Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[vdr] Re: VDR 1.3.15 PANIC
Dimitrios Dimitrakos wrote:
>
> Am Dienstag, 2. November 2004 17:26 schrieb Klaus Schmidinger:
> > Dimitrios Dimitrakos wrote:
> > > Am Dienstag, 2. November 2004 16:14 schrieb Klaus Schmidinger:
> > > > Dimitrios Dimitrakos wrote:
> > > > > @Klaus
> > > > >
> > > > > setting a value different to 0 as watchdog timer
> > > > > VDR allways exit with :
> > > > >
> > > > > PANIC: watchdog timer expired - exiting!
> > > > >
> > > > > I can reproduce this anytime with vanilla VDR in a system with 2 FF
> > > > > cards.
> > > >
> > > > I am running VDR 1.3.15 with a watchdog timeout of 60 seconds, and
> > > > it works just fine.
> > > >
> > > > Klaus
> > >
> > > i test another maschine with 1xFF and 2xSS2 and all are fine.
> > > But a third machine with 2xFF have the same Problem
> > >
> > > VDR versions <= 1.3.14 works fine on all machines.
> >
> > I have 2 FF and one budget, which is pretty much a mix of what you
> > have. Since it works fine here I'm afraid I can't do any debugging
> > on this one.
> >
> > Klaus
>
> i put now the second card in record mode and the "PANIC" disapear ( the last
> 20 min ).
>
> Nov 2 17:24:28 artemis vdr[2590]: recording to
> '/video/Brisant/2004-11-02.17:10.50.99.rec/001.vdr'
> Nov 2 17:24:28 artemis vdr[2590]: file writer thread started (pid=2590,
> tid=1097157552)
> Nov 2 17:24:28 artemis vdr[2590]: recording thread started (pid=2590,
> tid=1099258800)
> Nov 2 17:24:28 artemis vdr[2590]: receiver on device 2 thread started
> (pid=2590, tid=1101360048)
> Nov 2 17:24:28 artemis vdr[2590]: TS buffer on device 2 thread started
> (pid=2590, tid=1105562544)
> Nov 2 17:27:13 artemis vdr[2590]: switching to channel 2
> Nov 2 17:30:17 artemis vdr[2590]: ERROR: unknown picture type '7'
> Nov 2 17:38:28 artemis vdr[2590]: buffer usage: 80% (tid=1101360048)
> Nov 2 17:38:29 artemis vdr[2590]: buffer usage: 40% (tid=1101360048)
> Nov 2 17:43:08 artemis vdr[2590]: timer 1 (79 1710-1753 'Brisant') set to
> event Die 02.11.2004 17:43-17:45 (VPS: 02.11 17:43) 'Alle Wetter!'
>
> without recording :
> Nov 2 16:48:44 artemis vdr[23502]: loading /opt/vdr/sources.conf
> Nov 2 16:48:44 artemis vdr[23502]: loading /opt/vdr/diseqc.conf
> Nov 2 16:48:44 artemis vdr[23502]: loading /opt/vdr/channels.conf
> Nov 2 16:48:45 artemis vdr[23502]: loading /opt/vdr/timers.conf
> Nov 2 16:48:45 artemis vdr[23502]: loading /opt/vdr/commands.conf
> Nov 2 16:48:45 artemis vdr[23502]: loading /opt/vdr/reccmds.conf
> Nov 2 16:48:45 artemis vdr[23502]: loading /opt/vdr/svdrphosts.conf
> Nov 2 16:48:45 artemis vdr[23502]: loading /opt/vdr/ca.conf
> Nov 2 16:48:45 artemis vdr[23502]: loading /opt/vdr/remote.conf
> Nov 2 16:48:45 artemis vdr[23502]: loading /opt/vdr/keymacros.conf
> Nov 2 16:48:45 artemis vdr[23502]: probing /dev/dvb/adapter0/frontend0
> Nov 2 16:48:45 artemis vdr[23502]: probing /dev/dvb/adapter1/frontend0
> Nov 2 16:48:45 artemis vdr[23502]: tuner on device 1 thread started
> (pid=23502, tid=1078614960)
> Nov 2 16:48:45 artemis vdr[23502]: Section handler thread started (pid=23502,
> tid=1080716208)
> Nov 2 16:48:45 artemis vdr[23502]: tuner on device 2 thread started
> (pid=23502, tid=1082817456)
> Nov 2 16:48:45 artemis vdr[23502]: Section handler thread started (pid=23502,
> tid=1084918704)
> Nov 2 16:48:45 artemis vdr[23502]: probing /dev/dvb/adapter2/frontend0
> Nov 2 16:48:45 artemis vdr[23502]: found 2 video devices
> Nov 2 16:48:45 artemis vdr[23502]: setting primary device to 1
> Nov 2 16:48:45 artemis vdr[23502]: SVDRP listening on port 2001
> Nov 2 16:48:45 artemis vdr[23502]:
> loading /opt/vdr/themes/classic-default.theme
> Nov 2 16:48:45 artemis vdr[23502]: remote control LIRC - keys known
> Nov 2 16:48:45 artemis vdr[23502]: remote control KBD - keys known
> Nov 2 16:48:45 artemis vdr[23502]: switching to channel 2
> Nov 2 16:48:45 artemis vdr[23502]: LIRC remote control thread started
> (pid=23502, tid=1087019952)
> Nov 2 16:48:45 artemis vdr[23502]: KBD remote control thread started
> (pid=23502, tid=1089121200)
> Nov 2 16:48:56 artemis vdr[23502]: setting watchdog timer to 60 seconds
> Nov 2 16:49:03 artemis vdr[23502]: max. latency time 1 seconds
> Nov 2 16:50:27 artemis vdr[23502]: max. latency time 22 seconds
> Nov 2 16:51:47 artemis vdr[23502]: PANIC: watchdog timer expired - exiting!
> Nov 2 16:51:48 artemis vdr[23502]: KBD remote control thread ended
> (pid=23502, tid=1089121200)
>
> @klaus
> I think if you remove the budget card you can reproduce the PANIC failure.
I have started my VDR with 'vdr -D0 -D2 -w 20' (-D1 would be the budget card)
and have programmed two timers to record on the second card:
Nov 2 18:01:43 video vdr[8956]: VDR version 1.3.15 started
Nov 2 18:01:43 video vdr[8956]: loading /video/setup.conf
Nov 2 18:01:43 video vdr[8956]: loading /video/sources.conf
Nov 2 18:01:43 video vdr[8956]: loading /video/diseqc.conf
Nov 2 18:01:43 video vdr[8956]: loading /video/channels.conf
Nov 2 18:01:44 video vdr[8956]: loading /video/timers.conf
Nov 2 18:01:44 video vdr[8956]: loading /video/commands.conf
Nov 2 18:01:44 video vdr[8956]: loading /video/reccmds.conf
Nov 2 18:01:44 video vdr[8956]: loading /video/svdrphosts.conf
Nov 2 18:01:44 video vdr[8956]: loading /video/ca.conf
Nov 2 18:01:44 video vdr[8956]: loading /video/remote.conf
Nov 2 18:01:44 video vdr[8956]: loading /video/keymacros.conf
Nov 2 18:01:44 video vdr[8956]: reading EPG data from /video/epg.data
Nov 2 18:01:47 video vdr[8956]: probing /dev/dvb/adapter0/frontend0
Nov 2 18:01:47 video vdr[8956]: video device offset is 0
Nov 2 18:01:47 video vdr[8959]: tuner on device 1 thread started (pid=8959, tid=16386)
Nov 2 18:01:47 video vdr[8960]: Section handler thread started (pid=8960, tid=32771)
Nov 2 18:01:47 video vdr[8956]: probing /dev/dvb/adapter2/frontend0
Nov 2 18:01:47 video vdr[8962]: tuner on device 3 thread started (pid=8962, tid=49156)
Nov 2 18:01:47 video vdr[8963]: Section handler thread started (pid=8963, tid=65541)
Nov 2 18:01:47 video vdr[8956]: found 2 video devices
Nov 2 18:01:47 video vdr[8956]: setting primary device to 1
Nov 2 18:01:47 video vdr[8956]: SVDRP listening on port 2001
Nov 2 18:01:47 video vdr[8956]: loading /video/themes/sttng-default.theme
Nov 2 18:01:47 video vdr[8956]: connecting to RCU remote control using code A
Nov 2 18:01:47 video vdr[8964]: RCU remote control thread started (pid=8964, tid=81926)
Nov 2 18:01:47 video vdr[8965]: KBD remote control thread started (pid=8965, tid=98311)
Nov 2 18:01:47 video vdr[8956]: remote control RCU - keys known
Nov 2 18:01:47 video vdr[8956]: remote control KBD - keys known
Nov 2 18:01:47 video vdr[8956]: switching to channel 1
Nov 2 18:01:47 video vdr[8956]: setting watchdog timer to 20 seconds
Nov 2 18:01:48 video vdr[8956]: timer 29 (1 1755-1805 'Test') start
Nov 2 18:01:48 video vdr[8956]: Title: 'Guten Abend RTL' Subtitle: '(null)'
Nov 2 18:01:48 video vdr[8956]: record /video/Test/2004-11-02.17:55.00.00.rec
Nov 2 18:01:48 video vdr[8956]: creating directory /video/Test
Nov 2 18:01:48 video vdr[8956]: creating directory /video/Test/2004-11-02.17:55.00.00.rec
Nov 2 18:01:49 video vdr[8956]: SpinUpDisk took 1.08 seconds
Nov 2 18:01:49 video vdr[8956]: recording to '/video/Test/2004-11-02.17:55.00.00.rec/001.vdr'
Nov 2 18:01:49 video vdr[8967]: file writer thread started (pid=8967, tid=114696)
Nov 2 18:01:49 video vdr[8968]: recording thread started (pid=8968, tid=131081)
Nov 2 18:01:49 video vdr[8969]: receiver on device 3 thread started (pid=8969, tid=147466)
Nov 2 18:01:49 video vdr[8970]: TS buffer on device 3 thread started (pid=8970, tid=163851)
Nov 2 18:01:49 video vdr[8956]: max. latency time 2 seconds
Nov 2 18:01:49 video vdr[8956]: switching device 2 to channel 4
Nov 2 18:01:50 video vdr[8956]: timer 30 (4 1755-1805 'Test 2') start
Nov 2 18:01:50 video vdr[8956]: Title: 'Full House' Subtitle: ''
Nov 2 18:01:50 video vdr[8956]: record /video/Test_2/2004-11-02.17:55.00.00.rec
Nov 2 18:01:50 video vdr[8956]: creating directory /video/Test_2
Nov 2 18:01:50 video vdr[8956]: creating directory /video/Test_2/2004-11-02.17:55.00.00.rec
Nov 2 18:01:50 video vdr[8956]: recording to '/video/Test_2/2004-11-02.17:55.00.00.rec/001.vdr'
Nov 2 18:01:50 video vdr[8972]: file writer thread started (pid=8972, tid=180236)
Nov 2 18:01:50 video vdr[8973]: recording thread started (pid=8973, tid=196621)
Nov 2 18:05:00 video vdr[8968]: recording thread ended (pid=8968, tid=131081)
Nov 2 18:05:00 video vdr[8967]: file writer thread ended (pid=8967, tid=114696)
Nov 2 18:05:00 video vdr[8956]: buffer stats: 164312 (3%) used
Nov 2 18:05:00 video vdr[8956]: timer 29 (1 1755-1805 'Test') stop
Nov 2 18:05:00 video vdr[8956]: deleting timer 29
Nov 2 18:05:00 video vdr[8973]: recording thread ended (pid=8973, tid=196621)
Nov 2 18:05:00 video vdr[8970]: TS buffer on device 3 thread ended (pid=8970, tid=163851)
Nov 2 18:05:00 video vdr[8969]: buffer stats: 278052 (13%) used
Nov 2 18:05:00 video vdr[8969]: receiver on device 3 thread ended (pid=8969, tid=147466)
Nov 2 18:05:00 video vdr[8972]: file writer thread ended (pid=8972, tid=180236)
Nov 2 18:05:00 video vdr[8956]: buffer stats: 191008 (3%) used
Nov 2 18:05:00 video vdr[8956]: timer 29 (4 1755-1805 'Test 2') stop
Nov 2 18:05:00 video vdr[8956]: deleting timer 29
Anything else I could test?
Klaus
Home |
Main Index |
Thread Index