[vdr] Re: AW: Compiling problem

[Uwe Ortner <uwe.ortner@classic-net.de>]

Hello Jochen,

thanks for the link. Now I can compile vdr without errors :-))

As soon as I start vdr (./vdr -v /video) I get
this message:
##############
vdr[1815]: loading /video/channels.conf
vdr[1815]: loading /video/keys-pc.conf
vdr[1815]: can't open '/video/keys-pc.conf'
vdr[1815]: probing /dev/ost/frontend0
vdr[1817]: EIT processing thread started (pid=1817) - master
vdr[1815]: probing /dev/ost/frontend1
vdr[1815]: found 1 video device
vdr[1815]: setting primary DVB to 1
vdr[1815]: SVDRP listening on port 2001
vdr[1815]: learning keys

Seems to be ok - but my TV-Screen turns black

I've copied the channels.conf.cable to /video/channels.conf 
(but not the keys-pc.conf - due to learn my own settings)

My TV is connected via the SCART cable

Is there a flag for using SCART instead of YC?

Regards 
Uwe


Am Son, 2002-01-13 um 12.23 schrieb Jochen Vieten:
> Hi,
> 
> your dvb driver is too old.
> 
> I'm using this one:
> 
> ftp://ftp.cadsoft.de/pub/people/kls/vdr/siemens_dvb-0.9-20011117.tgz
> 
> Daily driver snapshots:
> 
> http://www.linuxdvb.tv/download.html
> 
> Have fun,
> 
> Jochen
> 
> -----Ursprüngliche Nachricht-----
> Von: vdr-bounce@linuxtv.org [mailto:vdr-bounce@linuxtv.org]Im Auftrag
> von Uwe Ortner
> Gesendet: Sonntag, 13. Januar 2002 11:58
> An: VDR
> Betreff: [vdr] Compiling problem
> 
> 
> Hello,
> 
> compiling VDR results in a message:
> ###################################
> g++ -g -O2 -Wall -Woverloaded-virtual -m486 -c -DREMOTE_KBD
> -D_GNU_SOURCE -I../DVB/ost/include config.c
> In file included from config.h:17,
>                  from config.c:10:
> dvbapi.h:107: syntax error before `;'
> make: *** [config.o] Error 1
> 
> I use this packages (SuSE 7.3,2.4.10-4GB):
> ##########################################
> libdvdcss-1.0.0.tar.gz
> libdvdread-0.9.2.tar.gz
> siemens_dvb-0.9.3.tar.gz
> vdr-0.99pre1-mp3-0.31.tar.gz
> 
> My installation steps:
> ######################
> cp /boot/vmlinuz.config /usr/src/linux/.config
> cp /boot/vmlinuz.autoconf.h /usr/src/linux/include/linux/autoconf.h
> cp /boot/vmlinuz.version.h /usr/src/linux/include/linux/version.h
> make oldconfig
> make menuconfig (serial as modul; reiser build in kernel)
> make dep clean bzImage modules modules_install bzlilo
> init 6
> 
> extracting siemens_dvb-0.9.3.tar.gz       to /opt
> extracting vdr-0.99pre1-mp3-0.31.tar.gz   to /opt
> 
> Because I know DVD support can cause some trouble I did not install
> libdvd***
> 
> cd /opt/DVD/driver
> make
> make insmod
> 
> Output from /var/log/messages:
> ##############################
> i2c-core.o: i2c core module
> i2c-core.o: driver VES1893 DVB demodulator registered.
> i2c-core.o: driver VES1820 DVB demodulator registered.
> i2c-core.o: driver L64781 DVB demodulator registered.
> L64781: init done
> i2c-core.o: driver tda8083 DVB demodulator registered.
> i2c-core.o: driver stv0299 DVB demodulator registered.
> i2c-core.o: driver i2c TV tuner driver registered.
> saa7146_core.o: saa7146(1): bus:0, rev:1, mem:0xd0911e00.
> VES1820: attaching VES1820 at 0x12
> i2c-core.o: client [VES1820] registered to adapter [saa7146(1)](pos. 0).
> VES1820: attached to adapter saa7146(1)
> tuner: chip found @ 0x61
> i2c-core.o: client [i2c tv tuner chip] registered to adapter
> [saa7146(1)](pos. 1).
> i2c-core.o: adapter saa7146(1) registered as adapter 0.
> dvb0: AV7111 - firm f0240009, rtsl b0250018, vid 71010068, app 00010002
> dvb0: DVB-C analog module detected, initializing MSP3400
> dvb: 1 dvb(s) found
> 
> Until this point everything is fine and I can see a TV-channel with my
> Siemens DVB-C card (analog modul / with CI Interface - Irdeto is not
> plugged)
> 
> I also tried different mixes from vdr/dvb packages (as seen on Klaus
> Homepage / linuxtv.org) but its the same result
> 
> Any ideas?
> 
> Help is highly appreciated
> 
> Regards Uwe
> 
> BTW: How to I apply the "diff" file from Klaus Homepage?
>      I tried "patch -p0 < filename" in the DVB/driver directory but I
> got an error message
> 
> 
> 
> 
> 
> 
> 
> 
> 
>