[vdr] Re: Another problem with my 3-dvb-s/1-c setup

[Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de>]

Jürgen Schmitz wrote:
> 
> Hi!
> 
> Again the story: I've switched from dvb-c to dvb-s today keeping my old
> dvb-c card as primary device for output - so every sat channel comes
> from one of the other dvb-s budget cards (so in transfer mode I've learnd).
> 
> As I see this, the first dvb-s card is choosen as device when I view.
> But now, when a recording starts one another channel vdr likes to use
> this card. However, this results in a freeze of the output on the screen
> (aka stopping transfer mode to primary device for output). So I have to
> switch to another channel and transfer mode works again using another
> card, I think, and I can go back to the first channel.
> 
> So it looks like vdr chooses an already used card (which isn't a good
> choice, maybe this is because I have primary limit setting (primär-limit
> in german) set to 0 - but I'm not really on the primary device) and
> forgets to activate transfer mode on another card.
> 
> 2nd: when the recording timer has finished and I switch to another
> channel vdr falls back to the first dvb-s card (vdr tells this to
> syslog) and then I get:
> clearing device because of consecutive poll timeouts
> kernel: OutCommand: timeout waiting for COMMAND idle
> kernel: SOutCommand error
> kernel: outcom error
> ERROR: ring buffer overflow
> 
> And finally the watchdog triggers a restart.
> 
> Any idea?

Which VDR and driver version are you using?

Klaus


-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.