[linux-dvb] [PATCH] Add pll information for some NXT2002 and
NXT2004 based cards
kirk.lapray at gmail.com
Sun Oct 23 23:00:16 CEST 2005
According to the information I found it said 57MHz.
Here is what I found:
The tuner and NXT2004 demodulator chip are integrated into the TUV1236D
Network Interface Module. I don't think there is a specific Philips tuner
used. From what I understand the NXT2004 also demodulates the analog signal.
A Conexant CX88 chip is then used to interface with the PCI bus and adds
video and svideo inputs.
On 10/23/05, CityK <CityK at rogers.com> wrote:
> Michael Krufky wrote:
> > Kirk Lapray wrote:
> >> I have added support for several cards that use the NXT2002 or
> >> NXT2004 demodulator.
> >> These will be used in a new NXT200X driver that incorporates the
> >> NXT2002 driver and adds support for a couple NXT2004 based cards.
> >> * dvb-pll.h, dvb-pll.c:
> >> - Added support for the following:
> >> Philips TUV1236D - ATI HDTV Wonder
> >> ALPS TDHU2 - AverTVHD MCE A180
> >> Samsung TBMV30111IN - Air2PC ATSC - 2nd generation
> >> Signed-off-by: Kirk Lapray <kirk.lapray at gmail.com
> >> <mailto:kirk.lapray at gmail.com>>
> > Kirk-
> > I've applied your patch to dvb-kernel cvs, thanks.
> In the patch, shouldn't the min. Fq. for the Philips TUV1236D be 54MHz ?
> Unrelated to the patch, could you, or anyone else for that matter, ID
> the (Philips?) tuner and analog demodulator ICs used in the TUV1236D.
> -- Cheers, CK
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the linux-dvb