[vdr] Re: ANNOUNCE: bitstreamout-0.42i (Was: AC3 over Soundcard(live and replay))

[H. Schöbel <hagen@schoebel-online.net>]

> Let's see if the attached patch may help with transfer mode.
> It may change the the status line showed by the LCDproc 
> plugin. Nevertheless just try it (in combination with 
> vdr-1.1.22-audio.dif).

First after channel switching the LCD shows the EPG data (normal
behavior). Short after the EPG (~ 4 seconds) the LCD shows
"Transfer-Mode" (on every Channel shown from Card 3).
 
> With this patch the attached receiver cInStream should be 
> detached by cChannelOutAC3::Replaying() and then the next call of
> cReplayOutAC3::Play() via the cAudios::PlayAudio() should 
> activate the AC3 out to the S/P-DIF of the sound card.

Here a log from vdr start, then switching to channel 3 (Pro-7) -no
Audio-, then channel 4 (Sat 1) - Stereo Audio digital-, then back to
Pro-7 -no Audio-, and then Sat 1. Looks like before...

Jan 30 14:46:38 video vdr[4096]: assuming manual start of VDR
Jan 30 14:46:38 video vdr[4096]: max. latency time 1 seconds
Jan 30 14:46:40 video vdr[4096]: switching to channel 3
Jan 30 14:46:40 video vdr[4112]: transfer thread started (pid=4112)
Jan 30 14:46:40 video vdr[4113]: receiver thread started on device 3
(pid=4113)
Jan 30 14:46:40 video modprobe: modprobe: Can't locate module snd-card-1
Jan 30 14:46:40 video vdr[4116]: receiver thread started on device 1
(pid=4116)
Jan 30 14:46:40 video modprobe: modprobe: Can't locate module snd-card-2
Jan 30 14:46:40 video modprobe: modprobe: Can't locate module snd-card-3
Jan 30 14:46:40 video vdr[4114]: INSTREAM: Synchronize AC3 thread
started (pid=4114)
Jan 30 14:46:40 video vdr[4114]: INSTREAM: thread can not set process
priority: Success
Jan 30 14:46:58 video vdr[4096]: switching to channel 4
Jan 30 14:46:58 video vdr[4112]: transfer thread ended (pid=4112)
Jan 30 14:46:58 video vdr[4113]: receiver thread ended on device 3
(pid=4113)
Jan 30 14:46:58 video vdr[4096]: buffer stats: 65424 (6%) used
Jan 30 14:46:58 video vdr[4114]: INSTREAM: Synchronize AC3 thread ended
(pid=4114)
Jan 30 14:46:58 video vdr[4116]: receiver thread ended on device 1
(pid=4116)
Jan 30 14:46:58 video vdr[4119]: transfer thread started (pid=4119)
Jan 30 14:46:58 video vdr[4120]: receiver thread started on device 3
(pid=4120)
Jan 30 14:47:12 video vdr[4096]: switching to channel 3
Jan 30 14:47:12 video vdr[4119]: transfer thread ended (pid=4119)
Jan 30 14:47:13 video vdr[4120]: receiver thread ended on device 3
(pid=4120)
Jan 30 14:47:13 video vdr[4096]: buffer stats: 40232 (3%) used
Jan 30 14:47:13 video vdr[4121]: transfer thread started (pid=4121)
Jan 30 14:47:13 video vdr[4122]: receiver thread started on device 3
(pid=4122)
Jan 30 14:47:13 video vdr[4123]: INSTREAM: Synchronize AC3 thread
started (pid=4123)
Jan 30 14:47:13 video vdr[4123]: INSTREAM: thread can not set process
priority: Success
Jan 30 14:47:13 video vdr[4124]: receiver thread started on device 1
(pid=4124)
Jan 30 14:47:27 video vdr[4096]: switching to channel 4
Jan 30 14:47:27 video vdr[4121]: transfer thread ended (pid=4121)
Jan 30 14:47:27 video vdr[4122]: receiver thread ended on device 3
(pid=4122)
Jan 30 14:47:27 video vdr[4096]: buffer stats: 37224 (3%) used
Jan 30 14:47:27 video vdr[4123]: INSTREAM: Synchronize AC3 thread ended
(pid=4123)
Jan 30 14:47:27 video vdr[4124]: receiver thread ended on device 1
(pid=4124)
Jan 30 14:47:27 video vdr[4125]: transfer thread started (pid=4125)
Jan 30 14:47:27 video vdr[4126]: receiver thread started on device 3
(pid=4126)

If I switch around the channels (not exessive, only between sat -with
transfermode- and cable-channels -without transfermode- and back) i get
an emergency exit :-(.

..Hagen




-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe vdr" as subject.