[linux-dvb] Twinhan DVB-T PCI
manu at kromtek.com
Fri Apr 15 14:12:04 CEST 2005
Henrik Jönsson wrote:
> I've got a problem I hope someone can help me whit. I have a Twinhan DTV
> Ter- CI split but I accidently did break the cabel between the CI-card
> and the tv-card, anyway thats not the problem. When i do modprobe like
> modprobe bttv i2c_hw=1 card=0x71
> modprobe dvb-bt8xx
> modprobe dst dst_type=1
> i get this men I do dmesg:
> Linux video capture interface: v1.00
> bttv: driver version 0.9.15 loaded
> bttv: using 8 buffers with 2080k (520 pages) each for capture
> bttv: Bt8xx card found (0).
> ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
> ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 17 (level, low) -> IRQ 225
> bttv0: Bt878 (rev 17) at 0000:02:07.0, irq: 225, latency: 32, mmio:
> bttv0: detected: Twinhan VisionPlus DVB-T [card=113], PCI subsystem ID
> is 1822:0001
> bttv0: using: Twinhan DST + clones [card=113,insmod option]
> bttv0: gpio: en=00000000, out=00000000 in=00f500fd [init]
> bttv0: using tuner=4
> bttv0: add subdevice "dvb0"
> bt878: AUDIO driver version 0.0.0 loaded
> bt878: Bt878 AUDIO function found (0).
> ACPI: PCI interrupt 0000:02:07.1[A] -> GSI 17 (level, low) -> IRQ 225
> bt878(0): Bt878 (rev 17) at 02:07.1, irq: 225, latency: 32, memory:
> DVB: registering new adapter (bttv0).
> dst_check_ci: unable to recognize or DTT-CI
> dst_check_ci please email linux-dvb at linuxtv.org with this type in
> DST type : satellite
> DST type flags : 0x4 symdiv
> DVB: registering frontend 0 (DST DVB-S)...
> My problem is now why wont the frontend register it as a DVB-T card.
> everthing else seems to be right except thoose last lines.
I think you are using a bit old driver. Can you please update to the
latest dvb-kernel CVS and let know how it proceeds.. ?
BTW, which card are you using ? I mean the model number ?
If it is a new card, not identified by the driver, it would just say that ..
More information about the linux-dvb