Hi!,
Recently I have connected my vdr box to my CRT 16:9 TV. I use the s-video(I want to use the rca tv-out for digital audio) connector of my epia M.10000.
I have followed some instructions to configure xorg with s-video out from this page:
http://www.kingcot.eclipse.co.uk/unichrome/unichromeTvOut.html
I don't know if this url is up to date. I have got see my wmaker desktop in my tv but when I start vdr with softdevice I get:
[softdevice] initializing Plugin [softdevice] Initializing Video Out [softdevice] ffmpeg build(3345920) [XvVideoOut]: osd_image shmid = 2686978 [XvVideoOut]: got osd_image: width 720 height 576, bytes per line 2880 [softdevice] Subplugin successfully opend [softdevice] Video Out seems to be OK [softdevice] Initializing Audio Out [softdevice] Audio out seems to be OK [softdevice] A/V devices initialized, now initializing MPEG2 Decoder X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 145 (MIT-SHM) Minor opcode of failed request: 3 (X_ShmPutImage) Value in failed request: 0x2ff Serial number of failed request: 337 Current serial number in output stream: 338
I hope anyone could help me to solve this problem. Another question... Do you know any url to learn about epia-m10000 s-video out and xorg?
Thanks.
Quoting Leo Márquez leo@calidae.net:
Hi!,
Recently I have connected my vdr box to my CRT 16:9 TV. I use the s-video(I want to use the rca tv-out for digital audio) connector of my epia M.10000.
I have followed some instructions to configure xorg with s-video out from this page:
http://www.kingcot.eclipse.co.uk/unichrome/unichromeTvOut.html
I don't know if this url is up to date. I have got see my wmaker desktop in my tv but when I start vdr with softdevice I get:
[softdevice] initializing Plugin [softdevice] Initializing Video Out [softdevice] ffmpeg build(3345920) [XvVideoOut]: osd_image shmid = 2686978 [XvVideoOut]: got osd_image: width 720 height 576, bytes per line 2880 [softdevice] Subplugin successfully opend [softdevice] Video Out seems to be OK [softdevice] Initializing Audio Out [softdevice] Audio out seems to be OK [softdevice] A/V devices initialized, now initializing MPEG2 Decoder X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 145 (MIT-SHM) Minor opcode of failed request: 3 (X_ShmPutImage) Value in failed request: 0x2ff
0x2ff = 767 = 768 - 1 768 is the default startup width.
So you can try to: a. start in full screen mode "-vo xv:full", which adjusts width and height to available max values (720 width in your case I guess). b. choose software OSD blending (via OSD :-( ) or via setup.conf: softdevice.OSDalphablend = 1
Serial number of failed request: 337 Current serial number in output stream: 338
Stefan Lucke
Hi Stefan and thanks for your answer. I have solved the problem starting softdevice in full screen. But after started it without problems now I get:
[softdevice] A/V devices initialized, now initializing MPEG2 Decoder X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 145 (MIT-SHM) Minor opcode of failed request: 3 (X_ShmPutImage) Value in failed request: 0x3ff Serial number of failed request: 250 Current serial number in output stream: 251
I have seen that is another value in failed request: 0x33ff. I have tried with OSDAlphablend value to 1 without luck. What is the 0x33ff value related to?
Thanks.
Stefan Lucke escribió:
Quoting Leo Márquez leo@calidae.net:
Hi!,
Recently I have connected my vdr box to my CRT 16:9 TV. I use the s-video(I want to use the rca tv-out for digital audio) connector of my epia M.10000.
I have followed some instructions to configure xorg with s-video out from this page:
http://www.kingcot.eclipse.co.uk/unichrome/unichromeTvOut.html
I don't know if this url is up to date. I have got see my wmaker desktop in my tv but when I start vdr with softdevice I get:
[softdevice] initializing Plugin [softdevice] Initializing Video Out [softdevice] ffmpeg build(3345920) [XvVideoOut]: osd_image shmid = 2686978 [XvVideoOut]: got osd_image: width 720 height 576, bytes per line 2880 [softdevice] Subplugin successfully opend [softdevice] Video Out seems to be OK [softdevice] Initializing Audio Out [softdevice] Audio out seems to be OK [softdevice] A/V devices initialized, now initializing MPEG2 Decoder X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 145 (MIT-SHM) Minor opcode of failed request: 3 (X_ShmPutImage) Value in failed request: 0x2ff
0x2ff = 767 = 768 - 1 768 is the default startup width.
So you can try to: a. start in full screen mode "-vo xv:full", which adjusts width and height to available max values (720 width in your case I guess). b. choose software OSD blending (via OSD :-( ) or via setup.conf: softdevice.OSDalphablend = 1
Serial number of failed request: 337 Current serial number in output stream: 338
Stefan Lucke
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
__________ Información de NOD32, revisión 1.1832 (20061025) __________
Este mensaje ha sido analizado con NOD32 antivirus system http://www.nod32.com
Quoting Leo Márquez leo@calidae.net:
Hi Stefan and thanks for your answer. I have solved the problem starting softdevice in full screen.
So "-vo xv:full" worked.
But after started it without problems now I get:
[softdevice] A/V devices initialized, now initializing MPEG2 Decoder X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 145 (MIT-SHM) Minor opcode of failed request: 3 (X_ShmPutImage) Value in failed request: 0x3ff
Which are the startup options now ? 0x3ff = 1023 = 1024 - 11
Did you changed your X resolution via "ALT"+"CTRL"+"Keypad +" ? can you show us the output of command xdpyinfo ? Which osd_image size was reported in that case ?
Serial number of failed request: 250 Current serial number in output stream: 251I have seen that is another value in failed request: 0x33ff. I have tried with OSDAlphablend value to 1 without luck. What is the 0x33ff value related to?
Thanks.
Stefan Lucke escribió:
Quoting Leo Márquez leo@calidae.net:
Hi!,
Recently I have connected my vdr box to my CRT 16:9 TV. I use the s-video(I want to use the rca tv-out for digital audio) connector of my epia M.10000.
I have followed some instructions to configure xorg with s-video out from this page:
http://www.kingcot.eclipse.co.uk/unichrome/unichromeTvOut.html
I don't know if this url is up to date. I have got see my wmaker desktop in my tv but when I start vdr with softdevice I get:
[softdevice] initializing Plugin [softdevice] Initializing Video Out [softdevice] ffmpeg build(3345920) [XvVideoOut]: osd_image shmid = 2686978 [XvVideoOut]: got osd_image: width 720 height 576, bytes per line 2880 [softdevice] Subplugin successfully opend [softdevice] Video Out seems to be OK [softdevice] Initializing Audio Out [softdevice] Audio out seems to be OK [softdevice] A/V devices initialized, now initializing MPEG2 Decoder X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 145 (MIT-SHM) Minor opcode of failed request: 3 (X_ShmPutImage) Value in failed request: 0x2ff
0x2ff = 767 = 768 - 1 768 is the default startup width.
So you can try to: a. start in full screen mode "-vo xv:full", which adjusts width and height to available max values (720 width in your case I guess). b. choose software OSD blending (via OSD :-( ) or via setup.conf: softdevice.OSDalphablend = 1
Serial number of failed request: 337 Current serial number in output stream: 338
Stefan Lucke
Hi again,
Stefan Lucke escribió:
/ But after started it without problems now I get:
/>/ />/ [softdevice] A/V devices initialized, now initializing MPEG2 Decoder />/ X Error of failed request: BadValue (integer parameter out of range for />/ operation) />/ Major opcode of failed request: 145 (MIT-SHM) />/ Minor opcode of failed request: 3 (X_ShmPutImage) />/ Value in failed request: 0x3ff / Which are the startup options now ? 0x3ff = 1023 = 1024 - 11
My startup options are only "-vo xv:full"
Did you changed your X resolution via "ALT"+"CTRL"+"Keypad +" ?
No but I press the 'f' key to toggle between fullscreen and windowed vdr mode. The second time I run vdr with -vo xv:full don't work
can you show us the output of command xdpyinfo ?
My xdpyinfo output command Is here:
name of display: :0.0 version number: 11.0 vendor string: The X.Org Foundation vendor release number: 70101000 X.Org version: 7.1.1 maximum request size: 16777212 bytes motion buffer size: 256 bitmap unit, bit order, padding: 32, LSBFirst, 32 image byte order: LSBFirst number of supported pixmap formats: 7 supported pixmap formats: depth 1, bits_per_pixel 1, scanline_pad 32 depth 4, bits_per_pixel 8, scanline_pad 32 depth 8, bits_per_pixel 8, scanline_pad 32 depth 15, bits_per_pixel 16, scanline_pad 32 depth 16, bits_per_pixel 16, scanline_pad 32 depth 24, bits_per_pixel 32, scanline_pad 32 depth 32, bits_per_pixel 32, scanline_pad 32 keycode range: minimum 8, maximum 255 focus: window 0x60000e, revert to Parent number of extensions: 29 BIG-REQUESTS DAMAGE DPMS Extended-Visual-Information GLX MIT-SCREEN-SAVER MIT-SHM MIT-SUNDRY-NONSTANDARD RANDR RENDER SECURITY SGI-GLX SHAPE SYNC TOG-CUP X-Resource XC-APPGROUP XC-MISC XFIXES XFree86-Bigfont XFree86-DGA XFree86-DRI XFree86-Misc XFree86-VidModeExtension XInputExtension XKEYBOARD XTEST XVideo XVideo-MotionCompensation default screen number: 0 number of screens: 1
screen #0: dimensions: 720x576 pixels (183x146 millimeters) resolution: 100x100 dots per inch depths (7): 24, 1, 4, 8, 15, 16, 32 root window id: 0x47 depth of root window: 24 planes number of colormaps: minimum 1, maximum 1 default colormap: 0x20 default number of colormap cells: 256 preallocated pixels: black 0, white 16777215 options: backing-store NO, save-unders NO largest cursor: 32x32 current input event mask: 0x58007f KeyPressMask KeyReleaseMask ButtonPressMask ButtonReleaseMask EnterWindowMask LeaveWindowMask PointerMotionMask SubstructureNotifyMask SubstructureRedirectMask PropertyChangeMask number of visuals: 12 default visual id: 0x22 visual: visual id: 0x22 class: TrueColor depth: 24 planes available colormap entries: 256 per subfield red, green, blue masks: 0xff0000, 0xff00, 0xff significant bits in color specification: 8 bits visual: visual id: 0x23 class: TrueColor depth: 24 planes available colormap entries: 256 per subfield red, green, blue masks: 0xff0000, 0xff00, 0xff significant bits in color specification: 8 bits visual: visual id: 0x24 class: TrueColor depth: 24 planes available colormap entries: 256 per subfield red, green, blue masks: 0xff0000, 0xff00, 0xff significant bits in color specification: 8 bits visual: visual id: 0x25 class: TrueColor depth: 24 planes available colormap entries: 256 per subfield red, green, blue masks: 0xff0000, 0xff00, 0xff significant bits in color specification: 8 bits visual: visual id: 0x26 class: TrueColor depth: 24 planes available colormap entries: 256 per subfield red, green, blue masks: 0xff0000, 0xff00, 0xff significant bits in color specification: 8 bits visual: visual id: 0x27 class: TrueColor depth: 24 planes available colormap entries: 256 per subfield red, green, blue masks: 0xff0000, 0xff00, 0xff significant bits in color specification: 8 bits visual: visual id: 0x28 class: TrueColor depth: 24 planes available colormap entries: 256 per subfield red, green, blue masks: 0xff0000, 0xff00, 0xff significant bits in color specification: 8 bits visual: visual id: 0x29 class: TrueColor depth: 24 planes available colormap entries: 256 per subfield red, green, blue masks: 0xff0000, 0xff00, 0xff significant bits in color specification: 8 bits visual: visual id: 0x2a class: TrueColor depth: 24 planes available colormap entries: 256 per subfield red, green, blue masks: 0xff0000, 0xff00, 0xff significant bits in color specification: 8 bits visual: visual id: 0x2b class: TrueColor depth: 24 planes available colormap entries: 256 per subfield red, green, blue masks: 0xff0000, 0xff00, 0xff significant bits in color specification: 8 bits visual: visual id: 0x2c class: TrueColor depth: 24 planes available colormap entries: 256 per subfield red, green, blue masks: 0xff0000, 0xff00, 0xff significant bits in color specification: 8 bits visual: visual id: 0x2d class: TrueColor depth: 24 planes available colormap entries: 256 per subfield red, green, blue masks: 0xff0000, 0xff00, 0xff significant bits in color specification: 8 bits
Which osd_image size was reported in that case ?
[setup-softdevice] startup aspect set to (16:9 wide) [softdevice] initializing Plugin [softdevice] Initializing Video Out [softdevice] ffmpeg build(3345920) [XvVideoOut]: osd_image shmid = 2129920 [XvVideoOut]: got osd_image: width 720 height 576, bytes per line 2880 [softdevice] Subplugin successfully opend [softdevice] Video Out seems to be OK [softdevice] Initializing Audio Out [softdevice] Audio out seems to be OK [softdevice] A/V devices initialized, now initializing MPEG2 Decoder X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 145 (MIT-SHM) Minor opcode of failed request: 3 (X_ShmPutImage) Value in failed request: 0x3ff Serial number of failed request: 250 Current serial number in output stream: 251
Another issue that I don't know if is related with the main topic is that when I start vdr correctly (only the first time) I don't get video. I'm using streamdev-client. In syslog I see:
[XvVideoOut]: (ERROR) could not grab any port! No video possible!
Thank you for you attention.
Hi!,
Recently I have connected my vdr box to my CRT 16:9 TV. I use the s-video(I want to use the rca tv-out for digital audio) connector of my epia M.10000.
I have followed some instructions to configure xorg with s-video out from this page:
http://www.kingcot.eclipse.co.uk/unichrome/unichromeTvOut.html
I don't know if this url is up to date. I have got see my wmaker desktop in my tv but when I start vdr with softdevice I get:
[softdevice] initializing Plugin [softdevice] Initializing Video Out [softdevice] ffmpeg build(3345920) [XvVideoOut]: osd_image shmid = 2686978 [XvVideoOut]: got osd_image: width 720 height 576, bytes per line 2880 [softdevice] Subplugin successfully opend [softdevice] Video Out seems to be OK [softdevice] Initializing Audio Out [softdevice] Audio out seems to be OK [softdevice] A/V devices initialized, now initializing MPEG2 Decoder X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 145 (MIT-SHM) Minor opcode of failed request: 3 (X_ShmPutImage) Value in failed request: 0x2ff
0x2ff = 767 = 768 - 1 768 is the default startup width.
So you can try to: a. start in full screen mode "-vo xv:full", which adjusts width and height to available max values (720 width in your case I guess). b. choose software OSD blending (via OSD :-( ) or via setup.conf: softdevice.OSDalphablend = 1
Serial number of failed request: 337 Current serial number in output stream: 338
Stefan Lucke
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
__________ Información de NOD32, revisión 1.1832 (20061025) __________
Este mensaje ha sido analizado con NOD32 antivirus system http://www.nod32.com
Quoting Leo Márquez:
Hi again,
Stefan Lucke escribió:
/ But after started it without problems now I get:
/>/ />/ [softdevice] A/V devices initialized, now initializing MPEG2 Decoder />/ X Error of failed request: BadValue (integer parameter out of range for />/ operation) />/ Major opcode of failed request: 145 (MIT-SHM) />/ Minor opcode of failed request: 3 (X_ShmPutImage) />/ Value in failed request: 0x3ff / Which are the startup options now ? 0x3ff = 1023 = 1024 - 11
My startup options are only "-vo xv:full"
Did you changed your X resolution via "ALT"+"CTRL"+"Keypad +" ?
No but I press the 'f' key to toggle between fullscreen and windowed vdr mode. The second time I run vdr with -vo xv:full don't work
Ah, I should have mentioned that you _must_ not toggle full screen -> windowed mode, as windowed mode works with some default values which even did not work previously (thats why I ask for full screen mode).
I'll send you a patch tomorrow that will restrict these values.
can you show us the output of command xdpyinfo ?
My xdpyinfo output command Is here:
name of display: :0.0 version number: 11.0 vendor string: The X.Org Foundation vendor release number: 70101000 X.Org version: 7.1.1
number of screens: 1
screen #0: dimensions: 720x576 pixels (183x146 millimeters) resolution: 100x100 dots per inch depths (7): 24, 1, 4, 8, 15, 16, 32
The resolution and #of screens I wanted to see (no further hint).
Which osd_image size was reported in that case ?
[setup-softdevice] startup aspect set to (16:9 wide) [softdevice] initializing Plugin [softdevice] Initializing Video Out [softdevice] ffmpeg build(3345920) [XvVideoOut]: osd_image shmid = 2129920 [XvVideoOut]: got osd_image: width 720 height 576, bytes per line 2880 [softdevice] Subplugin successfully opend [softdevice] Video Out seems to be OK [softdevice] Initializing Audio Out [softdevice] Audio out seems to be OK [softdevice] A/V devices initialized, now initializing MPEG2 Decoder X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 145 (MIT-SHM) Minor opcode of failed request: 3 (X_ShmPutImage) Value in failed request: 0x3ff Serial number of failed request: 250 Current serial number in output stream: 251
Another issue that I don't know if is related with the main topic is that when I start vdr correctly (only the first time) I don't get video. I'm using streamdev-client. In syslog I see:
[XvVideoOut]: (ERROR) could not grab any port! No video possible!
Oh, then I misunderstood you. Thought the it works the first time you called it. So did you ever or never get video ?
I like to ask for output of: xdpyinfo .
Thank you for you attention.
Stefan Lucke
Quoting Stefan Lucke:
Another issue that I don't know if is related with the main topic is that when I start vdr correctly (only the first time) I don't get video. I'm using streamdev-client. In syslog I see:
[XvVideoOut]: (ERROR) could not grab any port! No video possible!
Oh, then I misunderstood you. Thought the it works the first time you called it. So did you ever or never get video ?
I like to ask for output of: xdpyinfo .
Sorry, that should be: xvinfo .
Stefan Lucke
On Donnerstag 02 November 2006 23:38, Stefan Lucke wrote:
Quoting Leo Márquez:
Hi again,
Stefan Lucke escribió:
/ But after started it without problems now I get:
/>/ />/ [softdevice] A/V devices initialized, now initializing MPEG2 Decoder />/ X Error of failed request: BadValue (integer parameter out of range for />/ operation) />/ Major opcode of failed request: 145 (MIT-SHM) />/ Minor opcode of failed request: 3 (X_ShmPutImage) />/ Value in failed request: 0x3ff / Which are the startup options now ? 0x3ff = 1023 = 1024 - 11
My startup options are only "-vo xv:full"
Did you changed your X resolution via "ALT"+"CTRL"+"Keypad +" ?
No but I press the 'f' key to toggle between fullscreen and windowed vdr mode. The second time I run vdr with -vo xv:full don't work
Ah, I should have mentioned that you _must_ not toggle full screen -> windowed mode, as windowed mode works with some default values which even did not work previously (thats why I ask for full screen mode).
I'll send you a patch tomorrow that will restrict these values.
Ok, here comes the patch. I tested it with 640x480 resolution and now I do not get these failed request any more. In contrast to your setup, mine worked fine when setting "softdevice.OSDalphablend = 1" in vdr's setup.conf even without the patch.
Hi Stefan, thanks for your patch!!. Now I can start and toggle between fullscreen and windowed modes without problems. This patch will be included in cvs version or I have to apply to every new release? But ....I still with black screen. Now the syslog says:
Nov 5 20:35:16 dori vdr: [4461] [XvVideoOut]: XV_SWOV: available ports 68 - 68 Nov 5 20:35:16 dori vdr: [4461] [XvVideoOut]: XV_SWOV: format 0x30323449 is NOT in format list: Nov 5 20:35:16 dori vdr: [4461] [XvVideoOut]: 0x32595559[YUY2] Nov 5 20:35:16 dori vdr: [4461] [XvVideoOut]: 0x32315659[YV12] Nov 5 20:35:16 dori vdr: [4461] [XvVideoOut]: 0x434d5658[VIA] Nov 5 20:35:16 dori vdr: [4461] [XvVideoOut]: 0x35315652[RV15] Nov 5 20:35:16 dori vdr: [4461] [XvVideoOut]: 0x36315652[RV16] Nov 5 20:35:16 dori vdr: [4461] [XvVideoOut]: 0x32335652[RV32] Nov 5 20:35:16 dori vdr: [4461] [XvVideoOut]: (ERROR) could not grab any port! No video possible!
I'm lost. I have reinstalled libavformat and recompiled softdevic plugins. What means this error? In osd I don't get any error and vdr not crashes. I use streamdev-client and in the server I see corrects attach and detach.
Thanks in advance.
Stefan Lucke escribió:
On Donnerstag 02 November 2006 23:38, Stefan Lucke wrote:
Quoting Leo Márquez:
Hi again,
Stefan Lucke escribió:
/ But after started it without problems now I get:
/>/ />/ [softdevice] A/V devices initialized, now initializing MPEG2 Decoder />/ X Error of failed request: BadValue (integer parameter out of range for />/ operation) />/ Major opcode of failed request: 145 (MIT-SHM) />/ Minor opcode of failed request: 3 (X_ShmPutImage) />/ Value in failed request: 0x3ff / Which are the startup options now ? 0x3ff = 1023 = 1024 - 11
My startup options are only "-vo xv:full"
Did you changed your X resolution via "ALT"+"CTRL"+"Keypad +" ?
No but I press the 'f' key to toggle between fullscreen and windowed vdr mode. The second time I run vdr with -vo xv:full don't work
Ah, I should have mentioned that you _must_ not toggle full screen -> windowed mode, as windowed mode works with some default values which even did not work previously (thats why I ask for full screen mode).
I'll send you a patch tomorrow that will restrict these values.
Ok, here comes the patch. I tested it with 640x480 resolution and now I do not get these failed request any more. In contrast to your setup, mine worked fine when setting "softdevice.OSDalphablend = 1" in vdr's setup.conf even without the patch.
Index: video-xv.c
RCS file: /cvsroot/softdevice/softdevice/video-xv.c,v retrieving revision 1.63 diff -U3 -r1.63 video-xv.c --- video-xv.c 29 Sep 2006 19:17:18 -0000 1.63 +++ video-xv.c 3 Nov 2006 18:29:54 -0000 @@ -862,6 +862,23 @@ } } #endif
- /* -------------------------------------------------------------------------
- limit widht and height to screen dimensions
- */
- {
int screen_width, screen_height;- screen_width = DisplayWidth(dpy, scn_id);
- screen_height = DisplayHeight(dpy, scn_id);
- if (height > screen_height)
old_dheight = lheight = dheight = height = screen_height;- if (width > screen_width)
old_dwidth = lwidth = dwidth = width = screen_width;- }
- /* -------------------------------------------------------------------------
*/
- default settings which allow arbitraray resizing of the window
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
__________ Información de NOD32, revisión 1.1832 (20061025) __________
Este mensaje ha sido analizado con NOD32 antivirus system http://www.nod32.com
Hi again,
Probably caused by this problem softdevice always starts suspended but I can't change to playing. When I try it always kept the suspended state.
Thanks.
Leo Márquez escribió:
Hi Stefan, thanks for your patch!!. Now I can start and toggle between fullscreen and windowed modes without problems. This patch will be included in cvs version or I have to apply to every new release? But ....I still with black screen. Now the syslog says:
Nov 5 20:35:16 dori vdr: [4461] [XvVideoOut]: XV_SWOV: available ports 68 - 68 Nov 5 20:35:16 dori vdr: [4461] [XvVideoOut]: XV_SWOV: format 0x30323449 is NOT in format list: Nov 5 20:35:16 dori vdr: [4461] [XvVideoOut]: 0x32595559[YUY2] Nov 5 20:35:16 dori vdr: [4461] [XvVideoOut]: 0x32315659[YV12] Nov 5 20:35:16 dori vdr: [4461] [XvVideoOut]: 0x434d5658[VIA] Nov 5 20:35:16 dori vdr: [4461] [XvVideoOut]: 0x35315652[RV15] Nov 5 20:35:16 dori vdr: [4461] [XvVideoOut]: 0x36315652[RV16] Nov 5 20:35:16 dori vdr: [4461] [XvVideoOut]: 0x32335652[RV32] Nov 5 20:35:16 dori vdr: [4461] [XvVideoOut]: (ERROR) could not grab any port! No video possible!
I'm lost. I have reinstalled libavformat and recompiled softdevic plugins. What means this error? In osd I don't get any error and vdr not crashes. I use streamdev-client and in the server I see corrects attach and detach.
Thanks in advance.
Stefan Lucke escribió:
On Donnerstag 02 November 2006 23:38, Stefan Lucke wrote:
Quoting Leo Márquez:
Hi again,
Stefan Lucke escribió:
/ But after started it without problems now I get:
/>/ />/ [softdevice] A/V devices initialized, now initializing MPEG2 Decoder />/ X Error of failed request: BadValue (integer parameter out of range for />/ operation) />/ Major opcode of failed request: 145 (MIT-SHM) />/ Minor opcode of failed request: 3 (X_ShmPutImage) />/ Value in failed request: 0x3ff / Which are the startup options now ? 0x3ff = 1023 = 1024 - 11
My startup options are only "-vo xv:full"
Did you changed your X resolution via "ALT"+"CTRL"+"Keypad +" ?
No but I press the 'f' key to toggle between fullscreen and windowed vdr mode. The second time I run vdr with -vo xv:full don't work
Ah, I should have mentioned that you _must_ not toggle full screen -> windowed mode, as windowed mode works with some default values which even did not work previously (thats why I ask for full screen mode).
I'll send you a patch tomorrow that will restrict these values.
Ok, here comes the patch. I tested it with 640x480 resolution and now I do not get these failed request any more. In contrast to your setup, mine worked fine when setting "softdevice.OSDalphablend = 1" in vdr's setup.conf even without the patch.
Index: video-xv.c
RCS file: /cvsroot/softdevice/softdevice/video-xv.c,v retrieving revision 1.63 diff -U3 -r1.63 video-xv.c --- video-xv.c 29 Sep 2006 19:17:18 -0000 1.63 +++ video-xv.c 3 Nov 2006 18:29:54 -0000 @@ -862,6 +862,23 @@ } } #endif
- /*
- limit widht and height to screen dimensions
- */
- {
int screen_width, screen_height;- screen_width = DisplayWidth(dpy, scn_id);
- screen_height = DisplayHeight(dpy, scn_id);
- if (height > screen_height)
old_dheight = lheight = dheight = height = screen_height;- if (width > screen_width)
old_dwidth = lwidth = dwidth = width = screen_width;- }
- /*
- default settings which allow arbitraray resizing of the window
*/
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
__________ Información de NOD32, revisión 1.1832 (20061025) __________
Este mensaje ha sido analizado con NOD32 antivirus system http://www.nod32.com
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
__________ Información de NOD32, revisión 1.1852 (20061103) __________
Este mensaje ha sido analizado con NOD32 antivirus system http://www.nod32.com
Quoting Leo Márquez leo@calidae.net:
Hi Stefan, thanks for your patch!!. Now I can start and toggle between fullscreen and windowed modes without problems. This patch will be included in cvs version or I have to apply to every new release?
This will be included in cvs soon.
But ....I still with black screen. Now the syslog says:
Nov 5 20:35:16 dori vdr: [4461] [XvVideoOut]: XV_SWOV: available ports 68 - 68 Nov 5 20:35:16 dori vdr: [4461] [XvVideoOut]: XV_SWOV: format 0x30323449 is NOT in format list:
Ah, thats I420. So please select YV12 or YUY2 pixelformat via OSD, and you should get video too .
Nov 5 20:35:16 dori vdr: [4461] [XvVideoOut]: 0x32595559[YUY2] Nov 5 20:35:16 dori vdr: [4461] [XvVideoOut]: 0x32315659[YV12] Nov 5 20:35:16 dori vdr: [4461] [XvVideoOut]: 0x434d5658[VIA] Nov 5 20:35:16 dori vdr: [4461] [XvVideoOut]: 0x35315652[RV15] Nov 5 20:35:16 dori vdr: [4461] [XvVideoOut]: 0x36315652[RV16] Nov 5 20:35:16 dori vdr: [4461] [XvVideoOut]: 0x32335652[RV32] Nov 5 20:35:16 dori vdr: [4461] [XvVideoOut]: (ERROR) could not grab any port! No video possible!
Stefan Lucke
-
Leo Márquez -
Stefan Lucke