[vdr] mplayercluster plugin

["Gernot A. Weber" <gernot@quantumnet.de>]

Hi,

just tried to install mplayercluster plugin. Unfortunately I was not
able to get it working. My setup on the client side is:

PII-300
DXR3 as primary device
100MBit LAN

Server is an AMD XP2000+

At first I was not able to set the right source with the plugin setup
menu. But I hardcoded the right IP to setup.c

I copied recode-server to /usr/local/bin on the server and made a link
from /usr/bin/mplayer to /usr/local/bin/mplyer due to some path errors.
Now the server seems to work - accordingly to the logs, but the client
crashes immediately after starting an AVI...

Server:

recode-server: Initializing directory environment
recode-server: Listening on port 2003
recode-server: Connected to client (fileno = 4)
recode-server: Listening for command connection (port = 32804)
recode-server: Command connection established
recode-server: Receiving video data from client
Using GNU internationalization
Original domain: messages
Original dirname: /usr/share/locale
Current domain: mplayer
Current dirname: /usr/share/locale


MPlayer CVS-030125-20:25-3.2.2 (C) 2000-2003 Arpad Gereoffy (see DOCS)

CPU: Advanced Micro Devices Athlon 4 PM Palomino/Athlon MP
Multiprocessor/Athlon XP eXtreme Performance (Family: 6, Stepping: 2)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled with Runtime CPU Detection - WARNING - this is not optimal!
To get best performance, recompile MPlayer with
--disable-runtime-cpudetection
Reading config file /etc/mplayer/mplayer.conf
Reading config file /root/.mplayer/config
Reading /root/.mplayer/codecs.conf: can't open
'/root/.mplayer/codecs.conf': No such file or directory
Reading /etc/mplayer/codecs.conf: 49 audio & 130 video codecs
font: can't open file: /root/.mplayer/font/font.desc
font: can't open file: /usr/share/mplayer/font/font.desc
Using Linux hardware RTC timing (1024Hz).
Can't open input config file /root/.mplayer/input.conf : No such file or
directory
Can't open input config file /etc/mplayer/input.conf : No such file or
directory
Falling back on default (hardcoded) input config

Playing ./send.xxx
AVI file format detected.
VIDEO:  [DIVX]  704x576  24bpp  25.00 fps  1950.3 kbps (238.1 kbyte/s)
Clip info:
 Software: MEncoder CVS-030125-20:25-3.2.2 
========================================================================
==
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
MP3lib: init layer2&3 finished, tables done
AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 16000->192000 (128.0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
========================================================================
==
Opening video filter: [lavc]
Opening video filter: [scale=640:480]
========================================================================
==
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4)
========================================================================
==
Checking audio filter chain for 48000Hz/2ch/16bit ->
48000Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 48000 hz, little endian signed int 
AF_pre: 48000Hz 2ch Signed 16-bit (Little-Endian)
AO: [mpegpes] 48000Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 48000Hz/2ch/16bit ->
48000Hz/2ch/16bit...
Starting playback...
This file was encoded with libavcodec build 4654
VDec: vo config request - 704 x 576 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.22:1 - prescaling to correct movie aspect.
SwScaler: reducing / aligning filtersize 3 -> 4
SwScaler: reducing / aligning filtersize 3 -> 4
SwScaler: reducing / aligning filtersize 3 -> 2
SwScaler: reducing / aligning filtersize 3 -> 2

SwScaler: Area Averageing scaler, from Planar YV12 to Planar YV12 using
MMX2
VO: [mpegpes] 640x480 => 640x480 Mpeg PES 
recode-server: Couldn't write video data: Connection reset by peer 0 0%
recode-server: Waiting for mplayer process
Error at MB: 4992 A-V: -0.002 ct: -0.045   56/ 56   4% 22%  0.5% 0 0 0%
concealing errors
A:   2.3 V:   2.2 A-V:  0.041 ct: -0.041   57/ 57   6% 22%  0.5% 0 0 0%

Exiting... (End of file)
recode-server: Listening on port 2003

Client:

+ DVBDIR=/usr/src/DVB/driver
+ VDRPRG=/usr/local/bin/vdr
+ VDRCMD=/usr/local/bin/vdr -c /usr/local/vdr/etc -L
/usr/src/VDR/PLUGINS/lib   -Pdxr3 -Pmplayercluster -Pstreamc -w 60 
+ KILL=/usr/bin/killall -q -TERM
+ true
+ su -c '/usr/local/bin/vdr -c /usr/local/vdr/etc -L
/usr/src/VDR/PLUGINS/lib   -Pdxr3 -Pmplayercluster -Pstreamc -w 60 '
cretincreting 135196472
sende initpaket
ende initpaket
deleting 135196472
nach delete
/usr/local/bin/runvdr: line 46:  4820 Segmentation fault      su -c
"$VDRCMD" $VDRUSR
+ test 139 -eq 0

Any hints?

Thanks,

    Gernot



-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe vdr" as subject.