[linux-dvb] no such device with Cinergy 1200 DVB-C

Bernd Butscheidt bbutscheidt at yahoo.de
Sun Aug 28 23:39:00 CEST 2005


Am Sonntag, 28. August 2005 17:35 schrieb Christian Kaenzig:
>
> I didn't compile these things as modules so I can't list them, but I guess
> you're lacking the "budget" module and maybe also the budget_ci module. I
> have all three selected (budget, _ci, _av) because I didn't know exactly
> what was needed.
>
>
> I'm using 2.6.12. At my first attempt, I only selected budget_ci and had
> the same behavior.
>
> You can check if your card is correctly detected with "dmesg". Mine reads
> this :
>
> ---
> saa7146: register extension 'budget dvb'.
> saa7146: register extension 'budget dvb /w video in'.
> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12
> PCI: setting IRQ 12 as level-triggered
> ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 12 (level, low)
> -> IRQ 12
> saa7146: found saa7146 @ mem d8810000 (revision 1, irq 12) (0x153b,0x1156).
> DVB: registering new adapter (Terratec Cinergy 1200 DVB-C).
> adapter failed MAC signature check
> encoded MAC from EEPROM was
> ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
> budget-av: ci interface initialised.
> KNC1-0: MAC addr = 00:0a:ac:01:b3:c8
> DVB: registering frontend 0 (Philips TDA10021 DVB-C)...
> saa7146: register extension 'budget_ci dvb'.
> ---

I did the same and selected all three as build-in into the kernel
dmesg shows only this:

Linux video capture interface: v1.00
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget dvb /w video in'.
saa7146: register extension 'budget_ci dvb'.


Still something missing?

Bernd

	

	
		
___________________________________________________________ 
Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier anmelden: http://mail.yahoo.de





More information about the linux-dvb mailing list