[linux-dvb] Pinnacle PCTV 300i: tuner module not supported yet ?

Rainer Schubert lintv at dl6hbo.inka.de
Fri Aug 26 09:19:07 CEST 2005


On Thu, 25 Aug 2005, Vesa Voutilainen wrote:

> Thank you Rainer,

Hi Vesa and the list,

you are welcome.

> about that video4linux patch, I've tried several, the latest make script has
> code in it, which won't compile saa7134-dvb module if kernel is lower than
> 12.

You do not need the video4linux patch for 2.6.12 or later.
As I promised yesterday, I have compiled linux-2.6.12.5 for my setup and
have found my card working at the first try.

> With older patches, I had several problems. This was the first that recognized
> card correctly.

Again: No patches needed for linux-2.6.12.5 !

> I'll look at that kernel 11 stuff again, but would really appreciate solution
> for this 12 series kernel.

Don't bother to do so. Just try 2.6.12.5 from kernel.org !

> From video4linux patch,
> Make.config:
> /..
> MDIR			:= v4l2
> snap			:= video4linux
>
> CONFIG_VIDEO_BTTV	:= m
> CONFIG_VIDEO_SAA7134	:= m
> CONFIG_VIDEO_IR		:= m
> CONFIG_VIDEO_TUNER	:= m
> CONFIG_VIDEO_TVAUDIO	:= m
> CONFIG_VIDEO_CX88	:= m
>
> CONFIG_VIDEO_ALSA	:= n

>From my /usr/src/linux/.config:

root at dl6hbo:~# cat /usr/src/linux/.config | grep "CONFIG_VIDEO_*"
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
CONFIG_VIDEO_STRADIS=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_DVB=m
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_DVB=m
# CONFIG_VIDEO_OVCAMCHIP is not set
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_VIDEO_VIDEOBUF=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_SELECT=y

> # doesn't build on kernels older than 2.6.12
>
> CONFIG_VIDEO_CX88_DVB	:= n
> CONFIG_VIDEO_SAA7134_DVB := n

Should be "m" instead of "n"

> ifneq ($(KERNELRELEASE),)
> need_dvb = $(shell test $(SUBLEVEL) -ge 12 && echo yes)
> endif
>
> ifeq ($(need_dvb),yes)
> CONFIG_VIDEO_CX88_DVB	:= m
> CONFIG_VIDEO_SAA7134_DVB := m
> endif
>
> ../

Regards,
Rainer
-- 
Rainer Schubert - Linux TV User
Amateur Radio Call DL6HBO




More information about the linux-dvb mailing list