[linux-dvb] Pinnacle 200i

François-Xavier Payet Francois-Xavier.Payet at ens.insa-rennes.fr
Thu Mar 17 17:54:18 CET 2005


Thanks for your quick answer. I'm using a 2.6.11 kernel with video4linux, and 
when I do a 'modprobe saa7134 "card=50"' , my dmesg gives me this :

saa7130/34: v4l2 driver version 0.2.12 loaded
ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 7 (level, low) -> IRQ 7
saa7134[0]: found at 0000:01:09.0, rev: 1, irq: 7, latency: 32, mmio: 
0xde001000
saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV Stereo (saa7134) 
[card=26,autodetected]
saa7134[0]: board init: gpio is cc06000
tuner: chip found at addr 0xc0 i2c-bus saa7134[0]
tuner: type set to 33 (MT20xx universal) by saa7134[0]
tuner: microtune: companycode=3cbf part=42 rev=05
tuner: microtune MT2050 found, OK
tda9885/6/7: chip found @ 0x86
saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92
saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff ff
saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0

So, there's some things I don't understand :
	- Why isn't the module loaded with the card 50 as asked, but with a PCTV 
Stereo card
	- Why isn't the numeric tuner found

Thanks

FX
	

Le Jeudi 17 Mars 2005 17:01, Rainer Schubert a écrit :
> On Thu, 17 Mar 2005, [iso-8859-15] François-Xavier Payet wrote:
> > Hello,
>
> Hi Francois,
>
> > I can't figure how to make my pinnacle 200i DVB-T card works.
> >
> > lspci gives me :
> >
> > 0000:01:09.0 Multimedia controller: Philips Semiconductors SAA7134 (rev
> > 01) Subsystem: Pinnacle Systems Inc.: Unknown device 002d
> >        Flags: bus master, medium devsel, latency 32, IRQ 7
> >        Memory at de001000 (32-bit, non-prefetchable)
> >        Capabilities: [40] Power Management version 1
> >
> > But there seems to have no saa7134 drivers under the DVB section of the
> > kernel.
>
> Here is what my lspci -v says:
> 0000:00:0c.0 Multimedia controller: Philips Semiconductors SAA7134 (rev
> 01)
>          Subsystem: Pinnacle Systems Inc.: Unknown device 002d
>          Flags: bus master, medium devsel, latency 32, IRQ 19
>          Memory at e0102000 (32-bit, non-prefetchable) [size=1K]
>          Capabilities: [40] Power Management version 1
>
> Looks identical, doesn't it ?
>
> > Can somebody help me with this?
>
> I'll try to do my very best. :-)
>
> I have got a Pinnacle PCTV 300i card, which has got both analogue and
> digital TV tuners.
>
> The "dmesg" output looks like this:
> Linux video codec intermediate layer: v0.2
> tda9875: Ignoring new-style parameters in presence of obsolete ones
> saa7130/34: v4l2 driver version 0.2.12 loaded
> saa7130/34: snapshot date 2005-03-10
> ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 19 (level, low) -> IRQ 19
> saa7134[0]: found at 0000:00:0c.0, rev: 1, irq: 19, latency: 32, mmio:
> 0xe0102000
> saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i DVB-T + PAL
> [card=50,autodetected]
> saa7134[0]: board init: gpio is c806000
> saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92
> saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff ff
> saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff ff
> saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> tuner 0-0060: chip found @ 0xc0 (saa7134[0])
> tuner 0-0060: microtune: companycode=3cbf part=42 rev=2f
> tuner 0-0060: microtune MT2050 found, OK
> tda9885/6/7: chip found @ 0x86
> saa7134[0]: registered device video0 [v4l2]
> saa7134[0]: registered device vbi0
> USB Universal Host Controller Interface driver v2.2
> usbcore: registered new driver hpusbscsi
> saa7134[0]: pinnacle 300i dvb setup
> DVB: registering new adapter (saa7134[0]).
> DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
>
> What you need is at least a 2.6.10 kernel and the "video4linux" sources
> from http://dl.bytesex.org/cvs-snapshots/
>
> Next you'll have to compile your 2.6.10 kernel and install and run it.
> Under the running 2.6.10 kernel compile the video4linux source and if
> all goes well install the resulting modules.
>
> You could try "card=50" as an insmod/modprobe parameter for the saa7134
> module and let me know what dmesg says.
>
> > Thanks
> >
> > FX
>
> Regards,
> Rainer




More information about the linux-dvb mailing list