[mpeg2] some more details (no init for kfir on 2.4.0)

[Paul Holcomb <mpeg2@blue.cpoint.net>]

 more info:

 I looked at a couple of other factors.  

- First, I tried the card in a Windows 98 box just to make sure it
  worked; it did, the driver loaded without trouble and the
  application visiontech provides for 98 loaded and recognized the
  card.  It could even tell whether a signal was hooked up or not.  I
  didn't try anything more with it.

- Next, I noticed that on the Linux machine I was using, sometimes
  when it booted, the onboard USB controller was taking the same IRQ as
  the Kfir card.  I'm not loading a driver for the USB, but just in
  case, I turned off the onboard USB and pulled all the other cards,
  only leaving in network, video, and the Kfir card.  On this next
  boot, both lspci -vv, and /proc/interrupts showed that the Kfir had
  an IRQ that no one else was using.

  I tried loading the driver and I got the same resonse: 
"ADSP loading failed!"

- I also tried loading the i2c and videodev modules that were provided
  with the kfir driver just in case they were different than what I
  had in the 2.4.0 tree.  This also produced the same results.

 Anything else I can try?

-- 
Paul Holcomb                               *pholcomb    \@      cpoint  net*
Sr. Network Engineer                       Counterpoint Networking, Inc.