[vdr] Re: Diseqc.conf and triax "2 in 1"

[Marius Berntsberg <marius@berntsberg.net>]

On Thu, 2002-11-07 at 17:41, Oliver Endriss wrote:
> Marius Berntsberg wrote:
> > Hi!
> >
> > I have a problem whit my lnb switch, on the unit it is printed "Triax
> > Diseqc 2 in 1 (posision / toneburst)".When i try to use this device
> > whith vdr 1.1.15,i cant get my second lnb to
> >  work,all worked fine in vdr < 1.1.11.
> >
> > I have tryed to configure diseqc.conf and source.conf, and end up
> > beeing able to watch channels on the first lnb on my dich. I cant get
> > anything out of the second lnb.
> > channels on first lnb works fine after restart of vdr, if i change to
> > a channel on the second lnb, vdr hangs for a few secs, screen goes
> > black, then when trying to switch back to a channel on first lnb,
> > same thing happens..
> > Diseqc.conf:
> > S1W  12700 V  9750 t W15 [E0 10 38 F0]
>         ^
> > S1W  99999 V 10600 T W15 [E0 10 38 F1]
>                      ^
> > S1W  12700 H  9750 t W15 [E0 10 38 F2]
> > S1W  99999 H 10600 T W15 [E0 10 38 F3]
> >
> > S5E  12700 V  9750 t W15 [E0 10 38 F4]
> > S5E  99999 V 10600 T W15 [E0 10 38 F5]
> > S5E  12700 H  9750 t W15 [E0 10 38 F6]
> > S5E  99999 H 10600 T W15 [E0 10 38 F7]
> 
> The sequences above look very strange...
> 
> First, you should try a full DiSEqC sequence:
> S1W  11700 V  9750  t v W15 [E0 10 38 F0] W15 A W15 t
> S1W  99999 V 10600  t v W15 [E0 10 38 F1] W15 A W15 T
> S1W  11700 H  9750  t V W15 [E0 10 38 F2] W15 A W15 t
> S1W  99999 H 10600  t V W15 [E0 10 38 F3] W15 A W15 T
> 
> S5E  11700 V  9750  t v W15 [E0 10 38 F4] W15 B W15 t
> S5E  99999 V 10600  t v W15 [E0 10 38 F5] W15 B W15 T
> S5E  11700 H  9750  t V W15 [E0 10 38 F6] W15 B W15 t
> S5E  99999 H 10600  t V W15 [E0 10 38 F7] W15 B W15 T
> 
> optimized for mini DiSEqC (aka toneburst):
> S1W  11700 V  9750  t v W15 A W15 t
> S1W  99999 V 10600  t v W15 A W15 T
> S1W  11700 H  9750  t V W15 A W15 t
> S1W  99999 H 10600  t V W15 A W15 T
> 
> S5E  11700 V  9750  t v W15 B W15 t
> S5E  99999 V 10600  t v W15 B W15 T
> S5E  11700 H  9750  t V W15 B W15 t
> S5E  99999 H 10600  t V W15 B W15 T
> 
> optimized for full DiSEqC:
> S1W  11700 V  9750  [E0 10 38 F0]
> S1W  99999 V 10600  [E0 10 38 F1]
> S1W  11700 H  9750  [E0 10 38 F2]
> S1W  99999 H 10600  [E0 10 38 F3]
> 
> S5E  11700 V  9750  [E0 10 38 F4]
> S5E  99999 V 10600  [E0 10 38 F5]
> S5E  11700 H  9750  [E0 10 38 F6]
> S5E  99999 H 10600  [E0 10 38 F7]
> (If switching is unreliable, retransmissions should be added)
> 
> Oliver

Thanks Oliver!

Your config for the mini diseqc works perfectly! :-)

Marius Berntsberg



-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe vdr" as subject.