Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[vdr] Re: LNB sharing in 1.1.x ?
Hello,
> I've had a short look into the vdr 1.1.x-sources and in the original "lnb-sharing"-patch
> for 1.0.x (I suggested this feature for 1.1.x a while ago, maybe I started this thread ??)
Yes, I think you started it..
> to figure out how I could implement it. IMO, there are only 2 things to do:
> 1. Preventing vdr to switch the polarisation/SLOF/satellite when a recording
> (with a higher priority) is in progress. vdr does already something like this
> (when recording, it "locks" the card to channels on the same transponder),
> so this shouldn't be a big problem.
> 2. When switching a channel on one card, "cycling" through the other cards
> and switch them to the matching pol./SLOF/sat. This one is IMHO harder to implement.
> I think this would also work with diseqc,motor-management,whatever,...
IMHO this seems to be a proper solution, but since I am no
specialist, there maybe something not taken into account.
Other opinions ?
> I tried to do get the "original" patch into 1.1.x, but the structure changed to much and I don't have the programming skills and insight into the vdr-source to integrate this on my own...I'm hoping
> that someone else will do it and using "-D0" in the meanwhile ;) Disicon isn't an alternative since I can't change the dish-hardware (appartement-house with dish on the roof, I have to live with
> only one line).
Hey, I am not the only one who gave up on integrating the old patch ;)
But I think the LNB-sharing stuff is already on Klaus' todo list (
although with low priority... )
Greetings,
Juergen
--
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe vdr" as subject.
Home |
Main Index |
Thread Index