[linux-dvb] Partially resolved HDTV5 lite and Twinhan DST
together + dst module question
gfarris at pacbell.net
Fri Oct 14 02:03:43 CEST 2005
That didn't lock up, so yes, the order does matter.
However, the analog still doesn't work.
Just a thought-- perhaps the HDTV5 lite needs to be bttv0 for the analog to work since /dev/video0 and /dev/vbi0 is assigned to the lite even when it's the 2nd card, since the DST has no analog.
Next I tried swapping the pci cards back where they were originally, but now I get a lockup no matter which card is specified first in the bttv line. I also tried specifying only one card at a time, but it still locks up when the DST is the 2nd pci card.
It looks like the DST card has to be resolved before the lite card or there is a lockup.
Any other ideas?
Manu Abraham <abraham.manu at gmail.com> wrote:
> Thanks for the response. Unfortunately that didn't fix it.
> I tried both on the same line:
> bttv card=0x71 i2c_hw=1 card=0x87 i2c_hw=0
> That locked up!
can you try bttv card=0x87 i2c_hw=0 card=0x71 i2c_hw=1
just try out to see whether the order does matter.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the linux-dvb