhost (localhost [127.0.0.1]) by localhost (Postfix) with ESMTP id B357F2A89A; Wed, 27 Feb 2002 10:45:52 +0100 (CET) Date: Wed, 27 Feb 2002 10:45:52 +0100 (CET) From: Martin aus Mainz X-Sender: martyausmainz@www.marty44.net To: Rolf Siebrecht Cc: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: DVB-C Analog module support? In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: martyausmainz@gmx.de Precedence: bulk X-list: linux-dvb On Tue, 26 Feb 2002, Rolf Siebrecht wrote: > On Tue, 26 Feb 2002, Martin aus Mainz wrote: > > > But there _is_ code in dvb.c that initializes the analog sound module. (A > > > module carrying an MSP3400 chip, right?) Does it not work properly? There > > > should be a syslog message as > > > dvb0: DVB-C analog module detected, initializing MSP3400 > > > > > > I myself have neither DVB-C card nor TV cable. > > Yes, you're right, the analog module is detected. But is there any kind of > > software, that can something do with the module? > > I don't think so. The driver has no programming interface for this module, > thus applications have no access to it. > > I can't create such extensions - just curious: what are you missing? I have installed vdr last week, nice program. But here in Mainz/Germany, you have only some "Oeffentlicht-Rechtliche", that are sending digital in the cable. Pro7 and RTL did not send. I called RTL and they say, that they must send digital, but the first time they must do this is 2010. So I have a vdr but no programm's around, which I could use it ;) (I'm not a fan of the "Oeffentlicht-Rechtliche") So I think, that maybe in some time the analog module is supported and that there maybe in some time there is support for recording in vdr too. I have no programming skill to do this work self :( marty Sorry for the bad english -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 27 11:38:30 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 24816 invoked by uid 0); 27 Feb 2002 11:38:30 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 27 Feb 2002 11:38:30 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16g2Oz-0000p5-00; Wed, 27 Feb 2002 12:37:41 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 27 Feb 2002 12:33:04 +0100 (CET) Received: from [212.200.80.243] (helo=mail.bozic.co.yu) by chambertin.convergence.de with smtp (Exim 3.33 #2 ) id 16g2KV-0000L7-00 for ; Wed, 27 Feb 2002 12:33:03 +0100 Received: (qmail 21954 invoked from network); 27 Feb 2002 12:18:44 -0000 Received: from freestyler.bozic.co.yu (HELO there) (212.200.80.248) by mail.bozic.co.yu with SMTP; 27 Feb 2002 12:18:44 -0000 Content-Type: text/plain; charset="iso-8859-1" From: Radisa Jovicevic Reply-To: ras@bozic.co.yu Organization: D.O.O. "Bozic i sinovi" To: linux-dvb@linuxtv.org Subject: [linux-dvb] insmod errors, Techsan Electronics, DVB, EOL Date: Wed, 27 Feb 2002 12:30:03 +0100 X-Mailer: KMail [version 1.3.2] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: ras@bozic.co.yu Precedence: bulk X-list: linux-dvb Hi people, I just bought a Europe Online Entertainment (EOL) box with the following DVB card: ROOT@linux:~# lspci 00:00.0 Host bridge: Relience Computer: Unknown device 0005 (rev 01) 00:04.0 VGA compatible controller: Matrox Graphics, Inc. MGA 2164W [Millennium II] 00:05.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang] 00:06.0 Network controller: Techsan Electronics Co Ltd: Unknown device 2103 (rev 01) <--- 00:0f.0 ISA bridge: Compaq Computer Corporation Triflex PCI to ISA Bridge (rev 0c) 00:0f.1 IDE interface: Compaq Computer Corporation Triflex Dual EIDE Controller (rev 0a) 00:11.0 Host bridge: Relience Computer: Unknown device 0005 (rev 01) 01:0a.0 USB Controller: Compaq Computer Corporation USB Open Host Controller (rev 05) 01:0b.0 Network controller: Compaq Computer Corporation Netelligent WS 5100 (rev 10) 01:0c.0 SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c875 (rev 04) and on the card I can read TechniSat from a sticker on tuner and there is also a B2C2 FlexCop II chip. I have kernel 2.4.17 installed with siemens_dvb 0.9.4 drivers. My old DVB card with Philips SAA 7146A H chip worked just fine. But now, I recompiled same driver sources but when I do make insmod in driver/ directory of siemens_dvb source I get: ROOT@linux:/tmp/DVB/driver# make insmod /usr/src/linux/scripts/pathdown.sh: TOPDIR: parameter null or not set ./makedev.napi make make[1]: Entering directory `/tmp/DVB/driver' DIR=`pwd`; (cd /usr/src/linux; make SUBDIRS=$DIR modules) make[2]: Entering directory `/usr/src/linux-2.4.17' make -C /tmp/DVB/driver CFLAGS="-D__KERNEL__ -I/usr/src/linux-2.4.17/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i386 -DMODULE" MAKING_MODULES=1 modules make[3]: Entering directory `/tmp/DVB/driver' make[3]: Nothing to be done for `modules'. make[3]: Leaving directory `/tmp/DVB/driver' make[2]: Leaving directory `/usr/src/linux-2.4.17' make[1]: Leaving directory `/tmp/DVB-Techsan/driver' ( \ insmod dvbdev.o; \ insmod dvb_net.o; \ insmod i2c-core; \ insmod videodev; \ insmod dvb_filter.o; \ insmod dmxdev.o; \ insmod VES1893.o; \ insmod VES1820.o; \ insmod L64781.o; \ insmod SP8870.o debug=1; \ insmod tda8083.o; \ insmod stv0299.o; \ insmod tuner.o; \ insmod saa7146_core.o mode=0; \ insmod saa7146_v4l.o; \ insmod dvb_demux.o; \ insmod dvb_frontend.o; \ insmod dvb.o init_chan=2 pids_off=0; \ ) Using /lib/modules/2.4.17/kernel/drivers/i2c/i2c-core.o Using /lib/modules/2.4.17/kernel/drivers/media/video/videodev.o saa7146_core.o: init_module: No such device saa7146_core.o: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters saa7146_v4l.o: unresolved symbol saa7146_del_extension saa7146_v4l.o: unresolved symbol saa7146_add_extension dvb.o: unresolved symbol saa7146_del_extension dvb.o: unresolved symbol saa7146_get_handle dvb.o: unresolved symbol saa7146_add_extension make: *** [insmod] Error 1 Did anybody have same problem and did he manage to solve it? If somebody know that this card is not supported yet I would appreciate to hear that too? Thanks -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Wed Feb 27 11:54:26 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 29870 invoked by uid 0); 27 Feb 2002 11:54:26 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 27 Feb 2002 11:54:26 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16g2eS-0001qs-00; Wed, 27 Feb 2002 12:53:40 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Wed, 27 Feb 2002 12:50:23 +0100 (CET) Received: from [10.1.1.38] (helo=mocm.de ident=root) by chambertin.convergence.de with TLSv1:DES-CBC3-SHA:168 encrypted esmtp (Exim 3.33 #2 ) id 16g2bH-0001No-00 for ; Wed, 27 Feb 2002 12:50:23 +0100 Received: (from mocm@localhost) by mocm.de (8.12.0.Beta19/8.12.0.Beta19) id g1RBnIn1002397; Wed, 27 Feb 2002 12:49:18 +0100 From: "Marcus O. C. Metzler" Message-ID: <15484.51134.67154.454694@titano.metzler> Date: Wed, 27 Feb 2002 12:49:18 +0100 (CET) To: ras@bozic.co.yu Cc: linux-dvb@linuxtv.org Subject: [linux-dvb] insmod errors, Techsan Electronics, DVB, EOL In-Reply-To: References: X-Mailer: VM 6.75 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid Reply-To: Marcus Metzler X-Face: X!$Vwl\?,AW_[zm^ej\MLxN>q;R?C_sRZ*XE4V;BGT28Ewyd\:TS')W'G#Dgay8ci$*{lEd 02(Nk0OndG\752U>lozmb_R1poDm6mgHm_4.}bdS0hh.`xGUI.X2x_50T9.?_v~.,QI*$2:Q=HV@>F IP6%l~E:T|w,X[eC;|YD(A9X'sS"r$l]g<4CjAm4|f7o0>6zGwUPLinP0.d=E+_%?4>0A9'esEZ=9h $#b[g*/q/g'GVj-hDc,+V_]1.H^N,1Bju,>5FZn"B Mime-Version: 1.0 (generated by tm-edit 1.6) Content-Type: text/plain; charset=US-ASCII X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: mocm@convergence.de Precedence: bulk X-list: linux-dvb Radisa Jovicevic writes: > Hi people, > > I just bought a Europe Online Entertainment (EOL) box with the following > DVB card: > > and on the card I can read TechniSat from a sticker on tuner and there is also a B2C2 FlexCop II chip. > We have no information about the B2C2 chipset, so there won't be any drivers unless such information can be obtained and someone is willing to write it. You could ask the manufacturer of the card or the chip if they are willing to support linux. Marcus -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Thu Feb 28 03:29:01 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 7550 invoked by uid 0); 28 Feb 2002 03:29:01 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 28 Feb 2002 03:29:01 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gHEp-0003jI-00; Thu, 28 Feb 2002 04:28:11 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Thu, 28 Feb 2002 04:21:47 +0100 (CET) Received: from mplayerhq.banki.hu ([192.190.173.45] ident=root) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gH8d-0003Rf-00 for ; Thu, 28 Feb 2002 04:21:47 +0100 Received: from mplayer.dev.hu (arpi@localhost [127.0.0.1]) by localhost (8.12.0/8.12.0.Beta10/Debian 8.12.0.Beta10) with ESMTP id g1S3bYJb017600 for ; Thu, 28 Feb 2002 04:37:34 +0100 Received: (from arpi@localhost) by mplayer.dev.hu (8.12.0/8.12.0.Beta10/Debian 8.12.0.Beta10) id g1S3bYAa017598 for linux-dvb@linuxtv.org; Thu, 28 Feb 2002 04:37:34 +0100 Date: Thu, 28 Feb 2002 04:37:34 +0100 Message-Id: <200202280337.g1S3bYAa017598@mplayer.dev.hu> From: Arpi To: linux-dvb@linuxtv.org Subject: [linux-dvb] tuning problem X-Mailer: GyikSoft Mailer for UNIX v3.5 by Arpi/ESP-team (http://esp-team.scene.hu) X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: arpi@thot.banki.hu Precedence: bulk X-list: linux-dvb Hi, I've put together a simple app to scan through freq ranges and show signal strength and other flags (sync, carrier etc) for each mhz. When I start it, for few minutes it's running fine, and then it lost the control over the card, just shows zero signal. Even if i start VDR or other dvb app, i got no channels tuned again, until hard reset :( Any idea, about what am i doing wrong? Multidec 8 and the technotrend windows programs could scan the whole range, so the card/lnb etc should be ok. I just wanted to add such feature to VDR. Maybe I should disable/enable some other flags somewhere to set up 'channel scanning' mode? Or it just drives LNB to some disallowd freq range ? What's the relation between FrontendParameters.Frequency, and the LNB limits (9750, 10600 and switch freq 11700) ? For reference, the interesting part of my code: FrontendInfo info; FrontendParameters param; if((fd = open("/dev/ost/frontend",O_RDWR)) < 0){ perror("FRONTEND DEVICE: "); return -1; } printf("selftest=%d\n",ioctl(fd,FE_SELFTEST)); printf("get_info=%d\n",ioctl(fd,FE_GET_INFO,&info)); printf("get_param=%d\n",ioctl(fd,FE_GET_FRONTEND,¶m)); for(freq=info.minFrequency;freq Delivered-To: mhonarc@limes.convergence.de Received: (qmail 15213 invoked by uid 0); 28 Feb 2002 07:00:54 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 28 Feb 2002 07:00:54 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gKXs-0004Bt-00; Thu, 28 Feb 2002 08:00:04 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Thu, 28 Feb 2002 07:54:46 +0100 (CET) Received: from facade.firsthop.fi ([195.163.185.50] helo=factory.firsthop.fi) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gKSk-0003sL-00 for ; Thu, 28 Feb 2002 07:54:46 +0100 Received: (from smile@localhost) by factory.firsthop.fi (8.9.3/8.9.3) id IAA11324; Thu, 28 Feb 2002 08:53:48 +0200 Date: Thu, 28 Feb 2002 08:53:48 +0200 From: Lauri Pesonen To: Arpi Cc: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: tuning problem Message-ID: <20020228085348.B17460@firsthop.com> Reply-To: lauri.pesonen@firsthop.com Mail-Followup-To: Arpi , linux-dvb@linuxtv.org References: <200202280337.g1S3bYAa017598@mplayer.dev.hu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <200202280337.g1S3bYAa017598@mplayer.dev.hu>; from arpi@thot.banki.hu on Thu, Feb 28, 2002 at 04:37:34AM +0100 X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: lauri.pesonen@firsthop.com Precedence: bulk X-list: linux-dvb Hi, I took a look at the signal strenght code in the driver a while back and at that time there was no implementation. AFAIK the code always returned zero. do a "grep -5 -i strength *" in the driver dir. Actually there seems to be an implementation in VES1893.c. L64781.c, SP8870.c, and stv0299.c all return zero. When I tried it, I could not get any meaningful values out of the driver. BR, Luri On Thu, Feb 28, 2002 at 04:37:34AM +0100, Arpi wrote: > Hi, > > I've put together a simple app to scan through freq ranges and show signal > strength and other flags (sync, carrier etc) for each mhz. > When I start it, for few minutes it's running fine, and then it lost the > control over the card, just shows zero signal. Even if i start VDR or other > dvb app, i got no channels tuned again, until hard reset :( -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Thu Feb 28 07:03:34 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 15557 invoked by uid 0); 28 Feb 2002 07:03:34 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 28 Feb 2002 07:03:34 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gKaU-0005ET-00; Thu, 28 Feb 2002 08:02:46 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Thu, 28 Feb 2002 07:58:37 +0100 (CET) Received: from mail.gmx.net ([213.165.64.20]) by chambertin.convergence.de with smtp (Exim 3.33 #2 ) id 16gKWT-00043g-00 for ; Thu, 28 Feb 2002 07:58:37 +0100 Received: (qmail 27775 invoked by uid 0); 28 Feb 2002 06:58:05 -0000 Received: from unknown (HELO there) (203.147.24.15) by mail.gmx.net (mp002-rz3) with SMTP; 28 Feb 2002 06:58:05 -0000 Content-Type: text/plain; charset="iso-8859-1" From: Alexander Joseph Biltmore Johansen Reply-To: ajohansen@gmx.net To: linux-dvb@linuxtv.org Subject: [linux-dvb] MAC address Date: Thu, 28 Feb 2002 14:03:11 +0700 X-Mailer: KMail [version 1.3.2] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: ajohansen@gmx.net Precedence: bulk X-list: linux-dvb Hello, Im new to DVB. Im located in Thailand and they have inetVIAsat service here too. The only problem I have here is that; they only provide USB DVB receiver (penta@U+). What Im wondering is; Is it possible to clone the MAC adress of penta@U+ to a PCI card running on linux? IS there any work-around this problem? Any information would be helpful, Alex -- Alexander Johansen -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Thu Feb 28 10:06:13 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 9111 invoked by uid 0); 28 Feb 2002 10:06:13 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 28 Feb 2002 10:06:13 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gNRC-00063Y-00; Thu, 28 Feb 2002 11:05:22 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Thu, 28 Feb 2002 11:01:32 +0100 (CET) Received: from mailout10.sul.t-online.com ([194.25.134.21]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gNNU-0005oK-00 for ; Thu, 28 Feb 2002 11:01:32 +0100 Received: from fwd01.sul.t-online.de by mailout10.sul.t-online.com with smtp id 16gNNT-0000QF-05; Thu, 28 Feb 2002 11:01:31 +0100 Received: from diadem.milky.way (04335931990-0001@[217.1.44.230]) by fwd01.sul.t-online.com with esmtp id 16gNNI-0akVFIC; Thu, 28 Feb 2002 11:01:20 +0100 Received: from localhost (crest@localhost) by diadem.milky.way (8.9.3/8.9.3) with ESMTP id KAA02163 for ; Thu, 28 Feb 2002 10:59:31 +0100 Date: Thu, 28 Feb 2002 10:59:31 +0100 (CET) From: rolf.siebrecht@t-online.de (Rolf Siebrecht) To: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: tuning problem In-Reply-To: <200202280337.g1S3bYAa017598@mplayer.dev.hu> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-Sender: 04335931990-0001@t-dialin.net X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: rolf.siebrecht@t-online.de Precedence: bulk X-list: linux-dvb Hi! On Thu, 28 Feb 2002, Arpi wrote: > I've put together a simple app to scan through freq ranges and show signal > strength and other flags (sync, carrier etc) for each mhz. > When I start it, for few minutes it's running fine, and then it lost the > control over the card, just shows zero signal. Even if i start VDR or other > dvb app, i got no channels tuned again, until hard reset :( Recent driver version? Are there syslog messages? I can confirm this kind of phenomenon for the old 0.8.2 driver with a DVB-S 1.3 card. I revived the "stest" program that uses libdvb scanning routines. From time to time the program hangs while syslog reveals DEBI timeout and ARM reset messages. > Any idea, about what am i doing wrong? > > Multidec 8 and the technotrend windows programs could scan the whole range, > so the card/lnb etc should be ok. I just wanted to add such feature to VDR. > > Maybe I should disable/enable some other flags somewhere to set up 'channel > scanning' mode? Where are those flags? It seems there is a risk that the ARM firmware may hang on heavy traffic through the DEBI port. Well, only a certain kind of traffic. For me no hangs appear while reading/writing streams thru DEBI. As said this is true for the 0.8.2 driver. > Or it just drives LNB to some disallowd freq range ? There is no frequency control data sent to the LNB. > What's the relation between FrontendParameters.Frequency, and the LNB limits > (9750, 10600 and switch freq 11700) ? The frontend device relates to tuner hardware module and its properties. LNB settings must be dealt via the SEC device. > For reference, the interesting part of my code: > > > FrontendInfo info; > FrontendParameters param; > if((fd = open("/dev/ost/frontend",O_RDWR)) < 0){ > perror("FRONTEND DEVICE: "); > return -1; > } > printf("selftest=%d\n",ioctl(fd,FE_SELFTEST)); ^^^^^^^^^^^ Does nothing. > printf("get_info=%d\n",ioctl(fd,FE_GET_INFO,&info)); ^^^^^^^^^^^ Returned values are not reliable. An allowed frequency range of 500..2700000 kHz for DVB-S is nonsense IMHO. Unfortunately out-of-range or "silly" input values are not rejected, neither by dvb.o nor tuner.o. > printf("get_param=%d\n",ioctl(fd,FE_GET_FRONTEND,¶m)); > for(freq=info.minFrequency;freq int x=0; > // printf("FREQ=%d\n",freq); > param.Frequency=freq*1000; ^^^^ param.Frequency needs [kHz] for DVB-S. > ioctl(fd,FE_SET_FRONTEND,¶m); > usleep(500000); > ioctl(fd,FE_READ_SIGNAL_STRENGTH,&sstr);x+=sstr; > usleep(100000); > ioctl(fd,FE_READ_SIGNAL_STRENGTH,&sstr);x+=sstr; > usleep(100000); > ioctl(fd,FE_READ_SIGNAL_STRENGTH,&sstr);x+=sstr; > usleep(100000); > ioctl(fd,FE_READ_SIGNAL_STRENGTH,&sstr);x+=sstr; > usleep(100000); > ioctl(fd,FE_READ_STATUS,&status); > printf("FREQ=%10.3f MHz SS=%5d STATUS=0x%02X\n", > (float)(freq*0.001f),sstr,status); > } My experiences with DVB-S 1.3 (VES1893 demodulator) say that the signal strength parameter is not explicit enough to detect a good-quality reception status. Bye, Rolf -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Thu Feb 28 11:58:48 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 12233 invoked by uid 0); 28 Feb 2002 11:58:48 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 28 Feb 2002 11:58:48 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gPBx-0002fs-00; Thu, 28 Feb 2002 12:57:45 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Thu, 28 Feb 2002 12:52:47 +0100 (CET) Received: from mplayerhq.banki.hu ([192.190.173.45] ident=root) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gP78-0002I1-00 for ; Thu, 28 Feb 2002 12:52:46 +0100 Received: from mplayer.dev.hu (arpi@localhost [127.0.0.1]) by localhost (8.12.0/8.12.0.Beta10/Debian 8.12.0.Beta10) with ESMTP id g1SC8bJb020634 for ; Thu, 28 Feb 2002 13:08:37 +0100 Received: (from arpi@localhost) by mplayer.dev.hu (8.12.0/8.12.0.Beta10/Debian 8.12.0.Beta10) id g1SC8beM020633 for linux-dvb@linuxtv.org; Thu, 28 Feb 2002 13:08:37 +0100 Date: Thu, 28 Feb 2002 13:08:37 +0100 Message-Id: <200202281208.g1SC8beM020633@mplayer.dev.hu> From: Arpi To: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: tuning problem In-Reply-To: X-Mailer: GyikSoft Mailer for UNIX v3.5 by Arpi/ESP-team (http://esp-team.scene.hu) X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: arpi@thot.banki.hu Precedence: bulk X-list: linux-dvb Hi, > On Thu, 28 Feb 2002, Arpi wrote: > > I've put together a simple app to scan through freq ranges and show signal > > strength and other flags (sync, carrier etc) for each mhz. > > When I start it, for few minutes it's running fine, and then it lost the > > control over the card, just shows zero signal. Even if i start VDR or othe > r > > dvb app, i got no channels tuned again, until hard reset :( > > Recent driver version? Are there syslog messages? 0.9.4, with a galaxys (siemens) dvb-s 1.3 card no, no messages in syslog or dmesg :( everything seems to be ok, i just lost control over tuning silently :( hmm. i'm using firmware from 0.9.3, maybe it's the prob. ok, i'll try with firmware from 0.9.4 too. > I can confirm this kind of phenomenon for the old 0.8.2 driver with a > DVB-S 1.3 card. I revived the "stest" program that uses libdvb scanning > routines. From time to time the program hangs while syslog reveals DEBI > timeout and ARM reset messages. no such messages here. > > Any idea, about what am i doing wrong? > > > > Multidec 8 and the technotrend windows programs could scan the whole range > , > > so the card/lnb etc should be ok. I just wanted to add such feature to VDR > . > > > > Maybe I should disable/enable some other flags somewhere to set up 'channe > l > > scanning' mode? > > Where are those flags? dunno, i know nothing about such flags, just asked if they exists or not :) > It seems there is a risk that the ARM firmware may hang on heavy traffic > through the DEBI port. Well, only a certain kind of traffic. For me no > hangs appear while reading/writing streams thru DEBI. As said this is true > for the 0.8.2 driver. > > > Or it just drives LNB to some disallowd freq range ? > > There is no frequency control data sent to the LNB. ah. so LNB works like an antenna, and the dvb card filters out the requested freqency band out of the lnb signal? i always thought that oscillator freq is 'sent' to lnb and it 'sends back' only the requested band... > > What's the relation between FrontendParameters.Frequency, and the LNB limi > ts > > (9750, 10600 and switch freq 11700) ? > > The frontend device relates to tuner hardware module and its properties. > LNB settings must be dealt via the SEC device. How can i transform between real absolute freq and these lnb parameters + oscillator freq values? > > For reference, the interesting part of my code: > > > > > > FrontendInfo info; > > FrontendParameters param; > > if((fd = open("/dev/ost/frontend",O_RDWR)) < 0){ > > perror("FRONTEND DEVICE: "); > > return -1; > > } > > printf("selftest=%d\n",ioctl(fd,FE_SELFTEST)); > ^^^^^^^^^^^ > Does nothing. ah. > > printf("get_info=%d\n",ioctl(fd,FE_GET_INFO,&info)); > ^^^^^^^^^^^ > Returned values are not reliable. An allowed frequency range of > 500..2700000 kHz for DVB-S is nonsense IMHO. Unfortunately out-of-range > or "silly" input values are not rejected, neither by dvb.o nor tuner.o. I see. What are the real allowed values? > > > printf("get_param=%d\n",ioctl(fd,FE_GET_FRONTEND,¶m)); > > for(freq=info.minFrequency;freq > int x=0; > > // printf("FREQ=%d\n",freq); > > param.Frequency=freq*1000; > ^^^^ > param.Frequency needs [kHz] for DVB-S. hmm. it may explains my results, anyway i remember reading somewhere it's Hz. > > ioctl(fd,FE_SET_FRONTEND,¶m); > > usleep(500000); > > ioctl(fd,FE_READ_SIGNAL_STRENGTH,&sstr);x+=sstr; > > usleep(100000); > > ioctl(fd,FE_READ_SIGNAL_STRENGTH,&sstr);x+=sstr; > > usleep(100000); > > ioctl(fd,FE_READ_SIGNAL_STRENGTH,&sstr);x+=sstr; > > usleep(100000); > > ioctl(fd,FE_READ_SIGNAL_STRENGTH,&sstr);x+=sstr; > > usleep(100000); > > ioctl(fd,FE_READ_STATUS,&status); > > printf("FREQ=%10.3f MHz SS=%5d STATUS=0x%02X\n", > > (float)(freq*0.001f),sstr,status); > > } > > My experiences with DVB-S 1.3 (VES1893 demodulator) say that the signal > strength parameter is not explicit enough to detect a good-quality > reception status. I'll also use other status flags (signal, sync, carrier) to get more accurate freq. A'rpi / Astral & ESP-team -- Developer of MPlayer, the Movie Player for Linux - http://www.MPlayerHQ.hu -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Thu Feb 28 12:46:01 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 31430 invoked by uid 0); 28 Feb 2002 12:46:01 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 28 Feb 2002 12:46:01 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gPvo-0005qa-00; Thu, 28 Feb 2002 13:45:08 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Thu, 28 Feb 2002 13:41:31 +0100 (CET) Received: from mail.uklinux.net ([80.84.72.21] helo=s1.uklinux.net) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gPsH-0005aE-00 for ; Thu, 28 Feb 2002 13:41:30 +0100 Received: from cyw.uklinux.net (bts-0277.dialup.zetnet.co.uk [194.247.49.21]) by s1.uklinux.net (8.11.6/8.11.6) with ESMTP id g1SCfNM13324; Thu, 28 Feb 2002 12:41:23 GMT Received: from there (localhost [127.0.0.1]) by cyw.uklinux.net (8.11.6/8.11.2) with SMTP id g1SAw0B03295; Thu, 28 Feb 2002 10:58:00 GMT Message-Id: <200202281058.g1SAw0B03295@cyw.uklinux.net> Content-Type: text/plain; charset="iso-8859-1" From: davep Reply-To: d.pickles@bcs.org.uk To: lauri.pesonen@firsthop.com Subject: [linux-dvb] Re: tuning problem Date: Thu, 28 Feb 2002 10:58:00 +0000 X-Mailer: KMail [version 1.3.2] References: <200202280337.g1S3bYAa017598@mplayer.dev.hu> <20020228085348.B17460@firsthop.com> In-Reply-To: <20020228085348.B17460@firsthop.com> Cc: linux-dvb@linuxtv.org MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: davep@cyw.uklinux.net Precedence: bulk X-list: linux-dvb On Thursday 28 February 2002 06:53, you wrote: > Hi, > > I took a look at the signal strenght code in the driver a while back and > at that time there was no implementation. AFAIK the code always returned > zero. do a "grep -5 -i strength *" in the driver dir. > > > Actually there seems to be an implementation in VES1893.c. L64781.c, > SP8870.c, and stv0299.c all return zero. When I tried it, I could not get > any meaningful values out of the driver. This patch will produce a signal strength figure from boards using the L64781 chip (eg DVB-T). I don't know what the number means - I get 0x2f to 0x31 on my DVB-T card - though I believe a bigger number corresponds to a stronger signal. --- L64781.c.old Thu Feb 28 09:48:30 2002 +++ L64781.c Thu Feb 28 09:53:49 2002 @@ -453,7 +453,7 @@ case FE_READ_SIGNAL_STRENGTH: { s32 *signal=(s32 *) arg; - *signal = 0; + *signal = read_reg (client, 0x0e); break; } -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Thu Feb 28 17:22:45 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 23844 invoked by uid 0); 28 Feb 2002 17:22:45 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 28 Feb 2002 17:22:45 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gUFe-0003s8-00; Thu, 28 Feb 2002 18:21:54 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Thu, 28 Feb 2002 18:16:55 +0100 (CET) Received: from mailout03.sul.t-online.com ([194.25.134.81]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gUAo-0003bB-00 for ; Thu, 28 Feb 2002 18:16:54 +0100 Received: from fwd09.sul.t-online.de by mailout03.sul.t-online.com with smtp id 16gRX1-0002ka-0A; Thu, 28 Feb 2002 15:27:39 +0100 Received: from diadem.milky.way (04335931990-0001@[62.157.31.240]) by fwd09.sul.t-online.com with esmtp id 16gRWq-0Z5w0GC; Thu, 28 Feb 2002 15:27:28 +0100 Received: from localhost (crest@localhost) by diadem.milky.way (8.9.3/8.9.3) with ESMTP id PAA02224 for ; Thu, 28 Feb 2002 15:25:56 +0100 Date: Thu, 28 Feb 2002 15:25:56 +0100 (CET) From: rolf.siebrecht@t-online.de (Rolf Siebrecht) To: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: tuning problem In-Reply-To: <200202281208.g1SC8beM020633@mplayer.dev.hu> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-Sender: 04335931990-0001@t-dialin.net X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: rolf.siebrecht@t-online.de Precedence: bulk X-list: linux-dvb Hi! On Thu, 28 Feb 2002, Arpi wrote: > > > Or it just drives LNB to some disallowd freq range ? > > There is no frequency control data sent to the LNB. > ah. so LNB works like an antenna, and the dvb card filters out the requested > freqency band out of the lnb signal? > i always thought that oscillator freq is 'sent' to lnb and it 'sends back' > only the requested band... Okay, a *band* information is sent. It is the well-known 22-kHz resp. DiSEqC control. It's just a "digital" info: either Low-band or High-band. The LNB-internal oscillator freq is switched as part of this info. But no command is sent that may "tune" an LNB to a (single) out-of-band frequency. > > > What's the relation between FrontendParameters.Frequency, and the LNB limi > > ts > > > (9750, 10600 and switch freq 11700) ? > > The frontend device relates to tuner hardware module and its properties. > > LNB settings must be dealt via the SEC device. > How can i transform between real absolute freq and these lnb parameters + > oscillator freq values? // transponder_freq given as [MHz] if (transponder_freq > 11700) { tuner_freq = transponder_freq - 10600; send_via_SEC_device (HI_BAND); } else { tuner_freq = transponder_freq - 9750; send_via_SEC_device (LO_BAND); } if (tuner_freq >= 950 && tuner_freq <= 2150) { // see below FeParam.Frequency = tuner_freq * 1000; // MHz -> kHz set_via_FE_device (FeParam); } else ... dvbtune, dvbstream, libdvb,... show equivalent code. > > > printf("get_info=%d\n",ioctl(fd,FE_GET_INFO,&info)); > > Returned values are not reliable. An allowed frequency range of > > 500..2700000 kHz for DVB-S is nonsense IMHO. Unfortunately out-of-range > > or "silly" input values are not rejected, neither by dvb.o nor tuner.o. > I see. What are the real allowed values? I would rely on the parameters from the tuner datasheet. The BSRV2-301A of the DVB-S 1.3 card has the usual input frequency range of 950..2150 MHz. Bye, Rolf -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Mar 01 08:41:58 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 30735 invoked by uid 0); 1 Mar 2002 08:41:58 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 1 Mar 2002 08:41:58 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gib9-0003Ls-00; Fri, 01 Mar 2002 09:41:03 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 01 Mar 2002 09:38:06 +0100 (CET) Received: from mailout10.sul.t-online.com ([194.25.134.21]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gWAv-0002gg-00 for ; Thu, 28 Feb 2002 20:25:10 +0100 Received: from fwd06.sul.t-online.de by mailout10.sul.t-online.com with smtp id 16gWAu-0000Ec-00; Thu, 28 Feb 2002 20:25:08 +0100 Received: from dh3mb.ampr.org (520062039130-0001@[217.81.196.37]) by fmrl06.sul.t-online.com with esmtp id 16gWAf-1fqA4GC; Thu, 28 Feb 2002 20:24:53 +0100 Date: Thu, 28 Feb 2002 21:28:55 +0100 (CET) From: Johann Hanne X-X-Sender: To: cc: Subject: [linux-dvb] 768x576, 720x576, 704x576?! (was: black borders in xawtv) In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-Sender: 520062039130-0001@t-dialin.net X-Approved-By: dirk@convergence.de X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: dirk@convergence.de Precedence: bulk X-list: linux-dvb On Tue, 26 Feb 2002 jonathan.foster@philips.com wrote: > PAL is broadcast as 720x576 digital video. But the analog signal is > only 702 pixels wide, so 9 pixels each side are left black. > Yep, crop the image before you display it. Thanks for the answer. Now I have some more questions. ;-) Analog PAL is 702x576 (really? not 704x576?). The usual TV has an aspect ratio of 4:3, so the picture is somehow scaled to 768x576. So far, so good. "Digital PAL" is broadcast as 720x576 (why 720 and not 702?). However, as the source is the analog PAL 702x576 picture, the 9 pixel borders on each side are encoded into the MPEG2 stream. Again, the usual TV has an aspect ratio of 4:3. When scaling from 720 to 768 i see two problems: - The black borders are still there as they get scaled as part of the picture - The picture is NOT the same as the analog one: The analog one gets scaled horizontally by the factor 768/702, the digital one gets scaled horitontally by the factor 768/720. So the analog picture is slightly more "stretched" horizontally?! What I want is simply to get a good picture output to my TV (without using the DVB board video out, but by using the TV out of my graphics board). Just cropping the picture is not possible, as the TV is fixed to 4:3 and i want to use the whole screen! So, as far as i see, there are two possible solutions: - Take the 768x576 picture with the black borders and scale it horizontally AND vertically. The black borders at the left and right side will dissapear, but parts of the picture at the top and the bottom edge will also not be visible. - Take the 768x576 picture with the black borders and scale it horizontally ONLY. The black borders at the left and right side will dissapear, but the picture will be stretched horizontally some more. What's the way that is used on the video out of the DVB card? I can't see any black boarders this way?! Thanks in advance, Jonny -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Mar 01 09:43:51 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 17685 invoked by uid 0); 1 Mar 2002 09:43:51 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 1 Mar 2002 09:43:51 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gjZ1-00077r-00; Fri, 01 Mar 2002 10:42:55 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 01 Mar 2002 10:39:20 +0100 (CET) Received: from gw-nl5.philips.com ([212.153.235.99]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gjVY-0006jh-00 for ; Fri, 01 Mar 2002 10:39:20 +0100 Received: from smtpscan-nl1.philips.com (localhost.philips.com [127.0.0.1]) by gw-nl5.philips.com with ESMTP id KAA01365; Fri, 1 Mar 2002 10:38:44 +0100 (MET) (envelope-from immo.benjes@philips.com) From: immo.benjes@philips.com Received: from smtpscan-nl1.philips.com(130.139.36.21) by gw-nl5.philips.com via mwrap (4.0a) id xma001344; Fri, 1 Mar 02 10:38:44 +0100 Received: from smtprelay-nl1.philips.com (localhost [127.0.0.1]) by smtpscan-nl1.philips.com (8.9.3/8.8.5-1.2.2m-19990317) with ESMTP id KAA05578; Fri, 1 Mar 2002 10:38:44 +0100 (MET) Received: from hbg001soh.diamond.philips.com (e1soh01.diamond.philips.com [130.143.165.212]) by smtprelay-nl1.philips.com (8.9.3/8.8.5-1.2.2m-19990317) with ESMTP id JAA02304; Fri, 1 Mar 2002 09:38:43 GMT To: Johann Hanne , Subject: [linux-dvb] Re: 768x576, 720x576, 704x576?! (was: black borders in xawtv) Date: Fri, 1 Mar 2002 09:38:40 +0000 Message-ID: X-MIMETrack: Serialize by Router on hbg001soh/H/SERVER/PHILIPS(Release 5.0.5 |September 22, 2000) at 01/03/2002 10:57:34, Serialize complete at 01/03/2002 10:57:34 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: immo.benjes@philips.com Precedence: bulk X-list: linux-dvb On Thursday 28 Feb 2002 8:28 pm, you wrote: > On Tue, 26 Feb 2002 jonathan.foster@philips.com wrote: > > PAL is broadcast as 720x576 digital video. But the analog signal is > > only 702 pixels wide, so 9 pixels each side are left black. > >wide, so 9 pixels each side are left black. > > > > Yep, crop the image before you display it. > > Thanks for the answer. Now I have some more questions. ;-) > > Analog PAL is 702x576 (really? not 704x576?). Analog PAL has no horizontal resolution. It is analog. And it has 575 lines (2 half lines). If you sample a PAL signal with 13.5 MHz you would end up with a resolution of 702x576 (there are no half lines in digital) with an active line of 52usec. The 704 you often see comes from the MPEG coding as you require blocks of 8. >The usual TV has an aspect > ratio of 4:3, so the picture is somehow scaled to 768x576. So far, so > good. > > "Digital PAL" is broadcast as 720x576 (why 720 and not 702?). Good question. Note that the active digital line acording to ITU 601 is 53,3333 usec instead of 52 usec. To be compatible with ITU-470 (PAL) the first and the last 9 samples are set to the blanking level. The aspect ratio of 4:3 is defined for the analog PAL signal (52 usec with 575 active lines). >However, as > the source is the analog PAL 702x576 picture, Not necessarily. If you use old PAL content yes, but in the studio they are working with ITU 601 (720x576). New content will be in that format. >the 9 pixel borders on each > side are encoded into the MPEG2 stream. Again, the usual TV has an aspect > ratio of 4:3. When scaling from 720 to 768 i see two problems: > - The black borders are still there as they get scaled as part of > the picture > - The picture is NOT the same as the analog one: The analog one gets > scaled horizontally by the factor 768/702, the digital one gets scaled > horitontally by the factor 768/720. So the analog picture is slightly > more "stretched" horizontally?! See above: the definition of 4:3. Streching the 702 to 768 is more accurate. > > What I want is simply to get a good picture output to my TV (without > using the DVB board video out, but by using the TV out of my graphics > board). Than make sure you have RGB output :-) ?Just cropping the picture is not possible, as the TV is fixed to > 4:3 and i want to use the whole screen! > So, as far as i see, there are two possible solutions: > - Take the 768x576 picture with the black borders and scale it > horizontally AND vertically. The black boards should disapear anyway when your graphic cards generates a correct timing. If you see black bars the timing of your card isn't correct. Play around with your X modelines. The black borders at the left and right > side will dissapear, but parts of the picture at the top and the > bottom edge will also not be visible. > - Take the 768x576 picture with the black borders and scale it > horizontally ONLY. The black borders at the left and right side will > dissapear, but the picture will be stretched horizontally some more. Adjust this with your modeline. > > What's the way that is used on the video out of the DVB card? I can't see > any black boarders this way?! They have a correct timing. Regards Immo > > Thanks in advance, Jonny -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Mar 01 09:50:48 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 22222 invoked by uid 0); 1 Mar 2002 09:50:48 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 1 Mar 2002 09:50:48 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gjes-0007fR-00; Fri, 01 Mar 2002 10:48:58 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 01 Mar 2002 10:46:37 +0100 (CET) Received: from anice-101-1-5-145.abo.wanadoo.fr ([193.252.185.145] helo=mxmlab.com) by chambertin.convergence.de with smtp (Exim 3.33 #2 ) id 16gj0O-0005Bn-00 for ; Fri, 01 Mar 2002 10:07:08 +0100 Received: (qmail 2527 invoked by uid 8); 1 Mar 2002 09:08:05 -0000 Received: from pc-00010.mxm (192.168.0.10, claiming to be "jeanclaude") by e-smith.mxm with SMTP id smtpd4RpPgg; Fri, 01 Mar 2002 04:07:58 EST Message-ID: <004801c1c100$f7bb42d0$0a00a8c0@jeanclaude> From: "Jean-Claude Repetto" To: References: Subject: [linux-dvb] Re: 768x576, 720x576, 704x576?! (was: black borders in xawtv) Date: Fri, 1 Mar 2002 10:10:44 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 X-AntiVirus: scanned for viruses by AMaViS 0.2.1 (http://amavis.org/) X-Approved-By: dirk@convergence.de X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: dirk@convergence.de Precedence: bulk X-list: linux-dvb ----- Original Message ----- From: "Johann Hanne" To: Cc: Sent: Thursday, February 28, 2002 9:28 PM Subject: [linux-dvb] 768x576, 720x576, 704x576?! (was: black borders in xawtv) > > Analog PAL is 702x576 (really? not 704x576?). Analog PAL is 52µs x 576 lines. There are no horizontal pixels, since the signal is analog. Each line is 52µs long. The number of horizontal pixels you get when you digitize the analog signal depends on the sample frequency. If you use the standard 13.5 Mz sample frequency, you get 13.5 x 52 = 702 pixels/line. Jean-Claude -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Mar 01 09:50:53 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 22228 invoked by uid 0); 1 Mar 2002 09:50:52 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 1 Mar 2002 09:50:52 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gjf8-0007mp-00; Fri, 01 Mar 2002 10:49:14 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 01 Mar 2002 10:47:36 +0100 (CET) Received: from [217.57.106.41] (helo=lasersat.it) by chambertin.convergence.de with smtp (Exim 3.33 #2 ) id 16gjK2-0005f0-00 for ; Fri, 01 Mar 2002 10:27:27 +0100 Received: (qmail 5440 invoked by uid 48); 1 Mar 2002 09:32:23 -0000 Date: 1 Mar 2002 09:32:23 -0000 Message-ID: <20020301093223.5439.qmail@lasersat.it> To: linux-dvb@linuxtv.org Subject: [linux-dvb] info in ts From: X-Sender: <> X-Mailer: PHP X-Approved-By: dirk@convergence.de X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: dirk@convergence.de Precedence: bulk X-list: linux-dvb Hi, my idea is to write a program to view the info send with the transport stream:is this possible?How to do?May someone help me? thanks IP Mittente: 156.148.2.22 E-mail inviata da http://www.gratismania.tv -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Mar 01 13:24:22 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 25896 invoked by uid 0); 1 Mar 2002 13:24:22 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 1 Mar 2002 13:24:22 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gn0S-0007FE-00; Fri, 01 Mar 2002 14:23:28 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 01 Mar 2002 14:18:15 +0100 (CET) Received: from aperol.lkn.e-technik.tu-muenchen.de ([129.187.222.163] helo=lkn.e-technik.tu-muenchen.de ident=root) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gmvP-0006nK-00 for ; Fri, 01 Mar 2002 14:18:15 +0100 Received: from wanadoo.es (sun [10.152.4.16]) by lkn.e-technik.tu-muenchen.de (8.11.3/8.11.3/SuSE Linux 8.11.1-0.5) with ESMTP id g21DHbE28466 for ; Fri, 1 Mar 2002 14:17:37 +0100 Sender: navamuel@lkn.ei.tum.de Message-ID: <3C7F7F96.B54BADFB@wanadoo.es> Date: Fri, 01 Mar 2002 14:18:14 +0100 From: Navamuel Castillo Juan Jose Reply-To: jjonc@eikon.tum.de X-Mailer: Mozilla 4.76 [en] (X11; U; SunOS 5.8 sun4u) X-Accept-Language: en MIME-Version: 1.0 To: linux-dvb@linuxtv.org Subject: [linux-dvb] Installing DVB-C card References: Content-type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: jjonavamuel@wanadoo.es Precedence: bulk X-list: linux-dvb -- Unable to decode HTML file!! -- -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Mar 01 13:32:55 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 30419 invoked by uid 0); 1 Mar 2002 13:32:55 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 1 Mar 2002 13:32:55 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gn8d-0000Ae-00; Fri, 01 Mar 2002 14:31:55 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 01 Mar 2002 14:30:09 +0100 (CET) Received: from aperol.lkn.e-technik.tu-muenchen.de ([129.187.222.163] helo=lkn.e-technik.tu-muenchen.de ident=root) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gn6v-0008RN-00 for ; Fri, 01 Mar 2002 14:30:09 +0100 Received: from wanadoo.es (sun [10.152.4.16]) by lkn.e-technik.tu-muenchen.de (8.11.3/8.11.3/SuSE Linux 8.11.1-0.5) with ESMTP id g21DTVE28834 for ; Fri, 1 Mar 2002 14:29:31 +0100 Sender: navamuel@lkn.ei.tum.de Message-ID: <3C7F8260.4C157EDE@wanadoo.es> Date: Fri, 01 Mar 2002 14:30:08 +0100 From: Navamuel Castillo Juan Jose Reply-To: jjonc@eikon.tum.de X-Mailer: Mozilla 4.76 [en] (X11; U; SunOS 5.8 sun4u) X-Accept-Language: en MIME-Version: 1.0 To: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: Installing dvb card ??? References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: jjonavamuel@wanadoo.es Precedence: bulk X-list: linux-dvb Hi, I'm trying to install the drivers from linuxtv for siemens DVB card ( siemens.0.9-latest ) but I'm having problems that I don't understand (I'm new with Linux) I followed the instrunctions in INSTALL: 1.- in DVB/driver > make no problems 2.- in DVB/driver > make insmod no problems 3.- in DVB/libdvb > make no problems 4.- ind DVB/apps/tuxzap > ./autogen.sh here the problems came! dvb1:~/DVB/apps/tuxzap # ./autogen.sh **Warning**: I am going to run `configure' with no arguments. If you wish to pass any to it, please specify them on the `./autogen.sh' command line. processing . Running aclocal ... aclocal: configure.in: 99: macro `AM_PATH_GTK' not found in library Running autoheader... autoheader: error: AC_CONFIG_HEADERS not found in configure.in Running automake --gnu ... automake: configure.in: installing `./install-sh' automake: configure.in: installing `./mkinstalldirs' automake: configure.in: installing `./missing' automake: configure.in: installing `./config.guess' automake: configure.in: installing `./config.sub' configure.in: 14: required file `./config.h.in' not found Running autoconf ... configure.in:12: error: possibly undefined macro: AM_INIT_AUTOMAKE configure.in:14: error: possibly undefined macro: AM_CONFIG_HEADER configure.in:17: error: possibly undefined macro: AM_MAINTAINER_MODE configure.in:25: error: possibly undefined macro: AM_PROG_CC_STDC configure.in:99: error: possibly undefined macro: AM_PATH_GTK Running ./configure ... ./configure: line 959: syntax error near unexpected token `AM_INIT_AUTOMAKE($PACKAGE,' ./configure: line 959: `AM_INIT_AUTOMAKE($PACKAGE, $VERSION)' dvb1:~/DVB/apps/tuxzap # What are those "AM_PATH_GTK", "AC_CONFIG_HEADERS" and so on? I have tried to remove the directory and make the instalation again, but I think I should make something more with the modules. How can I remove everything completely to start again? Thank you Ciao Juanjo Navamuel -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Mar 01 13:45:05 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 32023 invoked by uid 0); 1 Mar 2002 13:45:05 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 1 Mar 2002 13:45:05 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gnKR-0000sh-00; Fri, 01 Mar 2002 14:44:07 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 01 Mar 2002 14:41:59 +0100 (CET) Received: from mailout09.sul.t-online.com ([194.25.134.84]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gnIN-0000h4-00 for ; Fri, 01 Mar 2002 14:41:59 +0100 Received: from fwd03.sul.t-online.de by mailout09.sul.t-online.com with smtp id 16gnIM-00025U-06; Fri, 01 Mar 2002 14:41:58 +0100 Received: from schmitt.schmitt.mine.nu (320079924130-0001@[80.131.14.3]) by fmrl03.sul.t-online.com with esmtp id 16gnIE-0ErBq4C; Fri, 1 Mar 2002 14:41:50 +0100 Received: from hiro (hiro.schmitt.mine.nu [192.168.1.2]) by schmitt.schmitt.mine.nu (8.11.6/8.11.6/SuSE Linux 0.5) with ESMTP id g21Debm13810; Fri, 1 Mar 2002 14:40:37 +0100 Date: Fri, 01 Mar 2002 14:39:36 +0100 From: Thomas Schmitt Reply-To: Thomas Schmitt To: jjonc@eikon.tum.de, linux-dvb@linuxtv.org Subject: [linux-dvb] Re: Installing dvb card ??? Message-ID: <3280000.1014989976@hiro> In-Reply-To: <3C7F8260.4C157EDE@wanadoo.es> References: <3C7F8260.4C157EDE@wanadoo.es> X-Mailer: Mulberry/2.1.2 (Linux/x86) MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1; format=flowed Content-Transfer-Encoding: quoted-printable Content-Disposition: inline X-Virus-Scanned: by AMaViS-perl11-milter (http://amavis.org/) X-Sender: 320079924130-0001@t-dialin.net X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: lists@schmitt.mine.nu Precedence: bulk X-list: linux-dvb --On Freitag, M=E4rz 01, 2002 14:30:08 +0100 Navamuel Castillo Juan Jose=20 wrote: > Hi, > > I'm trying to install the drivers from linuxtv for siemens DVB card ( > siemens.0.9-latest ) but I'm having problems that I don't understand (I'm > new with Linux) > > I followed the instrunctions in INSTALL: > > 1.- in DVB/driver > make > > no problems > > 2.- in DVB/driver > make insmod > > no problems > > 3.- in DVB/libdvb > make > > no problems > > 4.- ind DVB/apps/tuxzap > ./autogen.sh > > here the problems came! > > > > dvb1:~/DVB/apps/tuxzap # ./autogen.sh > **Warning**: I am going to run `configure' with no arguments. > If you wish to pass any to it, please specify them on the > `./autogen.sh' command line. > > processing . > Running aclocal ... > aclocal: configure.in: 99: macro `AM_PATH_GTK' not found in library > Running autoheader... > autoheader: error: AC_CONFIG_HEADERS not found in configure.in > Running automake --gnu ... > automake: configure.in: installing `./install-sh' > automake: configure.in: installing `./mkinstalldirs' > automake: configure.in: installing `./missing' > automake: configure.in: installing `./config.guess' > automake: configure.in: installing `./config.sub' > configure.in: 14: required file `./config.h.in' not found > Running autoconf ... > configure.in:12: error: possibly undefined macro: AM_INIT_AUTOMAKE > configure.in:14: error: possibly undefined macro: AM_CONFIG_HEADER > configure.in:17: error: possibly undefined macro: = AM_MAINTAINER_MODE > configure.in:25: error: possibly undefined macro: AM_PROG_CC_STDC > configure.in:99: error: possibly undefined macro: AM_PATH_GTK > Running ./configure ... > ./configure: line 959: syntax error near unexpected token > `AM_INIT_AUTOMAKE($PACKAGE,' > > ./configure: line 959: `AM_INIT_AUTOMAKE($PACKAGE, $VERSION)' > dvb1:~/DVB/apps/tuxzap # > > > What are those "AM_PATH_GTK", "AC_CONFIG_HEADERS" and so on? > > I have tried to remove the directory and make the instalation again, but > I think I should make something more with the > modules. > How can I remove everything completely to start again? > It seems that the gtk-devel package is not installed. Regards Thomas Schmitt --- "Mr. Ghandi, what do you think about western civilization?" "Oh, that would be a good idea." -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Mar 01 13:59:12 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 4085 invoked by uid 0); 1 Mar 2002 13:59:12 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 1 Mar 2002 13:59:12 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gnY8-0001ta-00; Fri, 01 Mar 2002 14:58:16 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 01 Mar 2002 14:56:06 +0100 (CET) Received: from ns.numeric.ru ([62.84.106.51]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gnW2-0001Z4-00 for ; Fri, 01 Mar 2002 14:56:06 +0100 Received: from m3search (m3search.in.numeric.ru [192.168.0.17]) by ns.numeric.ru (8.11.6/8.11.6/SuSE Linux 0.5) with SMTP id g21DvC402337 for ; Fri, 1 Mar 2002 16:57:12 +0300 From: "Andrew Edunov" To: Subject: [linux-dvb] DVB for internet Date: Fri, 1 Mar 2002 16:58:16 +0300 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="koi8-r" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 X-Virus-Scanned: by AMaViS-perl11-milter (http://amavis.org/) X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: Andrew.Edunov@numeric.ru Precedence: bulk X-list: linux-dvb Hi All !!! I have a problem with my SkyStar1 DVB card. Try to explain: After installation modules and network activation I try to set up card on concrete transponder with 'tuxzap' program. Do 'set' and program give me response: ********************************** set_vpid: Device or resource busy set_apid: Device or resource busy ********************************** What does it mean !!! Help me please. I'm in a fire :-)))) -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Mar 01 14:04:47 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 8394 invoked by uid 0); 1 Mar 2002 14:04:46 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 1 Mar 2002 14:04:46 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gnd3-00032Y-00; Fri, 01 Mar 2002 15:03:21 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 01 Mar 2002 15:01:17 +0100 (CET) Received: from gw-nl5.philips.com ([212.153.235.99]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gnb3-0002pb-00 for ; Fri, 01 Mar 2002 15:01:17 +0100 Received: from smtpscan-nl3.philips.com (localhost.philips.com [127.0.0.1]) by gw-nl5.philips.com with ESMTP id PAA20601 for ; Fri, 1 Mar 2002 15:00:43 +0100 (MET) (envelope-from immo.benjes@philips.com) From: immo.benjes@philips.com Received: from smtpscan-nl3.philips.com(130.139.36.23) by gw-nl5.philips.com via mwrap (4.0a) id xma020597; Fri, 1 Mar 02 15:00:45 +0100 Received: from smtprelay-nl1.philips.com (localhost [127.0.0.1]) by smtpscan-nl3.philips.com (8.9.3/8.8.5-1.2.2m-19990317) with ESMTP id PAA12765 for ; Fri, 1 Mar 2002 15:00:42 +0100 (MET) Received: from hbg001soh.diamond.philips.com (e1soh01.diamond.philips.com [130.143.165.212]) by smtprelay-nl1.philips.com (8.9.3/8.8.5-1.2.2m-19990317) with ESMTP id OAA00056 for ; Fri, 1 Mar 2002 14:00:41 GMT To: Subject: [linux-dvb] Re: Installing dvb card ??? Date: Fri, 1 Mar 2002 14:00:33 +0000 Message-ID: X-MIMETrack: Serialize by Router on hbg001soh/H/SERVER/PHILIPS(Release 5.0.5 |September 22, 2000) at 01/03/2002 15:19:33, Serialize complete at 01/03/2002 15:19:33 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: immo.benjes@philips.com Precedence: bulk X-list: linux-dvb Hi, I am not sure but it looks like version problem with automake and autoconf. I am not sure for what version of automake autoconf the dvb stuff is written but there are often problems with automake 1.5 and autoconf 2.52. Somehow these new versions are not backwards compatible. Check autoconf --version automake --version If you have automake 1.5 and autoconf 2.52 try either to convert the old autoconf files to new ones (there are tools to convert old autoconf files to new ones, can't remember the name though) or go back to autoconf 2.13 and automake 1.4-p5. Regards Immo > dvb1:~/DVB/apps/tuxzap # ./autogen.sh > **Warning**: I am going to run `configure' with no arguments. > If you wish to pass any to it, please specify them on the > `./autogen.sh' command line. > > processing . > Running aclocal ... > aclocal: configure.in: 99: macro `AM_PATH_GTK' not found in library > Running autoheader... > autoheader: error: AC_CONFIG_HEADERS not found in configure.in > Running automake --gnu ... > automake: configure.in: installing `./install-sh' > automake: configure.in: installing `./mkinstalldirs' > automake: configure.in: installing `./missing' > automake: configure.in: installing `./config.guess' > automake: configure.in: installing `./config.sub' > configure.in: 14: required file `./config.h.in' not found > Running autoconf ... > configure.in:12: error: possibly undefined macro: AM_INIT_AUTOMAKE > configure.in:14: error: possibly undefined macro: AM_CONFIG_HEADER > configure.in:17: error: possibly undefined macro: AM_MAINTAINER_MODE > configure.in:25: error: possibly undefined macro: AM_PROG_CC_STDC > configure.in:99: error: possibly undefined macro: AM_PATH_GTK > Running ./configure ... > ./configure: line 959: syntax error near unexpected token > `AM_INIT_AUTOMAKE($PACKAGE,' > > ./configure: line 959: `AM_INIT_AUTOMAKE($PACKAGE, $VERSION)' > dvb1:~/DVB/apps/tuxzap # > > > What are those "AM_PATH_GTK", "AC_CONFIG_HEADERS" and so on? > > I have tried to remove the directory and make the instalation again, but I > think I should make something more with the > modules. > How can I remove everything completely to start again? > > Thank you > Ciao > Juanjo Navamuel -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Mar 01 14:04:48 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 8401 invoked by uid 0); 1 Mar 2002 14:04:48 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 1 Mar 2002 14:04:48 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gnd3-00032U-00; Fri, 01 Mar 2002 15:03:21 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 01 Mar 2002 15:01:42 +0100 (CET) Received: from aperol.lkn.e-technik.tu-muenchen.de ([129.187.222.163] helo=lkn.e-technik.tu-muenchen.de ident=root) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gnbR-0002pq-00 for ; Fri, 01 Mar 2002 15:01:41 +0100 Received: from wanadoo.es (sun [10.152.4.16]) by lkn.e-technik.tu-muenchen.de (8.11.3/8.11.3/SuSE Linux 8.11.1-0.5) with ESMTP id g21E11E31328; Fri, 1 Mar 2002 15:01:02 +0100 Sender: navamuel@lkn.ei.tum.de Message-ID: <3C7F89C3.3AD719CF@wanadoo.es> Date: Fri, 01 Mar 2002 15:01:39 +0100 From: Navamuel Castillo Juan Jose Reply-To: jjonc@eikon.tum.de X-Mailer: Mozilla 4.76 [en] (X11; U; SunOS 5.8 sun4u) X-Accept-Language: en MIME-Version: 1.0 To: Thomas Schmitt CC: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: Installing dvb card ??? References: <3C7F8260.4C157EDE@wanadoo.es> <3280000.1014989976@hiro> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: jjonavamuel@wanadoo.es Precedence: bulk X-list: linux-dvb Thank you, Thomas. I have look at my directories and I have found something similar to gtk.m4 it is gtkgl.m4 and it includes code related to 'AM_PATH_GTK' but I don't understand it: # AM_PATH_GTKGL([ACTION-IF-FOUND [,ACTION-IF-NOT-FOUND]]) AC_DEFUN(AM_PATH_GTKGL, [ AC_REQUIRE([AM_PATH_GTK]) AC_PROVIDE([AM_PATH_GTKGL]) Should I install anyway the gtk-devel package? Thank you Juanjo Navamuel Thomas Schmitt wrote: > > 4.- ind DVB/apps/tuxzap > ./autogen.sh > > > > here the problems came! > > > > > > > > dvb1:~/DVB/apps/tuxzap # ./autogen.sh > > **Warning**: I am going to run `configure' with no arguments. > > If you wish to pass any to it, please specify them on the > > `./autogen.sh' command line. > > > > processing . > > Running aclocal ... > > aclocal: configure.in: 99: macro `AM_PATH_GTK' not found in library > > Running autoheader... > > autoheader: error: AC_CONFIG_HEADERS not found in configure.in > > Running automake --gnu ... > > automake: configure.in: installing `./install-sh' > > automake: configure.in: installing `./mkinstalldirs' > > automake: configure.in: installing `./missing' > > automake: configure.in: installing `./config.guess' > > automake: configure.in: installing `./config.sub' > > configure.in: 14: required file `./config.h.in' not found > > Running autoconf ... > > configure.in:12: error: possibly undefined macro: AM_INIT_AUTOMAKE > > configure.in:14: error: possibly undefined macro: AM_CONFIG_HEADER > > configure.in:17: error: possibly undefined macro: AM_MAINTAINER_MODE > > configure.in:25: error: possibly undefined macro: AM_PROG_CC_STDC > > configure.in:99: error: possibly undefined macro: AM_PATH_GTK > > Running ./configure ... > > ./configure: line 959: syntax error near unexpected token > > `AM_INIT_AUTOMAKE($PACKAGE,' > > > > ./configure: line 959: `AM_INIT_AUTOMAKE($PACKAGE, $VERSION)' > > dvb1:~/DVB/apps/tuxzap # > > > > > > What are those "AM_PATH_GTK", "AC_CONFIG_HEADERS" and so on? > > > > I have tried to remove the directory and make the instalation again, but > > I think I should make something more with the > > modules. > > How can I remove everything completely to start again? > > > > It seems that the gtk-devel package is not installed. > > Regards > Thomas Schmitt > > --- > > "Mr. Ghandi, what do you think about western civilization?" > "Oh, that would be a good idea." -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Mar 01 14:43:55 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 18941 invoked by uid 0); 1 Mar 2002 14:43:55 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 1 Mar 2002 14:43:55 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16goFR-0006TH-00; Fri, 01 Mar 2002 15:43:01 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 01 Mar 2002 15:40:01 +0100 (CET) Received: from gw-nl4.philips.com ([212.153.190.6]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16goCX-00063l-00 for ; Fri, 01 Mar 2002 15:40:01 +0100 Received: from smtpscan-nl4.philips.com (localhost.philips.com [127.0.0.1]) by gw-nl4.philips.com with ESMTP id PAA17969; Fri, 1 Mar 2002 15:38:37 +0100 (CET) (envelope-from immo.benjes@philips.com) From: immo.benjes@philips.com Received: from smtpscan-nl4.philips.com(130.139.36.24) by gw-nl4.philips.com via mwrap (4.0a) id xma017960; Fri, 1 Mar 02 15:38:37 +0100 Received: from smtprelay-nl1.philips.com (localhost [127.0.0.1]) by smtpscan-nl4.philips.com (8.9.3/8.8.5-1.2.2m-19990317) with ESMTP id PAA18312; Fri, 1 Mar 2002 15:39:58 +0100 (MET) Received: from hbg001soh.diamond.philips.com (e1soh01.diamond.philips.com [130.143.165.212]) by smtprelay-nl1.philips.com (8.9.3/8.8.5-1.2.2m-19990317) with ESMTP id OAA07960; Fri, 1 Mar 2002 14:39:57 GMT To: Navamuel Castillo Juan Jose Subject: [linux-dvb] Re: Installing dvb card ??? Cc: Date: Fri, 1 Mar 2002 14:39:53 +0000 Message-ID: X-MIMETrack: Serialize by Router on hbg001soh/H/SERVER/PHILIPS(Release 5.0.5 |September 22, 2000) at 01/03/2002 15:58:49, Serialize complete at 01/03/2002 15:58:49 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: immo.benjes@philips.com Precedence: bulk X-list: linux-dvb Hi, This is not a problem that GTK isn't installed. All the error messages you get come form autoconf. Autoconf uses M4 macros the search for all the stuff. Immo On Friday 01 Mar 2002 2:01 pm, Navamuel Castillo Juan Jose wrote: > Thank you, Thomas. > I have look at my directories and I have found something similar to gtk.m4 > it is gtkgl.m4 and it includes code related to 'AM_PATH_GTK' but I don't > understand it: > > # AM_PATH_GTKGL([ACTION-IF-FOUND [,ACTION-IF-NOT-FOUND]]) > AC_DEFUN(AM_PATH_GTKGL, > [ > AC_REQUIRE([AM_PATH_GTK]) > AC_PROVIDE([AM_PATH_GTKGL]) > > Should I install anyway the gtk-devel package? > > Thank you > Juanjo Navamuel > > Thomas Schmitt wrote: > > > 4.- ind DVB/apps/tuxzap > ./autogen.sh > > > > > > here the problems came! > > > > > > > > > > > > dvb1:~/DVB/apps/tuxzap # ./autogen.sh > > > **Warning**: I am going to run `configure' with no arguments. > > > If you wish to pass any to it, please specify them on the > > > `./autogen.sh' command line. > > > > > > processing . > > > Running aclocal ... > > > aclocal: configure.in: 99: macro `AM_PATH_GTK' not found in > > > library Running autoheader... > > > autoheader: error: AC_CONFIG_HEADERS not found in configure.in > > > Running automake --gnu ... > > > automake: configure.in: installing `./install-sh' > > > automake: configure.in: installing `./mkinstalldirs' > > > automake: configure.in: installing `./missing' > > > automake: configure.in: installing `./config.guess' > > > automake: configure.in: installing `./config.sub' > > > configure.in: 14: required file `./config.h.in' not found > > > Running autoconf ... > > > configure.in:12: error: possibly undefined macro: > > > AM_INIT_AUTOMAKE configure.in:14: error: possibly undefined macro: > > > AM_CONFIG_HEADER configure.in:17: error: possibly undefined macro: > > > AM_MAINTAINER_MODE configure.in:25: error: possibly undefined macro: > > > AM_PROG_CC_STDC configure.in:99: error: possibly undefined macro: > > > AM_PATH_GTK Running ./configure ... > > > ./configure: line 959: syntax error near unexpected token > > > `AM_INIT_AUTOMAKE($PACKAGE,' > > > > > > ./configure: line 959: `AM_INIT_AUTOMAKE($PACKAGE, $VERSION)' > > > dvb1:~/DVB/apps/tuxzap # > > > > > > > > > What are those "AM_PATH_GTK", "AC_CONFIG_HEADERS" and so on? > > > > > > I have tried to remove the directory and make the instalation again, > > > but I think I should make something more with the > > > modules. > > > How can I remove everything completely to start again? > > > > It seems that the gtk-devel package is not installed. > > > > Regards > > Thomas Schmitt > > > > --- > > > > "Mr. Ghandi, what do you think about western civilization?" > > "Oh, that would be a good idea." -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Mar 01 15:33:35 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 5316 invoked by uid 0); 1 Mar 2002 15:33:35 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 1 Mar 2002 15:33:35 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gp1N-00020o-00; Fri, 01 Mar 2002 16:32:33 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 01 Mar 2002 16:31:34 +0100 (CET) Received: from mailout02.sul.t-online.com ([194.25.134.17]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gp0Q-0001nZ-00 for ; Fri, 01 Mar 2002 16:31:34 +0100 Received: from fwd06.sul.t-online.de by mailout02.sul.t-online.com with smtp id 16gp0P-0001bI-01; Fri, 01 Mar 2002 16:31:33 +0100 Received: from diadem.milky.way (04335931990-0001@[217.1.36.45]) by fwd06.sul.t-online.com with esmtp id 16gp08-2GqtCSC; Fri, 1 Mar 2002 16:31:16 +0100 Received: from localhost (crest@localhost) by diadem.milky.way (8.9.3/8.9.3) with ESMTP id QAA02346 for ; Fri, 1 Mar 2002 16:28:22 +0100 Date: Fri, 1 Mar 2002 16:28:22 +0100 (CET) From: rolf.siebrecht@t-online.de (Rolf Siebrecht) To: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: DVB for internet In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-Sender: 04335931990-0001@t-dialin.net X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: rolf.siebrecht@t-online.de Precedence: bulk X-list: linux-dvb Hi! On Fri, 1 Mar 2002, Andrew Edunov wrote: > After installation modules and network activation I try to set up card on > concrete transponder with 'tuxzap' program. > Do 'set' and program give me response: > ********************************** > set_vpid: Device or resource busy > set_apid: Device or resource busy > ********************************** > > What does it mean !!! Set the needed transponder first, and then start your network applications. Bye, Rolf -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Mar 01 15:36:25 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 5366 invoked by uid 0); 1 Mar 2002 15:36:25 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 1 Mar 2002 15:36:25 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gp45-0002M4-00; Fri, 01 Mar 2002 16:35:21 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 01 Mar 2002 16:34:58 +0100 (CET) Received: from mailout10.sul.t-online.com ([194.25.134.21]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gp3i-0002Fr-00 for ; Fri, 01 Mar 2002 16:34:58 +0100 Received: from fwd04.sul.t-online.de by mailout10.sul.t-online.com with smtp id 16gnh3-0001f9-02; Fri, 01 Mar 2002 15:07:29 +0100 Received: from schmitt.schmitt.mine.nu (320079924130-0001@[80.131.14.3]) by fmrl04.sul.t-online.com with esmtp id 16gngt-0uMCSuC; Fri, 1 Mar 2002 15:07:19 +0100 Received: from hiro (hiro.schmitt.mine.nu [192.168.1.2]) by schmitt.schmitt.mine.nu (8.11.6/8.11.6/SuSE Linux 0.5) with ESMTP id g21E67m14047; Fri, 1 Mar 2002 15:06:07 +0100 Date: Fri, 01 Mar 2002 15:05:06 +0100 From: Thomas Schmitt Reply-To: Thomas Schmitt To: jjonc@eikon.tum.de cc: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: Installing dvb card ??? Message-ID: <2170000.1014991506@hiro> In-Reply-To: <3C7F89C3.3AD719CF@wanadoo.es> References: <3C7F8260.4C157EDE@wanadoo.es> <3280000.1014989976@hiro> <3C7F89C3.3AD719CF@wanadoo.es> X-Mailer: Mulberry/2.1.2 (Linux/x86) MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1; format=flowed Content-Transfer-Encoding: quoted-printable Content-Disposition: inline X-Virus-Scanned: by AMaViS-perl11-milter (http://amavis.org/) X-Sender: 320079924130-0001@t-dialin.net X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: lists@schmitt.mine.nu Precedence: bulk X-list: linux-dvb --On Freitag, M=E4rz 01, 2002 15:01:39 +0100 Navamuel Castillo Juan Jose=20 wrote: > Thank you, Thomas. > I have look at my directories and I have found something similar to > gtk.m4 it is gtkgl.m4 and it includes code related to 'AM_PATH_GTK' but I > don't understand it: > > # AM_PATH_GTKGL([ACTION-IF-FOUND [,ACTION-IF-NOT-FOUND]]) > AC_DEFUN(AM_PATH_GTKGL, > [ > AC_REQUIRE([AM_PATH_GTK]) > AC_PROVIDE([AM_PATH_GTKGL]) > > Should I install anyway the gtk-devel package? All I know is that it is required to compile tuxzap. Check if its already=20 installed. -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Mar 01 15:40:32 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 5676 invoked by uid 0); 1 Mar 2002 15:40:32 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 1 Mar 2002 15:40:32 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gp84-0002lm-00; Fri, 01 Mar 2002 16:39:28 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 01 Mar 2002 16:39:03 +0100 (CET) Received: from mailout07.sul.t-online.com ([194.25.134.83]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gp7f-0002f2-00 for ; Fri, 01 Mar 2002 16:39:03 +0100 Received: from fwd06.sul.t-online.de by mailout07.sul.t-online.com with smtp id 16gp0P-0007Ft-0A; Fri, 01 Mar 2002 16:31:33 +0100 Received: from diadem.milky.way (04335931990-0001@[217.1.36.45]) by fwd06.sul.t-online.com with esmtp id 16gp09-2GqtCTC; Fri, 1 Mar 2002 16:31:17 +0100 Received: from localhost (crest@localhost) by diadem.milky.way (8.9.3/8.9.3) with ESMTP id QAA02344 for ; Fri, 1 Mar 2002 16:25:56 +0100 Date: Fri, 1 Mar 2002 16:25:56 +0100 (CET) From: rolf.siebrecht@t-online.de (Rolf Siebrecht) To: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: Installing dvb card ??? In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-Sender: 04335931990-0001@t-dialin.net X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: rolf.siebrecht@t-online.de Precedence: bulk X-list: linux-dvb Hi! On Fri, 1 Mar 2002 immo.benjes@philips.com wrote: > This is not a problem that GTK isn't installed. > All the error messages you get come form autoconf. Autoconf uses M4 macros > the search for all the stuff. It *is* caused by the missing gtk-devel package. Look at the list archive, we've had this problem hundreds of times. And look at apps/tuxzap/README. Bye, Rolf > > I have look at my directories and I have found something similar to gtk.m4 > > it is gtkgl.m4 and it includes code related to 'AM_PATH_GTK' but I don't > > understand it: > > > > # AM_PATH_GTKGL([ACTION-IF-FOUND [,ACTION-IF-NOT-FOUND]]) > > AC_DEFUN(AM_PATH_GTKGL, > > [ > > AC_REQUIRE([AM_PATH_GTK]) > > AC_PROVIDE([AM_PATH_GTKGL]) > > > > Should I install anyway the gtk-devel package? -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Mar 01 16:34:58 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 24760 invoked by uid 0); 1 Mar 2002 16:34:58 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 1 Mar 2002 16:34:58 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gpyv-0007bY-00; Fri, 01 Mar 2002 17:34:05 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 01 Mar 2002 17:31:11 +0100 (CET) Received: from aperol.lkn.e-technik.tu-muenchen.de ([129.187.222.163] helo=lkn.e-technik.tu-muenchen.de ident=root) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gpw7-0007IW-00 for ; Fri, 01 Mar 2002 17:31:11 +0100 Received: from wanadoo.es (sun [10.152.4.16]) by lkn.e-technik.tu-muenchen.de (8.11.3/8.11.3/SuSE Linux 8.11.1-0.5) with ESMTP id g21GUXE10365 for ; Fri, 1 Mar 2002 17:30:33 +0100 Sender: navamuel@lkn.ei.tum.de Message-ID: <3C7FACCE.5AE4C2CB@wanadoo.es> Date: Fri, 01 Mar 2002 17:31:10 +0100 From: Navamuel Castillo Juan Jose Reply-To: jjonc@eikon.tum.de X-Mailer: Mozilla 4.76 [en] (X11; U; SunOS 5.8 sun4u) X-Accept-Language: en MIME-Version: 1.0 To: linux-dvb@linuxtv.org Subject: [linux-dvb] Re: Installing dvb card ??? References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: jjonavamuel@wanadoo.es Precedence: bulk X-list: linux-dvb Thank you to everyone! It's not yet solved but... anyway is friday! Gleichfalls, Immo Ciao Juanjo Navamuel immo.benjes@philips.com wrote: > Hi, > > www.gnu.org, have a look for autoconf. Download autoconf 2.13 (the next > version after 2.13 was 2.50 do not know why), compile and install it. > > Should be easy to compile. > > The other way (which I haven't tried yet) is to find out how this conversion > tool for autoconf is called (have a look in documentation of autoconf at > gnu) > > Schoenes Wochenende > > Immo > > On Friday 01 Mar 2002 3:38 pm, you wrote: > > How can i change the versions? > > > > immo.benjes@philips.com wrote: > > > On Friday 01 Mar 2002 2:54 pm, you wrote: > > > > Thanks Immo! > > > > I have checked versions: > > > > > > > > autoconf (GNU Autoconf) 2.52 > > > > > > That is the problem. Try using autoconf 2.13 > > > > > > Immo > > > > > > > automake (GNU automake) 1.4-p5 > > > > > > > > so I should have no problems, according to your first mail? > > > > > > > > Thanks, > > > > Juanjo > > > > > > > > immo.benjes@philips.com wrote: > > > > > Hi, > > > > > > > > > > This is not a problem that GTK isn't installed. > > > > > All the error messages you get come form autoconf. Autoconf uses M4 > > > > > macros the search for all the stuff. > > > > > > > > > > Immo > > > > > > > > > > On Friday 01 Mar 2002 2:01 pm, Navamuel Castillo Juan Jose wrote: > > > > > > Thank you, Thomas. > > > > > > I have look at my directories and I have found something similar to > > > > > > gtk.m4 it is gtkgl.m4 and it includes code related to 'AM_PATH_GTK' > > > > > > but I don't understand it: > > > > > > > > > > > > # AM_PATH_GTKGL([ACTION-IF-FOUND [,ACTION-IF-NOT-FOUND]]) > > > > > > AC_DEFUN(AM_PATH_GTKGL, > > > > > > [ > > > > > > AC_REQUIRE([AM_PATH_GTK]) > > > > > > AC_PROVIDE([AM_PATH_GTKGL]) > > > > > > > > > > > > Should I install anyway the gtk-devel package? > > > > > > > > > > > > Thank you > > > > > > Juanjo Navamuel > > > > > > > > > > > > Thomas Schmitt wrote: > > > > > > > > 4.- ind DVB/apps/tuxzap > ./autogen.sh > > > > > > > > > > > > > > > > here the problems came! > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > dvb1:~/DVB/apps/tuxzap # ./autogen.sh > > > > > > > > **Warning**: I am going to run `configure' with no > > > > > > > > arguments. If you wish to pass any to it, please specify them > > > > > > > > on the `./autogen.sh' command line. > > > > > > > > > > > > > > > > processing . > > > > > > > > Running aclocal ... > > > > > > > > aclocal: configure.in: 99: macro `AM_PATH_GTK' not found > > > > > > > > in library Running autoheader... > > > > > > > > autoheader: error: AC_CONFIG_HEADERS not found in > > > > > > > > configure.in Running automake --gnu ... > > > > > > > > automake: configure.in: installing `./install-sh' > > > > > > > > automake: configure.in: installing `./mkinstalldirs' > > > > > > > > automake: configure.in: installing `./missing' > > > > > > > > automake: configure.in: installing `./config.guess' > > > > > > > > automake: configure.in: installing `./config.sub' > > > > > > > > configure.in: 14: required file `./config.h.in' not found > > > > > > > > Running autoconf ... > > > > > > > > configure.in:12: error: possibly undefined macro: > > > > > > > > AM_INIT_AUTOMAKE configure.in:14: error: possibly undefined > > > > > > > > macro: AM_CONFIG_HEADER configure.in:17: error: possibly > > > > > > > > undefined macro: AM_MAINTAINER_MODE configure.in:25: error: > > > > > > > > possibly undefined macro: AM_PROG_CC_STDC configure.in:99: > > > > > > > > error: possibly undefined macro: AM_PATH_GTK Running > > > > > > > > ./configure ... > > > > > > > > ./configure: line 959: syntax error near unexpected token > > > > > > > > `AM_INIT_AUTOMAKE($PACKAGE,' > > > > > > > > > > > > > > > > ./configure: line 959: `AM_INIT_AUTOMAKE($PACKAGE, > > > > > > > > $VERSION)' dvb1:~/DVB/apps/tuxzap # > > > > > > > > > > > > > > > > > > > > > > > > What are those "AM_PATH_GTK", "AC_CONFIG_HEADERS" and so on? > > > > > > > > > > > > > > > > I have tried to remove the directory and make the instalation > > > > > > > > again, but I think I should make something more with the > > > > > > > > modules. > > > > > > > > How can I remove everything completely to start again? > > > > > > > > > > > > > > It seems that the gtk-devel package is not installed. > > > > > > > > > > > > > > Regards > > > > > > > Thomas Schmitt > > > > > > > > > > > > > > --- > > > > > > > > > > > > > > "Mr. Ghandi, what do you think about western civilization?" > > > > > > > "Oh, that would be a good idea." > > > > > > -- > > > Dr.-Ing. Immo Benjes > > > Senior Scientist > > > ______________________________________________________________________ > > > Philips Research Laboratories > > > Cross Oak Lane > > > Redhill, RH1 5HA > > > +44 (0)1293 81 5737 > > -- > Dr.-Ing. Immo Benjes > Senior Scientist > ______________________________________________________________________ > Philips Research Laboratories > Cross Oak Lane > Redhill, RH1 5HA > +44 (0)1293 81 5737 -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Mar 01 16:51:15 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 29733 invoked by uid 0); 1 Mar 2002 16:51:14 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 1 Mar 2002 16:51:14 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gqET-0008Td-00; Fri, 01 Mar 2002 17:50:09 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 01 Mar 2002 17:49:28 +0100 (CET) Received: from michelle.crs4.it ([156.148.1.33] helo=mail.crs4.it) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gqDn-0008JU-00 for ; Fri, 01 Mar 2002 17:49:27 +0100 Received: from campidano (campidano.crs4.it [156.148.2.22]) by mail.crs4.it (Postfix) with SMTP id 21B4B10DB for ; Fri, 1 Mar 2002 18:02:38 +0100 (MET) Message-ID: <011301c1c141$f3fddc20$1602949c@campidano> From: "Felice Colucci" To: References: Subject: [linux-dvb] problem make insmod Date: Fri, 1 Mar 2002 17:55:55 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="koi8-r" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: felice@crs4.it Precedence: bulk X-list: linux-dvb Hi All I have a problem with my DVB-s card: when I type make all right ;when i type make insmod this is the message make[1]: Entering directory `/root/DVB/driver' DIR=`pwd`; (cd /usr/src/linux; make SUBDIRS=$DIR modules) make[2]: Entering directory `/usr/src/linux' make -C /root/DVB/driver CFLAGS="-D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -W no-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-bound ary=2 -march=i686 -DMODULE -DMODVERSIONS -include /usr/src/linux/include/linux/modversions.h" MAKING _MODULES=1 modules make[3]: Entering directory `/root/DVB/driver' make[3]: Nothing to be done for `modules'. make[3]: Leaving directory `/root/DVB/driver' make[2]: Leaving directory `/usr/src/linux' make[1]: Leaving directory `/root/DVB/driver' ( \ insmod dvbdev.o; \ insmod dvb_net.o; \ insmod i2c-core; \ insmod videodev; \ insmod dvb_filter.o; \ insmod dmxdev.o; \ insmod VES1893.o; \ insmod VES1820.o; \ insmod L64781.o; \ insmod SP8870.o debug=1; \ insmod tda8083.o; \ insmod stv0299.o; \ insmod tuner.o; \ insmod saa7146_core.o mode=0; \ insmod saa7146_v4l.o; \ insmod dvb_demux.o; \ insmod dvb_frontend.o; \ insmod dvb.o init_chan=2 pids_off=0; \ ) insmod: a module named dvbdev already exists insmod: a module named dvb_net already exists insmod: i2c-core: no module by that name found insmod: videodev: no module by that name found insmod: a module named dvb_filter already exists insmod: a module named dmxdev already exists VES1893.o: unresolved symbol i2c_transfer_Rsmp_a2a7e455 VES1893.o: unresolved symbol i2c_add_driver_Rsmp_6d7c1838 VES1893.o: unresolved symbol i2c_detach_client_Rsmp_6f8b23f6 VES1893.o: unresolved symbol i2c_master_send_Rsmp_06fe6d88 VES1893.o: unresolved symbol i2c_del_driver_Rsmp_11a76106 VES1893.o: unresolved symbol i2c_attach_client_Rsmp_0e8734a0 VES1820.o: unresolved symbol i2c_transfer_Rsmp_a2a7e455 VES1820.o: unresolved symbol i2c_add_driver_Rsmp_6d7c1838 VES1820.o: unresolved symbol i2c_detach_client_Rsmp_6f8b23f6 VES1820.o: unresolved symbol i2c_master_send_Rsmp_06fe6d88 VES1820.o: unresolved symbol i2c_del_driver_Rsmp_11a76106 VES1820.o: unresolved symbol i2c_attach_client_Rsmp_0e8734a0 L64781.o: unresolved symbol i2c_transfer_Rsmp_a2a7e455 L64781.o: unresolved symbol i2c_add_driver_Rsmp_6d7c1838 L64781.o: unresolved symbol i2c_detach_client_Rsmp_6f8b23f6 L64781.o: unresolved symbol i2c_master_send_Rsmp_06fe6d88 L64781.o: unresolved symbol i2c_del_driver_Rsmp_11a76106 L64781.o: unresolved symbol i2c_attach_client_Rsmp_0e8734a0 SP8870.o: unresolved symbol i2c_transfer_Rsmp_a2a7e455 SP8870.o: unresolved symbol i2c_add_driver_Rsmp_6d7c1838 SP8870.o: unresolved symbol i2c_detach_client_Rsmp_6f8b23f6 SP8870.o: unresolved symbol i2c_master_send_Rsmp_06fe6d88 SP8870.o: unresolved symbol i2c_del_driver_Rsmp_11a76106 SP8870.o: unresolved symbol i2c_attach_client_Rsmp_0e8734a0 tda8083.o: unresolved symbol i2c_transfer_Rsmp_a2a7e455 tda8083.o: unresolved symbol i2c_add_driver_Rsmp_6d7c1838 tda8083.o: unresolved symbol i2c_detach_client_Rsmp_6f8b23f6 tda8083.o: unresolved symbol i2c_master_send_Rsmp_06fe6d88 tda8083.o: unresolved symbol i2c_del_driver_Rsmp_11a76106 tda8083.o: unresolved symbol i2c_attach_client_Rsmp_0e8734a0 stv0299.o: unresolved symbol i2c_transfer_Rsmp_a2a7e455 stv0299.o: unresolved symbol i2c_add_driver_Rsmp_6d7c1838 stv0299.o: unresolved symbol i2c_detach_client_Rsmp_6f8b23f6 stv0299.o: unresolved symbol i2c_master_send_Rsmp_06fe6d88 stv0299.o: unresolved symbol i2c_del_driver_Rsmp_11a76106 stv0299.o: unresolved symbol i2c_attach_client_Rsmp_0e8734a0 tuner.o: unresolved symbol i2c_master_recv_Rsmp_709ba864 tuner.o: unresolved symbol i2c_add_driver_Rsmp_6d7c1838 tuner.o: unresolved symbol i2c_detach_client_Rsmp_6f8b23f6 tuner.o: unresolved symbol i2c_master_send_Rsmp_06fe6d88 tuner.o: unresolved symbol i2c_probe_Rsmp_084b5829 tuner.o: unresolved symbol i2c_del_driver_Rsmp_11a76106 tuner.o: unresolved symbol i2c_attach_client_Rsmp_0e8734a0 tuner.o: Hint: You are trying to load a module without a GPL compatible license and it has unresolved symbols. Contact the module supplier for assistance, only they can help you. saa7146_core.o: unresolved symbol i2c_add_adapter_Rsmp_33b75073 saa7146_core.o: unresolved symbol i2c_del_adapter_Rsmp_5babfe4d saa7146_core.o: Hint: You are trying to load a module without a GPL compatible license and it has unresolved symbols. Contact the module supplier for assistance, only they can help you. saa7146_v4l.o: unresolved symbol saa7146_del_extension saa7146_v4l.o: unresolved symbol saa7146_add_extension saa7146_v4l.o: Hint: You are trying to load a module without a GPL compatible license and it has unresolved symbols. Contact the module supplier for assistance, only they can help you. insmod: a module named dvb_demux already exists dvb_frontend.o: unresolved symbol i2c_transfer_Rsmp_a2a7e455 dvb.o: unresolved symbol i2c_transfer_Rsmp_a2a7e455 dvb.o: unresolved symbol video_unregister_device_Rsmp_a7e8a1f0 dvb.o: unresolved symbol dvb_frontend_poll dvb.o: unresolved symbol dvb_frontend_get_event dvb.o: unresolved symbol dvb_frontend_stop dvb.o: unresolved symbol saa7146_del_extension dvb.o: unresolved symbol saa7146_get_handle dvb.o: unresolved symbol video_register_device_Rsmp_5cb0713c dvb.o: unresolved symbol dvb_frontend_init dvb.o: unresolved symbol saa7146_add_extension dvb.o: unresolved symbol dvb_frontend_demod_command dvb.o: unresolved symbol dvb_frontend_exit dvb.o: unresolved symbol dvb_frontend_tune make: *** [insmod] Error 1 I think the problem is in bt.o Help me please, thans -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Mar 01 17:13:18 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 2521 invoked by uid 0); 1 Mar 2002 17:13:17 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 1 Mar 2002 17:13:17 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gqa4-00029L-00; Fri, 01 Mar 2002 18:12:28 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 01 Mar 2002 18:09:25 +0100 (CET) Received: from mailout01.sul.t-online.com ([194.25.134.80]) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gqX7-0001qb-00 for ; Fri, 01 Mar 2002 18:09:25 +0100 Received: from fwd01.sul.t-online.de by mailout01.sul.t-online.com with smtp id 16gqR2-00083b-0F; Fri, 01 Mar 2002 18:03:08 +0100 Received: from laden (0619236969-0001@[217.233.212.206]) by fwd01.sul.t-online.com with smtp id 16gqQj-0MTsuWC; Fri, 1 Mar 2002 18:02:49 +0100 Message-ID: <004b01c1c142$f8f2d270$0101a8c0@laden> From: a.share@t-online.de (Andreas Share) To: "Felice Colucci" Cc: References: <011301c1c141$f3fddc20$1602949c@campidano> Subject: [linux-dvb] [linux-dvb]Re: problem make insmod Date: Fri, 1 Mar 2002 18:03:12 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="koi8-r" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 X-Sender: 0619236969-0001@t-dialin.net X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: a.share@t-online.de Precedence: bulk X-list: linux-dvb > Hi All > I have a problem with my DVB-s card: > when I type make all right ;when i type make insmod this is the message > > make[1]: Entering directory `/root/DVB/driver' > DIR=`pwd`; (cd /usr/src/linux; make SUBDIRS=$DIR modules) > make[2]: Entering directory `/usr/src/linux' > make -C /root/DVB/driver > CFLAGS="-D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -W > no-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -pipe > -mpreferred-stack-bound > ary=2 -march=i686 -DMODULE -DMODVERSIONS -include > /usr/src/linux/include/linux/modversions.h" MAKING > _MODULES=1 modules > make[3]: Entering directory `/root/DVB/driver' > make[3]: Nothing to be done for `modules'. > make[3]: Leaving directory `/root/DVB/driver' > make[2]: Leaving directory `/usr/src/linux' > > make[1]: Leaving directory `/root/DVB/driver' > ( \ > insmod dvbdev.o; \ > insmod dvb_net.o; \ > insmod i2c-core; \ > insmod videodev; \ > insmod dvb_filter.o; \ > insmod dmxdev.o; \ > insmod VES1893.o; \ > insmod VES1820.o; \ > insmod L64781.o; \ > insmod SP8870.o debug=1; \ > insmod tda8083.o; \ > insmod stv0299.o; \ > insmod tuner.o; \ > insmod saa7146_core.o mode=0; \ > insmod saa7146_v4l.o; \ > insmod dvb_demux.o; \ > insmod dvb_frontend.o; \ > insmod dvb.o init_chan=2 pids_off=0; \ > ) > insmod: a module named dvbdev already exists > insmod: a module named dvb_net already exists > insmod: i2c-core: no module by that name found > insmod: videodev: no module by that name found > insmod: a module named dvb_filter already exists > insmod: a module named dmxdev already exists Here is the problem...the driver could not find i2c-core.o and videodev.o. Both should be compilied with your kernal (2.4.x only!). Take a look at if this modules exists unter /lib/modules/2.4.x/kernel/..... Greetings A.Share -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From linux-dvb-bounce@linuxtv.org Fri Mar 01 17:37:15 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 12177 invoked by uid 0); 1 Mar 2002 17:37:15 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 1 Mar 2002 17:37:15 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gqxB-0004dF-00; Fri, 01 Mar 2002 18:36:21 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 01 Mar 2002 18:32:52 +0100 (CET) Received: from natpost.webmailer.de ([192.67.198.65] helo=post.webmailer.de) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gqtn-0004EE-00 for ; Fri, 01 Mar 2002 18:32:51 +0100 Received: from renne (pD954BEFB.dip.t-dialin.net [217.84.190.251]) by post.webmailer.de (8.9.3/8.8.7) with ESMTP id SAA05801 for ; Fri, 1 Mar 2002 18:32:51 +0100 (MET) Message-ID: <003e01c1c147$0b5a4a70$0202020a@local.wg> From: =?iso-8859-1?Q?Ren=E9_Bartsch?= To: Subject: [linux-dvb] Ideas for DVBVideoLan / Question to Convergence developers Date: Fri, 1 Mar 2002 18:30:49 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: rene@bartschnet.de Precedence: bulk X-list: linux-dvb Hi, I've thought about where to connect to the Convergence-driver with DVBVideoLan. The simpliest way would be to grab the complete PS/PES-stream sent to the hardware decoder, buffer it for avoiding underruns or breaks and to send it by RTP. As for the complete demuxing is done by the player, there won't be any (de-)muxing or A/V-syncing problems for server and network. That interface shouldn't directly be hardware-related but in a upper level of the driver to create a decoder-dummy (so, that e.g. VDR can send it's PS/PES-stream to a imaginary MPEG-decoder-dummy which simply reroutes to the RTP-stack when using a low-budget card). Maybe we'll find a way to mux-in OSD-function in the future. Another possibilty should be to RTP PIDs (Internet, DataServices, ...) So we should consider that for the interface. An additional function-call patched into the Convergence-driver could look like this: "rtpstream( serverIP( ), serverPORT( ), streaming( ), interface( ) )" where "serverIP" is the IP of the network interface (multicast- or single client address) and "serverPORT" for the port. Streaming hands over additional options. This could be e.g. "off" or "false" to stop streaming or options to start streaming. "video" could be used to simply stream the PES/PS-stream sent to the decoder and given PIDs like "512 384 67 3052" could define to send that PIDs of the just received DVB-stream by RTP. Last, but maybe not least interface( 1 2 4 ...) could define which DVB-cards to be used. Tuning and all other stuff would be done by the standard function-calls in the Convergence-driver. So, the existing software stays compatible. And now the big question to Convergence: Which function-calls/APIs in which files of the Convergence-driver would please Mr. Winkler? (as for I'm a very poor programmer I'll limit myself on doing research - except you want some bluescreens on UNIX ;o) ) Rene -- Info: To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject. From vdr-bounce@linuxtv.org Fri Mar 01 18:54:57 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 4123 invoked by uid 0); 1 Mar 2002 18:54:57 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 1 Mar 2002 18:54:57 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gsAV-0001VY-00; Fri, 01 Mar 2002 19:54:11 +0100 Received: with LISTAR (v0.129a; list vdr); Fri, 01 Mar 2002 19:53:54 +0100 (CET) Received: from natwar.webmailer.de ([192.67.198.70] helo=post.webmailer.de) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gsAD-0001RF-00; Fri, 01 Mar 2002 19:53:54 +0100 Received: from renne (pD954BEFB.dip.t-dialin.net [217.84.190.251]) by post.webmailer.de (8.9.3/8.8.7) with ESMTP id TAA11681; Fri, 1 Mar 2002 19:53:21 +0100 (MET) Message-ID: <00a701c1c152$4bb8dd10$0202020a@local.wg> From: =?iso-8859-1?Q?Ren=E9_Bartsch?= To: , References: <003701c1c146$8456b130$0202020a@local.wg> Subject: [vdr] Re: Ideas for DVBVideoLan / Question to Convergence developers Date: Fri, 1 Mar 2002 19:52:53 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Content-Transfer-Encoding: quoted-printable X-MIME-Autoconverted: from 8bit to quoted-printable by post.webmailer.de id TAA11681 X-listar-version: Listar v0.129a Sender: vdr-bounce@linuxtv.org Errors-to: vdr-bounce@linuxtv.org X-original-sender: rene@bartschnet.de Precedence: bulk Reply-to: vdr@linuxtv.org X-list: vdr ----- Original Message ----- From: "Ren=E9 Bartsch" To: Sent: Friday, March 01, 2002 6:28 PM Subject: [vdr] Ideas for DVBVideoLan / Question to Convergence developers > > Hi, > > I've thought about where to connect to the Convergence-driver with DVBV= ideoLan. > > The simpliest way would be to grab the complete PS/PES-stream sent to t= he hardware decoder, > buffer it for avoiding underruns or breaks and to send it by RTP. > > As for the complete demuxing is done by the player, there won't be any = (de-)muxing or > A/V-syncing problems for server and network. > > That interface shouldn't directly be hardware-related but in a upper le= vel of the driver to create > a decoder-dummy (so, that e.g. VDR can send it's PS/PES-stream to a ima= ginary MPEG-decoder-dummy > which simply reroutes to the RTP-stack when using a low-budget card). We should generally use hw-decoder-dummies. (e.g. if you habe DVB-S 1, 2,= 3 you can define dummies on 4, 5, 6 ...) So something could be played back without using a DVB-S (keeping it free = for recording ...) > > Maybe we'll find a way to mux-in OSD-function in the future. Could be done by generating a MPEG2-stream with OSD-data on a additionall= y PID ... (second window on sw-player) >Another possibilty should be to RTP PIDs (Internet, DataServices, ...) > So we should consider that for the interface. > > An additional function-call patched into the Convergence-driver could l= ook like this: > > "rtpstream( serverIP( ), serverPORT( ), streaming( ), interface( ) )" > > where "serverIP" is the IP of the network interface (multicast- or sing= le client address) > and "serverPORT" for the port. Streaming hands over additional options. > > This could be e.g. "off" or "false" to stop streaming or options to sta= rt streaming. > "video" could be used to simply stream the PES/PS-stream sent to the de= coder > and given PIDs like "512 384 67 3052" could define to send that PIDs of= the just > received DVB-stream by RTP. > > Last, but maybe not least interface( 1 2 4 ...) could define which DVB-= cards to be used. > > Tuning and all other stuff would be done by the standard function-calls= in the Convergence-driver. > So, the existing software stays compatible. > > And now the big question to Convergence: > > Which function-calls/APIs in which files of the Convergence-driver woul= d please Mr. Winkler? > > (as for I'm a very poor programmer I'll limit myself on doing research = - except you want some bluescreens on UNIX? ;o) ) > > > Rene > > > From linux-dvb-bounce@linuxtv.org Fri Mar 01 18:56:34 2002 Return-Path: Delivered-To: mhonarc@limes.convergence.de Received: (qmail 4423 invoked by uid 0); 1 Mar 2002 18:56:34 -0000 Received: from chambertin.convergence.de (212.84.236.2) by limes.convergence.de with SMTP; 1 Mar 2002 18:56:34 -0000 Received: from localhost ([127.0.0.1] helo=chambertin) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gsC1-0001lp-00; Fri, 01 Mar 2002 19:55:45 +0100 Received: with LISTAR (v0.129a; list linux-dvb); Fri, 01 Mar 2002 19:54:12 +0100 (CET) Received: from natwar.webmailer.de ([192.67.198.70] helo=post.webmailer.de) by chambertin.convergence.de with esmtp (Exim 3.33 #2 ) id 16gsAD-0001RF-00; Fri, 01 Mar 2002 19:53:54 +0100 Received: from renne (pD954BEFB.dip.t-dialin.net [217.84.190.251]) by post.webmailer.de (8.9.3/8.8.7) with ESMTP id TAA11681; Fri, 1 Mar 2002 19:53:21 +0100 (MET) Message-ID: <00a701c1c152$4bb8dd10$0202020a@local.wg> From: =?iso-8859-1?Q?Ren=E9_Bartsch?= To: , References: <003701c1c146$8456b130$0202020a@local.wg> Subject: [linux-dvb] Re: [vdr] Ideas for DVBVideoLan / Question to Convergence developers Date: Fri, 1 Mar 2002 19:52:53 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Content-Transfer-Encoding: quoted-printable X-MIME-Autoconverted: from 8bit to quoted-printable by post.webmailer.de id TAA11681 X-listar-version: Listar v0.129a Sender: linux-dvb-bounce@linuxtv.org Errors-to: linux-dvb-bounce@linuxtv.org X-original-sender: rene@bartschnet.de Precedence: bulk X-list: linux-dvb ----- Original Message ----- From: "Ren=E9 Bartsch" To: Sent: Friday, March 01, 2002 6:28 PM Subject: [vdr] Ideas for DVBVideoLan / Question to Convergence developers > > Hi, > > I've thought about where to connect to the Convergence-driver with DVBV= ideoLan. > > The simpliest way would be to grab the complete PS/PES-stream sent to t= he hardware decoder, > buffer it for avoiding underruns or breaks and to send it by RTP. > > As for the complete demuxing is done by the player, there won't be any = (de-)muxing or > A/V-syncing problems for server and network. > > That interface shouldn't directly be hardware-related but in a upper le= vel of the driver to create > a decoder-dummy (so, that e.g. VDR can send it's PS/PES-stream to a ima= ginary MPEG-decoder-dummy > which simply reroutes to the RTP-stack when using a low-budget card). We should generally use hw-decoder-dummies. (e.g. if you habe DVB-S 1, 2,= 3 you can define dummies on 4, 5, 6 ...) So something could be played back without using a DVB-S (keeping it free = for recording ...) > > Maybe we'll find a way to mux-in OSD-function in the future. Could be done by generating a MPEG2-stream with OSD-data on a additionall= y PID ... (second window on sw-player) >Another possibilty should be to RTP PIDs (Internet, DataServices, ...) > So we should consider that for