[linux-dvb] Pinnacle PCTV Sat/400i - Channels - parallel using

[Lukas Kasprowicz]

Some additional information:

I unplugged the sat cable from the PCTV Sat and the 400i does not lock any 
channels.

then i plugged a cable to the sat without cable in the 400i, booted and there 
was only one adapter left in /dev/dvb.

halted the host, to put in both cables, still only one adapter in dvb.  :(

checked irq in bios and sound card had the same like the PCTV Sat.

plugged the sat into another PCI, booted, both adapter available...

The pctv sat tunes, the 400i does not tune anymore to any channel.
signal varies from 2727 to e1e1 signal was before ~8e8e to 9898 


PCTV Sat is: bttv1
PCTV 400i is: bttv0

/proc/interrupts:
           CPU0
  0:     350310          XT-PIC  timer
  1:         10          XT-PIC  i8042
  2:          0          XT-PIC  cascade
  4:          1          XT-PIC  serial
  5:          2          XT-PIC  ehci_hcd:usb1
  8:          2          XT-PIC  rtc
  9:          0          XT-PIC  acpi
 10:          0          XT-PIC  uhci_hcd:usb3, CMI8738-MC6
 11:     808008          XT-PIC  uhci_hcd:usb2, bttv1, bt878, eth0, nvidia
 12:      40729          XT-PIC  uhci_hcd:usb4, bttv0, bt878
 14:      10664          XT-PIC  ide0
 15:       4482          XT-PIC  ide1
NMI:          0
LOC:     350314
ERR:        337


Lukas
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
Url : http://www.linuxtv.org/pipermail/linux-dvb/attachments/20050908/9e096672/attachment.pgp