Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[vdr] Re: CAM Read Errors in VDR 1.3.14
On Mon, Oct 25, 2004 at 11:47:08AM +0300, Jan Ekholm wrote:
> >I also have two CAMs here, but don't have such a problem.
>
> I see these too, but mainly when VDR is started, rarely during normal use.
> The CAM works fine, but it usually takes 30s or so after a start before an
> encrypted channel can be tuned (which is when a few of these messages can
> be seen). Otherwise the CAM works as it should.
I had the exact same "problem" with vdr 1.3.12 and below. It magically
disappeared with 1.3.13, though.
/Klaus.
Home |
Main Index |
Thread Index