[vdr] Re: diseqc.conf 4 lnb

[Andreas Henden <andreas.henden@vice-chairman.net>]

On Wed, 2003-03-19 at 13:10, Oliver Endriss wrote:
> Andreas Henden wrote:
> > ...
> > But there is some strange things going on. if we tune in on 5.0e you
> > have to tune in on a Horizontal channel first then you can watch
> > vertical channels. 19.2E has stopped working but 1.0w works on input3
> > ...
> 
> Please tell us what kind of LNBs are being used.
> - single (universal) LNB (one cable from each LNB)
> - twin LNB (two cables from each LNB) 
> - quad LNB (4 cables)
> or whatever ...
> 
> What type of switch are you using?
> - 4/1 (4 sat inputs, 1 receiver output)
> - 8/8  (8 sat inputs, 1 receiver output)
> or whatever ...
> 
> It's very difficult to help you unless you provide precise information.

There is four single (universal) LNB and a 4/1 diseqc switch. One cable
from each lnb into a diseqc switch with one cable to the computer.

> 
> Oliver
-- 
Andreas Henden <andreas.henden@vice-chairman.net>



-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe vdr" as subject.