[vdr] Re: Strong Influences between cards

["Ulrich Petri" <ulope@gmx.de>]

Rainer Zocholl wrote:
> 
> I have a 1.5 and 1.3 card.
> 1.3 is the VDR-primary
> 
> They are connected to the LNB using a "2-way splitter" 
> (or 4-way, does not matter. BTW: I found that the SNR is increasing,
> when i do not terminate the unused pin)
> 
> If a record is running on the 1.5 card and i unplug
> the coax cable to that 1.5 card, the "primary"-image from
> the 1.3 freezes too. Switching channels do not help.
> 
> 
> Why?
> Rainer

Perhaps because its not designd to be Hotpluggable?
Try and disconnect the IDE cable of one disk, i bet the other one will
stop working too.

Cu Ulrich