[linux-dvb] Twinhan DVB-T PCI

Henrik Jönsson xlntjone at gmail.com
Thu Apr 14 22:31:02 CEST 2005


Hello
I've got a problem I hope someone can help me whit. I have a Twinhan DTV 
Ter- CI split but I accidently did break the cabel between the CI-card 
and the tv-card, anyway thats not the problem. When i do modprobe like this:

modprobe bttv i2c_hw=1 card=0x71
modprobe dvb-bt8xx
modprobe dst dst_type=1

i get this men I do dmesg:
Linux video capture interface: v1.00
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 17 (level, low) -> IRQ 225
bttv0: Bt878 (rev 17) at 0000:02:07.0, irq: 225, latency: 32, mmio: 
0xf4000000
bttv0: detected: Twinhan VisionPlus DVB-T [card=113], PCI subsystem ID 
is 1822:0001
bttv0: using: Twinhan DST + clones [card=113,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00f500fd [init]
bttv0: using tuner=4
bttv0: add subdevice "dvb0"
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI interrupt 0000:02:07.1[A] -> GSI 17 (level, low) -> IRQ 225
bt878(0): Bt878 (rev 17) at 02:07.1, irq: 225, latency: 32, memory: 
0xf4001000
DVB: registering new adapter (bttv0).
dst_check_ci: unable to recognize  or DTT-CI
dst_check_ci please email linux-dvb at linuxtv.org with this type in
DST type : satellite
DST type flags : 0x4 symdiv
DVB: registering frontend 0 (DST DVB-S)...

My problem is now why wont the frontend register it as a DVB-T card. 
everthing else seems to be right except thoose last lines.

Do anyone have some idea what i can do to make it work?

Best regards
Henrik Jönsson




More information about the linux-dvb mailing list