[vdr] VDR 1.1.x Lirc BUG

["Philippe" <philippe@accuitee.com>]

Hi,
Sorry for my bad english.
 
Well I use VDR since September 2002 and it was working quite well 
Last week I have installed LIRC and I've compiled VDR with the following
command :
make clean
make NO_KBD=1 REMOTE=LIRC FAT=1
make plugins
 
Everything was working fine except the remote control.
 
Let me explain it :
 
I use a channel.conf like this :
:@1 Nationnales
TF1:841500:M64:C:6875:420:430:0:xxxx:1604:0:0:0
FRANCE 2:282562:M64:C:6875:7521:7522:0:xxxx:7502:0:0:0
FRANCE 3:282562:M64:C:6875:7531:7532:0:xxxx:7503:0:0:0
CANAL+:130625:M64:C:6875:160:80,81:0:xxxx:8201:0:0:0
PARIS PREMIERE:713875:M64:C:6875:163:92,93:0:xxxx:8154:0:0:0
M6:122500:M64:C:6875:420:430:0:xxxx:1204:0:0:0
TV 5:258625:M64:C:6110:164:112:0:xxxx:9012:0:0:0
:@10 Teasing
MULTIVISION:841500:M64:C:6875:320:330:0:xxxx:1603:0:0:0
:@12 Thematiques
CLUB TELEACHAT:122500:M64:C:6875:920:930:0:xxxx:1209:0:0:0
FRANCE 5:266625:M64:C:6875:160:80:0:xxxx:8501:0:0:0
ARTE:258625:M64:C:6110:167:136,137:0:xxxx:9019:0:0:0
:@20 Information
EURONEWS:266625:M64:C:6875:164:96,97:0:xxxx:8505:0:0:0
LCI:713875:M64:C:6875:166:104:0:xxxx:8156:0:0:0
I>TELE:162625:M64:C:6875:169:116:0:xxxx:8010:0:0:0
..
 
As you can see I use the @ feature
When I used the keyboard, I could type in 9 then 0 then 1 And VDR
switched to channel 901
 
Since I use lirc, everytime I start with 8 or 9 there is a segfault
 
I changed my channel.conf (I stripped out every line with an @) to have
something like this :
 
TF1:841500:M64:C:6875:420:430:0:xxxx:1604:0:0:0
FRANCE 2:282562:M64:C:6875:7521:7522:0:xxxx:7502:0:0:0
FRANCE 3:282562:M64:C:6875:7531:7532:0:xxxx:7503:0:0:0
CANAL+:130625:M64:C:6875:160:80,81:0:xxxx:8201:0:0:0
PARIS PREMIERE:713875:M64:C:6875:163:92,93:0:xxxx:8154:0:0:0
M6:122500:M64:C:6875:420:430:0:xxxx:1204:0:0:0
TV 5:258625:M64:C:6110:164:112:0:xxxx:9012:0:0:0
MULTIVISION:841500:M64:C:6875:320:330:0:xxxx:1603:0:0:0
CLUB TELEACHAT:122500:M64:C:6875:920:930:0:xxxx:1209:0:0:0
FRANCE 5:266625:M64:C:6875:160:80:0:xxxx:8501:0:0:0
ARTE:258625:M64:C:6110:167:136,137:0:xxxx:9019:0:0:0
EURONEWS:266625:M64:C:6875:164:96,97:0:xxxx:8505:0:0:0
LCI:713875:M64:C:6875:166:104:0:xxxx:8156:0:0:0
I>TELE:162625:M64:C:6875:169:116:0:xxxx:8010:0:0:0
 
There are no more segfault except when I use a non existing channel.
 
 
I think that VDR handle very well the keyboard when an channel does not
exist but it seems that the error handling does'nt work with LIRC.
 
Thank you
 
PS: As I'm not good in linux / C I didn't find any clue to solve it. If
you could help me



-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe vdr" as subject.