Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[vdr] Re: Nova-CI, dxr3 and vdr
-I dowloaded vdr 1.24, the new dvb driver and compiled it.
-Corrected channel 120 (VERONICA) of channels.conf to work with ca.conf
value 13001 (the Dutch Canal Digitaal) it's not a FTA channel anymore
(you pay about 15 euro/year for administration only, has something to do
with copyrights they buy for NL only).-Started ./vdr -Pdxr3
-Go to CiCAM and set cam 1 of device 1 (nova-ci) to 13001 .
-Switched to channel 120.
-> A black screen :-<
Feb 16 13:02:50 localhost vdr: switching to channel 120
Feb 16 13:03:15 localhost vdr: ERROR: no useful data seen within
10512960 byte of video stream
When starting the dvb driver I got the following error:
Feb 16 13:01:05 localhost kernel: DVB: registering new adapter
Feb 16 13:01:06 localhost kernel: stv0299.c: setup for tuner BSRU6,
Feb 16 13:01:06 localhost kernel: DVB: registering frontend 0:0
Feb 16 13:01:06 localhost kernel: outcom error
Feb 16 13:01:06 localhost last message repeated 2 times
Has anybody any suggestions or did I do something wrong?
Thanx in advance,
Van: email@example.com [mailto:firstname.lastname@example.org] Namens
Verzonden: vrijdag 14 februari 2003 15:35
Onderwerp: [vdr] Re: Nova-CI, dxr3 and vdr
I wil try it on sunday (with vdr 1.22 it didn't work):
-> download and compile the new versions of vdr and dvb
-> start vdr
-> turn the current channel to one that's encrypted and working under
anything else I've to do?
Has anybody else tried it yet?
In reply to Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de> on Fri Feb
14 15:30:28 2003:
> email@example.com wrote:
> > Hi,
> > Finaly I got my vdr with Nova and dxr3 cards running. Thanx to help
from several people on this list and the dxr3 list.
> > I saw a lot of activaty on hardware Common Interfaces and CAM
> > But that is only working on the high-end dvb cards I asume.
> > Has there been any development on that subject for the low-end cards
(like Nova-CI)? And when yes what is the current status of it?
> Whether or not these cards will work with VDR's new CAM support
> whether the new firmware's "Link Layer" interface can access them. VDR
> works on top of the Link Layer.
> Maybe you should just give it a try.
> Klaus Schmidinger Phone: +49-8635-6989-10
> CadSoft Computer GmbH Fax: +49-8635-6989-40
> Hofmark 2 Email: firstname.lastname@example.org
> D-84568 Pleiskirchen, Germany URL: www.cadsoft.de
> To unsubscribe send a mail to email@example.com with "unsubscribe
vdr" as subject.
To unsubscribe send a mail to firstname.lastname@example.org with "unsubscribe vdr"
To unsubscribe send a mail to email@example.com with "unsubscribe vdr" as subject.
Main Index |