[linux-dvb] How can i get this card to run?

Martin Prochnow martinprochnow at yahoo.de
Sun Feb 19 20:04:36 CET 2006


Hi,

i bought a used dvb-s card, the seller said, it is a
Technotrend Budget 1.1 / WinTV Nova-S. This card has a
SAA7130 and a Philips SU1278/SHA tuner with a
STV0299B.

lspci -xv says:
0000:00:11.0 Multimedia controller: Philips
Semiconductors SAA7130 Video Broadcast Decoder (rev
01)
        Flags: bus master, medium devsel, latency 64,
IRQ 11
        Memory at fecff800 (32-bit, non-prefetchable)
[size=1K]
        Capabilities: [40] Power Management version 1
00: 31 11 30 71 06 00 90 02 01 00 80 04 00 40 00 00
10: 00 f8 cf fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 ff ff

lscpi -vn says:
0000:00:11.0 0480: 1131:7130 (rev 01)
        Flags: bus master, medium devsel, latency 64,
IRQ 11
        Memory at fecffc00 (32-bit, non-prefetchable)
[size=1K]
        Capabilities: [40] Power Management version 1

If i load the saa7134_dvb kernel module i got this
message in the logs:
Feb 18 16:28:55 vdr kernel: saa7130/34: v4l2 driver
version 0.2.14 loaded
Feb 18 16:28:55 vdr kernel: ACPI: PCI Interrupt
0000:00:13.0[A] -> Link [LNKA] -> GSI 11 (level, low)
-> IRQ 11
Feb 18 16:28:55 vdr kernel: saa7130[0]: quirk:
PCIPCI_NATOMA
Feb 18 16:28:55 vdr kernel: saa7130[0]: found at
0000:00:13.0, rev: 1, irq: 11, latency: 64, mmio:
0xfecff800
Feb 18 16:28:55 vdr kernel: saa7130[0]: subsystem:
ffff:ffff, board: UNKNOWN/GENERIC
[card=0,autodetected]
Feb 18 16:28:55 vdr kernel: saa7130[0]: board init:
gpio is 0
Feb 18 16:28:55 vdr kernel: saa7130[0]: i2c eeprom 00:
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Feb 18 16:28:55 vdr kernel: saa7130[0]: i2c eeprom 10:
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Feb 18 16:28:55 vdr kernel: saa7130[0]: i2c eeprom 20:
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Feb 18 16:28:55 vdr kernel: saa7130[0]: i2c eeprom 30:
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Feb 18 16:28:55 vdr kernel: saa7130[0]: i2c eeprom 40:
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Feb 18 16:28:55 vdr kernel: saa7130[0]: i2c eeprom 50:
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Feb 18 16:28:55 vdr kernel: saa7130[0]: i2c eeprom 60:
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Feb 18 16:28:55 vdr kernel: saa7130[0]: i2c eeprom 70:
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Feb 18 16:28:55 vdr kernel: saa7130[0]: registered
device video1 [v4l2]
Feb 18 16:28:55 vdr kernel: saa7130[0]: registered
device vbi0

I found nothing valuable at the internet, so my
question is: how can i get this card to run with
linux?

Greets
Martin



	

	
		
___________________________________________________________ 
Telefonate ohne weitere Kosten vom PC zum PC: http://messenger.yahoo.de



More information about the linux-dvb mailing list