[vdr] Re: No picture after starting VDR 1.1.16 under Debian

[Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de>]

Christian Saalborn wrote:
> 
> Hello,
> 
> my problem is that I get only an empty xterm after starting vdr.
> I have debian with 2.4.19 kernel and a siemens DVB-C card. I have also
> the problem with the older siemens-drivers and vdr 1.0.4 . I append the
> output of make insmod and ./vdr -c /dvb/VDR .
> 
> Thx in advance,
> Christian
> 
> make insmod console output :
> 
> (                       \
> insmod videodev;        \
>           \
> insmod dvb-core.o;      \
> make -C frontends insmod; \
>  make -C av7110 insmod; \
> )
> Using /lib/modules/2.4.19/kernel/drivers/media/video/videodev.o
> make[1]: Entering directory `/dvb/linux-dvb.2002-11-01/driver/frontends'
> insmod alps_bsru6.o;   insmod alps_bsrv2.o;   insmod alps_tdmb7.o;
> insmod alps_tdlb7.o;   insmod grundig_29504-401.o;   insmod
> grundig_29504-491.o;   insmod ves1820.o;
> make[1]: Leaving directory `/dvb/linux-dvb.2002-11-01/driver/frontends'
> make[1]: Entering directory `/dvb/linux-dvb.2002-11-01/driver/av7110'
> insmod input; \
> insmod evdev; \
> insmod dvb-ttpci.o init_vpid=0x00a2 init_apid=0x0060;
> Using /lib/modules/2.4.19/kernel/drivers/input/input.o
> insmod: a module named input already exists
> Using /lib/modules/2.4.19/kernel/drivers/input/evdev.o
> make[1]: Leaving directory `/dvb/linux-dvb.2002-11-01/driver/av7110'
> sync
> 
> /var/log/syslog
> 
> Nov 13 17:42:48 clive kernel: Linux video capture interface: v1.00
> Nov 13 17:42:49 clive kernel: dvb_register_adapter: registering new
> adapter (Siemens cable card PCI rev1.5).
> Nov 13 17:42:49 clive kernel: saa7146_core.o: : bus:0, rev:1,
> mem:0xe28d3c00.
> Nov 13 17:42:52 clive kernel: av7110 (0): AV7111 - firm f0240009, rtsl
> b0250018, vid 71010068, app 00012502
> Nov 13 17:42:53 clive kernel: dvb_frontend_init: initialising frontend
> 0:0 (VES1820/Grundig tuner as used on the Siemens DVB-C card)...
> Nov 13 17:42:54 clive kernel: ves1820.c: setup for tuner spXXXX
> 
> /var/log/messages
> 
> Nov 13 17:42:48 clive kernel: Linux video capture interface: v1.00
> Nov 13 17:42:49 clive kernel: dvb_register_adapter: registering new
> adapter (Siemens cable card PCI rev1.5).
> Nov 13 17:42:52 clive kernel: av7110 (0): AV7111 - firm f0240009, rtsl
> b0250018, vid 71010068, app 00012502
> Nov 13 17:42:53 clive kernel: dvb_frontend_init: initialising frontend
> 0:0 (VES1820/Grundig tuner as used on the Siemens DVB-C card)...
> Nov 13 17:42:54 clive kernel: ves1820.c: setup for tuner spXXXX
> 
> Starting VDR 1.1.16 in a xterm with ./vdr -c /dvb/VDR
> 
> /var/log/messages
> 
> Nov 13 18:00:27 clive vdr[909]: VDR version 1.1.16 started
> Nov 13 18:00:27 clive vdr[909]: loading /dvb/VDR/sources.conf
> Nov 13 18:00:27 clive vdr[909]: loading /dvb/VDR/diseqc.conf
> Nov 13 18:00:27 clive vdr[909]: loading /dvb/VDR/channels.conf
> Nov 13 18:00:27 clive vdr[909]: loading /dvb/VDR/svdrphosts.conf
> Nov 13 18:00:27 clive vdr[909]: loading /dvb/VDR/ca.conf
> Nov 13 18:00:27 clive vdr[909]: loading /dvb/VDR/keymacros.conf
> Nov 13 18:00:27 clive vdr[909]: found 1 video device
> Nov 13 18:00:27 clive vdr[909]: setting primary device to 1
> Nov 13 18:00:27 clive vdr[909]: SVDRP listening on port 2001
> 
> /var/log/syslog
> 
> Nov 13 18:00:27 clive vdr[909]: VDR version 1.1.16 started
> Nov 13 18:00:27 clive vdr[909]: loading /dvb/VDR/sources.conf
> Nov 13 18:00:27 clive vdr[909]: loading /dvb/VDR/diseqc.conf
> Nov 13 18:00:27 clive vdr[909]: loading /dvb/VDR/channels.conf
> Nov 13 18:00:27 clive vdr[909]: loading /dvb/VDR/svdrphosts.conf
> Nov 13 18:00:27 clive vdr[909]: loading /dvb/VDR/ca.conf
> Nov 13 18:00:27 clive vdr[909]: loading /dvb/VDR/keymacros.conf
> Nov 13 18:00:27 clive vdr[909]: probing /dev/dvb/adapter0/frontend0
> Nov 13 18:00:27 clive vdr[911]: EIT processing thread started (pid=911)
> - master
> Nov 13 18:00:27 clive vdr[909]: probing /dev/dvb/adapter1/frontend0
> Nov 13 18:00:27 clive vdr[909]: found 1 video device
> Nov 13 18:00:27 clive vdr[909]: setting primary device to 1
> Nov 13 18:00:27 clive vdr[909]: SVDRP listening on port 2001
> Nov 13 18:00:27 clive vdr[912]: KBD remote control thread started
> (pid=912)
> Nov 13 18:00:27 clive vdr[909]: remote control KBD - learning keys

VDR is trying to learn the remote control keys (in this case the PC keyboard
is used as remote control). You should be seeing some text like "Learning keys..."
in the OSD on the tv screen. Don't you see that?

Klaus
-- 
_______________________________________________________________

Klaus Schmidinger                       Phone: +49-8635-6989-10
CadSoft Computer GmbH                   Fax:   +49-8635-6989-40
Hofmark 2                               Email:   kls@cadsoft.de
D-84568 Pleiskirchen, Germany           URL:     www.cadsoft.de
_______________________________________________________________


-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe vdr" as subject.