[vdr] Re: VDR-1.1.21+new driver+Conax 3.03 problems continued

To: vdr@linuxtv.org
Subject: [vdr] Re: VDR-1.1.21+new driver+Conax 3.03 problems continued
From: Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de>
Date: Sun, 12 Jan 2003 17:21:38 +0100
Content-transfer-encoding: quoted-printable
Content-type: text/plain; charset=iso-8859-1
Organization: CadSoft Computer GmbH
References: <20030112180203.B74033-100000@kallioluola.heinola.org>
Reply-to: vdr@linuxtv.org
Sender: kls@cadsoft.de
Sender: vdr-bounce@linuxtv.org

Bror Heinola wrote:
> 
> Ok, here's the latest. Compiled with the extra debug defined in eit.c and
> also with the latest ci.c version.
> 
> [root@htpc VDR]# ./vdr -Premote
> slot 0  state 0001

This is a little strange here, since it means that the CAM in slot 0 is present,
but not ready. I would expect a line saying

slot 0  state 0003

> slot 1  state 0001
> slot 1  state 0003

Are you _absolutely_, _positively_ sure that your CAM is inserted in slot 0?

> --> 00 01 82 01 01
> <-- 00 01 83 01 01 80 02 01 00
>     .  .  .  .  .  .  .  .  .
> --> 00 01 A0 01 01
> <-- 00 01 80 02 01 80
>     .  .  .  .  .  .
> --> 00 01 81 01 01
> <-- 00 01 A0 07 01 91 04 00 01 00 41 80 02 01 00
>     .  .     .  .  .  .  .  .  .  A  .  .  .  .
> OpenSession 00010041
> New Resource Manager (session id 1)
> --> 00 01 A0 0A 01 92 07 00 00 01 00 41 00 01
> <-- 00 01 80 02 01 00
>     .  .  .  .  .  .
> --> 00 01 A0 01 01
> <-- 00 01 80 02 01 00
>     .  .  .  .  .  .
> 1: ==> Profile Enq
> --> 00 01 A0 09 01 90 02 00 01 9F 80 10 00
> <-- 00 01 80 02 01 00
>     .  .  .  .  .  .
> --> 00 01 A0 01 01
> <-- 00 01 80 02 01 80
>     .  .  .  .  .  .
> --> 00 01 81 01 01
> <-- 00 01 A0 82 00 09 01 90 02 00 01 9F 80 11 00 80 02 01 00
>     .  .     .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
> 1: <== Profile
> 1: ==> Profile Change
> --> 00 01 A0 09 01 90 02 00 01 9F 80 12 00
> <-- 00 01 80 02 01 00
>     .  .  .  .  .  .
> --> 00 01 A0 01 01
> <-- 00 01 80 02 01 80
>     .  .  .  .  .  .
> --> 00 01 81 01 01
> <-- 00 01 A0 07 01 91 04 00 02 00 41 80 02 01 00
>     .  .     .  .  .  .  .  .  .  A  .  .  .  .
> OpenSession 00020041
> New Aplication Information (session id 2)
> --> 00 01 A0 0A 01 92 07 00 00 02 00 41 00 02
> <-- 00 01 80 02 01 00
>     .  .  .  .  .  .
> --> 00 01 A0 01 01
> <-- 00 01 80 02 01 00
>     .  .  .  .  .  .
> 2: ==> Application Info Enq
> --> 00 01 A0 09 01 90 02 00 02 9F 80 20 00
> <-- 00 01 80 02 01 00
>     .  .  .  .  .  .
> --> 00 01 A0 01 01
> <-- 00 01 80 02 01 80
>     .  .  .  .  .  .
> --> 00 01 81 01 01
> <-- 00 01 A0 82 00 1E 01 90 02 00 02 9F 80 21 15 01 12 34 FE DC 0F 4B E4 79 74
> 74 F6 6B 6F 6E 74 72 6F 6C 6C 69 80 02 01 00
>     .  .     .  .  .  .  .  .  .  .  .  .  !  .  .  .  4  þ  Ü  .  K  ä  y  t
> t  ö  k  o  n  t  r  o  l  l  i  .  .  .  .
> 2: <== Application Info
> --> 00 01 A0 01 01
> <-- 00 01 80 02 01 80
>     .  .  .  .  .  .
> --> 00 01 81 01 01
> <-- 00 01 A0 07 01 91 04 00 03 00 41 80 02 01 00
>     .  .     .  .  .  .  .  .  .  A  .  .  .  .
> OpenSession 00030041
> New Conditional Access Support (session id 3)
> --> 00 01 A0 0A 01 92 07 00 00 03 00 41 00 03
> <-- 00 01 80 02 01 00
>     .  .  .  .  .  .
> --> 00 01 A0 01 01
> <-- 00 01 80 02 01 00
>     .  .  .  .  .  .
> 3: ==> Ca Info Enq
> --> 00 01 A0 09 01 90 02 00 03 9F 80 30 00
> <-- 00 01 80 02 01 00
>     .  .  .  .  .  .
> --> 00 01 A0 01 01
> <-- 00 01 80 02 01 80
>     .  .  .  .  .  .
> --> 00 01 81 01 01
> <-- 00 01 A0 82 00 0B 01 90 02 00 03 9F 80 31 02 0B 00 80 02 01 00
>     .  .     .  .  .  .  .  .  .  .  .  .  1  .  .  .  .  .  .  .
> --> 00 01 A0 01 01
> <-- 00 01 80 02 01 00
>     .  .  .  .  .  .
> --> 00 01 A0 01 01
> <-- 00 01 80 02 01 00
>     .  .  .  .  .  .
> --> 00 01 A0 01 01
> <-- 00 01 80 02 01 00
>     .  .  .  .  .  .
> --> 00 01 A0 01 01
> <-- 00 01 80 02 01 00
>     .  .  .  .  .  .
> --> 00 01 A0 01 01
> <-- 00 01 80 02 01 00
>     .  .  .  .  .  .
> --> 00 01 A0 01 01
> <-- 00 01 80 02 01 00
>     .  .  .  .  .  .
> --> 00 01 A0 01 01
> <-- 00 01 80 02 01 00
>     .  .  .  .  .  .
> --> 00 01 A0 01 01
> <-- 00 01 80 02 01 00
>     .  .  .  .  .  .
> --> 00 01 A0 01 01
> <-- 00 01 80 02 01 00
>     .  .  .  .  .  .
> --> 00 01 A0 01 01
> <-- 00 01 80 02 01 00
>     .  .  .  .  .  .
> --> 00 01 A0 01 01
> <-- 00 01 80 02 01 00
>     .  .  .  .  .  .
> 
> Jan 12 18:01:23 htpc vdr[29475]: VDR version 1.1.21 started
> Jan 12 18:01:23 htpc vdr[29475]: loading plugin:
> ./PLUGINS/lib/libvdr-remote.so.1.1.21
> Jan 12 18:01:23 htpc vdr[29475]: loading /video/setup.conf
> Jan 12 18:01:23 htpc vdr[29475]: loading /video/sources.conf
> Jan 12 18:01:23 htpc vdr[29475]: loading /video/diseqc.conf
> Jan 12 18:01:23 htpc vdr[29475]: loading /video/channels.conf
> Jan 12 18:01:23 htpc vdr[29475]: loading /video/timers.conf
> Jan 12 18:01:23 htpc vdr[29475]: loading /video/svdrphosts.conf
> Jan 12 18:01:23 htpc vdr[29475]: loading /video/ca.conf
> Jan 12 18:01:23 htpc vdr[29475]: loading /video/remote.conf
> Jan 12 18:01:23 htpc vdr[29475]: loading /video/keymacros.conf
> Jan 12 18:01:27 htpc vdr[29475]: CAM: Käyttökontrolli, 01, 1234, FEDC
> Jan 12 18:01:30 htpc vdr[29475]: found 1 video device
> Jan 12 18:01:30 htpc vdr[29475]: ERROR: unexpected tag while reading EPG data:
> c
> Jan 12 18:01:30 htpc vdr[29475]: starting plugin: remote (0.0.1): Remote
> control
> Jan 12 18:01:30 htpc vdr[29475]: setting primary device to 1
> Jan 12 18:01:30 htpc vdr[29475]: SVDRP listening on port 2001
> Jan 12 18:01:30 htpc vdr[29475]: switching to channel 12
> 
> That line above is the only line I get about a CAM.
> 
> When I keep changing channels with the remote (FTA to encrypted & back)
> I sometimes (not always) get output like this:
> 
> --> 00 01 A0 27 01 90 02 00 03 9F 80 32 1E 03 00 08 00 00 00 00 03 84 00 07 01
> 09 04 22 F0 E2 0A 00 03 85 00 07 01 09 04 22 F0 E2 0A
> <-- 00 01 80 02 01 00
>     .  .  .  .  .  .
> --> 00 01 A0 01 01
> <-- 00 01 80 02 01 00
>     .  .  .  .  .  .
> --> 00 01 A0 27 01 90 02 00 03 9F 80 32 1E 03 01 99 00 00 00 00 03 20 00 07 01
> 09 04 0B 00 E0 69 00 03 21 00 07 01 09 04 0B 00 E0 69
> <-- 00 01 80 02 01 00
>     .  .  .  .  .  .
> --> 00 01 A0 01 01
> <-- 00 01 80 02 01 00
>     .  .  .  .  .  .
> --> 00 01 A0 27 01 90 02 00 03 9F 80 32 1E 03 02 C3 00 00 00 00 02 06 00 07 01
> 09 04 0B 00 E0 6A 00 02 86 00 07 01 09 04 0B 00 E0 6A
> <-- 00 01 80 02 01 00
>     .  .  .  .  .  .
> --> 00 01 A0 27 01 90 02 00 03 9F 80 32 1E 03 02 C2 00 00 00 00 02 05 00 07 01
> 09 04 0B 00 E0 69 00 02 85 00 07 01 09 04 0B 00 E0 69
> <-- 00 01 80 02 01 00
>     .  .  .  .  .  .
> --> 00 01 A0 27 01 90 02 00 03 9F 80 32 1E 03 02 C1 00 00 00 00 02 04 00 07 01
> 09 04 0B 00 E0 68 00 02 84 00 07 01 09 04 0B 00 E0 68
> <-- 00 01 80 02 01 00
>     .  .  .  .  .  .
> --> 00 01 A0 27 01 90 02 00 03 9F 80 32 1E 03 02 C0 00 00 00 00 02 03 00 07 01
> 09 04 0B 00 E0 67 00 02 83 00 07 01 09 04 0B 00 E0 67
> <-- 00 01 80 02 01 00
>     .  .  .  .  .  .
> --> 00 01 A0 27 01 90 02 00 03 9F 80 32 1E 03 02 BF 00 00 00 00 02 02 00 07 01
> 09 04 0B 00 E0 66 00 02 82 00 07 01 09 04 0B 00 E0 66
> <-- 00 01 80 02 01 00
>     .  .  .  .  .  .
> --> 00 01 A0 27 01 90 02 00 03 9F 80 32 1E 03 02 BE 00 00 00 00 02 01 00 07 01
> 09 04 0B 00 E0 65 00 02 81 00 07 01 09 04 0B 00 E0 65
> <-- 00 01 80 02 01 00

These are CA descriptors being sent to your CAM. I really wonder why you didn't
get any output in the log file for them. Are you sure that you have correctly
enabled the debug output in eit.c (and re-compiled VDR)?

Have you set the logging level to something other than the default value?
You should set it to 3 to see the debugging output. Use the option '-l3' when
running VDR.

Klaus
-- 
_______________________________________________________________

Klaus Schmidinger                       Phone: +49-8635-6989-10
CadSoft Computer GmbH                   Fax:   +49-8635-6989-40
Hofmark 2                               Email:   kls@cadsoft.de
D-84568 Pleiskirchen, Germany           URL:     www.cadsoft.de
_______________________________________________________________


--
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe vdr" as subject.

References:
- [vdr] VDR-1.1.21+new driver+Conax 3.03 problems continued
  - From: Bror Heinola <sat@heinola.org>

Prev by Date: [vdr] Re: SV: CAM support, was Improved CAM support in VDR
Next by Date: [vdr] Re: SV: Re: CAM support, was Improved CAM support in VDR
Previous by thread: [vdr] VDR-1.1.21+new driver+Conax 3.03 problems continued
Next by thread: [vdr] SV: Re: CAM support, was Improved CAM support in VDR
Index(es):
- Date
- Thread

Home | Main Index | Thread Index