[linux-dvb] Tuner for Laptop Asus W2V Question

Philippe Le Gal philippe.legal at tele2.fr
Sun Oct 9 10:03:16 CEST 2005


Hello Hartmut

Thank for the quick answer.
I've downloaded the last v4l driver (August 2005)

No errors during make but some error during make install.
But files (*.ko) are at the right place.

Eliminating old V4L modules (errors on this step is not a problem)..
make: [rminstall] Erreur 1 (ignorée)

make install 

Installing new V4L modules at corresponding Kernel dir...
install -d /lib/modules/2.6.11.4-21.9-default/kernel/drivers/media/common
install -m 644 -c 
ir-common.ko /lib/modules/2.6.11.4-21.9-default/kernel/drivers/media/common
install -d /lib/modules/2.6.11.4-21.9-default/kernel/drivers/media/video
install -m 644 -c btcx-risc.ko bttv.ko tda9887.ko tuner.ko tvaudio.ko 
tveeprom.ko tvmixer.ko v4l1-compat.ko v4l2-common.ko video-buf.ko 
video-buf-dvb.ko ir-kbd-gpio.ko ir-kbd-i2c.ko 
msp3400.ko /lib/modules/2.6.11.4-21.9-default/kernel/drivers/media/video
install: cannot stat `video-buf-dvb.ko': No such file or directory
make: [install] Erreur 1 (ignorée)
install -d /lib/modules/2.6.11.4-21.9-default/kernel/drivers/media/video/cx88
install -m 644 -c cx8800.ko cx8801.ko cx8802.ko  cx88-blackbird.ko cx88xx.ko 
cx88-dvb.ko /lib/modules/2.6.11.4-21.9-default/kernel/drivers/media/video/cx88
install: cannot stat `cx88-dvb.ko': No such file or directory
make: [install] Erreur 1 (ignorée)
install 
-d /lib/modules/2.6.11.4-21.9-default/kernel/drivers/media/video/saa7134
install -m 644 -c saa6752hs.ko saa7134.ko saa7134-empress.ko 
saa7134-dvb.ko /lib/modules/2.6.11.4-21.9-default/kernel/drivers/media/video/saa7134
install: cannot stat `saa7134-dvb.ko': No such file or directory
make: [install] Erreur 1 (ignorée)
/sbin/depmod -a

after I load the module :

modprobe saa7134

And here is the result of dmesg

Linux video capture interface: v1.00
ir_common: module not supported by Novell, setting U taint flag.
v4l1_compat: module not supported by Novell, setting U taint flag.
v4l2_common: module not supported by Novell, setting U taint flag.
video_buf: module not supported by Novell, setting U taint flag.
saa7134: module not supported by Novell, setting U taint flag.
saa7130/34: is wrong in my  v4l2 driver version 0.2.14 loaded
saa7130/34: snapshot date 2005-08-01
ACPI: PCI interrupt 0000:03:02.0[A] -> GSI 11 (level, low) -> IRQ 11
saa7133[0]: found at 0000:03:02.0, rev: 209, irq: 11, latency: 64, mmio: 
0xfeafa800
saa7133[0]: subsystem: 5168:0307, board: AOPEN VA1000 POWER [card=17,insmod 
option]
saa7133[0]: board init: gpio is 50000
saa7133[0]: dsp access wait timeout [bit=WRR]
saa7133[0]: dsp access wait timeout [bit=WRR]
saa7133[0]: dsp access wait timeout [bit=WRR]
saa7133[0]: i2c eeprom 00: 68 51 07 03 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: 00 ff 62 0f ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 ed ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tuner: module not supported by Novell, setting U taint flag.
 : chip found @ 0x96 (saa7133[0])
tuner 0-004b: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles))
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0

And the tuner still not working

What is wrong in what i do ?

Thanks

Philippe


Le Samedi 8 Octobre 2005 21:38, vous avez écrit :
> Hi, Philippe
>
> Please do the following:
> Get a recent version of the driver from the video4linux CVS at
> www.linuxtv.org. It creates a longer eeprom dump. I can tell the
> configuration and tuner type from it If the card works with un-
> modified Philips drivers.
>
> Best regards
>     Hartmut
>
> > #dmesg
> > saa7130/34: v4l2 driver version 0.2.12 loaded
> > ACPI: PCI interrupt 0000:03:02.0[A] -> GSI 11 (level, low) -> IRQ 11
> > saa7133[0]: found at 0000:03:02.0, rev: 209, irq: 11, latency: 64, mmio:
> > 0xfeafa800
> > saa7133[0]: subsystem: 5168:0307, board: AOPEN VA1000 POWER
> > [card=17,insmod option]
> > saa7133[0]: board init: gpio is 50000
> > saa7133[0]: dsp access wait timeout [bit=WRR]
> > saa7133[0]: dsp access wait timeout [bit=WRR]
> > saa7133[0]: i2c eeprom 00: 68 51 07 03 54 20 1c 00 43 43 a9 1c 55 d2 b2
> > 92 saa7133[0]: i2c eeprom 10: 00 ff 62 0f ff 20 ff ff ff ff ff ff ff ff
> > ff ff saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 ed ff
> > ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff
> > ff ff ff ff saa7133[0]: registered device video0 [v4l2]
> > saa7133[0]: registered device vbi0



More information about the linux-dvb mailing list