[linux-dvb] Nexus-S rev 2.3

pnoname pnoname at wanadoo.fr
Tue Apr 19 20:57:33 CEST 2005


I wanted to add some more info, in case anybody could be interested...

Linux harmonie 2.6.11 #4 Mon Apr 18 08:20:21 CEST 2005 i686 GNU/Linux

============================== insmod.sh
.../dvb-kernel/build-2.6# ./insmod.sh load
Inserting DVB modules into kernel
FATAL: Module i2c_core not found.
FATAL: Module crc32 not found.
FATAL: Module firmware_class not found.
FATAL: Module videodev not found.
FATAL: Module v4l1_compat not found.
FATAL: Module v4l2_common not found.

============================== dmesg output
saa7146: found saa7146 @ mem e0e9e000 (revision 1, irq 19)
(0x13c2,0x000e).
DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S
rev2.3).
adapter has MAC addr = 00:d0:5c:24:b4:e2
dvb-ttpci: gpioirq unknown type=0 len=0
dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068,
app 8000261d
dvb-ttpci: firmware @ card 0 supports CI link layer interface
dvb-ttpci: Crystal audio DAC @ card 0 detected
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
DVB: registering frontend 0 (ST STV0299 DVB-S)...
dvb-ttpci: found av7110-0.
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget dvb /w video in'.
usbcore: registered new driver Technotrend/Hauppauge USB-Nova
usbcore: registered new driver ttusb-dec
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded
successfully
usbcore: registered new driver Technisat/B2C2 FlexCop II/IIb/III USB
usbcore: registered new driver cinergyT2
usbcore: registered new driver Twinhan DVB-T USB2.0
usbcore: registered new driver Yakumo/Hama/Typhoon DVB-T USB2.0
usbcore: registered new driver DiBcom based USB DVB-T devices
(DiB3000M-B based)
usbcore: registered new driver DiBcom based USB2.0 DVB-T (DiB3000M-C/P
based) devices
usbcore: registered new driver AVerMedia AverTV DVB-T USB 2.0 (A800)
usbcore: registered new driver Hauppauge WinTV-NOVA-T usb2
usbcore: registered new driver HanfTek UMT-010 USB2.0 DVB-T devices
.../dvb-kernel/build-2.6#

============================== scan output
harmonie:/usr/share/doc/dvb-utils# scan
examples/scan/dvb-s/Hotbird-13.0E | head
scanning examples/scan/dvb-s/Hotbird-13.0E
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 12539000 H 27500000 3
>>> tune to: 12539:h:0:27500
0x0000 0x2261: pmt_pid 0x1000 EUTELSAT -- SKYPLEX TXP91 (running)
0x0000 0x22c5: pmt_pid 0x1503 SkyMux -- Skyplex 10.1 (running)
0x0000 0x22c6: pmt_pid 0x150b SKYGATE -- PMT_5387_14-10-04 (running)
0x0000 0x22c8: pmt_pid 0x1502 OpenMux IP Gateway -- HitCast Data 1
(running)
0x0000 0x22c9: pmt_pid 0x1508 OpenMux IP Gateway -- HitCast S.Amer.
(running)

============================== szap output
harmonie:~# szap "TV5 EUROPE"
reading channels from file '/root/.szap/channels.conf'
zapping to 1373 'TV5 EUROPE':
sat 0, frequency = 11137 MHz H, symbolrate 27500000, vpid = 0x0dc2, apid
= 0x0e3a
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 03 | signal 7177 | snr 9d0e | ber 00004500 | unc 00000000 |
status 1f | signal b124 | snr bd87 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal b135 | snr bde4 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal b07d | snr bd90 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
s

============================== dvr0 output :-/
harmonie:/usr/share/doc/dvbtune/examples# cat /dev/dvb/adapter0/dvr0 >
output

harmonie:/usr/share/doc/dvbtune/examples# ls -l output
-rw-r--r--  1 root root 0 Apr 19 20:44 output
Any idea how to solve this ??? file size = "0"

There is surely better ways to manage with all of this, but i am really
new with this kind of stuff. I received the Nexus card on Saturday.

p










More information about the linux-dvb mailing list