[vdr] Re: DVB - RequestParameter error

To: vdr@linuxtv.org
Subject: [vdr] Re: DVB - RequestParameter error
From: Karlheinz.Pischke@t-online.de (Karlheinz Pischke)
Date: Thu, 07 Aug 2003 23:23:39 +0200
Content-type: text/plain; charset=iso-8859-1
Organization: home
References: <1060286570.2305.6.camel@LinuxRechner>
Reply-to: vdr@linuxtv.org
Sender: vdr-bounce@linuxtv.org

Aug  7 15:56:09 VDR-Rechner kernel: IRQ routing conflict for 00:11.5,
have irq 9, want irq 2

This line could indicate that the apic (pci / irq routing) is not
working correctly. I had a problem 3 days ago that a network card
did not want to work correctly.

I changed the kernel parameters for boot to 
..... acpi=force pci=noacpi ...
This setting disables the automagic PCI-IRQ rerouting but leaves 
other functionality of of acpi intact.

Give it a try.

> Sven Soltau schrieb:
> 
> Hello together,
> 
> I have got a problem (only sometimes) when I start my vdr - the
> DVB-card is not registering correct (Siemens DVB-S Rev. 1.3)
> As you can see from the log - but why does it happen sometimes?
> If it happens the DVB out doesn't show a picture - restart vdr doesn't
> help I have to reboot the hole system.
> 
> What can I do to get rid of this error?
> 
> Many thanks
> Sven
> 
> Aug  7 15:56:04 VDR-Rechner syslogd 1.4.1: restart.
> Aug  7 15:56:06 VDR-Rechner sshd[615]: Server listening on :: port 22.
> Aug  7 15:56:08 VDR-Rechner /usr/sbin/cron[712]: (CRON) STARTUP (fork
> ok)
> Aug  7 15:56:09 VDR-Rechner kernel: klogd 1.4.1, log source =
> /proc/kmsg started.
> Aug  7 15:56:09 VDR-Rechner kernel: Inspecting /boot/System.map
> Aug  7 15:56:09 VDR-Rechner kernel: Loaded 12775 symbols from
> /boot/System.map.
> Aug  7 15:56:09 VDR-Rechner kernel: Symbols match kernel version
> 2.4.18.
> Aug  7 15:56:09 VDR-Rechner kernel: Loaded 725 symbols from 26
> modules.
> Aug  7 15:56:09 VDR-Rechner kernel: hdc: CHECK for good STATUS
> Aug  7 15:56:09 VDR-Rechner kernel: Linux video capture interface:
> v1.00
> Aug  7 15:56:09 VDR-Rechner kernel: DVB: registering new adapter
> (Siemens/Technotrend/Hauppauge PCI rev1.3).
> Aug  7 15:56:09 VDR-Rechner kernel: PCI: Found IRQ 10 for device
> 00:0b.0
> Aug  7 15:56:09 VDR-Rechner kernel: saa7146_core.o: adjusting pci
> latency to 64
> Aug  7 15:56:09 VDR-Rechner kernel: DVB: registering frontend 0:0
> (Alps BSRV2)...
> 
> Here is the error
> 
> Aug  7 15:56:09 VDR-Rechner kernel: RequestParameter error
> Aug  7 15:56:09 VDR-Rechner kernel: DVB: AV711357876745(0) - firm
> 04042e00, rtsl 06f40000, vid 82c8c408, app 0000c442
> Aug  7 15:56:09 VDR-Rechner kernel: DVB: AV711357876745(0) - no
> firmware support for CI link layer interface
> Aug  7 15:56:09 VDR-Rechner kernel: outcom error
> Aug  7 15:56:09 VDR-Rechner kernel: outcom error
> Aug  7 15:56:09 VDR-Rechner kernel: av7110(0): adac type set to 0
> Aug  7 15:56:09 VDR-Rechner kernel: outcom error
> Aug  7 15:56:09 VDR-Rechner last message repeated 5 times
> Aug  7 15:56:09 VDR-Rechner kernel: via-rhine.c:v1.10-LK1.1.13
> Nov-17-2001  Written by Donald Becker
> Aug  7 15:56:09 VDR-Rechner kernel:
> http://www.scyld.com/network/via-rhine.html
> Aug  7 15:56:09 VDR-Rechner kernel: PCI: Assigned IRQ 9 for device
> 00:12.0
> Aug  7 15:56:09 VDR-Rechner kernel: eth0: VIA VT6102 Rhine-II at
> 0xb400, 00:0c:6e:1b:c7:64, IRQ 9.
> Aug  7 15:56:09 VDR-Rechner kernel: eth0: MII PHY found at address 1,
> status 0x7849 advertising 01e1 Link 0000.
> Aug  7 15:56:09 VDR-Rechner kernel: spurious 8259A interrupt: IRQ7.
> Aug  7 15:56:09 VDR-Rechner kernel: isapnp: Scanning for PnP cards...
> Aug  7 15:56:09 VDR-Rechner kernel: isapnp: No Plug & Play device
> found
> Aug  7 15:56:09 VDR-Rechner kernel: IPv6 v0.8 for NET4.0
> Aug  7 15:56:09 VDR-Rechner kernel: IPv6 over IPv4 tunneling driver
> Aug  7 15:56:09 VDR-Rechner kernel: PCI: Found IRQ 2 for device
> 00:11.5
> Aug  7 15:56:09 VDR-Rechner kernel: IRQ routing conflict for 00:11.5,
> have irq 9, want irq 2
> Aug  7 15:56:09 VDR-Rechner kernel: PCI: Setting latency timer of
> device 00:11.5 to 64
> 
> Boot log after reboot
> 
> Aug  7 17:05:13 VDR-Rechner kernel: klogd 1.4.1, log source =
> /proc/kmsg started.
> Aug  7 17:05:13 VDR-Rechner kernel: Inspecting /boot/System.map
> Aug  7 17:05:13 VDR-Rechner kernel: Loaded 12775 symbols from
> /boot/System.map.
> Aug  7 17:05:13 VDR-Rechner kernel: Symbols match kernel version
> 2.4.18.
> Aug  7 17:05:13 VDR-Rechner kernel: Loaded 725 symbols from 26
> modules.
> Aug  7 17:05:13 VDR-Rechner kernel: VFS: Disk change detected on
> device ide1(22,0)
> Aug  7 17:05:13 VDR-Rechner kernel: VFS: Disk change detected on
> device ide1(22,0)
> Aug  7 17:05:13 VDR-Rechner kernel: hdc: CHECK for good STATUS
> Aug  7 17:05:13 VDR-Rechner kernel: Linux video capture interface:
> v1.00
> Aug  7 17:05:13 VDR-Rechner kernel: DVB: registering new adapter
> (Siemens/Technotrend/Hauppauge PCI rev1.3).
> Aug  7 17:05:13 VDR-Rechner kernel: PCI: Found IRQ 10 for device
> 00:0b.0
> Aug  7 17:05:13 VDR-Rechner kernel: saa7146_core.o: adjusting pci
> latency to 64
> Aug  7 17:05:13 VDR-Rechner kernel: DVB: registering frontend 0:0
> (Alps BSRV2)...
> 
> why does it work here and not the first time ?
> 
> Aug  7 17:05:13 VDR-Rechner kernel: DVB: AV7111(0) - firm f0240009,
> rtsl b0250018, vid 71010068, app 80002618
> Aug  7 17:05:13 VDR-Rechner kernel: DVB: AV7111(0) - firmware supports
> CI link layer interface
> Aug  7 17:05:13 VDR-Rechner kernel: av7110(0): adac type set to 0
> Aug  7 17:05:13 VDR-Rechner kernel: via-rhine.c:v1.10-LK1.1.13
> Nov-17-2001  Written by Donald Becker
> Aug  7 17:05:13 VDR-Rechner kernel:
> http://www.scyld.com/network/via-rhine.html
> Aug  7 17:05:13 VDR-Rechner kernel: PCI: Assigned IRQ 9 for device
> 00:12.0
> Aug  7 17:05:13 VDR-Rechner kernel: eth0: VIA VT6102 Rhine-II at
> 0xb400, 00:0c:6e:1b:c7:64, IRQ 9.
> Aug  7 17:05:13 VDR-Rechner kernel: eth0: MII PHY found at address 1,
> status 0x786d advertising 01e1 Link 45e1.
> Aug  7 17:05:13 VDR-Rechner kernel: eth0: Setting full-duplex based on
> MII #1 link partner capability of 45e1.
> Aug  7 17:05:13 VDR-Rechner kernel: isapnp: Scanning for PnP cards...
> Aug  7 17:05:13 VDR-Rechner kernel: isapnp: No Plug & Play device
> found
> Aug  7 17:05:13 VDR-Rechner kernel: IPv6 v0.8 for NET4.0
> Aug  7 17:05:13 VDR-Rechner kernel: IPv6 over IPv4 tunneling driver
> Aug  7 17:05:13 VDR-Rechner kernel: PCI: Found IRQ 2 for device
> 00:11.5
> Aug  7 17:05:13 VDR-Rechner kernel: IRQ routing conflict for 00:11.5,
> have irq 9, want irq 2
> Aug  7 17:05:13 VDR-Rechner kernel: PCI: Setting latency timer of
> device 00:11.5 to 64
> Aug  7 17:05:13 VDR-Rechner kernel: ALSA
> ../../alsa-kernel/pci/ac97/ac97_codec.c:1450: AC'97 0:0 analog
> subsections not

-- 


Mit freundlichem Gruß

Karlheinz Pischke


Karlheinz Pischke
Schleissheimer Str. 63
80797 München

Email:  kh@khpi.de
Tel:    089 12162065
Fax:    089 12162066

(Mobil: 0172 8418644)


-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.

Follow-Ups:
- [vdr] Re: DVB - RequestParameter error
  - From: Sven Soltau <sven.soltau@web.de>

References:
- [vdr] DVB - RequestParameter error
  - From: Sven Soltau <sven.soltau@web.de>

Prev by Date: [vdr] [Announce] nvram-wakeup 0.91
Next by Date: [vdr] Problem with DVD-Plugin
Previous by thread: [vdr] DVB - RequestParameter error
Next by thread: [vdr] Re: DVB - RequestParameter error
Index(es):
- Date
- Thread

Home | Main Index | Thread Index