[linux-dvb] dec3000s on kubuntu 5.04

Markus Posch markus at posch.at
Fri Mar 25 08:57:00 CET 2005


hallo at all,

I'm using a Toshiba Sattelite P20 with Kubuntu 5.04 (I know its not 
released).

I want to use the dec3000s

The drivers are installed and hotplug is enabled in the kernel (a 
selfmade 2.6.10)

when i connecet the dec i get this in dmesg:

Mar 24 19:27:38 localhost kernel: usb 4-1: new full speed USB device 
using uhci_hcd and address 2
Mar 24 19:27:48 localhost usb.agent[7740]:      ttusb_dec: loaded 
successfully
Mar 24 19:27:48 localhost kernel: ttusb_dec: Firmware 
1.15<3>ttusb_dec_boot_dsp: Firmware (dvb-ttusb-dec-3000s.fw) unavailable.
Mar 24 19:27:48 localhost kernel: usb_unlink_urb() is deprecated for 
synchronous unlinks.  Use usb_kill_urb() instead.
Mar 24 19:27:48 localhost kernel: Badness in usb_unlink_urb at 
drivers/usb/core/urb.c:457
Mar 24 19:27:48 localhost kernel:  [pg0+545272413/1069679616] 
usb_unlink_urb+0x9d/0xa0 [usbcore]
Mar 24 19:27:48 localhost kernel:  [pg0+546534976/1069679616] 
ttusb_dec_exit_usb+0x30/0x60 [ttusb_dec]
Mar 24 19:27:48 localhost kernel:  [pg0+546535464/1069679616] 
ttusb_dec_probe+0x98/0x230 [ttusb_dec]
Mar 24 19:27:48 localhost kernel:  [pg0+545247378/1069679616] 
usb_probe_interface+0x72/0x90 [usbcore]
Mar 24 19:27:48 localhost kernel:  [driver_probe_device+47/128] 
driver_probe_device+0x2f/0x80
Mar 24 19:27:48 localhost kernel:  [driver_attach+92/160] 
driver_attach+0x5c/0xa0
Mar 24 19:27:48 localhost kernel:  [bus_add_driver+158/208] 
bus_add_driver+0x9e/0xd0
Mar 24 19:27:48 localhost kernel:  [pg0+545247632/1069679616] 
usb_register+0x50/0xc0 [usbcore]
Mar 24 19:27:48 localhost kernel:  [pg0+546385939/1069679616] 
ttusb_dec_init+0x13/0x40 [ttusb_dec]
Mar 24 19:27:48 localhost kernel:  [sys_init_module+338/496] 
sys_init_module+0x152/0x1f0
Mar 24 19:27:48 localhost kernel:  [sysenter_past_esp+82/117] 
sysenter_past_esp+0x52/0x75
Mar 24 19:27:48 localhost kernel: usb_unlink_urb() is deprecated for 
synchronous unlinks.  Use usb_kill_urb() instead.
Mar 24 19:27:48 localhost kernel: Badness in usb_unlink_urb at 
drivers/usb/core/urb.c:457
Mar 24 19:27:48 localhost kernel:  [pg0+545272413/1069679616] 
usb_unlink_urb+0x9d/0xa0 [usbcore]
Mar 24 19:27:48 localhost kernel:  [pg0+546534976/1069679616] 
ttusb_dec_exit_usb+0x30/0x60 [ttusb_dec]
Mar 24 19:27:48 localhost kernel:  [pg0+546535464/1069679616] 
ttusb_dec_probe+0x98/0x230 [ttusb_dec]
Mar 24 19:27:48 localhost kernel:  [pg0+545247378/1069679616] 
usb_probe_interface+0x72/0x90 [usbcore]
Mar 24 19:27:48 localhost kernel:  [driver_probe_device+47/128] 
driver_probe_device+0x2f/0x80
Mar 24 19:27:48 localhost kernel:  [driver_attach+92/160] 
driver_attach+0x5c/0xa0
Mar 24 19:27:48 localhost kernel:  [bus_add_driver+158/208] 
bus_add_driver+0x9e/0xd0
Mar 24 19:27:48 localhost kernel:  [pg0+545247632/1069679616] 
usb_register+0x50/0xc0 [usbcore]
Mar 24 19:27:48 localhost kernel:  [pg0+546385939/1069679616] 
ttusb_dec_init+0x13/0x40 [ttusb_dec]
Mar 24 19:27:48 localhost kernel:  [sys_init_module+338/496] 
sys_init_module+0x152/0x1f0
Mar 24 19:27:48 localhost kernel:  [sysenter_past_esp+82/117] 
sysenter_past_esp+0x52/0x75
Mar 24 19:27:48 localhost kernel: usb_unlink_urb() is deprecated for 
synchronous unlinks.  Use usb_kill_urb() instead.
Mar 24 19:27:48 localhost kernel: Badness in usb_unlink_urb at 
drivers/usb/core/urb.c:457
Mar 24 19:27:48 localhost kernel:  [pg0+545272413/1069679616] 
usb_unlink_urb+0x9d/0xa0 [usbcore]
Mar 24 19:27:48 localhost kernel:  [pg0+546534976/1069679616] 
ttusb_dec_exit_usb+0x30/0x60 [ttusb_dec]
Mar 24 19:27:48 localhost kernel:  [pg0+546535464/1069679616] 
ttusb_dec_probe+0x98/0x230 [ttusb_dec]
Mar 24 19:27:48 localhost kernel:  [pg0+545247378/1069679616] 
usb_probe_interface+0x72/0x90 [usbcore]
Mar 24 19:27:48 localhost kernel:  [driver_probe_device+47/128] 
driver_probe_device+0x2f/0x80
Mar 24 19:27:48 localhost kernel:  [driver_attach+92/160] 
driver_attach+0x5c/0xa0
Mar 24 19:27:48 localhost kernel:  [bus_add_driver+158/208] 
bus_add_driver+0x9e/0xd0
Mar 24 19:27:48 localhost kernel:  [pg0+545247632/1069679616] 
usb_register+0x50/0xc0 [usbcore]
Mar 24 19:27:48 localhost kernel:  [pg0+546385939/1069679616] 
ttusb_dec_init+0x13/0x40 [ttusb_dec]
Mar 24 19:27:48 localhost kernel:  [sys_init_module+338/496] 
sys_init_module+0x152/0x1f0
Mar 24 19:27:48 localhost kernel:  [sysenter_past_esp+82/117] 
sysenter_past_esp+0x52/0x75
Mar 24 19:27:48 localhost kernel: usb_unlink_urb() is deprecated for 
synchronous unlinks.  Use usb_kill_urb() instead.
Mar 24 19:27:48 localhost kernel: Badness in usb_unlink_urb at 
drivers/usb/core/urb.c:457
Mar 24 19:27:48 localhost kernel:  [pg0+545272413/1069679616] 
usb_unlink_urb+0x9d/0xa0 [usbcore]
Mar 24 19:27:48 localhost kernel:  [pg0+546534976/1069679616] 
ttusb_dec_exit_usb+0x30/0x60 [ttusb_dec]
Mar 24 19:27:48 localhost kernel:  [pg0+546535464/1069679616] 
ttusb_dec_probe+0x98/0x230 [ttusb_dec]
Mar 24 19:27:48 localhost kernel:  [pg0+545247378/1069679616] 
usb_probe_interface+0x72/0x90 [usbcore]


Why this:
Mar 24 19:27:48 localhost kernel: ttusb_dec: Firmware 
1.15<3>ttusb_dec_boot_dsp: Firmware (dvb-ttusb-dec-3000s.fw) unavailable.

The firmaware has the right name and is placed in /usr/lib/hotplug/firmware

there is no atapter and frontend available, but i think this will be 
solved if the firmaware loads correctly????

please help me!!!


greets
markus






More information about the linux-dvb mailing list