Mailing List archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[vdr] Hauppauge DVB-c supported ???



Hello!

I have a Hauppauge DVB-c and tried to use it on my Linux System.

I am using the driver: siemens_dvb-0.9.4-2002-04-01

If I load the driver I get no error message and also no error
in /var/log/messages.
If I start VDR and try to switch to an other channel also nothing is
displayed and I get these messages in /var/log/messages:
May 26 18:16:27 melchior vdr[2595]: VDR version 1.0.2 started
May 26 18:16:27 melchior vdr[2595]: loading /video/setup.conf
May 26 18:16:27 melchior vdr[2595]: loading /video/channels.conf
May 26 18:16:27 melchior vdr[2595]: loading /video/timers.conf
May 26 18:16:27 melchior vdr[2595]: loading /video/svdrphosts.conf
May 26 18:16:27 melchior vdr[2595]: loading /video/keys-pc.conf
May 26 18:16:27 melchior vdr[2595]: probing /dev/ost/frontend0
May 26 18:16:27 melchior vdr[2597]: EIT processing thread started (pid=2597) - master
May 26 18:16:27 melchior vdr[2595]: probing /dev/ost/frontend1
May 26 18:16:27 melchior vdr[2595]: found 1 video device
May 26 18:16:27 melchior vdr[2595]: setting primary DVB to 1
May 26 18:16:27 melchior vdr[2595]: reading EPG data from /video/epg.data
May 26 18:16:27 melchior vdr[2595]: switching to channel 23
May 26 18:16:32 melchior vdr[2595]: ERROR: timeout while tuning
May 26 18:16:32 melchior vdr[2595]: SVDRP listening on port 2001
May 26 18:16:32 melchior vdr[2595]: setting watchdog timer to 60 seconds
May 26 18:16:32 melchior vdr[2595]: switching to channel 22
May 26 18:16:37 melchior vdr[2595]: ERROR: timeout while tuning
May 26 18:16:37 melchior vdr[2595]: max. latency time 5 seconds
May 26 18:16:37 melchior vdr[2595]: switching to channel 21
May 26 18:16:42 melchior vdr[2595]: ERROR: timeout while tuning

I am using channels.conf.cable from the vdr-1.0.2 packet, but
I know that these config will not really work for me because I
live in Vienna and I am using the service from UPC-Telekabel.
Where / How can I get a working channels.conf for me?


-- 
best regards
Martin Neuditschko




Home | Main Index | Thread Index