[linux-dvb] twinhan 1025 sat-express

Sebastian Frei Sebastian at schnapsleichen.de
Thu Jul 21 14:28:55 CEST 2005


Am Mittwoch 20 Juli 2005 23:45 schrieb Marc Dirix:
> I've just gotten this card yesterday.
>
> I don't seem to get things just right, I'm using 2.6.12.3.
>
> If I don't connect my dreambox receiver between the dish and the dvb-s
> card I don't get any signal at all. If I connect it, I get poort signal.
>
> Using mplayer results in to slow video. While sound is working ok.
> My cpu runs @ 2.8Ghz which should be ok I believe?
>
>
> Using the windows software gives an ok picture, however I need to select
> a channel 2 or more times before I get signal ok. In between it
> complains the signal ain't ok.
>
> Signal on my dreambox is ok.
>
> This is szap output:
>
> status 1f | signal 2800 | snr 1300 | ber fffffffe | unc fffffffe
> |FE_HAS_LOCK status 1f | signal 2800 | snr 1300 | ber fffffffe | unc
> fffffffe |FE_HAS_LOCK status 1f | signal 2800 | snr 1300 | ber fffffffe |
> unc fffffffe |FE_HAS_LOCK status 1f | signal 2800 | snr 1300 | ber fffffffe
> | unc fffffffe |FE_HAS_LOCK
>
>
> Could this be a broken card? Or is this card really not supported?
>
> Thnx,
>
>
> Marc Dirix
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
The sat-express cards have _very_ bad tuners. I had two of those cards and 
sold both again, because they couldn't get a lock most of the times due to 
low signal. The driver works.

S.




More information about the linux-dvb mailing list