[linux-dvb] - DEC3000s -- dvbscan fails - build channel list
with kaffeine fails -
spam at rockhopper.org
Thu Aug 11 17:37:38 CEST 2005
>> hmm, might be that way. But iirc there was a report from somebody with a
>> DEC2540t(which is basically a DEC2000t + CI slot) on this mailing
>> said that it only worked for not encrypted channels.
>> But probably you only know for sure if you try it yourself ;)
For sure, and will let you know. When I will have successfully seen on
my linux box not encrypted channels,
next step will be for encrypted channels!
Hope it will be soon.
>> The firmware is taken from the windows application.
Nice to know it. Whatever, I guess there is no way to hack it [to fix
unresolved bugs ;-) ].
>> have you checked if there is maybe a firmware update available?
I will phone to the technical support of hauppauge... I least I will try
to reach them ;-)
Because, I'm not sure their websites are up to date, and all versions of
their firwares freely downloadable.
(As far I know, the firmware 2.32 is not referenced from their website,
but available to who know where to get it.)
> Johann schrieb:
>> First of all thanks for your answers.
>> I'll try your proposal as soon as possible (I'm not at home for now!),
>> but I've yet some comments/questions related to your response.
>>>> no support for the CI of the dec2450t and the dec3000s, so no support
>> for any encrypted channels.
>> I guess dealing with the CAM is a job for the DEC3000s (since it's able
>> to decode encrypted channels in standalone mode).
>> So, I can understand a (DEC3000s) firmware is indirectly responsible of
>> channel decryption, but how the linux-dvb (driver) can be involved in
>> I was thinking (please remind I'm a newbie) linux-dvb is asking for a
>> decrypted stream using some informations (like channels, or
>> frequencies...) and linux-dvb is handling this stream, end of the story.
>> In other words, from PC/linux-dvb point of view handling not encrypted
>> or encrypted channel should be the same (at least for device like
>> DEC3000s that can run in standalone mode).
> hmm, might be that way. But iirc there was a report from somebody with
> a DEC2540t(which is basically a DEC2000t + CI slot) on this mailing
> list who said that it only worked for not encrypted channels.
> But probably you only know for sure if you try it yourself ;)
>> About the firmware, is it provided by hauppauge? If yes, is it the same
>> for hauppauge windows application or/and linux-dvb?
> The firmware is taken from the windows application.
>>>> AV711x chip is a "quite sensitive beast and hangs often".
>> I guess it's not only a driver problem (but firmware) since
>> unfortunately the DEC3000s is unstable in standalone mode too.
> have you checked if there is maybe a firmware update available?
More information about the linux-dvb