[linux-dvb] Hauppauge Nexus-S v2.3

Hubert Plattfaut hfred at ploeb.de
Thu Mar 10 23:08:50 CET 2005



Kenneth Aafløy schrieb:
> On Thursday 10 March 2005 05:10, Oliver Endriss wrote:
> 
>>It's just a new card revision.
>>
>>According to http://vdrportal.de/board/thread.php?postid=276932#post276932
>>there is a BSBE1-502A tuner on the card. This tuner is stv0299-based,
>>see http://www.linuxtv.org/pipermail/linux-dvb/2005-March/000386.html
> 
> 
> Ok, sounds good.
> 
> 
>>First of all you should check whether 13V/18V voltage switching and
>>22kHz signal generation work. If not you have to find out how the LNBP20
>>is wired to the GPIOs.
>>
>>Imho it should not be too difficult to make the driver work if you own
>>such a card. :-(
> 
> 
> Hubert, would you mind trying cvs with the attached patch then?

Kenneth,

thank you for the patch. I just updatet the cvs and ran then patch. 
Everything seems to load, except there is no crc32 modul. Is it 
neccessary? I have a crc32c.ko.

./insmod.sh:

Inserting DVB modules into kernel
FATAL: Module crc32 not found.
insmod: error inserting './b2c2-flexcop-pci.ko': -1 Unknown symbol in module

--------------------------- messages -----------------
Mar 10 22:16:59 nordlicht kernel: Linux video capture interface: v1.00
Mar 10 22:16:59 nordlicht kernel: saa7146: register extension 'dvb'.
Mar 10 22:16:59 nordlicht kernel: PCI: Found IRQ 11 for device 0000:00:0c.0
Mar 10 22:16:59 nordlicht kernel: PCI: Sharing IRQ 11 with 0000:00:08.0
Mar 10 22:16:59 nordlicht kernel: saa7146: found saa7146 @ mem e0f78000 
(revision 1, irq 11) (0x13c2,0x000e).
Mar 10 22:17:00 nordlicht kernel: DVB: registering new adapter 
(Technotrend/Hauppauge WinTV Nexus-S rev2.3).
Mar 10 22:17:00 nordlicht kernel: adapter has MAC addr = 00:d0:5c:24:de:d2
Mar 10 22:17:00 nordlicht kernel: dvb-ttpci: gpioirq unknown type=0 len=0
Mar 10 22:17:00 nordlicht kernel: dvb-ttpci: info @ card 0: firm 
f0240009, rtsl b0250018, vid 71010068, app 8000261c
Mar 10 22:17:00 nordlicht kernel: dvb-ttpci: firmware @ card 0 supports 
CI link layer interface
Mar 10 22:17:00 nordlicht kernel: dvb-ttpci: Crystal audio DAC @ card 0 
detected
Mar 10 22:17:00 nordlicht kernel: saa7146_vv: saa7146 (0): registered 
device video0 [v4l2]
Mar 10 22:17:01 nordlicht kernel: DVB: registering frontend 0 (ST 
STV0299 DVB-S)...
Mar 10 22:17:01 nordlicht kernel: No class name for input device DVB 
on-card IR receiver at <NULL><7>evdev_connect: evdev cdea4540 handle cd
ea455c name event3
Mar 10 22:17:01 nordlicht kernel: dvb-ttpci: found av7110-0.
Mar 10 22:17:01 nordlicht kernel: saa7146: register extension 'budget dvb'.
Mar 10 22:17:01 nordlicht kernel: saa7146: register extension 'budget_ci 
dvb'.
Mar 10 22:17:01 nordlicht kernel: saa7146: register extension 'budget 
dvb /w video in'.
Mar 10 22:17:01 nordlicht kernel: usbcore: registered new driver 
Technotrend/Hauppauge USB-Nova
Mar 10 22:17:01 nordlicht kernel: usbcore: registered new driver ttusb-dec
Mar 10 22:17:01 nordlicht kernel: usbcore: registered new driver DiBcom 
based USB Budget DVB-T device
Mar 10 22:17:01 nordlicht kernel: b2c2-flexcop: B2C2 FlexcopII/II(b)/III 
digital TV receiver chip loaded successfully
Mar 10 22:17:01 nordlicht kernel: usbcore: registered new driver 
Technisat/B2C2 FlexCop II/IIb/III USB
Mar 10 22:17:01 nordlicht kernel: b2c2_flexcop_pci: Unknown symbol pci_iomap
Mar 10 22:17:01 nordlicht kernel: b2c2_flexcop_pci: Unknown symbol 
pci_iounmap
Mar 10 22:17:01 nordlicht kernel: usbcore: registered new driver cinergyT2
----------------------------------

Now testing with dvbscan:

----------------------------------
nordlicht:~ # dvbscan /usr/share/dvb/dvb-s/Astra-19.2E
scanning /usr/share/dvb/dvb-s/Astra-19.2E
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 12551500 V 22000000 5
 >>> tune to: 12551:v:0:22000
WARNING: >>> tuning failed!!!
 >>> tune to: 12551:v:0:22000 (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
----------------------------------

Same as before. Then I made a test with the scan option of kaxtv. It 
finds the frontend but shows on the terminal:

----------------------------------
Using DVB card "ST STV0299 DVB-S"
tuning DVB-S to 12551000 v 22000000
inv:2 fecH:5
polling....
Getting frontend event
FE_GET_EVENT: Value too large for defined data type
dvbsi : Cant tune DVB
----------------------------------

???

Hubert.





More information about the linux-dvb mailing list