[vdr] Analogtv Plugin help wanted

[tho68@ssisrl.com]

Hi

I'm trying to let vdr work with a Hauppauge pvr350 board using analogtv
PLUGIN. I followed the instructions in the README files, installed the
ivtv drivers, loaded the modules, patched vdr ......
I did all this operation with vdr 1.2.6 and vdr 1.3.12, in bith cases I
cannot see anithing displayed on the tv attached to pvr 350 output.
If i try cat /dev/video0 > nonsense.mpg and then try to play it I see a
film with the standard noise from a tv tuner with no antenna attached.

I Have no DVB card inserted
I am using a kernel 2.4.23
I dont load any DVB modules, only ivtv modules
I Have done no change on the vdr /video/setup.conf file
I haven't created any device in the /dev directory
In the same system I had before a dvb-s board and vdr was finely working

with vdr 1.3.12 in /var/log/messages I got


Sep  3 17:31:09 localhost vdr[10548]: VDR version 1.3.12 started
Sep  3 17:31:09 localhost vdr[10548]: loading plugin:
./PLUGINS/lib/libvdr-analogtv.so.1.3.12
Sep  3 17:31:09 localhost vdr[10548]: loading /video/setup.conf
Sep  3 17:31:09 localhost vdr[10548]: loading /video/sources.conf
Sep  3 17:31:09 localhost vdr[10548]: loading /video/diseqc.conf
Sep  3 17:31:09 localhost vdr[10548]: loading /video/channels.conf
Sep  3 17:31:09 localhost vdr[10548]: loading /video/timers.conf
Sep  3 17:31:09 localhost vdr[10548]: loading /video/commands.conf
Sep  3 17:31:09 localhost vdr[10548]: loading /video/svdrphosts.conf
Sep  3 17:31:09 localhost vdr[10548]: loading /video/ca.conf
Sep  3 17:31:09 localhost vdr[10548]: loading /video/remote.conf
Sep  3 17:31:09 localhost vdr[10548]: loading /video/keymacros.conf
Sep  3 17:31:09 localhost vdr[10548]: no DVB device found
Sep  3 17:31:09 localhost vdr[10548]: initializing plugin: analogtv
(0.9.34): Watch analogue TV
Sep  3 17:31:09 localhost vdr[10548]: setting primary device to 1
Sep  3 17:31:09 localhost vdr[10548]: device 1 has no MPEG decoder
Sep  3 17:31:09 localhost vdr[10548]: SVDRP listening on port 2001
Sep  3 17:31:09 localhost vdr[10548]: starting plugin: analogtv
Sep  3 17:31:09 localhost vdr[10548]: loading /video/themes/sttng-default.theme
Sep  3 17:31:09 localhost vdr[10548]: switching to channel 1



with vdr 1.2.6 in /var/log/messages I got

Sep  3 17:20:23 localhost vdr[7476]: VDR version 1.2.6 started
Sep  3 17:20:23 localhost vdr[7476]: loading plugin: ./PLUGINS/lib/libvdr-analogtv.so.1.2.6
Sep  3 17:20:23 localhost vdr[7476]: loading /video/setup.conf
Sep  3 17:20:23 localhost vdr[7476]: loading /video/sources.conf
Sep  3 17:20:23 localhost vdr[7476]: loading /video/diseqc.conf
Sep  3 17:20:23 localhost vdr[7476]: loading /video/channels.conf
Sep  3 17:20:23 localhost vdr[7476]: loading /video/timers.conf
Sep  3 17:20:23 localhost vdr[7476]: loading /video/commands.conf
Sep  3 17:20:23 localhost vdr[7476]: loading /video/svdrphosts.conf
Sep  3 17:20:23 localhost vdr[7476]: loading /video/ca.conf
Sep  3 17:20:23 localhost vdr[7476]: loading /video/remote.conf
Sep  3 17:20:23 localhost vdr[7476]: loading /video/keymacros.conf
Sep  3 17:20:23 localhost vdr[7476]: no DVB device found
Sep  3 17:20:23 localhost vdr[7476]: initializing plugin: analogtv
(0.9.34): Watch analogue TV
Sep  3 17:20:23 localhost vdr[7476]: setting primary device to 1
Sep  3 17:20:23 localhost vdr[7476]: device 1 has no MPEG decoder
Sep  3 17:20:23 localhost vdr[7476]: SVDRP listening on port 2001
Sep  3 17:20:23 localhost vdr[7476]: starting plugin: analogtv
Sep  3 17:20:23 localhost vdr[7476]: switching to channel 1


Dmesg output for ivtv.o module is

ivtv: version 0.1.9 (release) loading
ivtv: SGarray_size = 340, DSGarray_size = 16
ivtv: Found an iTVC15 based chip
PCI: Found IRQ 10 for device 00:08.0
tuner: chip found @ 0xc2
tuner(bttv): type forced to 5 (Philips PAL_BG (FI1216 and compatibles))
[insmod]
i2c-core.o: client [Philips PAL_BG (FI1216 and comp] registered to adapter
[ivtv i2c driver #0](pos. 0).
msp34xx: init: chip=MSP3418W-A2 +nicam +simple +radio
msp3410: daemon started
i2c-core.o: client [MSP3418W-A2] registered to adapter [ivtv i2c driver
#0](pos. 1).
msp3400: error while reading chip version
saa7114.c: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7114.c: detecting saa7114 client on address 0x42
saa7115.c: writing init values
status: (1E) 0x48, (1F) 0xc0
i2c-core.o: client [saa7115[1]] registered to adapter [ivtv i2c driver
#0](pos. 2).
i2c-core.o: adapter ivtv i2c driver #0 registered as adapter 0.
ivtv: Encoder revision: 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Registered v4l2 device, minor 0
ivtv: Registered v4l2 device, minor 32
ivtv: Registered v4l2 device, minor 224
ivtv: Registered v4l2 device, minor 16
ivtv: loaded