[vdr] Re: Horizontal channels again

[Steffen Koch <Steffen.Koch@sphinx-electronics.de>]

Joerg Riechardt wrote:
>> I found out that it was trying to record a timer on a
>>horizontal channel and couldn't tune to that channel.
> The 18 Volt from the DVBs card should switch the LNB to horizontal.
> If they don't, maybe not enough volt arive at the LNB.
> Possible reason: weak power supply, long cable, too high resitance at
> connectors.Or weak voltage regulator or LNBP on the DVBs card.
> Or the LNB might have a problem or need too much voltage.
> You can find out by measuring the voltages, while everything is connected.
The only problem with this is, that i was working for a year now without 
any problems. Only one reboot too much could ruin your hole day.. ;-))