[linux-dvb] pid 8192
johan postma
johan at linuxdomain.nl
Sun Aug 28 16:00:51 CEST 2005
hi list,
I have a Nexus-s (2.1) running on kernel 2.6.12 with the build-in dvb
drivers.
I want to multicast a transport stream with dvbstream. It should be possible to
capture a stream by using the 8192 pid but when i use it my system returns DMX
SET PES FILTER: Invalid argument. What does it mean and why is this not
working. Using other video pid's is working.
greetz,
johan
these are my modules:
Module Size Used by
dvb_ttpci 90792 0
dvb_core 76264 1 dvb_ttpci
saa7146_vv 45376 1 dvb_ttpci
video_buf 17092 1 saa7146_vv
saa7146 15204 2 dvb_ttpci,saa7146_vv
v4l1_compat 13636 1 saa7146_vv
v4l2_common 4736 1 saa7146_vv
videodev 7104 1 saa7146_vv
ves1820 5508 1 dvb_ttpci
stv0299 9668 1 dvb_ttpci
tda8083 5700 1 dvb_ttpci
stv0297 8576 1 dvb_ttpci
sp8870 7180 1 dvb_ttpci
firmware_class 7616 2 dvb_ttpci,sp8870
ves1x93 6340 1 dvb_ttpci
ttpci_eeprom 2304 1 dvb_ttpci
dvbstream v0.5 - (C) Dave Chapman 2001-2004
Released under the GPL.
Latest version available from http://www.linuxstb.org/
Using DVB card "ST STV0299 DVB-S"
tuning DVB-S to L-Band:0, Pol:V Srate=27500000, 22kHz=off
polling....
Getting frontend event
FE_STATUS:
polling....
Getting frontend event
FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC
Event: Frequency: 10874552
SymbolRate: 27500000
FEC_inner: 3
Bit error rate: 65280
Signal strength: 39750
SNR: 42255
FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC
Setting filter for PID 8192
FILTER 8192: DMX SET PES FILTER: Invalid argument
Using 224.0.1.2:5004:2
version=2
Streaming 1 stream
Caught signal 2 - closing cleanly.
----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
More information about the linux-dvb
mailing list