[linux-dvb] Dvico Fusion Dual Digital lircd problem

Craig Cook cncook001 at yahoo.com
Tue Feb 21 12:18:31 CET 2006


It looks like the USB/IR port is recognised, but I have problems with the lircd config. 
  
 $ rpm -qa | grep lirc
 lirc-kmdl-2.6.15-1.1830_FC4-0.8.0-55.rhfc4.at
 lirc-kmdl-2.6.15-1.1831_FC4-0.8.0-55.rhfc4.at
 lirc-lib-0.8.0-55.rhfc4.at
 lirc-0.8.0-55.rhfc4.at
 lirc-devices-0.7.0-1.rhfc4.at
 
 [dmesg output]
 usb 3-1: new low speed USB device using uhci_hcd and address 2
 input: Logitech Optical USB Mouse as /class/input/input1
 input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-1
 dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual USB' in warm state.
 dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
 DVB: registering new adapter (DViCO FusionHDTV DVB-T Dual USB).
 dvb-usb: recv bulk message failed: -110
 DVB: registering frontend 1 (Zarlink MT352 DVB-T)...
 input: IR-receiver inside an USB DVB receiver as /class/input/input2
 dvb-usb: schedule remote query interval to 150 msecs.
 dvb-usb: DViCO FusionHDTV DVB-T Dual USB successfully initialized and connected.
 usbcore: registered new driver dvb_usb_cxusb
 
 /etc/lircd.conf
 # this config file was automatically generated
 # using lirc-0.7.3-CVS(dvico) on Thu Sep  1 21:36:06 2005
 #
 # contributed by: David Bussenschutt <buzz|oska.com>
 #
 # brand:     "DViCO"
 # model no. of remote control:  "Fusion Remote MCE"
 # devices being controlled by this remote: My MythTV install
 #
 
 begin remote
 
   name  DVICO_MCE
 [snip]
 
 I'm confused on the exact settings though.  I get the lircd running (service lircd start), but when I run irw it crashes.  
 
 tail /var/log/messages
 Feb 21 20:58:26 localhost lircd-0.8.0[2582]: accepted new client on /dev/lircd
 Feb 21 20:58:26 localhost lircd-0.8.0[2582]: could not get file information for /dev/lirc
 Feb 21 20:58:26 localhost lircd-0.8.0[2582]: default_init(): No such file or directory
 Feb 21 20:58:26 localhost lircd-0.8.0[2582]: caught signal
 
 # ls /dev/lir*
 /dev/lircd
 
 $ cat /proc/bus/usb/devices
 [snip]
 T:  Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
 D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
 P:  Vendor=0fe9 ProdID=db51 Rev= 3.00
 S:  Manufacturer=Dvico
 S:  Product=Bluebird
 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
 I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=dvb_usb_cxusb
 E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
 E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
 E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
 I:  If#= 0 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=dvb_usb_cxusb
 E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
 E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
 E:  Ad=82(I) Atr=01(Isoc) MxPS=3030 Ivl=125us
 [snip]
 
 Any ideas?
 
 Thanks
 
 Craig Cook
 
		
---------------------------------
 
 What are the most popular cars? Find out at Yahoo! Autos 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20060221/d0fdfdf1/attachment.htm


More information about the linux-dvb mailing list