[vdr] SV: Re: SV: CAM support, was Improved CAM support in VDR

[Tomas Prybil <tomas.prybil@copper.se>]

I get somewhat different behaviour.

Vdr dumps about 4 Megs of logs.
The first 10% of the file is "slot 0 status 0000".
Then it reads "slot 0 status 0001" until 11 lines of "--> 00 01 82 01 01".

This is the case both with Conax and the Viaccess CAMs. With no CAM inserted
I get slot 0 status 0000.

/t 

-----Ursprungligt meddelande-----
Från: Klaus Schmidinger [mailto:Klaus.Schmidinger@cadsoft.de]
Skickat: den 12 januari 2003 13:32
Till: vdr@linuxtv.org
Ämne: [vdr] Re: SV: CAM support, was Improved CAM support in VDR


Klaus Schmidinger wrote:
> 
> micael.beronius@telia.com wrote:
> >
> > I tried once more. I now pulled the card and re-seated it. I then got;
> >
> > slot 0  state 0003
> > slot 1  state 0000
> > -->> 00 01 82 01 01
> > -->> 00 01 82 01 01
> > -->> 00 01 82 01 01
> > -->> 00 01 82 01 01
> > -->> 00 01 82 01 01
> > -->> 00 01 82 01 01
> > -->> 00 01 82 01 01
> > -->> 00 01 82 01 01
> > -->> 00 01 82 01 01
> > -->> 00 01 82 01 01
> > -->> 00 01 82 01 01
> >
> >  Micael
> 
> Ok so now the CAM is detected to be "present", but still no response is
> received from it. As I stated in my previous reply I assume the CA_RESET
> is not working...

I guess I just found something here: apparently the parameter to the
CA_RESET
ioctl() call is not the slot index, but rather flag word containign a '1'
bit for
every slot that shall be reset. Please give the new
ftp://ftp.cadsoft.de/vdr/Developer/ci.c
a try, in which I have changed this (there may be lots of "slot 0  state
0001" messages at
stdout, but maybe this change activates the actual CA_RESET, which
previously wasn't
executed since the slot parameter was '0').

Klaus
-- 
_______________________________________________________________

Klaus Schmidinger                       Phone: +49-8635-6989-10
CadSoft Computer GmbH                   Fax:   +49-8635-6989-40
Hofmark 2                               Email:   kls@cadsoft.de
D-84568 Pleiskirchen, Germany           URL:     www.cadsoft.de
_______________________________________________________________


-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe vdr" as
subject.


--
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe vdr" as subject.